Beli Planer Dua Sisi bekas (6.343)

Kondisi: hampir baru (bekas), Mesin gerinda empat posisi! Setiap posisi dapat diposisikan secara terpisah. Umumnya digunakan untuk penggerindaan balok dan pahat bubut! Menara bergerak maju mundur secara hidrolik! Mesin yang sangat presisi, sederhana, dan cepat! Dapat dicoba di lokasi! Hsdpfszfyxhox Aa Djnp

Kondisi: bekas, Transnorm belt curve conveyor, left-hand, GKF 90°-780-600 IR600 with dual drive-over RA2019 The Transnorm belt curve is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request. Belt curves are commonly used in intralogistics for in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, extended operating times are not an issue. Conical drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Hnjdpfx Aaek Abufo Dsp Frame width (NB): 780 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° Support legs: optionally available Conveying speed (v m/s): dependent on downstream conveyor, please contact us Drive: no motor included, is driven by the downstream conveyor Scope of delivery: without support legs Optionally available: - Support legs - Side guides All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2008, Transnorm Roller Curve Combination, right and left, 45°-1200-900-800 IR800 1551 mm RA2232 Manufacturer: Transnorm Direction of Travel: Combination curve, right- and left-running Roller Width (RB): 800 mm, tapered, plastic coating Nominal/Outer Width (NB): 900 mm Inside Radius (IR): 800 mm Center Section Length: 1200 mm Offset: 1551 mm Frame Height: 80 mm Overall Height including Motor: 450 mm Drive/Transmission: Chain Electrical Data: 300-500 V, 0.37 kW Gear Motor: SEW, R17DT71D4/TH Conveying Speed: please contact us for details Scope of Delivery: without supports Optionally Available: - Supports - Side guides, single-sided or double-sided Hnodsrixi Tjpfx Aa Dsp - Frequency inverter for variable speed control - Length adjustment (longer/shorter) - Additional roller conveyors/roller curves with chain drive All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Please contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, DATA TEKNIS - Cakram : 2x - Koneksi : 50 Hz 3x400 V - Berat mesin : 3200 [kg] - Jam on power : 94.787 [jam] - Diameter cakram : 700 [mm] Hnedpfsw Ulnhex Aa Dsp - Tinggi cakram : 200 [mm] - Tinggi maksimum benda kerja : 100 [mm]

Kondisi: bekas, DATA TEKNIS - Cakram: 2x - Sambungan: 50 Hz 3x400 V - Berat mesin: 3200 kg - Jam operasi: 99.287 jam - Diameter cakram: 700 mm - Tinggi cakram: 200 mm - Tinggi maksimal benda kerja: 100 mm Hedpfsw Ulnbjx Aa Dsnp AKSESORIS - Sistem hisap: 1 - Tangki pendingin: 1 - Unit hidrolik: 1 - Peralatan: 1 - Wadah penampungan: 1

Kondisi: sangat baik (bekas), 6674 Hsdoza Eccjpfx Aa Denp

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, working width 220 mm working height 120 mm 4 heads spindle diameter 40 mm Hnjdpfx Aoyxlqxsa Dsp stepless feed speed adjustment star/delta starter head adjustment in two axes electric adjustment of the pressure beam spring-loaded feed rollers spindle speed 6000 rpm

Kondisi: bekas, nomor mesin/kendaraan: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and angles can be produced simultaneously on both ends of a solid wood component. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-relieved steel welded construction; large-dimensioned machining units with supports and slides made from cast iron, completely vibration-free. Mechanics are designed for high operational safety and maximum production output. 3 kW milling motors. USER-FRIENDLINESS Short setup times are enabled by the new swiveling system of the machining units, which keeps the tool position constant during swiveling around both the vertical and horizontal axes; in other words, the swivel point always coincides with the tool position. Even when the inclination changes, the shoulder length of the workpieces remains unchanged. Hsdpfxoxrpkme Aa Djnp FLEXIBILITY The NOVA-3 is an exceptionally versatile machining center. Thanks to its large, reliable mechanical components, the advanced design of the machining units, and the innovative swiveling system, it can precisely process short, highly warped workpieces as well as large components with high material removal rates. For the latter, the robust machine structure and the power of the motors are decisive factors. Flexibility is further enhanced by the available infeed magazines; depending on requirements, the machine can be equipped with an ADR or APPC automatic loader. Loading is performed from well-defined reference points. The machined parts are output underneath the machine and can be easily removed by the operator, transferred to a conveyor belt, or placed in a container. No manual intervention is necessary; the operator only needs to keep the magazine loaded.

