Beli Miwe 4 Floors bekas (63.964)

Kondisi: baik (bekas), Tahun pembuatan: 2000, Oven kamar Miwe Ideal - Model 600/6R - bekas - tahun pembuatan 2000 - luas 6 m² - kontrol manual - 6 kamar 0,6 x 1,6 m - tudung dengan kipas - burner minyak atau gas - oven produksi - kondisi teknis baik Ljdpfeyzy Eisx Aptehh - harga berdasarkan permintaan

Tahun pembuatan: 2007, Kondisi: baik (bekas), Deck oven MIWE Roll-in - used - Year of manufacture: 2007 - for 60 x 80 cm trays - Computer control - Oil or gas burner - Vent hood with fan - 1 rack - completely overhauled - available from stock or with delivery - with warranty - price on request Lhjdpsir I T Hefx Aptoh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, daya: 2 kW (2,72 hp), lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.000 mm, berat keseluruhan: 1.300 kg, Data teknis: Pembukaan corong: Panjang x lebar 1250 x 1000 mm Lhsdpfxjyma Tio Aptoh Panjang x lebar 1250 x 1000 mm Pembukaan mekanisme pemotong: 562 x 462 mm Pembukaan umpan: 1250 x 1000 mm Panjang x lebar 562 x 462 mm Jumlah poros: 4 buah dengan rincian: poros pemotong 2 buah poros pembersih 2 buah Jumlah cakram pemotong: 23 Kecepatan putar poros: 25 rpm.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 42.000 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.315 kg, panjang total: 3.200 mm, lebar total: 1.630 mm, tinggi total: 1.960 mm, produsen motor: Siemens, daya: 236 kW (320,87 hp), laju aliran volumetrik: 3.013 m³/jam, tekanan kerja: 4 batang, tingkat kebisingan: 77 dB, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, 1 unit low-pressure screw compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: integrated frequency converter Cooling: water cooling with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Lhodpoywr Tkjfx Aptjh Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone afterseparator Manufacturer: BZ Zyklone Type: 175 (material stainless steel) Condensate drain: Bekomat Shell-and-tube heat exchanger Manufacturer: Funke Type: A100 805-6-1Weg Material: stainless steel 2x rubber compensators 1x intermediate flange butterfly valve DN 150 with Auma actuator SG 05.1 F07 1x cooling water control valve Samson 3274 DN 50 PN 16 1x steel pipeline DN 150 with 2x 90° bends

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth Lhsdpfx Aefdkb Tsptjh - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) Lhedpfx Apjd Tbbdsteh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Lhsdpfxed Tqale Aptoh - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Ljdpfx Apjguk A Hstehh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Lsdefdkb Uepfx Aptohh - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Lsdpfjfdkbhex Aptehh Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Lsdsguk Dkjpfx Aptohh Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. Lhodpfjguk Dvex Aptjh When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), 370 UNIT Bekas Oven Miwe Ideal Thermoespresss + sistem pemuatan dan pembongkaran Athlet. Lhodpfxoy Egyne Apteh Perangkat berfungsi dengan baik. PERLENGKAPAN: - 2 oven rak masing-masing 29 m2 (total 58 m2), - sistem pemuatan/pembongkaran Athlet, - boiler pemanas, - dokumentasi. Perangkat siap untuk dilihat di gudang kami (36-068 Bachórz, Polandia). Opsi berbayar yang tersedia: transportasi. Harga yang tertera adalah harga netto untuk satu set. KAMI BERBICARA BAHASA INGGRIS, JERMAN, PERANCIS, RUSIA, UKRAINA.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Four-sided planer/moulder HARBS, 8 heads. Long infeed table, 3 meters. Machine weight: 5,500 kg. Cardan shaft drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Lsdpfx Aol Dw Nxjptehh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: NR: 220.10.029.19, Fungsionalitas: berfungsi sepenuhnya, daya: 15 kW (20,39 hp), tegangan masuk: 400 V, arus masuk: 28 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, edgebander_sales_1 Lodpfx Apoy Dg N Tjtshh

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan 4 unit turbin Schlick - 320 mm, termasuk motor 7,5 kW. Turbin dari - Schlick ROTO-JET RB500 5.2/4/7,5 Tipe turbin - 5.2 Kapasitas abrasif - 140 kg/menit Kecepatan abrasif pada keluaran - 70 m/detik Turbin setelah overhaul total, menggunakan suku cadang asli. Mesin peledakan, blasting, sandblasting. Lodpfx Aevphf Ujptohh HARGA PER UNIT - 3.000 Euro.

