Beli Epson Surepress L-6034 bekas (65.025)

Kondisi: sangat baik (bekas), en: Epson G10-854SR Robot Assembly Station / Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = Heat Sink, SW = Front Wall Bracket) Section 3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards enters the dispensing area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position. - The x-y-z handling system moves the dispensing head to the designated position and starts the dispensing process. - Once dispensing is successfully completed, the handling moves to the home position and the WT is placed back onto the conveyor belt. - The carrier is then conveyed into the assembly area KK+SW (condition: no WT in the pick & place position). Section 3.2: Assembly Area KK+SW - A WT moves from the dispensing area into the KK+SW assembly area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position; at this stage, the side walls of the partially assembled unit's chassis are aligned. Fgedpfx Aoibx S Nolyjf - Simultaneously, KK-tray and SW-tray positioning occurs. - A stack of KK-trays (12) and a stack of SW-trays (12) are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety gates are opened and the loaded tray stacks move into the gripping position of each stacker. - The two safety gates are closed again. - The respective grippers pick up the appropriate tray. - Using the Z-axis, trays are separated and transported upwards (above their pick-up height). - For centering and tray stabilization, a centering support is positioned under each tray via x-handling. - The stacker Z-axis then places the respective tray onto the centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the KK is taken from the tray and placed in an intermediate position for alignment (to compensate for inaccuracies when picking up—maintained gripping position for assembly). - The KK is scanned, picked up again, and if the scanner’s result is OK, it is assembled onto the WT. - Defective (n.i.O.) KKs are placed in a defective component box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and assembled onto the WT. - The process continues with the assembly area front. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Maximum Operating Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Moment of Inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User Cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cable: 3m Financing via our bank is possible as well. complete-concept.leasingo.de

Kondisi: sangat baik (bekas), EPSON robot G6-451S Controller RC180 Robot Fjdpehx Rg Iefx Alyegf

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 3.200 l, Perlengkapan: dokumentasi / manual, BRINOX 3,200 L Solution Tank – 316L – Jacketed – TÜV / PED Module G – FAT – 2020 – Like New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product type: ELUTION / Solution Tank Volume: 3,200 litres Material: 1.4404 (AISI 316L) CE marking: present (CE 0036) Tank pressure: Operating pressure: -1 / +3 bar Test pressure: as per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: as per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel as per PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel underwent a documented FAT as part of the project. The tests performed included: • Weld documentation review • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness test • Sensor calibration check • Layout and dimensional check • Documentation review Full FAT report including all test protocols is available. DESIGN • Double jacket for heating/cooling Fedpfx Ajykkhrjlysgf • Completely made from stainless steel 316L • Highly polished internal surface • Pharmaceutical-grade welds • CIP/SIP-capable ports • Multiple manways / inspection openings • Clamp and flange connections • Instrument mounting prepared (pressure, temperature, sensors) • Heavy-duty project specification • Lifting lugs for crane handling CONDITION • Never used in production • Stock item from surplus project • Interior absolutely clean • No corrosion • No signs of use • Factory-new industrial condition • Immediately available DOCUMENTATION – complete and well-structured A comprehensive, project-specific quality and manufacturing documentation set is available for the vessel, including: • EU declaration of conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Material certificates (3.1) • Welder lists and weld procedure qualification records (WPQR/WPS) • Nondestructive test reports (NDT) • Analysis certificates for welding filler material and shielding gas • Roughness protocol • Surface treatment report • Dimensional accuracy inspection • Internal pressure test record • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation file available in digital format. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURES This is not a standard tank, but a high-quality, BRINOX project-manufactured vessel in genuine pharmaceutical quality, with certified pressure design, full PED compliance (Module G), documented FAT test, and comprehensive quality documentation. Project-level quality for sterile applications – immediately available.

