Beli Engel Victory 2460/260 Tech Ecodrive bekas (7.586)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.078 kN, diameter sekrup: 45 mm, berat injeksi: 318 g, panjang pelat: 730 mm, lebar pelat: 600 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Berat injeksi: 318 g Diameter ulir: 45 mm Bsdpfsy Ev Unox Am Iolg Gaya penutupan: 110 t DETAIL MESIN Ukuran pelat: 730 mm x 600 mm PERLENGKAPAN Pelat penjepit yang diperbesar Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan mendapat potongan biaya pembongkaran dan pemuatan masing-masing.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.716 kN, diameter sekrup: 55 mm, berat injeksi: 459 g, panjang pelat: 820 mm, lebar pelat: 750 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Gaya penutupan: 175 ton Diameter ulir: 55 mm Berat injeksi: 459 g Volume langkah: 510 cm3 DETAIL MESIN Kontrol: CC100 Pelat penjepit yang diperbesar: 820 mm x 750 mm Catatan: Saat membeli beberapa barang dari lokasi yang sama (lihat penawaran di bawah), biaya pembongkaran dan pemuatan yang lebih murah akan diberikan. Bljdpfxjy Ev S Ts Am Ijg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.716 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, panjang pelat: 820 mm, lebar pelat: 750 mm, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Bledpfxsy Ev R Aj Am Ijg Gaya penutupan: 175 t Diameter ulir: 45 mm Volume injeksi: 318 cm³ Tinggi pemasangan alat min.: 250 mm DETAIL MESIN Pelat penjepit: 820 mm x 750 mm PERLENGKAPAN Pelat penjepit yang diperbesar Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan mendapatkan biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 23.905 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 2.221 batang, langkah pembukaan: 335 mm, panjang total: 2.420 mm, lebar total: 1.700 mm, tinggi total: 3.100 mm, berat keseluruhan: 6.700 kg, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding ENGEL INSERT 200V/60 yang terawat dengan hanya 23.905 jam operasi. Mesin ini hanya digunakan untuk pengujian sampel. Bledpey Iwlajfx Am Isg Inspeksi dengan arus listrik dapat dilakukan kapan saja! Data teknis sesuai gambar! Mesin tersedia segera!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 57.077 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 179742, gaya penjepit: 700 kN, diameter sekrup: 30 mm, volume langkah: 99 cm³, tekanan injeksi: 1.451 batang, berat injeksi: 89 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machinery dealer. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Vertical Injection Moulding Machine with Rotary Table Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Bjdjy Ir Nyjpfx Am Iolg Operating hours: 57,077 h Control system: CC 200 Languages: German, English Fully operational Condition: very well maintained Machine from German first ownership xxxxx without the peripheral devices shown xxxxx Extras - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable depending on station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for pressure-dependent hold pressure switching, including the respective graphic pages - 3 potential-free monitoring inputs for supervising peripheral devices such as temperature control units - Euromap63 interface for connecting to machine data collection systems - Hot runner control/valve gate control Injection Unit Screw diameter: 30 mm Shot weight: 89 g/PS Injection pressure: 1451 bar / boosted: 2205 Shot volume: 99 cm³ Clamping Unit Clamping force: 70 t / 700 kN Rotary table diameter: 1200 mm Opening stroke: 305 mm Ejector stroke/force: 105 mm / 20.1 kN Clamping unit fully electric Warranty Warranty up to first commissioning Loading/Shipping Free loading onto buyer's truck or free delivery to destination upon reimbursement of freight charges Available from our warehouse in Hannover, Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Engel e-Motion 740/280 T WP with TecnoMatic Robot / All-Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1,900 bar Dosage volume: 393 ccm Clamping Unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Platen dimensions: 1,100x1,100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - Touchscreen Bledpoy Dqr Sjfx Am Iog Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 4 Hot runner control x 64 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor with inverter drive - energy-saving