Beli Kantenanleimmaschinen Holz-Her Arcus 1336 2011 bekas (7.512)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HOLZ-HER Accura 1558 Performance Edge Banding Machine with Belt Bridge and Intelligent Equipment Package for Edge Thicknesses up to 15mm. Kedpfxoyfgrpj Afiedk Effortless program changeover and tool adjustment via 18.5” full-colour touch screen (16:9). Short glue system heating time with GlueJet (GJ 301 automatic), approx. 2–3 minutes depending on adhesive type and ambient temperature. Always fresh adhesive thanks to the GlueJet application system and adhesive cartridges. PUR glue changeover and system cleaning is straightforward and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for film-protected materials, such as high-gloss and super-matt! One of the major highlights of this machine is the multifunction package, particularly advantageous for operations handling a wide variety of edge materials. The DIA tools are multi-stage and can switch between radii and chamfers as required – from the longitudinal milling unit to corner copying and up to the profile scraper blade. The extendable workpiece support and extended infeed area with air-cushion table facilitate processing of large workpieces. A guiding system assists with the infeed of small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material-dependent) Edge thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for EVA and PUR grades, with minimal effort required. All common edge types processed, including high-gloss, super-matt, and solid wood edges up to 15 mm. Motorised infeed fence adjustment Narrow part guide system Prepared for connection to a RETURN system Motorised pressure bridge with upper belt feed Multifunctional units for fast changeover between radius, flush, and chamfer Spray units (vertical & horizontal) and much more. Delivery, installation, and operator training for the machine can be provided by us at an additional cost. The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Kondisi: baik (bekas), Tahun pembuatan: 2001, 1 Ksdji U Dxuspfx Afisdk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, lebar benda kerja (maks.): 65 mm, panjang benda kerja (maks.): 250 mm, kecepatan pemakanan sumbu X: 10 m/menit, berat keseluruhan: 1.200 kg, 1 Kdsdpfx Afox Rbm Heiok

Kondisi: bekas, Tahun pembuatan: 1984, Used Manufacturer: Holz-Her Model: 1215 Year of manufacture: 1984 Motor: 4.0 kW Cutting length: approx. 5300 mm Kedevwgi Ijpfx Afijdk Cutting height: approx. 2200 mm Central support Saw blade diameter: approx. 300 mm, cutting depth: 80 mm Free-standing unit Retractable slatted rack Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee.

Kondisi: bekas, Tahun pembuatan: 1981, Used, good condition Manufacturer: Holz-Her Model: 1215 Year of manufacture: 1981 Machine no.: 710 Motor: 4.0 kW Cutting length: approx. 5300 mm Cutting height: approx. 2100 mm Cutting depth: 80 mm Kdjdovwfmxopfx Afijk Saw blade diameter: approx. 300 x 30 mm Free-standing Slatted frame retractable Required space: approx. 6550 mm x 1265 mm x 2895 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Delivery in as-inspected condition No warranty or guarantee

Kondisi: bekas, Tahun pembuatan: 1983, Used Make: Holz-Her Model: 1215 Year of manufacture: 1983 Machine No.: 1222 Cutting depth: 80 mm Motor: 4 kW Cutting length: approx. 5300 mm Cutting height: approx. 2000 mm Saw blade diameter: approx. 300 mm Freestanding Slatted frame retractable Extraction connection diameter: approx. 100 mm Kdjdpfxsvwfnpe Afiok Space requirement: approx. 6300 mm x 1100 mm x 2700 mm Weight: approx. 1000 kg Total connected load: approx. 3 kW Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sold as inspected, in current condition No warranty or guarantee