Kondisi: bekas, Tahun pembuatan: 1980, 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture: 1980. The machine will be available from February 2025. Machine is still in operation. - 6 spindles Hsdpfx Aaevkhcco Donp - Spindle arrangement: bottom – right – left – top – bottom – bottom - Working width: 170 mm (with a tooling diameter of 125 mm) - Working height: 120 mm (with a tooling diameter of 125 mm) - Joinery spindle: 4 HP - All other spindles: 5.5 HP each - Feed motor: 2 or 3 HP - Spindle speed: 6,000 rpm - Working spindle diameter: 40 mm - Smallest cutterhead diameter: 100 mm - Largest cutterhead diameter: 180 mm - Stepless, continuous feed adjustment: 6 – 18 m/min - Feed roller diameter (hardened): 140 mm - Feed roller width: 50 mm - Adjustment range for infeed table and right jointer fence: 10 mm - Adjustment range for vertical spindles below table: 40 mm - Axial adjustment range for horizontal spindles: 30 mm - Planer table length: 2 m Sale on behalf of a customer, ex location Upper Austria, without dismantling, transport, or installation. Errors in description and price excepted. Dismantling, transport, and loading by us optionally available. To avoid misunderstandings, inspection on site by prior arrangement is possible and recommended. Sale as-is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded, applies: “sold as inspected.” Images and videos are examples and do not represent the actual delivery scope. Payment terms: Prices plus statutory VAT, payment before collection or shipment. Delivery terms: ex location.

Kondisi: bekas, Receiver for a four-sided planer or multi-blade saw Hnsdpfx Ajlqxk Aja Djp 5 arms with conveyor chains Adjustable arms Total machine length: 500 cm Total arm length: 220 cm

Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23 Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle arrangement: - Bottom: 5.5 kW - Right - Left: 7.5 kW Hodpfjtxxwdjx Aa Djnp - Top: 11 kW - Bottom: 5.5 kW Material pneumatic hold-downs divided into 4 sections Feed speed adjustable via variator: 4–24 m/min Infeed table length: 1980 mm Drive via cardan shafts Heavy-duty soundproof cabin Machine dimensions: 380 x 226 x 178 cm (H) CE certificate

Kondisi: sangat baik (bekas), Four-Side Planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure rollers divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber outfeed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Work tables manufactured with Marathon Coating technology Hnjdpfx Aajthk T Io Dop CE certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Kondisi: baru, Rak gondola ganda Ohra K60 galvanis, set 5 unit, barang baru 🧰 Fitur produk • Produsen: Ohra • Warna: galvanis • Kondisi: baru Hnodpfszdzm Rjx Aa Dop • Tiang: 5 unit dengan tinggi 3840 mm (IPE 200) • Kaki: 5 unit kaki ganda (IPE 200) • Lengan: 30 unit dengan panjang lengan 1200 mm • Pengaman: 60 unit pen pengaman • Pemasangan: 20 unit angkur beton Hilti • Beban maksimum: 2.500 kg per tiang dan per sisi • Kapasitas angkat: 830 kg per lengan • Jarak bingkai: 1500 mm 💰 Harga €5.650,- belum termasuk PPN • Diskon kuantitas: atas permintaan • Biaya pengiriman: seluruh Eropa atas permintaan • Waktu pengiriman: tersedia segera • Kunjungan dan pengambilan: sewaktu-waktu dengan janji Selalu lebih dari 5000 meter lari rak palet dari berbagai produsen tersedia di stok (Perubahan dan kesalahan pada data teknis, informasi, dan harga serta penjualan sementara dapat terjadi! Lihat S&K kami, semua harga belum termasuk PPN ex stock.)

