Beli Tnm Mesin Bubut Tengah bekas (78.607)

Kondisi: siap digunakan (bekas), Lathe, manufacturer Takisawa, model TAL 510, equipped with chuck, quick-change tool post, and live center. Hedpfx Ajvyuuqoqvjfl

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm Hsdewrm Dtspfx Aqvofl >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, diameter pembubutan di atas alas geser: 710 mm, panjang pembubutan: 8.000 mm, Used heavy-duty lathe with comprehensive steady rest equipment – Ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm has been specially designed for pipe machining applications. Thanks to its well-thought-out machine concept, the cutting tool can easily pass by the open steady rests – perfect for precise processing of long, hollow workpieces. Technical highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Centre height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency inverter, steplessly adjustable Design advantages: • One-piece cast machine bed, artificially aged – for maximum stability and stress relief • 5 hardened and ground guideways for highest precision • Stepless feed adjustment of the longitudinal axis via ballscrew – no Norton or apron gearbox • Electrically operated tailstock with hydraulic clamping • Manually adjustable cross slide with trapezoidal leadscrew Hfedpfxsv Tntte Aqvel • 4-position tool post, manually rotatable • Triple guided compound slide – for exceptionally smooth operation Steady rests & pipe machining: • Various steady rests (fixed and travelling) optionally available • Motor-driven steady rest carriers with hydraulic clamping • Quill adjustment conveniently accessible from the operator side • Travelling steady rests mountable on the left or right as required Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise processing of pipes. The stepless speed and feed regulation provide high flexibility and user comfort.

Kondisi: baru, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Centre Distance: 3000 mm Centre Height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Quill diameter: 90 mm Hedpfx Aqjxxayfevofl Quill travel: 235 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L x W x H): 4630 x 1200 x 1520 mm Weight approx.: 3300 kg Features • Versatile applications in general engineering, production, single-part manufacturing, ... • Central, user-friendly control for feeds and threading via leadscrew and feedscrew • Prismatic bed made from grey cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse longitudinal and cross as standard, reducing non-productive times • Large spindle bore (105 mm) for workpieces with large diameters • Smooth start via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times • Excellent machining performance even during facing operations • Bed reinforced with heavy ribs to stiffen guidance and minimise vibration effects Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Safety clutch • Rapid traverse for longitudinal and cross feed • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Faceplate 450 mm • Fixed steady rest – max. workpiece diameter 180 mm • Travelling steady rest – max. workpiece diameter 120 mm • 2 centre points • Motor with magnetic brake according to CE standard • Foot pedal with braking function (CE compliant) • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Change gears • Reducing sleeve • Chip guard at rear • Cable routing via energy chain • Operating tools

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LZ280/3, diameter putar di atas sled silang: 190 mm, lubang spindel: 43 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 670 mm, gores kuas bulu: 90 mm, diameter quill: 45 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful geared-head lathe with a continuously variable spindle speed range from 30 to 4,000 rpm. The standard paint finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Features & Accessories: ✅ 3-axis position display with 6'' color screen ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine lamp & K32 collet board ✅ Electromechanical end-stop system for threading/feeds ✅ Tool cabinet with telescopic pull-outs including operating tools Additional equipment package (optional): Hfjdsv Dan Depfx Aqvel ➕ 3-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3–16 mm, B16/MK3) ➕ Live center MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport incl. insurance Perfect for precise and demanding turning applications in industry and workshops! 🚀

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Hedpfevtp Edox Aqvofl

Kondisi: bekas, Tahun pembuatan: 1998, lathe-data-001 Hfodpfx Aqjxp Rzbjvsl

Kondisi: baik (bekas), Tahun pembuatan: 1967, WEIPERT Centre Lathe Type: UD 500 e, Year of manufacture: 1967 Equipped with digital readout, compound slide feed, MULTIFIX toolholder size C, Forkardt chuck 315 mm. Centre height: 250 mm Centre distance: 1500 mm Hsdpou Rd H Iofx Aqvjfl Spindle bore: 65 mm Spindle speeds: 14 - 1400 rpm The machine is in good condition.

Kondisi: baru, berat keseluruhan: 1.970 kg, tinggi total: 1.700 mm, lebar total: 1.080 mm, panjang total: 2.700 mm, Centre distance: 1500 mm Max. swing over bed: 460 mm Max. swing over cross slide: 270 mm Max. swing gap: 690 mm Spindle bore: 80 mm Spindle nose: Camlock D1-6 Spindle speed range: 25 – 1700 rpm Cross slide travel: 290 mm Top slide travel: 120 mm Hodpszdr H Uefx Aqvefl If you have any questions regarding the machine or wish to arrange a viewing appointment, please feel free to contact us by phone or email. Feel free to have a look at our other listings to get a complete overview of our stock.

Kondisi: baik (bekas), Tahun pembuatan: 1962, Mesin bubut LZ pabrikan VDF HEIDENREICH & HARBECK, tipe 24 RO, tahun 1962, direkondisi tahun 1992. Dilengkapi indikator digital Heidenhain 3-sumbu, chuck Forkardt 250 mm, dudukan alat Multifix B. Hedpfx Ajxziuwsqvjfl Tinggi puncak: 255 mm Diameter putar di atas alas: 510 mm Diameter putar di atas support: 270 mm Jarak antara puncak: 1000 mm Lubang spindle: 55 mm Kecepatan spindle: 20 - 900 rpm Daya motor: 6,5 kW Mesin dalam kondisi baik, diagram kelistrikan tersedia. Kebutuhan ruang: Panjang 3 m, Kedalaman 1,2 m, Tinggi 1,3 m, Berat ±1800 kg.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Hfsdovivmyopfx Aqvjl Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: diremaj di bengkel (bekas), Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 250 S Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey Machine no.: 069 Hfsdepz Hubjpfx Aqvol Centre height: 125 mm Centre distance: 500 mm with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital readout ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool post, base body Size A - Bed stop - Coolant system - Chuck guard, electrically interlocked - Chip guard/rear splash guard - Operating manual - used, sold as inspected -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out in particular due to its stepless speed control, which makes working on the already highly user-friendly machine even easier. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine and its condition at our premises. Availability: on request Machine no.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Hodpfxoq H D U Ej Aqvefl Spindle speed: 20-3000 rpm, stepless Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Threading options: Metric, Inch, Module, Diametral Pitch Metric thread pitch: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can carry out a complete or partial overhaul of your chosen machine - Upon request, we repaint your machine in your desired colour - Upon request, you can directly order further accessories such as tools, etc. - Upon request, we can fit additional accessories such as safety features, etc. - We are happy to take care of shipping and/or installation.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: X188C001, Mesin bubut siklik WAGNER / CHEVALIER FCL - 1840 S Ketentuan pengiriman: Bebas ongkos, dimuat ke truk Lokasi: 74906 Bad Rappenau Pengambilan: Pengambilan mesin akan dilakukan pada tanggal 07.10.2026. Waktu pengambilan yang tepat akan disepakati sebelumnya. Ketentuan pembayaran: Pembayaran di muka – melalui transfer bank Data teknis: Lebar alas: 356 mm Diameter bubut di atas alas: 460 mm Diameter bubut di atas rumah geser: 230 mm Tinggi tengah: 230 mm Jarak antara sentra: 1.000 mm Kecepatan spindel: 40 – 2.000 RPM Tingkat kecepatan spindel: 3 tingkat Kecepatan spindel rendah: L: 40 – 200 RPM Lubang spindel: 58 mm Kerucut pada spindel: MK6 Jarak perjalanan sumbu Z: 900 mm Jarak perjalanan sumbu X: 250 mm Jarak perjalanan rumah atas: 152,4 mm Jalur rumah atas: 125 mm Ukuran penjepit alat: 25 x 25 mm Ekor berputar: Diameter: 65 mm Jarak perjalanan: 150 mm Pemasangan kerucut: MK4 Umpan & Akurasi: Umpan: 0 – 5.000 mm/menit Kecepatan cepat sumbu X/Z: 5.000 mm/menit Akurasi pemosisian: ±0,01 mm Akurasi repetisi: ±0,005 mm Putaran spindel: 0,007 mm Lingkup pengiriman: Buku panduan yang ada sesuai gambar Cakar tiga Lemari laci beserta isinya Aksesori yang ada sesuai gambar Dimensi & Berat: Dimensi pemasangan P x L x T kira-kira: 2900 x 1700 x 1900 mm Berat kira-kira: 2300 kg Jika ada pertanyaan atau permintaan untuk melihat mesin, jangan ragu untuk menghubungi kami! Informasi tambahan: ►Jika diinginkan, kami dapat menawarkan pengiriman ke lokasi tujuan. ►Harga yang ditawarkan adalah harga bersih ditambah PPN. ►Barang dijual tanpa jaminan apa pun. ►Data teknis tanpa jaminan. ►Penjualan dapat dilakukan sewaktu-waktu. Hfodjzx S I Iepfx Aqvel ❗Penjualan barang hanya ditujukan untuk perusahaan!❗