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 1.000 l, Perlengkapan: dokumentasi / manual, BRINOX 1,000 L Pre-Charging Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-charging / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product-contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel per PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD ID number: 0036 FAT – Factory Acceptance Test Complete in-factory FAT carried out and documented. Tests incl. pressure test, NDT, dimensional check, roughness measurement, and documentation release. DESIGN • Cylindrical horizontal pressure vessel • Double jacket for heating / cooling • Internally electropolished • Pharmaceutical-grade welding • Manhole DN500 • Multiple process and measurement nozzles • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION • Never used in production Fodpfx Ajykt T Rjlyogf • TÜV Module G certified • Industrial as-new condition • Immediately available DOCUMENTATION – fully available Complete structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design review • FAT documents • Material certificates • Welder lists and WPS/WPQR • NDT reports • Roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Calibration certificate for pressure gauge • Partial drawings • Compilation with parts list • Operating and maintenance manuals (unit & components) • Qualification certificates • Analysis certificates welding consumables and shielding gases Complete digital documentation file available. SUITABLE FOR • Pharmaceuticals • WFI / PW • GMP installations • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical-grade design with PED Cat. IV Module G individual inspection by TÜV SÜD, complete FAT, and comprehensive technical documentation. Immediately available.

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 3.500 l, Perlengkapan: dokumentasi / manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial No.: 1003460 Year of Manufacture: 2020 Condition: As New / Unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch Tank / Pressure Vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product-contact material: 1.4435 (AISI 316L) Jacket: 1.4404 (AISI 316L) CE marking: CE 0036 Permissible pressure vessel PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible pressure jacket PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid Group: 2 Design in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (Notified Body No. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent complete FAT testing and release at the manufacturer’s site. Tests performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT as per test plan) • Dimensional and drawing verification (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration check of pressure gauges • Verification of markings • Complete documentation review FAT protocols are fully available. EXECUTION • Cylindrical, horizontal vessel • Double jacket with half-pipe coil system • Internal surface electropolished and passivated • High-gloss polished product-contact surfaces • Pharmaceutical-grade weld seams • Manway DN 500 • Powder/inlet socket DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – complete and well-structured Comprehensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for filler and shielding gases • Company qualification certificate Fedpsylng Uefx Alysgf • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity statements of installed components • Complete parts list • Part drawings • Operating and maintenance manuals Complete digital documentation dossier included. CONDITION • Never used in production • Stock item • Internal surfaces in absolutely as-new condition • No corrosion • No signs of use • Factory-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP-compliant production facilities • Biotechnological applications SPECIAL FEATURE High-end BRINOX pharmaceutical-grade manufacturing with complete PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and full FAT documentation. Not a standard tank – but a tested, project-quality vessel with comprehensive GMP-compliant documentation.