Kondisi: bekas, Tahun pembuatan: 2001, w23-unimat-6sp Hsdpfxsy Uy Uqe Aa Djnp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, Mesin serut empat sisi SCM SUPERSET XL Tahun produksi: 2007 Mesin hanya digunakan selama 50 jam, kondisinya praktis seperti baru. Spesifikasi teknis: • Lebar kerja hingga 240 mm • Tinggi kerja hingga 120 mm • Kecepatan putar spindle: 6000 rpm Hnedpoyhhx Njfx Aa Djp • Pengaturan kecepatan feeding variabel: 5-25 m/menit • Susunan spindle (5 spindle): - bawah 7,5 kW - kanan 7,5 kW - kiri 7,5 kW - atas 7,5 kW - bawah 7,5 kW • Semua spindle perkakas dilengkapi motor independen Mesin memiliki 2 spindle vertikal (no. 2 dan 3) dengan konektor cepat HSK85S.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edge Banding: min/max 14-65 mm Thickness: min 0.3 mm Max ABS size: 3 x 35 mm Panel thickness: min/max 60 mm Panel size: 220-3200 mm Working edge: 30-75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units included: 1+1 Pre-milling units, 4 kW, pneumatic 1+1 Air blast unit for cleaning workpieces 1+1 Gluing station / hot-melt adhesive unit GR_HMP-P HM-P EDGE GLUING DEVICE FOR STRAIGHT EDGES Designed for bonding straight panel edges using a hot-melt adhesive with removable tank Tank and pre-melter for rapid melting The unit includes: A Adhesive tank B Strip holding table C Pneumatic equipment box D Support base for strip storage E Guillotine shear F Side pressure unit G Glue unit inclination adjustment H Mobile tabletop 1+1 Edge strip feeder, 5-station 1+1 End trimming unit 0.35 kW, 12,000 rpm 1+1 Corner copying unit, 1 kW, 12,000 rpm 1+1 Chamfering unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 Edge rounding unit with two 0.35 kW motors Hnedjtrgy Nspfx Aa Dop 1+1 Trimming unit, 4 kW, right side, left side empty (U28+U55), diameter 125 mm, 12,000 rpm 1+1 Self-adjusting scraper RCA 95 1+1 Brush/buffing unit 0.29 kW, 1,500 rpm SPO (150/50 x 50 mm) 1+1 ABS strip color brightener, 1,600 W

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, MBW623B Four-Sided Planer Maximum workpiece width: 230 mm Maximum workpiece height: 150 mm 6 spindles: 1) Bottom horizontal 230 mm – 5.5 kW 2) Right vertical 150 mm – 7.5 kW Hnjdpfx Aev R Nl Eea Dop 3) Left vertical 150 mm – 7.5 kW 4) Top horizontal 230 mm – 7.5 kW 5) Bottom horizontal 230 mm – 5.5 kW 6) Universal 230 mm, adjustable 360° – 7.5 kW All spindles adjustable up/down, left/right Spindle diameter: 40 mm Feed over Cardan shafts Pneumatically pressed feed rollers Infinitely variable feed speed adjustment via frequency inverter Feed motor: 5.5 kW Electric thickness adjustment Feed rollers integrated in the table

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 Hedjfivhfspfx Aa Denp - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport cost within Germany (excluding islands): €550 (net)! Hnedsfivhgjpfx Aa Dep You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Hnedpfx Aaeddmq Te Dsp Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. Hnsdpjddmtcjfx Aa Dop In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Hodpfxjddmtqo Aa Denp Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Hedpfeddmqyex Aa Djnp Price ex works incl. loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side Hsdpfeddmr Nex Aa Djnp - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Kondisi: bekas, Mesin Gerinda dan Poles Dua Sisi MEYER Tipe SMP No. Mesin: 848 Tahun pembuatan: 1963 Diameter maksimum roda gerinda/poles: 800 mm Diameter poros: 50 mm Pemasangan roda gerinda Ø: 305 mm Jarak antar roda: 1470 mm Tinggi kerja: 550 mm Kecepatan putar: 710 / 800 / 950 rpm Daya motor: 2x 3 kW Sambungan listrik: 380 Volt, 50 Hz - Dua motor penggerak, masing-masing untuk satu sisi kerja - Sakelar bintang-segitiga untuk setiap motor penggerak terpisah - Perubahan kecepatan melalui pengalihan sabuk penggerak - Flensa hisap debu Ø 100 mm - Terpasang 2 buah roda gerinda korund lebar 40 mm, Ø sekitar 560 / 480 mm Dimensi (PxLxT): 1700 x 1200 x 900 mm Berat: 850 kg Kondisi baik Hsdpodzqmhsfx Aa Donp