Kondisi: baru, Platten Saw HOLZ-HER 1255 SECTOR pro - Demonstration machine - Cutting height: 2,200 mm Cutting length: 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience with a solid construction, providing exceptional value for money. Your advantages: - Fully welded frame for extremely high rigidity Kedpfx Aou R Syiefiodk - Precise cutting quality - Final cut ready for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel cutting with a footprint from just 4 m² - Smooth, ergonomic operation TRK extraction system (mandatory in all CE countries – optional): Workplaces must meet the highest standards for health and safety. HOLZ-HER saws are among the cleanest and safest worldwide. Accessories The comprehensive range of accessories extends from convenient digital position indicators to our patented Super Cut plus scorer system. TECHNICAL DATA Vertical panel saw for cutting wood-based panel materials, such as chipboard, MDF boards, veneer panels, plywood, etc. Base machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/aggregate for accurate cutting. Manual feed for both vertical and horizontal cutting. Maximum cutting depth: 60 mm Saw beam: Stable, precision-guided saw beam. Pneumatic locking of the saw beam at upper and lower positions. Electrical monitoring in vertical cutting mode. Saw unit: Smooth, ergonomic operation for engaging/disengaging the saw unit. Swivel lever can be folded down in the upper position for precise plunging. Generously sized levers for easy pivoting. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-change chuck. Riving knife can be retracted. Control panel: Efficient, ergonomic machine operation at eye level. Lower workpiece support: Stable, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through. Extraction: Effective extraction through two ports: Saw unit Ø 120 mm, machine frame end Ø 100 mm (for TRK version). Lift-roller transport system: Manually raisable/lowerable rollers for gentle and easy panel handling. Measuring tape: For horizontal cutting with three manual measuring points: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the top edge of the panel This offer is a package configuration. The following items and options are included in the price: - Sliding support grid - Manual longitudinal fence for vertical cuts - Digital display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2.200 extraction unit - Strip stop for recurring horizontal cuts - new demonstration machine -

Kondisi: bekas, Holz Her Sprint 1312 FÜ + PU Desain berat - ketebalan tepi 0,4 - 12 mm Kontrol layar SPS Unit pra-pemotongan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material gulungan dan potongan Stasiun aplikasi lem: sistem cartridge + lem PU nozzle deteksi otomatis Tinggi benda kerja 6-55 mm Unit pemotong untuk gulungan dan potongan hingga ketebalan tepi 12 mm dengan penyesuaian kemiringan gergaji 0-10° Unit milling, milling rata hingga 12 mm, milling radius - chamfer milling - 15° MOT - 4 sumbu Unit pisau tarik untuk chamfer dan radius dengan 2 holder pisau tarik pneumatik penyambungan pneumatik masuk dan keluar Unit pisau tarik permukaan - finishing Sistem penyemprotan - PU Kdsdpfxox Eilqj Afiok Mesin dalam KONDISI SANGAT BAIK tersedia dari stok di Lieboch

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Kdodowka Nyopfx Afisk Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 2004, Mesin bekas Tahun pembuatan: 2004 Kondisi: Sudah diuji fungsinya Perlengkapan dan data teknis: Perjalanan sumbu: - Sumbu X: 2.685 mm - Sumbu Y: 1.095 mm - Sumbu Z: 140 mm Unit milling: - 6 kW, pendingin air - Dudukan alat: HSK 63 F Kdjdpfx Afex Enqboiek - Putaran: 1.000 - 18.000 rpm - Penukar alat: 6 posisi samping Kepala bor: - 9 spindle bor vertikal pada jarak 32 mm - Spindle bor horizontal: 1+1 - Spindle bor vertikal: 1+1 Gergaji alur: arah X Kontrol: Twin CAM 32 Pompa vakum: 100 m³/jam Termasuk suction cup vakum Dimensi: 5200 x 2843 x 1855 mm Berat: sekitar 3.500 kg Ketersediaan: sesuai kesepakatan Lokasi penyimpanan: Niedersachsen (Lower Saxony)

Kondisi: baik (bekas), Chip extraction unit, filter extraction, bag filter - Drive power: 0.96 kW - Speed: 2800 rpm - Connection: Ø 50 mm - Voltage: 380 V Kedpfx Afsb A E Uheiodk - Dimensions: 780/470/H340 mm - Weight: 135 kg

