Beli We Print Solutions Gmbh Ps4060 bekas (83.818)

Kondisi: bekas, Tahun pembuatan: 1991, Consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reducing station - Control cabinet with operator panel Machine (addition): Juice heating plant for pasteurisation Capacity: 100 hl/h Perm. operating overpressure PHE: 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Codpfx Aevcqy Usg Derb Width: 2 m Height: 2.4 m Operation/control: Control cabinet with operation buttons Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; plate heat exchanger; shell-and-tube heat exchanger; 2 x product pumps; measuring, sensor and control technology; various valves and other fittings.

Kondisi: bekas, Tahun pembuatan: 1985, drucktankkeller-207hl-edelstahldrucktank-3stueck Crodpfx Asw Tmqnsg Dsb

Tahun pembuatan: 2003, Kondisi: bekas, Mesin (tambahan): Tangki lumpur baja tahan karat Kapasitas total hingga tepi atas silinder: 300 hl Luas dasar sekitar: 15 m² Beban dasar: 165 kg/m² Tinggi dinding silinder: 2 m Bahan: baja tahan karat Fasilitas: koneksi pipa uap, lubang masuk (DN600), kaca intip (DN600), lampu peringatan CIP, sakelar pengaman pintu, perlengkapan penerangan dalam (IP54) Crodpfxsxbn E Ij Ag Djb

Kondisi: baru, Bee GTE-88/090/-08-V17-F katup bola pneumatik, tegangan kumparan 24V DC, belum pernah digunakan, 100% berfungsi, kelengkapan sesuai foto. Crodpfxoi D T Iye Ag Djb

Tahun pembuatan: 2013, Kondisi: bekas, Merek: PAUL VON DER BANK GMBH, Tipe: Sistem Las Robot, Tahun Pembuatan: 2013, No. Seri: 13.536, Sumber las, pembuat: Fronius, tipe: CM TransPuls Synergic 4000, unit pendingin, unit las VR7000CMT, terminal pemrograman RCU5000I, meja putar, robot las, pembuat: KUKA, tipe: KR5-2ARC, kontrol robot KRC4, sistem ekstraksi asap, pembuat: Plymovent – unit belum terhubung. Crodpfx Ageyx Exve Djb

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 400 mm, tinggi total: 690 mm, panjang total: 600 mm, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, kebutuhan tinggi: 900 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The LAS 22 is a compact tabletop unit with a small working area, making it ideal for small components or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The unit is very easy to operate and requires no programming knowledge. With its powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos with just a few clicks—all without extensive programming skills. The software can automatically increment serial and article numbers after prior configuration. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a hand scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) Crjdpfxjy I Nbmj Ag Djb - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Kondisi: baru, Tahun pembuatan: 2024, MESIN BARU belum pernah digunakan!!! DN SOLUTIONS PUMA 5100LMB Tahun produksi: 2024 Poros C, alat penggerak Kontrol FANUC OiF touch Chuck 21 inci (535 mm) Lubang spindle 166 mm Lintasan: X - 362 mm Z - 2.155 mm Panjang pembubutan maksimum: 2.002 mm Crodpfx Agoy H D Ufj Deb Diameter pembubutan maksimum: 650 mm Revolver 12 posisi BMT 75 Conveyor serbuk Knoll

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, pergeseran cepat sumbu Y: 20 m/menit, kecepatan spindel (maks.): 60.000 rpm, diameter pemasangan: 3 mm, lebar total: 800 mm, jenis arus masuk: AC (pendingin udara), panjang meja: 320 mm, tinggi meja: 560 mm, masa garansi: 12 bulan, lebar kerja: 560 mm, suhu lingkungan (min.): 18 °C, suhu lingkungan (maks.): 30 °C, sambungan udara terkompresi: 6 batang, panjang kerja: 320 mm, jumlah sumbu: 3, The compact benchtop version LOW MINI was specially developed for depaneling small-format production runs, small series in large formats, and cost-conscious manufacturing. PCB materials with residual web connections can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. The highlight of the machine is the easy and straightforward switch between small (320x280mm) and large (320x560mm) working areas. • Short cycle time due to shuttle operation • X-/Y-axes with linear motor technology • Panel fixation using pin technique • Flexible handling • PCBs with residual web connections • Milling spindle adjustment via servo technology • Extraction device • Easy operation • Optimal price-performance ratio Manual depaneling – flexible and cost-effective The manual depaneling concept offers tremendous advantages in terms of flexibility and cost. Medium production volumes can be depaneled quickly and with low dust using the LOW MINI. Dual loading with linear motor technology is standard; single shuttle operation is possible to increase the working area. Low maintenance requirements and user-friendly operation, combined with an excellent price-performance ratio, ensure easy operation and make investment in this depaneling machine economically worthwhile. Axis speed: 160mm/s Cjdpfjxmfdxsx Ag Dorb Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tool: 0.8 – 2.4mm