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 9.000 l, Perlengkapan: dokumentasi / manual, BRINOX 9000 L GMP Washing and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The vessel was used in a pharmaceutical production facility. Suitable for the preparation, storage, and provision of process solutions in GMP environments. Construction and Features Cylindrical stainless steel vessel in horizontal configuration Process connections on end faces Large manway with pressure-tight cover Integrated CIP system with spray ball Highly polished internal surfaces Hygienic product-contacting fittings Multiple measurement and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel feet included in delivery Condition Visual and technical condition: Very good. Internal surfaces mirror-polished and clean. No visible damage to the jacket or connections. Accessories and attached components as per photo documentation included. FAT and Documentation Status According to the FAT documentation “IT-11.1 Welding Documentation Inspection”, the welding documentation was reviewed during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: Identification of welders and weld seam inspectors Welder qualifications according to EN ISO 9606-1 WPS and WPQR documentation Evidence of shielding gas suitability Documented test welds Random visual inspection without complaints Traceability according to 3.1 material certificates Fgsdpjykkk Hjfx Alyef The complete welding documentation is part of the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness measurements Leak test Welding plan WPQR WPS Welder qualifications Borescope inspection report Goods receipt inspection reports Sensor calibrations The complete technical documentation is available in digital format. Special Features Fully documented GMP version with verified welding documentation and comprehensive quality package. Very well suited for reinstallation in pharmaceutical production plants or applications requiring validation.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 61 kg, kapasitas angkut: 10 kg, jangkauan lengan: 850 mm, rentang pivot: 360 °, produsen pengendali: Seiko Epson Corporation, model controller: RC700-A, produsen teach pendant: Seiko Epson Corporation, lebar kabinet kontrol: 430 mm, tinggi kabinet kontrol: 200 mm, tegangan masuk: 240 V, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 0,025 mm, The robot cell consists of: SCARA Robot G10-854SR (10 kg class, 850 mm reach) Controller RC700-A (200–240 V, 2.5 kVA) Teach Pendant TP3 (24 V DC) Total Electrical Supply Main supply: 200–240 V AC Teach pendant: 24 V DC Maximum controller output: 2.5 kVA Typical Industrial Applications - Assembly of heavy components - Packaging & palletizing - Loading & unloading - Multi-gripper handling EPSON SCARA G10-854SR Manufacturer: Seiko Epson Corporation (Japan) Model: G10-854SR Type: 4-axis SCARA, externally-oriented horizontal articulated arm Year of Manufacture: 05/2018 Serial Number: GA1013262 Net weight: 48 kg Payload (nom./max.): 5 / 10 kg Reach: 850 mm (450 + 400 mm) Z-axis stroke: 420 mm (standard) / 390 mm (cleanroom/IP) Repeatability (J1+J2 / J3 / J4): ±0.025 mm / ±0.010 mm / ±0.005° Continuous press-in force: 250 N Motor output (A1 / A2 / A3 / A4): 750 W / 600 W / 400 W / 150 W Protection class: IP20 / IP54 / IP65 / ISO3 & ESD Mounting options: Floor / Ceiling / Wall Certification: CE EPSON RC700-A Controller Manufacturer: Epson Model: RC700-A Year of Manufacture: 04/2018 Serial Number: R7GL017210 Supply: AC 200–240 V, 50/60 Hz, 1 Phase Power consumption: 2500 VA max Fgsdpoyka Dpefx Alyof Weight: 12 kg Multitasking: up to 48 tasks Functions: Conveyor Tracking / Vision Guide 7.0 / Multi-robot operation Interfaces: Fieldbus systems / Expansion modules Compatible teach pendant: TP3 Certification: CE EPSON TP3 Teach Pendant Manufacturer: Epson Model: TP3 Serial Number: LC05TESE05 Date of Manufacture: 01.12.2021 Supply: DC 24 V Current consumption: 0.7 A Display: HD capable Integration: fully integrated with RC700-A Applications: Programming / Diagnostics / Maintenance / Visualization Certifications: CE / EAC / KC Origin: Made in China

Kondisi: baru, - Material: DIN 1.4301, bagian atas dan kubah dari DIN 1.4404 - Permukaan dalam: III d, sambungan las diasamkan dan digosok - Permukaan luar: bermotif marmer - Kapasitas: sekitar 2400 L Fgsdpfx Aleym Auijyef Dimensi: - Kedalaman: sekitar 1310 mm - Lebar: sekitar 1080 mm - Tinggi jaket pendingin: sekitar 1750 mm - Tinggi dasar: sekitar 450 mm - Tinggi total: sekitar 2570 mm Perlengkapan: - 4 kaki yang dapat diatur - Manhole persegi panjang 420x320 mm - Saluran sisa dengan katup cakram NW40, Fredrich no 2 NW40 - Saluran keluaran cairan jernih dengan ball valve NW40, Fredrich no 2 NW40 - Indikator level cairan - Katup pengambilan sampel - Termometer digital - Double jacket dengan pipa naik ke atas - Papan label identifikasi - Gantungan tangga - Kubah NW 300 dengan ventilasi NW 50 - Telinga pengait crane