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bekas Tahun pembuatan: 2005 Kondisi: Rel pemandu sedikit aus, hanya cocok untuk pemotongan kasar Perlengkapan dan data teknis: Kjdpfx Afswqifksijdk - Panjang potong: 4300 mm - Ketinggian lewat maksimum: 2200 mm - Ketinggian pemangkasan maksimum: 2100 mm - Ketinggian scoring vertikal maksimum: 2100 mm - Kedalaman potong: 80 mm - Motor: 5,5 kW - Kecepatan putar mata gergaji: 4500 rpm - Diameter mata gergaji: 300 mm - Ekstraksi debu: 2 x 100 mm - Konsumsi udara bertekanan: 60 NL/menit Dimensi: 5620 x 1480 x 2990 mm Ketersediaan: segera Lokasi gudang: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle - Pressing unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm Kdedpfjwka H Sjx Afiok - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Kondisi: bekas, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for unit adjustment Pre-milling unit for pre-milling before gluing station Kedsxu E Nwepfx Afijdk Fully automatic edge magazine for roll and strip material GLU-JET cartridge adhesive application station + PU bonding Adhesive application by nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic switchover from 0-10° inclination for end saws Pneumatic milling unit, flush trimming up to 6 mm, radius milling - chamfer milling - 15°, programmable via control panel Scraper unit for chamfers and radii with 2 scraper holders Pneumatic infeed and outfeed Flat scraper unit - finish Spray device - PU Machine is FACTORY-REFURBISHED and in TOP CONDITION

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm Kedewka Upjpfx Afiedk - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Tahun pembuatan: 1989, Kondisi: baik (bekas), - tilting spindle - shaft diameter 50 mm - height adjustment - pneumatic spindle position adjustment Kdedpfx Afjgxpilsiok - power supply 400V - feed mechanism is not included in the offer

Kondisi: bekas, Tahun pembuatan: 2007, Mesin bekas Tahun pembuatan: 2007 Perlengkapan dan data teknis: Sistem nesting dengan meja raster Ukuran pengerjaan: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Lintasan gerak: - X: 5665 mm - Y: 1650 mm - Z: 325 mm dengan unit milling 7933: - Motor 11 kW (S6) - HSK 63 - pendingin air dengan sumbu C dengan penukar alat tipe piringan 18 posisi dengan pompa vakum 250 m³ dengan unit pengoperasian manual Kedpfjwka Ipsx Afiodk dengan pelumasan sentral dengan sistem pelumasan minimum Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2001, 1 Kdedpfow I Ug Hjx Afiek

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bekas Tahun pembuatan: 2005 Perlengkapan dan data teknis: Jalur gerak: - Sumbu X: 2.685 mm - Sumbu Y: 1.095 mm Kdjdpfewka H Ejx Afiek - Sumbu Z: 140 mm Agregat milling: - 6 kW, pendingin air - Dudukan alat HSK 63 F - Kecepatan putar 1.000 - 18.000 rpm Penukar alat: 6 posisi, samping Kepala bor: - 9 spindle bor vertikal dengan pitch 32 mm - Spindle bor horisontal: 1+1 - Spindle bor vertikal: 1+1 Gergaji alur arah X Kontrol: Twin CAM 32 Pompa vakum 100 m³/jam Termasuk suction cup vakum Ukuran: 5200 x 2843 x 1855 mm Berat: sekitar 3.500 kg Ketersediaan: sesuai kesepakatan Lokasi penyimpanan: Röllbach

Kondisi: bekas, Tahun pembuatan: 2012, Used machine Year of manufacture: 2012 Base machine – Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Machining length: 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head and consoles Gantry design Helical rack and pinion drive in X and Y direction, ball screw in Z direction for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 – 20.6 Please refer to the relevant data sheets. Processing dimensions: Max. workpiece size for trimming: X = 6250 mm Kdsdpfx Aew I U Ecsfiok Y = 2100 mm Max. traversing path: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from top edge of table (without tool, without holder) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and inspection window Voltage: 400 V, 50/60 Hz CONTROL SYSTEM: Dual-core processor Operating system: Windows XP 80 GB hard disk / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for transferring control and program data. Data transmission takes place via high-speed internet connection Requirement: High-speed internet at the machine. DYNESTIC table Solid, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for clamping the wear plate 1 working area with stop rails / stops Height 30 mm, pneumatically lowerable 2 stop rails each in Y direction and 1 stop in X direction on the right (viewed from the front of the machine) Vacuum fields Single-circuit vacuum system Drilling unit 7976, 24 spindles Drive power 3.0 kW 18 individually selectable vertical spindles L-shaped arrangement, 10 in X and 8 in Y direction 32 mm pitch Max. drill bit diameter: 35 mm Total drill bit length: 70 mm from mounting end (depending on panel thickness) Spindle extension stroke: 70 mm Rotational direction: alternates between right and left Speed (n max) 1000 - 5710 rpm, stepless adjustment Mount: M10 thread – 11 mm fitting without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 double drilling spindle in Y direction Mount: M10 thread, 11 mm fitting Total drill bit length max. 70 mm from mounting end without tool, without holder Empty position 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed force Empty position 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) Max speed: 1000 – 24000 rpm, steplessly adjustable, two-stage feed stroke Max. output at 12000 rpm up to 24000 rpm air-cooled with HSK-F 63 tool holder with right-han

