Beli Ima Guk Cartoner bekas (5.158)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGEBANDING MACHINE (LEFT-HAND SIDE) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edges possible with limitations up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorised timing belt Spray unit (for liquid anti-adhesive) Adjustable fence Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (number of compartments): 2 Chodpfxsr Ttfle Aagja End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and contour trimming) 08.342 CNC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal routing unit for grooving/rabbetting and profiling 08.190 (1 x 4.5 kW)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW Chsdpfxjtixpue Aagsa WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), de-hu-01 Cjdpjyk Tkvofx Aagoha

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Chedsw A Ruqspfx Aagsa Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Cjdpfx Aasi Hn Srjgeha Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Chedpjkt Uuasfx Aagsa Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC Codpfxsq Nmuto Aagjha No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Cedeltmnlspfx Aagoha Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Pressure beam: driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable guide fence, CNC controlled Joint milling unit 08.379 (2 x 4.0 kW) Gluing unit (hot melt adhesive & PUR glue) 283.1513 Csdod Nt N Hepfx Aageha Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Pre-milling unit 08.055 (2 x 1.0 kW) Copy shaping unit (profile copy) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) Return conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Chedpoifnzdjfx Aagea Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Tahun pembuatan: 1998, Kondisi: baik (bekas), Schraubverschließer für Kunststoffkappen, Durchmesser 50 mm x 20 mm Höhe, 380V, 7,5 kW. Maschine mit Kappen-Zuführung/Sortierer und Kappenerkennung (keine Kappe-Detektion). Geschwindigkeit bis zu 50 Stück/Minute. Verkauft wird der aktuelle Zustand (as-is) oder nach Kundenwunsch angepasst. Cjdpfxsh Np Uqs Aageha

Kondisi: sangat baik (bekas), de-hu-01 Chedpfoyxl Siex Aagja

Tahun pembuatan: 2007, jam operasional: 138 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 900K707385, Tablet Press PRESSIMA – As New, in Delivery Condition Fully functional machine with complete documentation and software. Includes multi-tip tooling set EU-D (5 × 4mm) (original price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel Codoy Hl Aqspfx Aagjha • Digital display of parameters set via handwheels • Note: no automatic control system present Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feeder shoe: dual-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total consumption: 1.5 kW • Machine housing and compression area: stainless steel • Compression area paint-free, easy access, hard-nickel-plated surfaces • Central connection for dust extraction • Central manual lubrication of punches via hand pump • Automatic lubricant pump for punches and slide rails • Feeder shoe motor integrated in head section Mechanical Features • Handwheels for tablet thickness, main compression, pre-compression, and fill adjustment • Rotary flap between feed tube and feeder shoe • Solid pre- and main compression stations • Scrapers on upper and lower punches • Brake magnets on lower punches • Standard 12 mm fill cam • Lower punch retraction after dosing • Lower slide rail and lifting cam easily removable • Machine status indicator on operator panel Measurement and Evaluation System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main upper compression o Main lower compression o Pre-compression upper o Ejection force o Scraper force o Upper and lower punch displacement • Signal amplifiers for main compression, pre-compression, ejection, and scraper force included Equipment / Features • Upper and lower punch shaft bores with 4.8 mm keyways for guided tooling • Chamber filling shoe • Hard-chromed turret • Main compression force measurement including display on operator terminal • Accessory set Type 8 MX: o 4 blind dies EU-B o 4 blind dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP Panel possible.

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Chedpfx Aasvxhnuegsa Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Chjdowbp Nwepfx Aagoa Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Codefi Tg Hjpfx Aagsha Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: sangat baik (bekas), Faltmaschine GUK SA30 / FA30 / 4 SVA Die Maschine ist voll funktionsfähig und einsatzbereit. Hergestellt in Deutschland. Chjdpfx Aajwzvpwogja Ausstattung: – 4 Taschen – mobile Auslage – Zähler mit Verpackungsfunktion – großvolumiger Anleger, integrierter Kompressor – schallgedämmte Kassettenabdeckungen – Werkzeugset Technische Daten: max. Format: 300 x 420 mm min. Format: 100 x 150 mm kleinste Falzbreite: 45 mm Arbeitsgeschwindigkeit: 200 m/min Stromversorgung: 400V

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 20787, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Center. The machine features a gantry construction, designed for the production of furniture, staircases, and special components. A large Z-axis range (600 mm) allows for the machining of tall workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled via IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC woodworking machining center (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z axis – large clearance) • Number of axes: 3–5 (depending on configuration and operating head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Spindle speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm Chedpfx Aaoyky Hdjgea • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 🪚 Machining Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • lock case milling • grooving saw • fitting aggregates (Blum / Lamello) • angle head aggregates 🧲 Work Table • Vacuum pod & rail table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control System • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • Approx. 6,500 – 8,500 kg (depending on configuration)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 24406, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 900 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – technical specifications (main) 🔹 Working area (axis travels) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, panel nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Functions and equipment (typical) • 5-sided drilling (top + X+/X−/Y+/Y− edges) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel cutting combined with machining) • Automatic lubrication • Waste and chip conveyor (belt) ⸻ Chodpsykn Dwjfx Aagja 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture typically found on the market: approx. 2010–2016 (often 2014) • Application: furniture, MDF panels, HPL, solid wood, nesting

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Chodpfx Aaoyttrxjgea Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: baik (bekas), Tahun pembuatan: 1989, Mesin dengan perlengkapan lengkap Panjang sekitar 9 m Penyambungan Pemotongan tepian Chsdpfxjf Ua R Ho Aagoa Pra-frais Frais pembulatan Penyalinan sudut Pisau tarik Poles Penyalinan sudut

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Details: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Suction Machine Serial No.: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specs: 220/380 V, 3 phases, 50 Hz Space Requirements: approx. 400 × 140 × 220 cm Description & Key Features: - The rotary air rinsing machine is designed for pharmaceutical and medical applications and is suitable for GMP-compliant interior cleaning of stable, round glass or plastic bottles using sterile compressed air. - Fully automatic bottle cleaning and suction - Processes up to 200 containers per minute - Includes format parts for plastic bottles Ø 44 mm × height 95 mm - Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm - Operating principle: Bottles are individually separated via conveyor belt and feed screw, transferred to a carousel, gripped by tongs, rotated 180°, then cleaned with air nozzles (blowing) and suction heads (extracting). Afterwards, bottles are transferred to the conveyor belt and downstream machine. - Suitable for bottles and cans made of plastic and glass - High degree of automation, GMP-compliant design Documentation & Papers: - Operating manuals (German, English, Italian) - Electrical wiring diagrams - Layout drawings / Guards Layout - Spare parts catalog Cjdpfxsw Sfa Ee Aagsha - Blowing diagram / Electric diagram - FAT and SAT documentation - Machine and operator manual in German Scope of Supply: - Complete machine - Spare parts as per catalog - All original documentation (PDFs and printed papers) - Format sets for various bottle sizes Condition: - Used, from pharmaceutical production - Ready for immediate operation after installation - Immediately available Location: Çorlu, Turkey Price: On request

Kondisi: sangat baik (bekas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE Codpsun N Dlofx Aagjha The line consists of the following machines: A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotation Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) Chsdpfeu Ekbnjx Aagsa FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins Chjdpfxounrwns Aagea FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°