Beli Berrenberg Mesin Press Eksentrik Tiang Tunggal, Mesin Press Punching Eksentrik bekas (80.015)

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Punching force: 25 t (250 kN) Pass-through width: 1800 mm (1660 mm usable) Bsdpfx Aou Szfuoiyslh Clear opening between uprights max./min.: 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic rail punching machine Hydraulic pressure: 250 bar Punch table area = 1830 x 500 mm Punch carriage/plate = 500 x 500 mm; Travel speed = 800 mm/sec; Punch stroke = 63 mm/s, Forward/reverse travel 125/125 mm/sec. Operation via control panel with pressure switch/control lever Equipment: 2x pneumatic feed rollers Ø 120 x 1630 mm, pneumatically operated open/close

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Bsdpfx Aieu N Ddwsyslh Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) Bljdeu N Dfhopfx Aiyoh - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, Tahun pembuatan: 1994, Technical details: Air pressure required: 8 bar Total power requirement: 14 kW Machine weight approx.: 80–170 kg per machine MULTIFUNCTIONAL PUNCHING AND DRILLING MACHINE, ideally suited for aluminium window construction. 3 units: - For Schüco aluminium window frame, mullion, and transom profiles S65 - For Schüco aluminium window sash profiles, Royal system S55, S65, and S70 - For Schüco aluminium door profiles, Royal S65 door base profiles - Foot-operated control - Compressed air gun A N D DRILLING MACHINE Bjdpsu Icyhofx Aiyelh Application: - Drilling machine for door hinges - Drill holders: for 8 units; 6 countersink drills to be used with Ø = 11/15mm, approx. 80mm length - Tool clamping is done via foot pedal, drilling is performed manually - Accessories: various attachments.

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm Bljdsu Nfizjpfx Aiyjh - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Belt and ram guards Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic punching press for precision work (high-speed press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide Bledju Icxqepfx Aiyjh - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Sale as is, as a donor for spare parts or as a replacement machine. In stock. *

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Bedpfx Aisu N A Uusyjlh Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Bodpfxju N A U Is Aiyslh

Kondisi: bekas, Tahun pembuatan: 1974, Technical details: Pressure: 30 t Ram area: 450 x 250 mm Ram adjustment: max. 50 mm (manual) Strokes per minute: 20 - 120 Stroke: approx. 20 mm Stroke adjustment: no Installation height / Working space: 220 - 280 mm Usable table area: 600 x 600 mm Total power requirement: 7.5 kW Approx. machine weight: 5.0 t Dimensions L x W x H (machine): 1.8 x 1.2 x 2.7 m Dimensions L x W x H (control cabinet): 0.92 x 0.46 x 1.4 m Mechanical 4-column stamping press Bsdpfxsu Icx Re Aiyolh with feed unit with operator panel Clearances: Frame opening front = 350 mm and lateral = 258 mm

Kondisi: bekas, Detail Teknis: Tekanan: 90 t Jangkauan: 320 mm Jumlah langkah: 90 langkah/menit Tinggi pemasangan: Meja/ram atas: sekitar 380 mm Penyetelan ram: maks. 65 mm Permukaan ram: 600x55 mm Bodpfx Aieu Nfg Hjyelh Pelat clamping pada meja: 800x640x80 mm Jalur lewat: 260x160 mm Pengaturan langkah: 60 mm tetap Kebutuhan daya total: 5,5 kW Berat mesin sekitar: 4500 kg Kebutuhan ruang sekitar: P:1,8xL:0,82xT:2,42 m - Langkah tunggal/berkesinambungan - Pemeriksaan rutin dilakukan, direkondisi tahun 2010 - Saat ini tanpa panel kontrol, tanpa sistem kendali, tanpa tangki udara tekan

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 spm Bledpfx Asu Nfi Ujiyjh Table surface: 900x640 mm Throat depth: 355 mm Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Passage hole in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without a machine control system/control cabinet. (Optional installation possible) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guard PRESSMATIC friction clutch and brake unit

Kondisi: bekas, Tahun pembuatan: 1969, Technische_Details_DE_001 Bledpfxsxu Dwmj Aiyeh

Kondisi: bekas, Tahun pembuatan: 2011, technik-details-0001 Blsdpfx Ajyli Sfeiyjh

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 28 mm Throat depth: 345 mm Drilling stroke: 190 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MK 4 Spindle speed: 50 - 1280 rpm / 4-step stepless Feed: 0.1; 0.2; 0.3 mm/rev, manual/automatic Distance spindle/table max.: 200 - 800 mm Table clamping surface: 450 x 600 mm Table rotation: 360° Table adjustment: vertical 600 mm Column diameter: Ø 160 mm Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 1.0 x 0.71 x 2.0 m Thread cutting by selectable right and left-hand rotation via foot switch and/or depth stop Table adjustment by handwheel Coolant system Bedpfx Aieyq Rpioyjlh Machine vice Quick-change chuck Röhm Supra 3 - 16 mm Slight damage to the cover as seen.