Kondisi: baik (bekas), Tahun pembuatan: 2005, panjang total: 4.200 mm, lebar total: 2.500 mm, tinggi total: 1.800 mm, tinggi produk (maks.): 4 mm, berat keseluruhan: 7.000 kg, Cutting capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Lhedpfx Ajtp I S Aopteh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, 684 USED Deck Oven, gas or oil-fired. We have 2 such ovens available. EXTERNAL DIMENSIONS: - width: 255 cm - depth: 350 cm - height: 256 cm Lhedpfxop N D I Hj Aptjh CHAMBER DIMENSIONS: - width: 180 cm - length: 200 cm Gas or oil burner. TECHNICAL DATA: - baking surface: 18 sqm - 5 decks - choice of gas or oil burner - stainless steel housing The machine is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: overhaul / transport / installation / commissioning. The quoted price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, AND UKRAINIAN.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, kapasitas angkut: 9.150 kg, kapasitas muatan per bagian penyimpanan: 3.050 kg, panjang total: 22.800 mm, tinggi total: 3.500 mm, beban per pasangan rangka atap (maks.): 3.000 kg, jumlah baris rak: 4, tinggi rangka: 3.500 mm, lebar rangka: 1.100 mm, tinggi rak: 3.500 mm, panjang rak: 22.800 mm, 4 rak penyimpanan palet dua bidang (M35112711-3) masing-masing panjang 5,7 m, tinggi 3,5 m, kedalaman 1,1 m, masing-masing memiliki 2 bidang, lebar 2,7 m, masing-masing 3 tingkat palang, kapasitas beban per bidang 3000 kg. - 12 rangka (RM3511 - RAL5019) - 24 plat kaki, material bantalan dan baut - 48 angkur lantai (ZZBA1210) - 48 palang tunggal (T2711 - RAL2008) - 4 papan beban maksimum (BSMcP) Lhjdpoyz Iccefx Aptjh Rangka dibaut, tidak dirakit sebelumnya. Pengiriman: - maksimal 20 hari kerja setelah pembayaran diterima - dikirim ke lokasi proyek / pemasangan - pembongkaran dari truk dilakukan oleh pembeli dengan alat angkat sendiri - Pengiriman ke seluruh wilayah Jerman (kecuali pulau)! Pengiriman ke negara EU sesuai perjanjian individu.

Kondisi: baik (bekas), 941 OVEN ROTI BEKAS, oven troli putar, listrik. SPESIFIKASI TEKNIS: - Oven untuk loyang/troli 60/80, - daya 72 kW. DIMENSI EKSTERNAL (dalam cm): - lebar: 173, - panjang: 170, - tinggi: 263. Lodpfxoyxlpbs Aptohh Perangkat siap untuk inspeksi tersedia di gudang kami (36-068 Bachórz, Polandia). Harga yang tertera adalah harga netto. Opsi berbayar tersedia: transportasi. KAMI BERBICARA: INGGRIS, JERMAN, PRANCIS, RUSIA, UKRAINA.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, panjang total: 34.000 mm, beban per pasangan rangka atap (maks.): 3.000 kg, jumlah baris rak: 4, tinggi rangka: 3.500 mm, ruang palet: 108 palet Euro, lebar rangka: 1.100 mm, tinggi rak: 3.500 mm, panjang rak: 8.500 mm, panjang penyangga: 2.700 mm, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. Scope of supply: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, assembly materials - 64 floor anchors (ZZBA1210) Lhsdpfxov Ukz Aj Aptoh - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Free delivery to site/construction location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands). Deliveries to EU member states upon individual agreement.

Kondisi: baik (bekas), 963 USED Deck Oven, Thermal Oil. TECHNICAL DATA: Baking surface area: 12 m² EXTERNAL DIMENSIONS (in cm): - Height: 260 - Width: 175 - Length: 260 + hood 70 We offer units in various technical conditions and at different prices: 1. Directly from the bakery. 2. After inspection with start-up warranty. Lodpfxjvb Ubmo Aptohh 3. After refurbishment with a 6–12 month warranty. A ready-to-view machine is available at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The given price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Kondisi: sangat baik (bekas), • Produsen: ABUS KG – Jerman • Tipe: K-300 1-4 • Daya motor: 3,8 kW • Catu daya: 400 V / 50 Hz • Dilengkapi dengan rem elektromagnetik – torsi pengereman 90 Nm • Poros bergigi – diameter sekitar 34 mm • Pemasangan: flange persegi • Konstruksi industri yang kokoh, didedikasikan untuk digunakan pada crane dan hoist ABUS • Kondisi: bekas, berfungsi (foto asli) Ljdpfexbfutex Aptjhh

Kondisi: baru, de-stangenware-verfuegbar Tragfähigkeit: 240 kg Maximale Plattformhöhe: 4 m Personenzahl: 1 Plattformabmessung: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattform-Ausschub: 0,55 m Lhodpfxjulah Ns Aptsh Traglast Ausschub: 100 kg Hub-/Senkzeit: 34 / 25 Sek. Wendekreis: 0 Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Fahrgeschwindigkeit (ausgefahren): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Nicht-markierende Reifen Automatische Bremsanlage Notabsenksystem Not-Aus-Taster Lasthalteventil Borddiagnosesystem