Kondisi: baru, - Material: DIN 1.4301 - Permukaan dalam: IIId, sambungan las diasam dan digosok - Permukaan luar: mantel digosok-SBR - Volume: sekitar 1940L Fgodpoym Au Aofx Alyef Dimensi: - Diameter: sekitar 1110 mm - Tinggi mantel: sekitar 2000 mm - Jarak bebas ke tanah: sekitar 400 mm - Tinggi total dengan galangan: sekitar 2900 mm Perlengkapan: - 3 kaki yang dapat disesuaikan - Pintu persegi panjang 420x320 mm - Saluran sisa dengan ball valve NW50, DIN 11851 - Saluran bening dengan ball valve NW50, DIN 11851 - Indikator level dengan handwheel - Pengambilan sampel dengan handwheel - Selongsong batang celup dengan termometer digital - Pillow-Plate - Braket untuk papan nama - Gantungan tangga - Tutup bergerak dengan koneksi NW50, pompa dan selang udara - Katrol tali untuk mengangkat tutup

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 8745, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 500 mm, panjang meja: 2.500 mm, kecepatan spindel (maks.): 10.000 rpm, RINCIAN TEKNIS Panjang meja: 2.500 mm Lebar meja: 500 mm Diameter maksimum alat pemotong kepala frais: 160 mm Diameter maksimum alat pemotong penutup spindel: 160 mm Kemiringan spindel: otomatis Penyesuaian ketinggian spindel: otomatis Penyesuaian kecepatan spindel: manual, bertahap Kecepatan spindel: 3.000–10.000 RPM Jumlah kecepatan: 2 Rem motor: ada RINCIAN MESIN Daya motor utama: 7,5 kW Dimensi & Berat Dimensi (P x L x T): 1.800 x 1.200 x 1.900 mm Berat mesin: 1.200 kg Jumlah paket pengiriman: 1 PERALATAN Unit pengumpan Mec4v (jumlah roda pengumpan: 3) Panduan (merek Aigner) Fedpjzrmp Hsfx Alyogf

Kondisi: bekas, Fungsionalitas: belum diuji, nomor mesin/kendaraan: ML944E08, kecepatan spindel (maks.): 8.000 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 5.500 kg, tegangan masuk: 400 V, Pusat pemesinan vertikal CHEVALIER QP2033-L. Fgedozfgmxepfx Alyjf Mesin tersedia untuk inspeksi di Riga, Latvia. Mesin saat ini terhubung listrik dan dapat diperiksa dengan membuat janji terlebih dahulu. Foto tambahan dan informasi teknis tersedia atas permintaan.

Kondisi: baru, berat kosong: 3.080 kg, berat muatan maksimum: 11.320 kg, berat keseluruhan: 14.400 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.480 mm, suspensi: udara, ukuran ban: 205/65 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 205/65 R 17,5, ukuran ban belakang: 205/65 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat kosong: 2.950 kg, berat muatan maksimum: 11.450 kg, berat keseluruhan: 14.400 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.200 mm, lebar ruang muat: 2.480 mm, suspensi: udara, ukuran ban: 205/65R17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 205/65R17,5, ukuran ban belakang: 205/65R17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baik (bekas), Tahun pembuatan: 2011, panjang sabuk konveyor: 3.100 mm, lebar sabuk konveyor: 900 mm, tinggi pembuangan: 1.000 mm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, MB Conveyors PA ALL (2011) Fgsdsyf Ndzepfx Alyof Panjang = 310 cm Lebar = 90 cm Tinggi = 100 cm

Kondisi: baik (bekas), Tahun pembuatan: 2009, Number of axes: 6 Payload: 5 kg Fgedpfx Alev Hdk Ieyef

Kondisi: baru, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, BAUMULLER DSF 160 L 54 W 15-5 Fgedpozr H H Eefx Alysf