Kondisi: baru, berat keseluruhan: 1.720 kg, tinggi total: 1.700 mm, lebar total: 1.080 mm, panjang total: 2.200 mm, Centre distance 1000 mm Max. swing over bed 460 mm Hedozdr Huopfx Aqvefl Max. swing over cross slide 270 mm Max. swing distance 690 mm Spindle bore 80 mm Spindle mount Camlock D1-6 Spindle speed 25 - 1700 rpm Cross slide travel 290 mm Top slide travel 120 mm If you have any questions about the machine or would like to arrange a viewing, please feel free to contact us by phone or email. Also, take a look at our other listings for a complete overview of our inventory.

Kondisi: baru, berat keseluruhan: 1.775 kg, tinggi total: 1.320 mm, lebar total: 850 mm, panjang total: 2.450 mm, Centre distance 1500 mm Max. swing over bed 410 mm Max. swing over cross slide 255 mm Max. swing distance 580 mm Spindle bore 52 mm Hodpfx Ajzdr E Deqvjfl Spindle mount Camlock D1-6 Spindle speed range 1: 30 - 550 rpm Spindle speed range 2: 550 - 3000 rpm Cross slide travel 225 mm Top slide travel 100 mm If you have any questions about the machine or wish to arrange a viewing appointment, please do not hesitate to contact us by phone or email. Please also browse our other listings for a complete overview of our current stock.

Kondisi: baru, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Center distance: 1500 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12): 25 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features Hfsdpfxjxl Dyvo Aqvel • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, user-friendly gearshift for feeds and threads with leadscrew and feed rod • Gears are oversized, hardened, and precision-ground • Simple, smooth, and precise speed and feed selection • Rapid traverse in longitudinal and cross directions standard to reduce non-productive times • Machine bed cast in one piece, extremely torsion-resistant and low vibration, ensuring the prerequisites for precise turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. clearance diameter 150 mm • Follow rest – max. clearance diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with electromagnetic brake according to CE standard • Foot pedal with braking function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centers • Reducing sleeve • Thread chasing dial • LED machine lamp • Chip guard • Operator tools

Kondisi: baru, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications Centre Distance: 2000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range (12): 25 – 1700 rpm Longitudinal Feed Range (42): 0.055 – 3.065 mm/rev Cross Feed Range (42): 0.025 – 1.386 mm/rev Metric Threads (41): 0.1 – 14 mm Imperial Threads (60): 2 – 112 TPI Tailstock Quill Diameter: 60 mm Tailstock Quill Travel: 130 mm Tailstock Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (L x W x H): 3250 x 1080 x 1600 mm Weight: approx. 1995 kg Features • Modern main spindle bearing with precision angular ball bearings • Hardened and ground gears and shafts, including feed gear • Central, user-friendly feed and thread selection with leadscrew and feed rod • Large-dimensioned, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment • Standard rapid traverse (longitudinal and cross) to reduce non-productive times • One-piece, cast machine bed offers extreme torsional rigidity and low vibration, ensuring superior turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake (CE-compliant) • Foot pedal with brake (CE-compliant) • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • 2 centers • Reduction sleeve • Thread dial indicator Hfjdpfoxl Dzasx Aqvol • LED machine lamp • Chip guard • Operating tools

