Beli Kellenberger 1000-175 bekas (10.493)

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, fr-1 Csdoh Ad E Hjpfx Aqxjgw

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 125 mm, lebar di tengah: 600 mm, diameter roda gerinda: 400 mm, lebar roda gerinda: 50 mm, lubang roda gerinda: 127 mm, en1 Cgsdsyu Rd Iopfx Aqxsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Karstens K11 1000 This Karstens K11 originates from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. Being specialized in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical Data: - Distance between centers: 1000 mm - Center height: 180 mm - Workpiece weight: 70 kg between centers, 250 kg with support - Grinding wheel diameter: 400 mm - Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0 – 90° - Tailstock: MT4, quill stroke 45 mm - Tailstock rest beside Z-axis table - Quill force: 200–600 N - Table swivel: 12.5° - Adjustment travel for feed spindle: 80 mm - Rapid traverse distance: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine weight: net 3500 kg Cgsdpfx Aoh Rit Eoqxsw - Feed drive via DC motor - Air-cushion assisted rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. - Separate drives for the spindles for external and internal grinding. - Fully automatic operation with feed motion via rotary cam switch: rapid infeed, rapid retraction, grinding operation, feed stop, micrometer feed. - Automatic longitudinal grinding cycle - Central coolant supply for all grinding locations - Workpiece spindle stock with steplessly adjustable drive for live or lockable spindle. - Feed control for longitudinal and plunge grinding, input for retraction, feed amounts, feed rates, spark-out times, and idle strokes - Digital readout for X-axis from Heidenhain - Paper band filtration unit can be offered on request. Similar to Weiss/EMAG/GP cylindrical grinders/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: MIKA Seilzüge, demag-dr-seilzug-en Codpfxey D D S Ss Aqxogw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 900 mm, tech-details-en Csdpjytf Tbofx Aqxegw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, CAP 30 APPLICATOR 1000 UNTUK HELICAP 23 PRO: Tahun Pembuatan: 2019 Cgsdpfjyynd Rex Aqxew Versi: 400V 9.000 Jam Operasi Kondisi seperti baru Mesin masih beroperasi hingga 15 Mei.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Hib Akzent 1000 Model T1060-8 kontrol tang las Cedpfoxmuzmjx Aqxsgw Kondisi bekas sangat baik, berfungsi penuh. Lokasi barang: 75053 Gondelsheim Lihat gambar Pengiriman melalui ekspedisi atau pengambilan langsung

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 125 mm, panjang penggilingan: 600 mm, diameter penggilingan: 249 mm, panjang kabinet kontrol: 1.200 mm, lebar kabinet kontrol: 40 mm, kecepatan spindle penggilingan: 1.530 rpm, tinggi kabinet kontrol: 1.500 mm, berat keseluruhan: 3.250 kg, This listing is for a cylindrical grinding machine from the manufacturer Kellenberger. The machine is in very good condition. Manufacturer: Kellenberger Model: R 125x600 Technical data: Centre distance: 600 mm Cgjdpfoyyn Ehex Aqxsw Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic stepless speed: 0.02–6 m/min Minimum reversal travel: 1.5 mm Reversal dwell time, stepless: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with handwheel, coarse/fine: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid and return travel, hydraulic: 50 mm Infeed, electro-mechanical with stepper motor: 0–9.99 mm/ø Micro-stop infeed per division: 1 µm/ø Plunge grinding: Infeed speed coarse/fine: 1–49 / 0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor power: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Internal taper of spindle: Morse 5 Motor power: 0.9 kW Tailstock: Internal taper of sleeve: Morse 3 Sleeve travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding spindle head swivels: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 × 2.0 m As a world leader in Kellenberger overhaul/retrofit, we not only deliver machines in like-new condition with warranty, but also offer full service support for your equipment. The machine is geometrically overhauled and newly painted, featuring original electrics but equipped with a new WSS drive and controller using three-phase technology. Optionally available with splash guard doors and X-axis enclosure. – Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional features, subject to additional charge: – Swivel angle display for upper table – Rotary encoder with digital readout in the workpiece headstock – Rotary encoder with digital readout in the grinding spindle headstock (height adjustment via spindle not possible) – New robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment – Increase of center height up to max. 225 mm Included: – Operating tools – Clamping tube for chuck Further accessories available on request. This machine tool currently does not meet the fundamental safety and protection requirements as stated in BetrSichV 2015. Determination of the necessary minimum safety objectives must be performed via risk assessment in accordance with BetrSichV. Cgjdpfod Ih Dvox Aqxsw