Central lubrication Parallel movements Automatic mold height adjustment TecnoMatic Medium Robot Year of manufacture: 2020 6-axis robot: all axes driven by servo motors (electric): X, Y-telescopic, Z, A, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 17,200 kg Length/Width/Height: 7.37x2.10x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E robot / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1,834 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 275 t Tie bar spacing: 0x0 mm Platen size: 1,050 x 900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional Equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less design Hydraulic core pull x 3 Control with hot runner zones x 16 Injection unit hardened – bimetallic Machine has been serviced regularly by authorized Engel service Bjdpfey Dqr Esx Am Islg Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10 x 2.15 x 2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Engel Insert 80V/80V/100 2F / 2-C Tie-barless machine, vertical / In perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t Tie-bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-barless machine with two vertical injection units, with rotary table Blsdjy Dqlropfx Am Isg Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorized Engel service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Engel e-max 440/180 / Electric Injection Molding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Dosage volume: 220 cc Clamping Unit: Clamping force: 180 t Tie bar spacing: 520x520 mm Platen size: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touchscreen Additional Equipment: Machine in very good technical condition, previously operated in a clean production environment Electric machine: high-speed, energy-saving, and extremely quiet Euromap 67 Robotics interface Air valve x 3 Injection unit hardened - bimetallic Parallel movements Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure control Blodpoy Dqnasfx Am Ijg Original mold crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87x1.42x2.00 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.672 h, gaya penjepit: 4.000 kN, diameter sekrup: 80 mm, tinggi total: 2.360 mm, berat keseluruhan: 11.000 kg, panjang produk (maks.): 7.420 mm, Engel DUO 3550/400 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penutup sebesar 4.000 kN, diameter sekrup 80 mm, dan volume injeksi maksimum 1.960 cm³. Dimensi mesin adalah 7.420 × 2.360 × 2.360 mm, dengan berat 11.000 kg. Dilengkapi dengan antarmuka robot Euromap 67. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Bljdpfox Nr Rysx Am Isg

Kondisi: baru, O222 Bodpfx Asx S Il Eom Islg

Kondisi: sangat baik (bekas), CATALOG NO. 7081 Blodpfx Amex Swwds Ijg TECHNICAL DATA - JOINTER: - shaft width: 260 mm - table length: 1190 mm - cast iron fence adjustable for angle - adjustable tables THICKNESS PLANER: - max working height: 110 mm - thicknessing shaft guard from above: - anti-kickback fingers - feed roller, serrated - cutterblock - outfeed roller, smooth, feed - extraction port diameter: 85 mm CIRCULAR SAW: - max blade diameter: 160 mm - max cutting height: 25 mm - blade bore diameter: 30 mm - blade adjustable up/down - blade guard - max width of cut with fence: 160 mm - table size: 710x420 mm SPINDLE MOULDER: - spindle diameter: 30 mm - spindle adjustable up/down - spindle height: 110 mm - max tool diameter: 190 mm - fence - motor approx. 2.2 kW - dimensions (L/W/H): 1200x900x800 mm - weight: 325 kg ADVANTAGES – compact, takes up little space – very good condition – used multi-function machine Net price: 7,900 PLN Net price: 1,880 EUR at 4.2 EUR/PLN (Prices may vary with currency fluctuations)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 70000121, jumlah kartrid tinta: 6, saluran warna: 6, jumlah kepala cetak: 8, resolusi (maks.): 360 DPI (titik per inci), lebar kertas (min.): 400 mm, lebar kertas (maks.): 2.800 mm, tinggi kertas (min.): 400 mm, tinggi kertas (maks.): 3.700 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, prosesor gambar raster, de_DIP-TECH GlassJet PRO 16PH – Industrieller Digitaldrucker für Glas Professionelle Lösung für den digitalen Keramiktintendruck, konzipiert für mittelgroße bis große Glasverarbeitungsbetriebe. Digitaler Keramischer In-Glas-Druck: Technologie, bei der der Druck