Beli Elpu N 120 Mit Behälter bekas (62.822)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Tilting spindle moulder MAKA SF 4510/ GRIGGIO with power feed Dcjdpjy Rh Nzofx Ac Tsi Very good condition, the machine comes from a small village carpentry workshop with 3 employees Everything works perfectly All bearings and guides are in excellent condition, the machine runs very smoothly Comes with a milling fence, one fence jaw is depth-adjustable and features a fine adjustment with scale, allowing tasks such as jointing, e.g., when making a glue joint profile The entire milling fence can also be adjusted with a set screw, enabling very precise settings With spindle lock via clamping lever Optimal chip extraction with two 120mm extraction ports—one on the milling fence and one on the machine body Equipped with a 30mm spindle, infinitely tiltable from -5° to 45°, tilt adjustment by handwheel with accurate degree scale With forward and reverse operation We deliver the machine personally throughout Germany for €220.00 and provide a demonstration upon delivery—so there is no risk when you purchase; delivery to other EU countries is also possible Large table opening, adjustable in size via several rings (thus, you can use very large diameter cutters and also work safely with small cutters) Spindle speeds: 3200, 4200, 6000, and 8000 rpm Spindle height adjustment also via a handwheel with lock screw Interchangeable spindle (a 40mm spindle can also be used) Optimal power transmission via V-belt drive Table size: 1070mm wide x 940mm deep Ready for immediate use 380V, 5500W, with motor protection switch against overload Year of manufacture: 1999 Weight: approx. 700kg Machine has CE certification Comes with manual, motor brake, and emergency stop switch, complies with all woodworking trade association (Holz-BG) requirements Additionally, you'll receive a 3-roller power feed unit from HAFFNER with 8 speeds Optimal, simple, fast, and safe operation

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 930 Ah, tegangan baterai: 80 V, tinggi total: 784 mm, panjang total: 1.028 mm, lebar total: 1.000 mm, Tested forklift battery for your truck - 80V 6PZS 930AH - DIN A + 1-year warranty + Incl. Aquamatik water filling system + Incl. terminal disconnector & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models and others: Djdpfxey Rnpzo Ac Tjci Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Common battery sizes available — please enquire. Transport can be arranged.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm Dcedpfx Acjh R Taqj Tji - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm Dodomhhy Nopfx Ac Toci - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR UNIFORM CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - Centering unit RCC500 infeed - Vertical drive and guide belts Dodpfoykugxex Ac Teci - Carton size adjustment manual - Sealing units for bottom and top - Standard version T22 / T23 - Tape width from 50 to 50 mm, depending on the unit used - Adjustable tension - Max. tape roll diameter 360 mm - Tape roll core diameter 76 mm - Power supply 400 V, 3-phase, N, PE – 50/60 Hz - Power consumption 0.25 kW - Protection rating IP54 - Operating temperature +5°C to max. +35°C - Conveyor speed 22 m/min - Average output 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm: 2,470 x 990 x 1,782 H - CE-compliant safety guard: Side sheet metal covers with access door, supplemented with infeed doors (L 850 mm), upper and lower covers. Image may show optional equipment subject to surcharge.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Dsdjykud Rspfx Ac Tjci

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Djdpfx Aoykuhcsc Tjci Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) Dedeyktv Sjpfx Ac Teci - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S Dcodpfxsyktrtj Ac Tsi with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Dcedpoykub Aofx Ac Toi Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Kondisi: baik (bekas), 2550 x 880 mm (6 buah) 2550 x 1090 mm (3 buah) 1300 x 100 mm digerakkan + 2 buah tanpa penggerak (2 buah) 1300 x 200 mm digerakkan + 1 buah tanpa penggerak (1 buah) Diameter rol: 60 mm Dodpfexcufkjx Ac Teci

Kondisi: baru, The SAPI Mammut sandblasting units with QUICK STOP™ device are powerful industrial sandblasting machines used across various sectors such as automotive, construction, and manufacturing. These units are designed for rapid and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature developed to prevent accidents and equipment damage. It operates by immediately stopping the blasting process as soon as the operator releases the control handle. The abrasive flow is instantly interrupted. This safety system can prevent workplace accidents and protects the machine from stress-related damage. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-grade components, ensuring reliable performance even under the toughest conditions. All our machines are fully CE and TÜV certified. Flexibility and Versatility The machine is available in various tank sizes to accommodate different sandblasting requirements. It can be used with a wide range of abrasive materials, from standard sand to specialized plastic or metallic blasting media. Our Mammut with QUICK STOP™ is suitable for numerous applications, including surface preparation, cleaning, and the removal of rust, paint, and coatings. Djdpfx Asupyw Eec Toci Precision and User-Friendliness Our Mammut with QUICK STOP™ provides precise control and adjustment of blasting pressure even during operation, enabling consistent results with high accuracy. Additionally, our units feature easily accessible inspection and maintenance ports. Safety The QUICK STOP™ system, equipped with a dead man's switch, ensures maximum safety during sandblasting. QUICK STOP™ also prevents the build-up of moisture inside the machine by maintaining constant pressure, even when blasting is paused. This is not the case with conventional on/off valve technology. All Mammut sandblasting machines with QUICK STOP™ come fully equipped as standard. Our scope of supply typically includes: sandblasting hose, nozzle, pressure regulator, water separator, abrasive metering valve, and basic personal protective equipment.

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 3.000 h, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area 3000x1500mm. High-pressure pump Ecotron 40.37, year 2013 Water softening system, year 2018 --> as new condition Abrasive backflushing system, year 2013 Column-mounted slewing crane Abus 2t, year 2018 --> as new condition Vacuum lifting system Devo-Tech, load capacity 1800kg --> as new condition Various accessories. Several sandbags The system was acquired at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump had been completely overhauled by the supplier. Unfortunately, the cutting system was rarely used in our company. It was run only a few hours per year. Not in operation since around July 2025. The high-pressure pump is defective; it is not leak-proof and is losing water. Both high-pressure cylinders were replaced in recent years. The last service was in 2025. According to the service engineer, repair of the pump would cost approx. CHF 5,000 to 6,000. Dodjyq Rdyepfx Ac Tsci The crane and the vacuum system can also be purchased separately. Please send an offer with your price expectation. New price in 2019 for crane and vacuum equipment was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected but has been drained and cleaned. Please send registrations or offers by email, not by phone.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 180 l, tinggi total: 1.160 mm, berat keseluruhan: 37 kg, tekanan kerja: 11 batang, tekanan: 11 batang, Compressed air tank battery consisting of: 2 x 90-liter upright compressed air tanks, galvanized, 11 bar MADE in GERMANY (BWB) Including fittings kit for self-assembly: 2 x 11 bar safety valves with elbow; 2 x 16 bar pressure gauges, sealing plugs, 1 x ball valve shut-off for tank, 1 x ball valve each for air inlet & outlet, 2 x ball valves for condensate outlet with extension, sealing plugs, sealing tape, connecting hose. With test certificate (tank and safety valves) Year of manufacture: 2023 High-quality compressed air tank Made in Germany (BWB Behälter Werk). Hot-dip galvanized inside and outside according to DIN EN ISO 1461. Technical specifications per tank: - Capacity: 90 liters - Max. overpressure: 11 bar - Diameter: 350 mm - Tank height: 1160 mm - Weight (without fittings): 37 kg - Compressed air inlet connection: G 1/2" - Compressed air outlet connection: G 1/2" - Safety valve connection: G 3/8" - Condensate drain connection: G 2" TÜV approval exempt with test certificate Dcedpfjq Ul Txjx Ac Tsi The stated price is a fixed price incl. VAT. The buyer receives an invoice with VAT shown. Shipping by forwarding agent is possible at extra cost. We always have a wide selection of new and used compressors in stock!

Kondisi: baru, Tahun pembuatan: 2025, Delivery every Monday, Tuesday – RELIABLE! 3-fold segmented bending machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding bench with complete foot control - Piano key segments in the upper, lower, and bending beams provide a wide range of bending possibilities Dodpfxec I T Txj Ac Toci - Upper, lower, and bending beams segmented (piano key design) - Segments are adjustable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Bending beam is effortless to operate thanks to a heavy-duty pressure spring/shock absorber - Heavy and robust construction for decades of operation - Convenient opening and closing of the upper beam Technical Data: - Max. working width: 1400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams equipped with segment jaws (full segmentation) - End stop for pre-set bending angles - Degree scale - Free clearance: 100 mm Transport rollers included. Nationwide shipping within Germany: 180 euros SCRIBING TEMPLATE FREE OF CHARGE! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT. We look forward to your inquiry!

Kondisi: baru, Tahun pembuatan: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears leverage the precision of CNC technology. This range is designed for industrial applications, ensuring every product stands out with outstanding durability and ruggedness, regardless of working conditions. The specifications comply with strict technical standards and stringent CE regulations, with adherence to EU requirements providing the best proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, high-performance, heavy-duty, and exceptionally robust segmented folding bench – this is no standard folding machine, but one that’s significantly stronger and more durable. A segmented folding bench is distinguished by full segmentation along the entire 1.40 m working length. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into individual segments. Bending angle adjustable from 0 to 155 degrees. Clamping is foot-operated, keeping both hands free for optimal sheet metal positioning; opening and closing also by foot control. The bending beam is fitted with two gas pressure dampers for exceptionally smooth and easy operation. At the rear of the machine there is a practical segmented tool box. Technical data: - Max. working width: 1,400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - Three beams equipped with segment jaws (fully segmented) - Adjustable stop for preset bending angles - Degree scale Price: €5,700 Swivel castors included Delivery time: weekly Cash payment on delivery Delivery cost: €180 We look forward to your inquiry! Dedpoc Swhyjfx Ac Tsci

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Mixing grinder / meat mincer Kolbe MWE-32 In good used and fully operational condition. Belt and motor new. The unit operates on 400 volts, entirely stainless steel, mixing paddle, 98 cm Enterprise system, workshop tested, ready for immediate use. Loading FD 200, year of manufacture 2009. Dsdpfx Aewcgr Eoc Teci The machine itself is from 2007. Further information available on request. Payment in cash or advance bank transfer. Sale to trade professionals only. No warranty or guarantee.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 2.442 h, kapasitas angkut: 2.500 kg, tinggi angkat: 6.000 mm, jenis bahan bakar: diesel, tinggi konstruksi: 1.900 mm, daya: 52 kW (70,70 hp), berat kosong: 4.800 kg, panjang total: 4.000 mm, jenis penggerak: Diesel, lebar konstruksi: 1.850 mm, Teleskopik dengan tiang tetap Kondisi: Siap digunakan dan berfungsi penuh Kondisi Teknis: baik Jenis ban depan: Ban padat Kondisi ban depan: 20 - 40% Jenis ban belakang: Ban padat Kondisi ban belakang: 20 - 40% Deskripsi: Pemuat teleskopik DIECI Apollo 190 -- Jangkauan 6m -- Kapasitas angkat 2,5 ton -- Tahun pembuatan 2006 -- 2442 jam operasi -- pengubah cepat mekanis -- mesin diesel Yanmar 4 silinder 52kW -- kemudi 4 roda -- penggerak 4 roda -- 3 mode kemudi -- 1 gigi dengan penggerak hidrostatik -- kabin -- pemanas -- sistem pencahayaan -- hidrolik tambahan hingga penyangga garpu, katup ke-3 -- dilengkapi dengan garpu palet bekas -- ban depan 30% -- ban belakang 30% -- kontrol joystick -- ember bekas (lebar: 1,90m) tersedia dengan HARGA TAMBAHAN - Harga 1000,-- EURO -- Tinggi bangunan: 1,92m -- Lebar: 1,85m -- Panjang 4m -- Berat: sekitar 5 ton -- kondisi baik -- starter baru dipasang Katup ke-3, pemanas, kabin penuh Dedszkc I Nspfx Ac Teci Kabin -- Pemanas -- Sistem pencahayaan