Kondisi: baru, en Hfjdoxl Tcaspfx Aqvsl

Kondisi: baru, berat keseluruhan: 1.150 kg, tinggi total: 1.320 mm, lebar total: 850 mm, panjang total: 1.940 mm, centre distance 1000 mm max. swing over bed 410 mm max. swing over cross slide 255 mm max. swing distance 580 mm spindle bore 52 mm spindle mount Camlock D1-6 spindle speed range 1: 30 - 550 rpm spindle speed range 2: 550 - 3000 rpm cross slide travel 225 mm top slide travel 100 mm Hfodpfxjzdr Ewo Aqvel If you have any questions about the machine or would like to arrange a viewing appointment, please feel free to contact us by phone or email. Feel free to check our other listings to get a complete overview of our stock.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Centre height: 250 mm Centre distance: 2000 mm Hfodpfjv Dhzfjx Aqvel Swing diameter over bed: 500 mm Spindle bore: 50.8 mm Spindle mount: Size 6 Tailstock taper: 5 MT Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/cross 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Kondisi: baru, Tahun pembuatan: 2024, Harga promosi €42.500,- (sebelumnya €48.500,-), belum termasuk PPN. Tersedia segera! Perlengkapan premium yang disertakan: - Tampilan posisi 3 sumbu Heidenhain ND5023 - Penghenti longitudinal 5 posisi untuk eretan Hfedpfx Aqspq R Rdevol - Pemegang penggantian cepat SRW-Amestra Multifix C dengan 4 sisipan - Lampu kerja LED - Satu set bantalan perata dari Spinelli Perlengkapan standar: - Kopling mekanis ganda - Rem elektromagnetik - Kecepatan cepat - Perangkat udara pada penopang, untuk memudahkan pergeseran di sepanjang meja - Meja, kaki, rumah spindel, penopang, dan eretan terbuat dari besi cor - Panduan meja diperkeras secara induktif dan digiling - Rumah spindel dengan roda gigi yang diperkeras dan digiling secara induktif - Spindel dipasang pada bantalan presisi tinggi - Pergerakan eretan yang lancar - Sistem kelistrikan di dalam lemari kedap udara dengan komponen dari Siemens dan/atau Schneider - Selongsong reduksi spindel - 2 titik mati - Pelindung chuck dengan sakelar mikro, pelindung revolber dari akrilik, pelindung belakang di sepanjang panjang mesin, pelindung spindel utama dan batang umpan, tombol berhenti darurat - Tangki serpihan dengan roda - Sistem pendingin dengan pompa listrik - Pelumasan terpusat pada jalur panduan dengan pompa otomatis - Penopang tetap dan bergerak - Peralatan servis dan kunci pas, sertifikat pengujian, diagram kelistrikan, buku operasi dan perawatan - Mesin dibangun sesuai dengan standar EG Perlengkapan opsional: - Chuck 3 / 4 rahang Data teknis - Tinggi antara titik: 260 mm - Diameter ayun di atas meja: 520 mm - Diameter ayun di atas eretan: 300 mm - Diameter ayun tanpa kepala: 690 mm - Jarak antara titik: 1500 mm - Lebar meja: 400 mm - Lubang spindel: 105 mm - Hidung spindel: 11" Camlock - Tingkat kecepatan spindel: 12 - Kecepatan spindel: 16 - 1200 rpm - Daya motor utama (S1 - 100%): 7,5 kW (opsional 9,2 kW) - Umpan longitudinal: (93) 0,028 - 6,43 / (65) 0,063 - 2,52 mm/putaran - Umpan melintang: (93) 0,012 - 2,73 / (65) 0,027 - 1,07 mm/putaran - Ulir metrik: (54) 0,5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Ulir modul: (54) 0,5 - 112 / (18) 0,5 - 7 mm - Pembagian diametral: (54) 1/4 - 64 / (24) 4 - 56 dp - Langkah eretan melintang: 340 mm - Langkah eretan atas: 150 mm - Diameter spindel penopang: 85 mm - Langkah spindel penopang: 200 mm - Penerima spindel penopang: MK5 - Berat total: 3200 kg

Kondisi: baru, en-001 Hfodetznarepfx Aqvsl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Year of manufacture: 2010 Hedpfxew Ecuue Aqvjfl Swing diameter: 630 mm Swing diameter over cross slide: 370 mm Turning length: 2,000 mm

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Panjang benda kerja: 700-2400mm, diameter benda kerja: 50-200mm, daya penggerak spindel utama: 2x 37kW, diameter lubang maksimum chuck: 210mm, langkah piston chuck: 25mm, langkah chuck per rahang: 11,1mm, gaya pengoperasian chuck maksimum: 52,5kN, tekanan pengoperasian chuck maksimum: 30bar, kecepatan putar chuck maksimum: 2000/menit, jangkauan perangkat pemuatan dan pembongkaran: 2600mm, jarak perjalanan kepala tengah: 1200mm, langkah kepala tengah: 1200mm, sekering utama: 315A, daya sambungan: 150kW, panjang total: sekitar 10.640mm, panjang area utama: 6800mm, lebar: 2370mm, tinggi: 2860mm, tinggi total termasuk rangka: 3450mm, jam operasi: 3143 jam. Dilengkapi dengan konveyor serpihan, perangkat pemuatan dan pembongkaran, kepala tengah tetap, kepala tengah yang dapat digerakkan, panel kontrol, pembersih udara ILT, lemari listrik, lemari hidrolik, tangki pendingin untuk pendinginan motor, dan tangki pendingin untuk pendinginan alat serta dokumentasi. Telah diperbaiki sebagian oleh produsen pada tahun 2021. Inspeksi di lokasi dimungkinkan. Hfodpfsztdt Ejx Aqvjl