Beli Efem Mesin Penguliran Internal bekas (83.487)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Filettatrice sisir rata TLM RP8 Berfungsi sepenuhnya, siap pakai. Tersedia untuk uji coba di bengkel mekanik kami. TLM RP8 Informasi teknis: Tahun: 1995 Rentang diameter: 3 – 8 mm Panjang poros di bawah kepala: 90 mm Panjang ulir maks.: 52 mm Iaodeyzqzbspfx Aa Djw Ukuran dies: 130/115x54 mm Kecepatan: 420 pcs/menit Vibratory feeder Tersedia di H.B.R. srl - Italia

Tahun pembuatan: 1972, Kondisi: bekas, Maximum pulling force: 10 t Isdjcdtnhspfx Aa Deaw Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling Iodpfx Aajuz If Ns Djaw - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Iajdpfxjh A S Hte Aa Dow Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: SIEMENS SINUMERIK 810, panjang benda kerja (maks.): 830 mm, kecepatan minimum spindel milling: 100 rpm, kecepatan spindle milling (maks.): 4.500 rpm, diameter pemasangan: 78 mm, technical-details-milling-lathe Iedpfoyl U Tuex Aa Deaw

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Chun Zu CPR Series thread rolling machine Thread diameter range: 2 - 42 mm Thread length range: 3 - 250 mm Iaedjw Dn Epjpfx Aa Dow Shank length under head: 3 - 350 mm Maximum rolling force: 150,000 kgf Frame &

Kondisi: sangat baik (bekas), de-001 Iaedpfxjylbhxs Aa Dew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 063/09, panjang ulir: 50 mm, diameter benda kerja (maks.): 6 mm, Mesin Ulir SMART MACHINERY NG S-DD Berfungsi dengan sempurna, saat ini dalam produksi. Tahun: 2009 Incoterm: EXW Calolziocorte (LC) Mesin ini secara otomatis mengatur pergantian langkah. Mesin ulir NG S-DD dirancang untuk mengubah langkah sled sesuai dengan panjang sisir yang digunakan. Diameter minimum: 1 mm. Diameter maksimum: 6 mm. Panjang ulir maksimum: 50 mm. Panjang rivet maksimum: 80 mm. Kapasitas produksi maksimal: 700 pcs/menit. Ijdpfeyycr Nox Aa Djaw Daya motor utama: 13,9 kW Daya listrik terpasang: 16 kW

Kondisi: bekas, Internal diameter: 340/440 mm Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Iedpfx Aed Ih Dxea Djaw Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2003, innenschleifmaschine-01 Ijdpfxsuxft Sj Aa Dsaw

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 32 kg, tegangan masuk: 230 V, Automatic internal lubrication – coolant is delivered directly to the core drill, which increases tool life and work quality. STEPPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined. Morse taper MT4 allows installation of various tools such as twist drills, countersinks, reamers, tapping attachments, or hole saws. Powerful high-torque motor with soft start and overload protection ensures reliable operation. Powerful electromagnet securely holds the machine in place during operation. Ergonomic control panel allows quick and intuitive setup of operating parameters. Robust machine construction increases stability and minimizes vibration during machining. Wide range of applications – ideal for industrial, workshop, and service use. Technical Specifications Drilling diameter (core drill): 100 mm Drilling depth (core drill): 100 mm Drilling diameter (twist drill): 38 mm Height adjustment of drill head: 275 mm Max tapping capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed range – number of steps / stepless: 1. 50 – 110 / 2. 20 – 200 / 3. 200 – 500 / 4. 320–800 Spindle taper: MT4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. base plate: 165 mm Magnetic holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2580 W Voltage: 230 V Width: 330 mm Depth: 430 mm Ijdpfx Aaoyt I Uus Deaw Height: 830 mm Weight approx.: 31.5 kg

Kondisi: bekas, Mesin pembuat ulir LORCH, SCHMIDT & Co Tinggi pusat: 200 mm Jarak antara pusat: 400 mm Kecepatan putar spindle: 56 rpm Diameter chuck: 160 mm Perjalanan tailstock: 45 mm Kerucut dalam tailstock: MK2 Iodpsxf Uwxsfx Aa Djaw Daya motor: 0,25 HP Sambungan listrik: 380 Volt, 50 Hz - Putaran kanan dan kiri - Chuck 3 rahang - Penggerak spindle melalui motor gearbox - Tanpa lubang spindle tembus - Tailstock dengan pinol tuas - Chuck bor MAS 1 hingga 16 mm Kebutuhan ruang P x L x T: 1200 x 500 x 420 mm Berat: 80 kg Kondisi baik

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Iodpfx Aourw Uyja Deaw equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: baru, Tahun pembuatan: 2025, – Kapasitas M5–M36 Isdpfx Aaextq She Dsaw – Hidrolik – Area kerja 2050 mm – Kepala dapat diputar – Sistem quick-change – Kecepatan ulir dapat diatur tanpa tingkat – Kecepatan balik dapat diatur tanpa tingkat – Indikator kecepatan putar digital – Termasuk 14 insert tap ulir – Meja kerja berat dengan alur-T – Sistem pelumasan manual atau otomatis – Tombol darurat (emergency stop) – Dokumentasi – 400V

Kondisi: bekas, Hagen & Goebel Internal Thread Cutting Machine Type HG 124 Machine No. 4112 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M15 Thread cutting capacity in brass: M3 to M17.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volt, 50 Hz - 6 speed steps via belt change (3 steps via belt + 2 motor speeds) - Thread pitch by change cartridge - 2 change cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion by hand crank on the round column - Spindle mount with taper Ø 14.8 to 16 mm - Keyed drill chuck Ø 1 to 13 mm Iajdshgnd Aspfx Aa Djw Space required (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg In good condition.

Kondisi: baik (bekas), Made in Germany Minimum economically grindable bore: 6 mm Maximum grindable bore: 50 mm Maximum grinding length: 80 mm Iasdpfx Aajda A Eis Dew Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Swivel angle of workpiece spindle box (to one side): 10 degrees Maximum table speed, hydraulically steplessly adjustable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2000 kg

Kondisi: bekas, Tahun pembuatan: 1989, de-001 Iajdpfx Aexzuzcsa Dew

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8151, diameter meja putar: 800 mm, tinggi penggerindaan: 750 mm, berat benda kerja (maks.): 800 kg, tinggi total: 4.100 mm, lebar total: 26.650 mm, panjang total: 44.000 mm, panjang umpan sumbu Y: 750 mm, panjang umpan sumbu Z: 550 mm, berat keseluruhan: 13.000 kg, diameter roda gerinda: 400 mm, diameter cakram: 400 mm, kecepatan spindle penggilingan: 1.460 rpm, diameter penggilingan: 800 mm, lebar kabinet kontrol: 650 mm, jenis arus masuk: Arus searah (DC), tinggi kabinet kontrol: 1.900 mm, panjang kabinet kontrol: 1.800 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 1.460 rpm, beban meja: 900 kg, diameter benda kerja (maks.): 850 mm, lebar roda gerinda: 60 mm, lebar meja: 1.240 mm, daya: 35 kW (47,59 hp), gerak cepat sumbu X: 2 m/menit, pergeseran cepat sumbu Y: 100 m/menit, pergerakan cepat sumbu Z: 2 m/menit, kebutuhan tinggi: 4.100 mm, persyaratan ruang panjang: 5.100 mm, lebar yang dibutuhkan: 2.655 mm, Good day, For sale is a well-maintained and fully functional Sielemann cylindrical grinding machine suitable for surface grinding, internal grinding, and external grinding applications. The machine features a swiveling column with three different grinding heads, each designed for the respective application area. A complete set of machine documentation is available and can be presented during inspection. The Sielemann offered here has been regularly serviced and maintained. The following components have recently been renewed: - 3 new counterbalance cylinders - 1 new hydraulic power unit (complete) - New way covers - Rotary table assembly overhauled Iedpfx Aasrntirs Doaw Technical Data: Machine length: 4,400 mm Machine width: 2,655 mm Machine height: 4,100 mm Machine weight: 13,000 kg Control cabinet width: 650 mm Control cabinet height: 1,900 mm Control cabinet length: 1,800 mm Grinding table diameter: 800 mm Grinding table load capacity: 800 kg Grinding table drive power: 0.21 – 14.5 kW Grinding table speed: 100 rpm (both directions) Grinding table workpiece clamping: magnetic chuck incl. T-slots Z-axis travel (grinding table): 550 mm Maximum grinding height (Y): 750 mm Lubrication pump machine bed: 0.18 kW Lubrication pump column: 0.1 kW Leakage oil pump: 0.065 kW Hydraulic pump: 1.5 kW 1) External Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,450 rpm Grinding wheel: 400 x 50 mm Tapered grinding spindle mount: D = 65 mm Taper pitch: 1:5 Feed rate (Y): 100 mm/min 2) Internal Cylindrical Grinding Head Spindle drive power: 5.5 kW Grinding wheel: variable Feed rate (Y): 100 mm/min 3) Surface/Cylindrical Grinding Head Spindle drive power: 11 kW Spindle speed: 1,800 rpm Grinding wheel: 400 x 50 mm Tapered grinding spindle mount: D = 65 mm Taper pitch: 1:5 Feed rate (Y): 100 mm/min Inspections can be arranged at short notice by appointment! Best regards, R. Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Kondisi: baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 5890, 25118 Technical Specifications: - Tapping capacity: approx. M3 - M8 - Working range (pivot radius): approx. 1800 mm Iasdpfxswmnhps Aa Dew - Multi-position head - Spindle speeds: 8 - 700 rpm - Quick-change tool holder, size 1, Ø19 mm - Pneumatic connection: 6 - 8 bar - Table pedestal height: 900 mm - Required floor space: approx. W 1000 x H 2000 x D 1000 mm - Weight: approx. 100 kg