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cgedpfsd Ih Dwex Aqxsw Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ± 6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – between centres: 130 kg incl. clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000 mm model. Included: -New control cabinet -Modern workpiece headstock from Advance model -New workpiece spindle drive -Modern hydraulic unit -Pneumatic lifting of the grinding headstock -Modern internal grinding attachment -Operating tools Extension: Upper table swivelling increased to 10° Optional: -Upper table swivel angle display -Workpiece headstock swivel angle display -Grinding headstock swivel angle display -Splash guard door for Z-axis -Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: -Machine service -Grinding technology consultation -Operator training -Spare parts -Accessories

Kondisi: bekas, Internal diameter: 340/440 mm Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet Cgedpfxod Ih Dxo Aqxew - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workhead swivelling 360° Grinding head swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed rate 0.001–0.030 mm/Ø Continuous feed rate 0–0.95 mm/Ø Table swivelling ±10° Table longitudinal travel 900 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (unsupported) 130 kg including clamping Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Required space approx. 3.1 x 2.0 m As a world-leading company in Kellenberger overhauling / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer you service for your machines metric overhauled and newly painted. Version R: Machine features central lubrication and roller guides in the flat bed of the X-axis as well as air lift in the grinding headstock. -Digital readout with 2 axes. Resolution X-axis 0.5 µm Available options at extra cost: -Rotary encoder with digital readout in the workhead -Rotary encoder with digital readout in the grinding headstock (no height adjustment via spindle possible) -New sturdy internal grinding attachment with diameter 80mm or 100mm with height adjustment -Increase in centre height to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories available on request. The machine tool currently does not comply with the fundamental safety and protection requirements as described in the BetrSichV 2015. An increase in the required minimum level of protection is to be determined by a risk assessment in accordance with BetrSichV. Csdpjd Ih D Nsfx Aqxegw

Kondisi: bekas, en-1 Cgjdjd Ih D Rspfx Aqxew

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base Csdpfxeuxfu Ns Aqxegw B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Cgedpfev Dxxzsx Aqxjw Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Cgodpfx Aqovq R Uzexow Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight approx. 3 t High-End Kellenberger 1500U Ideal for spindle manufacturers or spindle overhaul specialists - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in safety technology - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of spindle speeds - Swivel angle display – upper table - Swivel angle display – wheel head - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine has already been delivered. An identical machine can be assembled with additional options. At present, the machine does not comply with the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Cgodpfx Ajt Ii Rrsqxew The determination of the necessary minimum protective measures must be established through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Cedpfjd Ih D Esx Aqxogw Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Cgodpjvdk N Eofx Aqxew Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Tahun Model: 2002 Lebar: 1000 mm Panjang: 400 mm Tinggi: 700 mm Jumlah Sumbu: 5 Holder: SK50 Kecepatan Spindel (Rpm): 15.000 Cgodpfxox Uwr To Aqxow Jenis Material yang Dapat Dikerjakan: Baja, Aluminium, Titanium, grafit, Tembaga, Invar, Komposit, Derlin, Peek

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 250 mm, lebar di tengah: 1.500 mm, diameter penggilingan: 500 mm, Langkah pena ekor: 30 mm, Perlengkapan: dokumentasi / manual, de-to-en-001 Csdpfoxgrd Sjx Aqxegw

Kondisi: perlu perbaikan (bekas), Table dimensions: 2900 x 1200 mm Folded size (without legs): 420 mm Opened size (without legs): 1700 mm without hydraulic power unit! Quantity: 1 piece Cedpoik Hbzefx Aqxsgw Price/item

Kondisi: baik (bekas), Tahun pembuatan: 2020, Frequenzumrichter_Lenze_Profinet Cjdpfxoxn Ia Ss Aqxegw

Kondisi: bekas, tinggi pusat pada poros engkol: 125 mm, diameter benda kerja antara pusat: 1.300 mm, rentang pivot: 9 °, Mesin Gerinda Silindris Kellenberger 51 HU Tinggi pusat: 125 mm Jarak antara pusat: 1200 mm Permukaan meja kerja: 1590 x 140 mm Area penggerindaan: 1300 x 200 mm Gerak memanjang meja, manual dan otomatis: 1300 mm Sudut putar meja: 9° Kepala kerja: Kecepatan, 5 tingkat: 50–400 rpm Putaran: 360° Taper internal: MT5 Tailstock: Taper internal: MT3 Cgjdpfx Ajxpif Ejqxsw Jangkauan gerakan quill: 18 mm Kepala spindle gerinda: Gerak silang: 320 mm Putaran: 360° Kecepatan spindle, 3 tingkat: 2000, 2400, dan 3650 rpm Batu gerinda: 300 x 25 x 127 mm Motor: 3,5 HP Perlengkapan gerinda dalam: Kecepatan spindle: 14.000 rpm Bobot mesin: 1950 kg Silakan minta penawaran berserta transportasi!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Codpfx Aow U Ry Njqxjgw Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.