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 45 kg, panjang total: 350 mm, lebar total: 605 mm, tinggi total: 1.080 mm, tegangan masuk: 230 V, daya laser: 20 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 70 mm, lebar area pemindaian: 70 mm, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The mobile LAS 23 portable laser stands out for its compact design. Small, handy, and equipped with custom-made attachments that can be easily exchanged using a quick-change system. Thanks to its mobile frame, the unit can be driven directly to the workpieces that need to be marked. This makes it suitable for both large and heavy, as well as small workpieces. Cedpfxeu Smcbj Ag Dorb The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—even without extensive programming knowledge. The software can automatically increment serial and item numbers once preset. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser Class 1 • CE compliant, according to EU directives • Wavelength: 1064nm • Marking area: 70x70mm (optional: 110x110mm) • Signal light to indicate operating status (on the handheld unit) • Marking software: EZCAD • Connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Kondisi: siap digunakan (bekas), Konveyor Serbuk Logam, Konveyor Ulir, Konveyor Ulir Ganda, Mesin Bekas Pabrikan: Ventilatorenfabrik Oelde GmbH Dimensi keseluruhan: Lebar: 9460 mm Kedalaman: 1340 mm Tinggi: 2300 mm Dimensi palung: 8830 × 900 × 340 mm Bukaan masuk: 1230 × 1200 mm Cedpfey H I Uiox Ag Dsrb Bukaan keluar: 730 × 535 mm Data kelistrikan: 400 V Sistem konveyor ulir ganda.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302 by Trumpf Cooling unit P805-17640 by Termotek Material: mild steel sheet and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Tube diameter: 80 - 600 mm Tube length: 100 - 1250 mm Crodpfjv Ipcfex Ag Deb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, We are offering a used rotary indexing table manufactured by Weiss. The rotary table has an approximate load capacity of 30 tons, a diameter of around 3.5 meters, and a net weight including motor of about 6,500 kg. The control system for the rotary table is also available, featuring an SEW frequency inverter, braking resistor, and more. All documentation is included. Crsdpfoni Awpjx Ag Dob