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: 6284, Offer 24033 Technical Specifications: Iajdpfort Unwox Aa Djw - Thread tapping capacity: M 3 to M 24 - Working range (swivel radius): 1,800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth setting - Torque: 140 Nm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface: 1,200 x 990 mm - Table height: 830 mm - Required space: approx. W 1,250 x H 2,000 x D 1,000 mm - Weight: approx. 300 kg

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024JT05VL, diameter ulir metrik (min.): 3 mm, diameter ulir metrik (maks.): 16 mm, jangkauan kerja: 2.000 mm, berat keseluruhan: 19 kg, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 500 rpm, kedalaman tenggorokan: 2.000 mm, tinggi meja: 870 mm, lebar meja: 800 mm, panjang meja: 600 mm, Perlengkapan: dokumentasi / manual, VOLUMEC JoyTap 3150 - Tapping Unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for JoyTap – Assisted control for tapping operations 1. NEW ALUMINIUM FRAME with EXCLUSIVE Volumec profile designed for greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for smoother movement and increased power 3. NEW-GENERATION (G2) BRUSHLESS MOTOR offering unmatched performance and reliability 4. INTEGRATED CABLING that does not restrict movement 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and tapping tasks, updated with new features and programmable torque (Nm) 6. MULTI-DIRECTIONAL HEAD with automatic locking 0-90° for workpiece alignment 7. QUICK-CHANGE COUPLING SPINDLE TAPPING: Isdovr U Unepfx Aa Djaw • AUTOMATIC TAPPING (adjustment of pitch – depth – speed – torque Nm for tool protection) • TAPPING with PROGRAMMABLE chip breaking • MANUAL TAPPING (preset speed – torque (Nm) for tool protection) • THREAD COUNTING capability • PROGRAM MEMORY with password protection • Easy PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring operations • CONSTANT SPEED AND TORQUE during tapping thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made from machined steel, T-slots in the inner compartment

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Iedpfjqzkdmjx Aa Djaw

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Profile Thread and Gear Hobbing Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over saddle: 250mm Maximum workpiece diameter over bed slideway: 500mm Spindle bore: 102mm Tailstock quill adjustment: 100mm Main motor: 4.0 kW Cross axis (x) feed motor: 4.3 kW Longitudinal axis (z) feed motor: 3.8 kW Electrical Equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for predefined machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Isdpfxow Hquxe Aa Dsaw Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard Accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle internal taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest tooth count for gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW For hobbing axis-parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4 • Heavy-duty thread milling attachment ApGS For hobbing axis-parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Milling spindle internal taper: Morse 4

Kondisi: baik (bekas), Nomor gudang: 2852 Produsen: Polandia Tahun pembuatan: 1974 Nomor mesin: 33891 Tipe / Model: TUD 50 Jarak antara senter: 2.000 mm Bore spindle: 56 mm Tinggi senter: 250 mm Iasdpox Uykxofx Aa Dow Diameter putar di atas ranjang: 500 mm di atas eretan: 300 mm Rentang putaran: 18 hingga 1.800 rpm Feed memanjang: 0,08 hingga 3,26 mm/putaran melintang: 0,04 hingga 1,63 mm/putaran Daya terpasang: 7,5 kW Aksesori/perlengkapan: Chuck rahang tiga Kondisi: baik Berat: sekitar 3,5 ton Dimensi: 3.500 x 1.150 x 1.600 mm

Tahun pembuatan: 1971, Kondisi: siap digunakan (bekas), 1 Iasdpjxyk S Uofx Aa Djw