Kondisi: bekas, Tahun pembuatan: 2020, Mesin Erosi Elektrokimia / EDM Jarak pergerakan sumbu X: 350 mm Jarak pergerakan sumbu Y: 250 mm Jarak pergerakan sumbu Z: 270 mm Ukuran meja (sumbu X): 600 mm Ukuran meja (sumbu Y): 400 mm Ukuran benda kerja maksimum (sumbu X): 975 mm Ukuran benda kerja maksimum (sumbu Y): 555 mm Ukuran benda kerja maksimum (sumbu Z): 350 mm Berat elektroda maksimum: 50 kg Berat benda kerja maksimum: 550 kg Fgsdpfxeztpk Ao Alysf Peralatan pendingin

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), 2054 1 used, partially refurbished and function-tested Fsdsiyya Ajpfx Alysgf Alphatec extruder type AE-S 75.28 Screw diameter: 75 mm, 28 L/D Drive: 75 kW AC motor Screw speed up to 80 rpm, adjustable 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control – type Inspection possible at our facility in Wuppertal. Further extruders available.

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), No. 2054 1 used, partially overhauled and function-tested Alphatec Extruder Type AE-S 75.28 Screw diameter – 75 mm – 28 L/D ratio Drive 75 kW – AC Fgsdpfx Aleiyx Uzjysf Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x downstream temperature control zones Control cabinet – NEW control system – Type Inspection possible at our factory in Wuppertal. Further extruders available.

Kondisi: baru, berat kosong: 3.780 kg, berat muatan maksimum: 6.720 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.100 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.420 mm, volume ruang muat: 42 m³, suspensi: udara, ukuran ban: 245/70 R 17,5, jarak roda: 990 mm, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 245/70 R 17,5, ukuran ban belakang: 245/70 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan, tail lift,

Kondisi: baru, berat kosong: 3.780 kg, berat muatan maksimum: 6.720 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.100 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.420 mm, volume ruang muat: 42 m³, suspensi: udara, ukuran ban: 245/70 R 17,5, jarak roda: 990 mm, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 245/70 R 17,5, ukuran ban belakang: 245/70 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan, tail lift,

Kondisi: baru, berat kosong: 3.780 kg, berat muatan maksimum: 6.720 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.100 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.420 mm, volume ruang muat: 42 m³, suspensi: udara, ukuran ban: 245/70 R 17,5, jarak roda: 990 mm, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 245/70 R 17,5, ukuran ban belakang: 245/70 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan, tail lift,

Kondisi: baik (bekas), Tangki hidrolik, wadah hidrolik, wadah aluminium untuk pompa hidrolik, unit hidrolik -Kondisi: sebagaimana adanya saat diperiksa -Indikator level: rusak, lihat foto -Tangki hidrolik: tangki hidrolik untuk unit hidrolik Fgsdpszr Up Usfx Alysf -Kapasitas tangki: sekitar 65 L / 250x930x280 mm -Komponen individual: lihat foto -Dimensi pengiriman: 930/440/T425 mm -Berat: 16,6 kg

Kondisi: baru, berat kosong: 3.650 kg, berat muatan maksimum: 6.850 kg, berat keseluruhan: 10.500 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.250 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.420 mm, volume ruang muat: 37 m³, suspensi: udara, ukuran ban: 245/70 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 245/70 R 17,5, ukuran ban belakang: 245/70 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan, tail lift,

Kondisi: sangat baik (bekas), NOMOR KATALOG 7678 SPESIFIKASI TEKNIS - Panjang rel pemandu: 1670 mm - Panjang pemotongan: 1500 mm - Pelumasan otomatis pada sistem pemotongan - Sistem peredam dan penegang pada kepala Fgedpfxjzh If Io Alyof - Penyetelan rel secara manual - Motor listrik 7,5 kW - Dimensi untuk transportasi (p/l/t): 1650x900x2350 mm - Berat total: 240 kg KEUNGGULAN – Produksi Austria – Untuk memotong paket atau kayu bulat – Tanpa cat – Mobil, dengan roda – Gergaji bekas, kondisi sangat baik Harga netto: 25.900 PLN Harga netto: 6.160 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah seiring fluktuasi nilai tukar yang signifikan)