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, berat keseluruhan: 150 kg, tinggi total: 2.300 mm, panjang total: 1.200 mm, lebar total: 600 mm, model controller: SPS-Steuerung, lebar kerja: 300 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, jumlah laci: 1, akurasi pemposisian: 1 mm, tinggi kerja: 30 mm, panjang kerja: 400 mm, jangkauan kerja: 400 mm, Perlengkapan: Penandaan CE, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany Crsdpfxjyx Hgbo Ag Djb • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 120 kg, panjang total: 900 mm, lebar total: 1.500 mm, tinggi total: 2.050 mm, tegangan masuk: 230 V, daya laser: 30 W, panjang gelombang laser: 1.064 nm, akurasi pengulangan: 0,01 mm, jenis laser: laser serat, Perlengkapan: Port USB, pencahayaan, The versatile LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables the marking of nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking has become essential. The powerful laser software allows users to easily create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software is also capable of automatically serializing numbers and part numbers after initial setup. Moreover, it can retrieve variable data (such as drawing numbers and project designations) from existing spreadsheets and automatically transfer this information into predefined fields. Integration of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, motorized Z-axis, drawer systems, and more, are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking area 150x150mm (larger sizes available as an option) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system for automatic focus distance determination Codpsyxccrofx Ag Djrb • Optional: extraction system (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder for easy focus adjustment • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminium profile • Air-cooled • Door width approx. 700mm / door pass-through height: 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, posisi kepala milling: mittig, kecepatan spindel (maks.): 60.000 rpm, tinggi total: 1.550 mm, panjang total: 1.870 mm, lebar total: 1.040 mm, kecepatan rotasi (maks.): 60.000 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 560 kg, jangkauan kerja: 420 mm, masa garansi: 12 bulan, jenis penggerak: Linearmotor, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Semi-automatic depaneling / base unit with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of modern production processes. PCB panels of various materials are separated by cutting and routing techniques that minimize dust and mechanical stress, ensuring maximum product flexibility, precision, and throughput. High-dynamic linear motor axes, tools, and grippers fulfill the highest quality requirements, guaranteeing the depaneling machine exceptional durability and reliability. Semi-automatic depaneling – tailored solutions The LOW 4322 depaneler allows for rapid product changeover while maintaining short cycle and handling times. PCBs are loaded using a parallel shuttle; placement and securing are achieved via pin clamping technology, combined with vacuum suction units when necessary. Made in Germany The machine is equipped with: • Shaft and disc tool separation module mounted on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measurement system • Dual loading module configured as a parallel shuttle, left and right separated with sliding doors • Profile frame with two maintenance doors – left and right, ESD-compliant • Standard vision system base module for teach-in programming • Working area: 420 x 330 mm per side • Automatic milling bit length offset management • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Milling bit breakage detection (shaft milling bits only) • Ready for vacuum clamping technology • Disc and sliding doors are ESD-compliant Optional: A dust extraction unit can be retrofitted on request. Crjdsxt Dk Ropfx Ag Djb

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, lebar total: 600 mm, panjang total: 1.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 150 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jangkauan kerja: 400 mm, tinggi produk (maks.): 30 mm, model controller: SPS-Steuerung Siemens Simatic HMI, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, akurasi pemposisian: 1 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pencahayaan, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock Csdpoyx Hrksfx Ag Dorb • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 204065, Used CNC cutter/plotter with cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials Equipment details of the used machine: Csdpfoif Ek Rex Ag Dsrb • 1 cutting bridge and 1 multifunction tool head The machine is supplied with a powered rotary knife, electrically oscillating knife, and a milling cutter (including extraction system) • Multifunction tool head suitable for up to 2 interchangeable tools • Powerful vacuum blower for secure material fixation • Standard configuration with grey conveyor belt table. (Conveyor). Optional green-blue exchangeable conveyor available (provides high contrast for dark materials) Additional tools available (on request): • EOT electrically oscillating knife • POT pneumatically oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutting knife • Printer mark detection • Camera-based registration • Punch tool for notches or holes • Milling cutter with extraction system User-friendly • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones activated with a click Fast amortization • Low costs with high added value • Optimal material utilization with nest expert software modules (not included) • High-speed operation • Consistent precision Technical Data: • Short cutting cycles due to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll material (optionally expandable with appropriate unwinder) • Fast return on investment (Product image for reference) The machine is CE-certified.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2002-045, Used CNC Cutter/Plotter Machine Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for register mark detection • Multifunctional tool head for holding 2 interchangeable tools Crodpfefnlkwex Ag Dob • Powerful vacuum blower for material fixation • Standard equipped with grey conveyor belt table (conveyor). Cyan-blue exchangeable conveyor possible (offers high contrast for dark materials) Additional tools upgradeable (upon request): • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Driven Rotary Tool • UCT Universal Cutting Tool (drag knife) • KCT Kiss-Cut Tool • CTT Creasing Tool • V-Cut Angle Cutting Tool • Print mark recognition • Camera registration • Punch tool for notches or holes • Milling tool with extraction system User-friendly • Easily interchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones can be activated at the click of a button Quick payback • Low operating costs, high added value • Best material utilization with nest expert software modules (not included) • High speed • Consistent precision Technical data: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (expandable with matching unwinder) • Rapid payback (Product photo as example) The machine is CE-certified