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 3.342 h, kapasitas angkut: 2.000 kg, tinggi angkat: 6.000 mm, jenis bahan bakar: diesel, tipe tiang: telescopik, tinggi konstruksi: 1.920 mm, daya: 43 kW (58,46 hp), berat kosong: 5.000 kg, jenis penggerak: Diesel, lebar konstruksi: 1.800 mm, Teleskopik, model tetap Jenis tiang: Teleskopik Kondisi: Siap digunakan dan berfungsi penuh Kondisi Teknis: Baik Ban depan, jenis: Ban padat Kondisi ban depan: 0 - 20% Ban belakang, jenis: Ban padat Kondisi ban belakang: 0 - 20% Deskripsi: Manitou MT620 -- Jangkauan 6m -- Kapasitas angkat 2 ton -- Tahun pembuatan 2009 -- 3342 jam kerja -- mekanisme pengganti cepat mekanis -- Mesin diesel Perkins 3 silinder, 43kW -- Kemudi 4 roda -- Penggerak 4 roda -- 3 mode kemudi -- Kabin -- Pemanas -- Sistem pencahayaan -- Sistem hidrolik tambahan hingga pengait garpu, katup ke-3 -- Dilengkapi dengan garpu palet bekas -- Ban depan 20% -- Ban belakang 20% -- Dengan bak baru dengan biaya tambahan -- Tinggi: 1,92m -- Lebar: 1,80m -- Berat: sekitar 5 ton -- Kondisi baik -- Semuanya mekanis -- Sangat mudah bermanuver Dsdpfxozkc I Ao Ac Tsci Katup ke-3, pemanas, Kabin -- Pemanas -- Sistem pencahayaan

Kondisi: baru, berat keseluruhan: 20.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 8.200 mm, suspensi: udara, ukuran ban: 235/75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235/75 R 17,5, ukuran ban belakang: 235/75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat kosong: 3.050 kg, berat muatan maksimum: 9.950 kg, berat keseluruhan: 13.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.280 mm, lebar ruang muat: 2.480 mm, suspensi: baja, warna: lain, tipe perpindahan gigi: lain, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: sangat baik (bekas), berat kosong: 2.532 kg, berat muatan maksimum: 8.368 kg, berat keseluruhan: 11.900 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.200 mm, lebar ruang muat: 2.450 mm, Tahun pembuatan: 2020, Trailer gandeng datar Müller-Mitteltal ETUE-TA-ER 11,9 Pendaftaran pertama: 12/2020 11.900 KG berat total 8.368 KG berat muatan 2.532 KG berat kosong - Panjang ruang muat 6,2 meter - Lebar bagian dalam 2,45 meter - Termasuk ramp aluminium dengan ruang penyimpanan ramp - Ramp 40/330 cm - Kaki penyangga di bagian belakang - Tongkat penarik yang dapat disesuaikan ketinggiannya - TERLAPIS SENG! - Kondisi asli yang bagus dan siap digunakan! - Termasuk dokumen kendaraan (D-Papiere) Harga jual: 14.900,-- (netto) Dcjdjzi Aztepfx Ac Tei Pengiriman dengan biaya terjangkau juga tersedia!

Kondisi: baru, berat kosong: 7.460 kg, berat muatan maksimum: 22.540 kg, berat keseluruhan: 30.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 9.000 mm, lebar ruang muat: 2.550 mm, suspensi: baja, ukuran ban: 235/75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235/75 R 17,5, ukuran ban belakang: 235/75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: bekas, berat muatan maksimum: 1.090 kg, berat keseluruhan: 1.300 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 01/2025, panjang ruang muatan: 2.300 mm, lebar ruang muat: 1.510 mm, tinggi ruang muatan: 1.560 mm, lebar total: 1.580 mm, tinggi total: 300 mm,

Kondisi: baru, Pompa sentrifugal Lowara SV805F22T/A, nomor seri: 107391051, dengan motor SM90RB14/322, nomor seri: 13282R00G. Kondisi: baru, berfungsi 100%. Lingkup pengiriman sesuai dengan foto. Dsdpfxjzkdatj Ac Tsci