Kondisi: bekas, Panel saw Produsen: Holz-Her Model: 1265 Tahun: 1989 Spesifikasi teknis Dimensi kerja Dimensi pemotongan (mm) Panjang x Tinggi 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Tinggi potong pinggir = tinggi potong maks - 65 mm Kedalaman potong (mm): 45 (50) Kedalaman potong tergantung pada benda kerja Dimensi dalam tanda kurung tanpa Super Cut Unit gergaji Daya motor: 3 kW, 400 V, 50 Hz Diameter mata gergaji (mm): 220 Kecepatan mata gergaji (min) pada 50 Hz: 5450 Ekstraksi Konsumsi udara (m³/jam): 2000 Kecepatan udara (m/s): 20 Kedow I A Dyjpfx Afiedk Koneksi (mm): 160 Dimensi mesin Luas lantai Panjang (mm): 4315 / 5315 / 6315 Kedalaman (mm): 1420 Tinggi (mm): 2500 / 2640 / 2775 Berat (kg): sekitar 760 (5300 x 2200mm) Berat kotor (kg): sekitar 990 (5300 x 2200 mm)

Kondisi: bekas, Tahun pembuatan: 2014, • motorisierte Druckbrückenverstellung • Elektrische Vorschubregelung, stufenlos, 400 V / 50 Hz, 2,2 kW • Steuerung PPC 221 – mit 8,4'' VGA Farbdisplay Hochleistungssteuerung mit sehr einfacher Bedienung • Kanten-Vorfräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräseinheiten für das Vorfräsen der Plattenkante • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Vorfräsaggregat 1801 / 1802 • Fräser, Diamant Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Vorfräsaggregat 1801 / 1802 • Kantenmagazin 1903 SYNCHRO Automatischer Transport von Rollen- und Streifenmaterial • Leimstation Glu Jet GJ301, automatisch (2,3 kW, 50 Hz) • Andruckstation 1913, pneumatisch erste Walze angetrieben, 2 zusätzliche Andruckrollen mit pneumatischer Einzelsteuerung • Kappstation 1918 (60 mm), pneumatisch (2 x 0,45 kW, 12.000 U/min), pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827, pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Abtastrollen, manuell Manuelle Einstellung der vertikalen Abtastrolle in 0,1 mm Schritten zum Überfräsen von Decküberständen, z.B. bei Kunststoffkanten • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Linkslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Fräser, Diamant Ø 56/60 mm, Z = 2, R = 2,0 mm, Rechtslauf Vollwerkzeug, diamantbeschichtet mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Eckenkopieraggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min), für Kantenstärken bis 3 mm • Fräser, Diamant Ø 53 x 10 x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, für Profilaggregat 1832 Kdsdpox Huhcofx Afiek • Ziehklingeneinheit 1929, pneumatisch einschließlich pneumatischer Verstellung (separat für oben und unten) • HW-Wendemesser für Ziehklingenhalter 1929 / 1927 R = 2,0 mm (2 Stück erforderlich) • Flachziehklingeneinheit 1964 Entfernen von Leimresten für saubere Leimfugen. • Poliereinheit 1940 (2 x 0,12 kW, 50 Hz, 1400 U/min) Zur Endreinigung und Kantenpolitur. Mit 2 Textilscheiben, Schwenkbereich 0–5°.

Kondisi: bekas, translation Ksdpfx Aow Nad Hjfiodk

Kondisi: baru, Tahun pembuatan: 2025, maschinensucher-volltext-2025 Kjdpfxow Tfxws Afiodk

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Kdodpsvymdqefx Afijk Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim