Beli Romer/ Electrostatic Painting Curing Oven Sl Series bekas (9.972)

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Nledpefzciqefx Aa Ueb Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel Nledpfofzrapsx Aa Ujb • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology Nedpfx Aefz A D Noa Uolb User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option. Nlsdpfxofz A H Dj Aa Usb

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are characterized by quiet operation. They are suitable for both simple, widely used and complex multidimensional processes. Programming is done via PLC control. They can handle both long and short strokes. The toothed belt drive ensures quiet operation. Maintenance-free AC motor. Slim column design for space savings. The robust construction of the manipulators provides extensive capabilities and high stability. The manipulator is equipped with a 7'' touch panel or can be externally controlled via the ModBus protocol with RJ45 cables. Nsdpfx Asfz Dmfoa Ujlb

Tahun pembuatan: 2020, Kondisi: baru, en-GB: • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per shot • 50 l waste container capacity Description • Dust collector with efficient radial impeller • Two operating modes – full power and ECO • Base weight of filter material up to 260 g/m² • High suction power with low energy consumption • Waste container for easy removal of paint residues Nledpfx Ajfz Dqmoa Uob • Inspection door for filter replacement • Each filter equipped with its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, • Electric data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m3/h Njdpfxjfz Dq As Aa Uelb • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m2 • Automatic filter cleaning • Air consumption: max. 12L at 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes - Full Power and ECO • The basic weight of the filter material used is up to 260 g/m2 • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, en-GB Nlsdpfx Aasfz Dtts Ueb

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Njdpofz I Npjfx Aa Uolb The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called half-demineralised water station is produced from the demineralised water plant using ion exchange technology. The station consists of 3 columns: Nodsfz I Srjpfx Aa Uslb - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter. Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). Nsdpjfz Nb Tjfx Aa Uslb - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel The large color touchscreen panel is aesthetically pleasing and offers comfortable, intuitive operation. You can configure all essential parameters directly on it. Storage for 20 Programs with 10 Events Each It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is particularly required for more demanding processes. Gas/Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of a specific cycle, plan consumption, and monitor staff. Dual-channel Recorder with USB Cycle Parameters Every furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—just like a flight data recorder—onto a USB stick. Nljdpsfz U Hvofx Aa Usb

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air Njdpfefz U Swsx Aa Uelb • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Nlodpjfz U S Ejfx Aa Uob Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baik (bekas), stre-01 Nlsdpfx Asyuqt Noa Ujb

Kondisi: bekas, We offer used pallet racking systems for sale. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue Uprights are pre-assembled (bolted lattice structure) Beam width: 2,830 mm (clear width) Nsdey Dgdqjpfx Aa Uslb Beam type: RTS Box profile: 110 x 50 mm Colour: orange Shelf load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 uprights + 10 beams) Extension bay: €382.55 net (1 upright + 10 beams) VOLUME PRICES Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay 51+ units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay 51+ units: €336.64 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is quoted per unit/net price or as described in the listing (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used warehouse logistics products, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. We continually offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us.

Kondisi: bekas, We are offering used pallet racking systems here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustable pitch: 70/70 mm Colour: blue The frames are pre-assembled (bolted truss design) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Njdpfx Aey Dgdwja Uolb Colour: orange Bay load: 3,000 kg per beam pair PRICES Starter bay: €595.10 net (2 frames + 10 beams) Add-on bay: €382.55 net (1 frame + 10 beams) VOLUME DISCOUNTS Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Add-on bay 1 - 5 units: €382.55 net Add-on bay 6 - 20 units: €367.25 net Add-on bay 21 - 50 units: €351.95 net Add-on bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customised quotation based on your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price is given per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US The company DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveying technology, mezzanine floors, textile storage as well as machines for trade, industry and skilled crafts. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Kondisi: bekas, We are offering used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Nodsy Dgcyjpfx Aa Ujlb Adjustable increments: 70/70 mm Colour: blue The uprights are pre-assembled (bolted latticework) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Shelf load: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) BULK PRICING Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We would be pleased to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is per unit/net price or as specified in the description text (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We continuously offer you attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Alle unsere Produkte werden mit Sorgfalt hergestellt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS* Nlodpfxoy H Aizj Aa Ueb • Modell: FABO HY-600 • Typ: Doppelwendel-Schneckenwäscher • Kapazität: 60 Tonnen pro Stunde • Abmessungen: 1400 x 6650 x 1800 mm • Schneckengröße: Ø 600 x 6000 mm • Drehzahl: 22 U/min • Motor: 2 x 5,5 kW Schwerlast-Gamak • Wasserverbrauch: 55–205 m³ • Inklusive Fahrgestell, Motor und Schutzabdeckungen. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Kondisi: bekas, machineseeker_dibas_64s_64l_es Nljdpfx Aaoy Avpmj Usb

Kondisi: hampir baru (bekas), Mondial Forni Stonefloor oven 120x150, bouwjaar 2016, slechts enkele keren gebruikt Nlodpfx Ajwf Ix Ssa Uob

Kondisi: sangat baik (bekas), J4 Tunnelofen aus dem Jahr 2012, demontiert und versandbereit. Für weitere Informationen senden Sie bitte eine E-Mail. Nlodpfxow Elytj Aa Ueb

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum temperature: 700°C Opening (WxH): 1,500 x 30 mm Country of origin: Netherlands Electrical power: 14 kW Nedpfx Aaswi Ry He Uslb Machine dimensions (LxWxH): 2,000 x 1,000 x 1,700 mm Machine weight: 1,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 2.500 mm, tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, ROMER Absolute Arm adalah alat pengukur koordinat 3D dengan beberapa sendi. Alat ini terbuat dari serat karbon berkualitas tinggi yang stabil terhadap suhu. Ini adalah lengan ukur 7-sumbu dengan volume pengukuran 2500 mm. Njdpfoxyw Rdsx Aa Uelb Kami juga dapat menawarkan perangkat lunak dan pelatihan sesuai permintaan. Sertifikasi ulang terakhir dilakukan tahun 2024. Sertifikasi terkini tersedia dengan biaya tambahan.

Kondisi: baik (bekas), Händi P3 terdiri dari 78 tiang galvanis (480 cm x 105 cm) dan 253 balok abu-abu (270 cm x 10 cm). Dari jumlah tersebut, 11 tiang mengalami kerusakan ringan. Robering SLP SL terdiri dari 53 tiang (400 dan 450 cm x 110 cm) dan 266 balok oranye (270 cm x 11 cm). Dijual hanya secara paket lengkap. Nlsdpfx Aaoywd Rns Usb