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025-078, lebar kerja: 1.600 mm, tinggi kerja: 100 mm, lebar pemotongan (maks.): 1.600 mm, jumlah slot dalam magazin alat: 2, Used Machine CNC Cutter/Plotter Cutting Area X and Y: 1,500 x 1,600 mm (demo model) Multifunctional CAM cutting system with CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting gantry and 1 multifunctional tool head • Multifunctional tool head capable of holding 2 interchangeable tools • High-performance vacuum blower for material fixation • Standard with grey conveyor belt table (Conveyor) • Maximum material height: 100 mm Additional tools available (on request): • EOT - electric oscillating tool • POT - pneumatic oscillating tool • PRT - driven rotary tool • UCT - universal cutting tool (drag knife) • KCT - kiss-cut tool • CTT - creasing tool • V-Cut - angle cutting tool • Printer mark recognition • Camera registration Csdjwgc I Rjpfx Ag Djrb • Punching tool for notches or holes • Milling tool with extraction system User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones can be activated at the click of a button Rapid payback • Low operating costs with high added value • Optimum material utilization via nest expert software modules (not included) • High cutting speeds • Consistent precision Specifications: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single-layer or multi-layer material • Suitable for both sheet and roll materials (expandable with appropriate unwinder) • Rapid payback (Product photo is an example) The machine is CE certified.

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 45 h, nomor mesin/kendaraan: 202023-078, Sistem pemotongan CAM multifungsi dengan teknologi jet air murni – tanpa abrasif (mesin pemotong jet air). 2 jembatan pemotongan dengan 2 kepala pemotong, termasuk sumbu Z. 1 kepala dengan fungsi potong sudut. 1 kepala untuk pemotongan 2D. Untuk pemotongan busa, plastik, tekstil teknis, dan bahan lain yang berbentuk lembaran, fleksibel, non-logam. Tinggi material maksimum: 140 mm. Area pemotongan X dan Y: 2850 mm * 2750 mm. Kelas perlindungan: IP54. Termasuk pompa tekanan tinggi BFT 40.22. (Foto produk sebagai contoh). Mesin bersertifikat CE. Cedpfx Asfhgvweg Derb

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Model dasar Panel Bender – Pusat Penekuk Credpfsy H Huhex Ag Dob Untuk informasi lebih lanjut dan penawaran khusus, silakan kirimkan permintaan Anda kepada kami. Kami akan segera memproses permintaan tersebut dan menghubungi Anda.

Kondisi: bekas, Machine weight approx. 110 kg Required space approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding units, which has already proven itself thousands of times, is now being expanded with a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also enables, in this case, the integration of the respective benefits into innovative welding equipment. --> Technical Data Power supply: 3/PE AC 400 V Maximum primary power: 14 kVA Supply fuse: T 16 A Adjustment range: 5 - 300 A Stick electrodes: Ø 1.5 - 5 mm Protection class: IP 23 Cedpfx Aewf Rg Sog Derb Water cooling unit for the welding torch: built-in

Kondisi: bekas, Tahun pembuatan: 2007, The approximate machine weight is 290 kg. Required space: approx. 1050 x 560 x 840 mm. Credpjwf Rg Esfx Ag Dob The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process results in higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the heat-affected zones, and, where applicable, omission of filler materials). Technical specifications: - Welding current type: DC - Mains voltage (50/60 Hz): 400 V - Phases: 3 - Adjustment range: 10 - 320 A - Adjustment range electrode: 25 - 280 A - Welding voltage: 22 V - Open circuit voltage without HF: 70 V - Open circuit voltage with HF: 90 V - Primary power: 23 kVA - Duty cycle at 60%: 320 A - Duty cycle at 100%: 260 A - Cooling type: F - Protection class: IP 23

Kondisi: bekas, Tahun pembuatan: 2007, Approximate machine weight: 290 kg Space required: approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) as well as for both direct and alternating current welding (AC/DC version), based on an innovative arc forming process developed by Hermann GmbH. In practical use, the SHARC process delivers higher welding speeds while simultaneously improving seam quality and reducing welding ancillary costs (such as less distortion, improved penetration, minimized discoloration of the workpiece, reduced hardening of the transition zones, and, if needed, dispensing with filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Crsdpfx Aewf Rgxog Dsb Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Kondisi: bekas, Tahun pembuatan: 2007, en-001 Csdpfxswf Rgrj Ag Dsrb