ebenso beständig und langlebig ist wie das Glas selbst. Designflexibilität: Ermöglicht den Druck von fotorealistischen Bildern, Vektorgrafiken, Texturen und Imitationen (z. B. Sandstrahlglas-Effekt). Robuste Bauweise: Das Rollen-Fördersystem (Flachbett-Gantry) gewährleistet maximale Präzision auch bei schweren Glasscheiben. Allgemeine Daten: Hersteller: Dip-Tech (Ferro Group) Modell/Typ: GlassJet PRO 16PH Seriennummer: 70000121 Baujahr: 2009 Anzahl der Druckköpfe: 8 installiert (erweiterbar auf bis zu 16) Tintentyp: Digitale Keramiktinte (nach dem Drucken muss getempert/gebrannt werden) Steuersprache: Englisch Max. Glasgröße: 2.800 x 3.700 mm Min. Glasgröße: 400 x 400 mm Glasstärke: 2–19 mm Leistung & System: Druckauflösung: Bis zu 360 dpi Anzahl der Farbkanäle: 6 Kanäle (BGWORK: Blau, Grün, Weiß, Orange, Rot, Schwarz) Steuersoftware: GlassJet Operating System / Durasst RIP Druckkopftyp: Spectra Nova Transportsystem: Automatischer Rollenförderer Zustand: Die Maschine befindet sich in einem sehr guten optischen und technischen Zustand und wurde regelmäßig über das Steuerungssystem gewartet. Sie wird mit sämtlicher Dokumentation und technischen Zeichnungen verkauft. Ein Satz Ersatzteile ist auf Anfrage ebenfalls verfügbar. Für weitere Informationen rufen Sie bitte an: +387 63 335 445 Bljdjy Ia E Aspfx Am Ijg

Kondisi: baik (bekas), Tahun pembuatan: 2014, Malaikat Viper 20 Blodpfowrzg Ajx Am Ieg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, gaya penjepit: 6.500 kN, diameter sekrup: 60 mm, berat keseluruhan: 6.500 kg, produsen pengendali: ENGEL, This electric injection moulding machine Engel duo 2400/650 was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection volume of 890 cm³. The clamping force reaches up to 6500 kN, with a maximum mould weight of 11,000 kg. Take advantage of this opportunity to purchase the Engel duo 2400/650 electric injection moulding machine. Contact us for further information on this machine. Additional Equipment • Oil tank capacity – injection unit: 500 l • Maximum cooling capacity (at 32°C water inlet): 29.40 kWcool • Water consumption (32°C): 4.80 m³/h Machine Advantages Quality Features • The machine is equipped with electric water manifolds (4 E-Flomos, each with 8 circuits). • The injection units are fitted with accumulators, enabling a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Features • Maximum injection capacity: 890 cm³ • Screw torque: 2000 Nm // maximum screw speed at reduced torque: 275 min⁻¹ • Reduced torque at maximum screw speed: 1600 Nm • Recovery rate (3-zone screw): 51 g/s // Recovery rate (barrier screw): 67.1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • L/D ratio: 24.0 • Heating zones including nozzle: 8 // Heating capacity: 27.5 kWel • Opening force with cushion: 510 kN • Maximum platen distance: 1750 mm Additional Information Dimensions & Weight • Width of ejection chute: 1100 mm • Weight of clamping unit: 20,000 kg • Maximum mould weight (movable platen): 7,330 kg • Maximum mould weight (fixed platen): 7,330 kg • Maximum total mould weight: 11,000 kg Cycle Data (Euromap 6) • Stroke: 700 mm • Dry cycle time: 2.9 s Control System: Monocompute CC300 Key Features • 21.5" Full HD touchscreen • USB interface / Ethernet port • E-move control element • 3 key cards for user login • Graphic icons for cycle control • Display languages: German, English • Acoustic error signal / signal light for fault indication Programs & Monitoring • Power Control: optimises motor performance during metering • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight and viscosity • IQ Weight Control: automatic adjustment of injection parameters in case of fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Platens • Reinforced platens (FAP & BAP each +50 mm) • Reduced min./max. mould height and platen spacing (-100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical cap minimised • BAP: without ejector opening • Additional threads as per EUROMAP VOL1 • Centring grooves as per drawing • Platen ejector – Variant A (customised to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moveable platen Blodey D Npcopfx Am Ieg • 2-fold on fixed platen • 2-fold on moveable platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for core pull intermediate position Mould Heating & Cooling • Mould heating: 16 circuits, max. 40 kW heating capacity (Euromap 14)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2026,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Kontrol CC100 A03 dari mesin cetak injeksi ENGEL untuk dijual. Blodpey H Hbhjfx Am Ieg

Kondisi: perlu perbaikan (bekas), Mesin cetak injeksi, Engel ES 330/85, mesin bekas Seperti yang terlihat pada gambar, kondisi kerjanya tidak diketahui. Dimensi keseluruhan: 3100 x 1950 x 2600 mm Berat: 5500 kg Blodpsukn S Hefx Am Ijg Produsen: Engel Tipe: ES 330/85 Tahun pembuatan: 1997 Data kelistrikan: 380V, 60 A Kartu pengendali: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 33.107 h, Fungsionalitas: berfungsi sepenuhnya, Top machine from cleanroom production (pharmaceutical sector) - With rotary table 820 mm - With GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - Only 33,107 operating hours - Safety housing/safety cage - Horizontal conveyor belt - Minimal paint damage / nearly as-new appearance - Fully operational The machine can be inspected under power by arrangement. Technical data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Bodpfsub Umqjx Am Ielg Functionality: Fully operational Condition: Excellent Special features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72/35 g Injection pressure: 2391/2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: Tie-barless Ejector stroke / force: 61 kN / 100 mm Clamping unit: Hydraulic Motor output: to follow Heating capacity: to follow Total connected load: to follow The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras 2-component/2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety housing / safety cage CC 200 control German/English language GEKU Robot Details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis (vertical): 1400 mm Z-axis (horizontal): 2500 mm A-rotary axis: SWM 45 C-axis: Servo Gripper: SWS16 B-axis: Not present Warranty Warranty until first commissioning Loading/Shipping Free loaded onto buyer's truck or free delivery within Germany upon reimbursement of freight costs From our warehouse in Hanover/Germany Financing – on request – lease-purchase option Price on request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 58.000 h, Fungsionalitas: berfungsi sepenuhnya, superbly maintained injection moulding machine from cleanroom (pharmaceutical production) - fully operational with functional guarantee - equipped with GEKU SR 500 ST linear robot - excellent visual condition Technical Data Manufacturer: Engel Model: e-max 200/100 Serial number: 170609 Year of manufacture: 2008 Operating hours: approx. 58,774 h Dimensions (L/W/H): 4.0 x 1.3 x 1.9 m Weight: 3,900 kg Functionality: fully operational Condition: excellent cleanroom quality Special Features Control system: CC200 Screw diameter: 25 mm Shot weight: 55 g/PS Injection pressure: 2,400 bar Shot volume: 59 cm³ Clamping force: 1,000 kN / 100 t Tie bar spacing: 460 x 410 mm Mounting plate dimensions: 650 x 600 mm Mould installation height: 150-450 mm Max. platen distance: 800 mm Opening stroke: 350 mm Ejector stroke / force: 100 mm / 25 kN Clamping unit: electric Connected load: 45 kW Rated current: 69 A The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras Blsdoubamvopfx Am Iog GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1,400 mm vertical Z-axis: 2,500 mm horizontal A-swivel axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not present Warranty Warranty up to first commissioning Loading/Shipping FCA – Free loaded onto buyer's truck or free domicile against freight reimbursement from our warehouse in Hanover, Germany Financing On request – Hire-purchase option Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 43.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194413, gaya penjepit: 2.200 kN, diameter sekrup: 55 mm, volume langkah: 475 cm³, tekanan injeksi: 1.578 batang, berat injeksi: 440 g, tinggi cetakan (min.): 300 mm, lintasan ejektor: 180 mm, langkah pembukaan: 750 mm, berat keseluruhan: 12.740 kg, kapasitas pemanasan: 13,4 kW (18,22 hp), Here, as a dealer specializing in injection moulding machines, we are offering the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Notice and Used Machine Advantage As of July 1, 2025, used machines will also qualify for a special depreciation allowance of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine (keyword: "Growth Booster", § 7 section 2 EStG-E). Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 cm³ - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 Bjdpfx Ajyc Ewxem Ijlg - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max. platen distance: 1050 mm - Min. mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras: - Core pull The machine is very well maintained and can be inspected under power. Please note: any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: - Loaded free onto buyer's truck or free delivery to site against reimbursement of freight costs. Information about our machines and company: - We only sell machines from our own stock, acquired from active production, located at our Hanover warehouse - All offered machines are checked and tested prior to removal - We do NOT sell insolvency equipment and act NOT as brokers trading third-party property - All machines offered originate from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 8.000 kN, diameter sekrup: 90 mm, lebar total: 3.000 mm, tinggi total: 2.500 mm, berat keseluruhan: 44.000 kg, panjang produk (maks.): 8.900 mm, Hydraulic injection moulding machine from 2003. This Engel DUO 5550/800 features a clamping force of approx. 800 tonnes and a screw diameter of approx. 90 mm. It has a shot volume of about 2700 cm³ and a maximum injection pressure of about 1900 bar. If you are looking for a high-quality injection moulding machine, you should consider the Engel DUO 5550/800, which we are offering for sale. Contact us for further details. • Injection volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticising rate: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle system), larger mould space for easier changeovers, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticising; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g. bumpers, dashboard modules), large housings and covers, industrial parts, thick-walled technical parts • Advantages: High clamping force for large parts, more compact than conventional tie-bar machines, robust industrial design, easy to automate Additional equipment • Not specified/included in the information provided Bjdpsy Alwmofx Am Islg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 58.001 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.000 kN, diameter sekrup: 25 mm, volume langkah: 59 cm³, tekanan injeksi: 20 batang, tinggi cetakan (min.): 250 mm, gaya ejektor: 25 N, lintasan ejektor: 100 mm, berat keseluruhan: 3.900 kg, Perlengkapan: dokumentasi / manual, Mesin ruang bersih Engel E Max tahun pembuatan 2008 termasuk robot linier GEKU SR 500 ST. Mesin telah beroperasi otomatis dengan hampir 58.000 jam pompa. Mesin ini berasal dari produsen ternama di bidang farmasi, sehingga mesin beserta sistem penanganannya selalu menjalani manajemen perawatan yang sangat ketat dan berada dalam kondisi sangat baik. Bljdot A Ufwopfx Am Ieg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.300 mm, lebar total: 1.291 mm, panjang total: 4.083 mm, diameter sekrup: 2.522 mm, gaya penjepit: 1.300 kN, tekanan injeksi: 2.400 batang, berat keseluruhan: 10.600 kg, Semua data teknis tersedia dalam PDF. Mesin telah beroperasi otomatis hampir 33.107 jam. Karena perkembangan terbaru – Catatan dan keuntungan pajak untuk mesin bekas: Bedpfjxd H A Rex Am Ielg Mulai 01.07.2025, mesin bekas juga dapat dikenakan pengurangan pajak khusus sebesar 30% per tahun. Selain harga yang lebih rendah dibandingkan mesin baru, Anda juga dapat mengajukan jumlah penyusutan yang sama seperti mesin baru. Kata kunci: Pendorong pertumbuhan (§ 7 ayat 2 EStG-E)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 33.108 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, diameter sekrup: 25 mm, volume langkah: 79 cm³, tekanan injeksi: 2.398 batang, gaya ejektor: 6.100 N, lintasan ejektor: 100 mm, langkah pembukaan: 606 mm, panjang pelat: 750 mm, lebar pelat: 850 mm, berat keseluruhan: 10.600 kg, Perlengkapan: dokumentasi / manual, Detail Teknis Pabrikan: Engel Model: V 330H/80V/130 Combi Cleanroom Tahun Pembuatan: 2006 Jam Operasi: 33.107 jam Diameter sekrup: 25/22 mm Berat mesin: 10.600 kg Perlengkapan tambahan termasuk: Robot GEKU SR 500 ST Bjdst A Ui Aspfx Am Ijlg Kandang pelindung Meja putar Mesin telah berjalan hampir 33.107 jam dalam mode otomatis.