Kondisi: bekas, Detail teknis: Tekanan: 160 t Overhang: 760 mm Langkah ram: 32...140 mm Jarak meja/ram: 400 mm Penyesuaian ram: 100 mm Jumlah langkah: 50 langkah/menit Meja: 760x1000x95 mm Lubang tembus di meja: 400x350 mm Luas permukaan pemasangan ram: 630x850 mm Pelat pemasangan: 760x1010x92 mm Kebutuhan daya total: 15 kW Berat mesin kurang lebih: 6,2 t Dimensi mesin (PxLxT): 2,9x1,2x3,4 m Dimensi panel kontrol (PxLxT): 0,8x0,45x2,1 m Pengoperasian dengan kendali dua tangan Mesin dapat didemonstrasikan sesuai permintaan. i.D. * Blsdpeu Nfhqjfx Aiyjh

Kondisi: bekas, Technical details: Bljdeu Icw Hspfx Aiyoh Punching cross-section in mm²: 45 kp/mm² Table size: 120x100 mm Throat depth: 80 mm Approx. machine weight: 15 kg Space requirement approx.: 0.3x0.2x0.95 m Punching machine!

Kondisi: bekas, Tahun pembuatan: 2018, de-Haeger-618MSPHe-202406 Blodpfx Aey Uvh Toiysh

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, lebar total: 350 mm, panjang total: 1.500 mm, tinggi total: 530 mm, Sudut pembengkokan (maks.): 135 °, The press brake enables the production of complex profiles and bends. Thanks to its segmented design, demanding sheet metal processing tasks can also be performed. Our model features an improved construction – with the simple and quick removal of the segments, you can bend channels, boxes, or similar shapes. The segments on the upper beam are fastened with hexagon socket screws. Lowering via a hand lever Upper clamping beam with 45° tip angle Easy adjustment of the upper clamping beam; removable segments for box bending Machine equipped with a deflection compensation system (eliminates the so-called “banana effect” when bending thicker sheets) Technical Data Working length: 1220 mm Max. sheet thickness: 1.5 mm Max. opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENTED PRESS BRAKE FOR SHEET METAL 1220 × 1.5 MTP 165 KG Delivery Conditions Machine is brand new 12 months warranty Bsdpfeytfabox Aiyjlh Warranty service Service available after the warranty period CE declaration of conformity Technical documentation (DTR) in English Delivery to the customer is possible. Transport costs are calculated individually based on the carrier’s offer. If you are interested in other machines, we invite you to visit our website.

Kondisi: baik (bekas), fr-01 Bsdpfx Aijzagq Ueyjlh

Kondisi: bekas, OTT JU 90 veneer press - used - Bedpewmmrajfx Aiyjlh ----- Technical Data ----- Pressing area: 2,550 x 1,350 mm Heating plate output: 9,100 W per plate Number of cylinders: 4 units

Kondisi: sangat baik (bekas), NOMOR KATALOG 8008 SPESIFIKASI TEKNIS - area pemuatan: 2 - penjepit samping yang dapat diatur secara manual: 2x6 buah - penjepit atas pneumatik: 2x2 buah - panjang maksimum elemen yang direkatkan: 3000 mm - tinggi maksimum elemen yang direkatkan: 1000 mm - ketebalan maksimum elemen yang direkatkan: 100 mm - dimensi (p/l/t): 3000x1300x1650 mm - berat: sekitar 600 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3000 mm – tidak dicat – mobil – dengan roda – mesin press bekas, kondisi sangat baik Harga netto: 12.900 PLN Harga netto: 3.071 EUR (berdasarkan kurs 4,20 PLN/EUR) Bodpfx Aey T Rdyjiyelh (Harga dapat berubah tergantung fluktuasi kurs yang lebih besar)

Kondisi: bekas, Tahun pembuatan: 1998, ZANI TYPE: AFN 200t TEKANAN : 200t LANGKAH : 20-180mm LANGKAH PER MENIT: 50 DAYA : 15kw DIMENSI MEJA ATAS : 1100x760mm DIMENSI MEJA BAWAH : 1300x850mm BERAT : 19,5t TAHUN 1998 BUATAN ITALIA Bljdpfezau Uujx Aiysh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Working area X .. 370 mm Working area Y .. 700 mm Pressing force 28.0 t Maximum sheet thickness 12.7 mm steel Throat depth 310 mm Stroke height 0 - 40 mm Max. strokes per minute 180 Max. punching diameter 105 mm Worktable size 845 x 1420 mm Working height 900 mm Oil capacity 50.0 l Total power requirement 5.0 kW Bsdpfxey Umdfe Aiyslh Machine weight approx. 1800 kg Dimensions L x W x H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 Euro Special price on request !! The machine was exclusively used in a test area and therefore has very low operating hours !! The ECCO LINE hydraulic punching machine is specially optimized for processing sheet metal and profile parts. It is characterized by its flexibility and production precision. Machines in the ECCO LINE series are equipped with 28 t punching force in combination with the proven TRUMPF tool system. Tool change time approx. 15 seconds (manual). Operation: After installing the tool, the stops are positioned in X and Y directions as required, and the material is pushed against the stops. The hole is then punched by actuating the foot pedal. Machine Features: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Equipment: - Robust electro-hydraulic punching machine - TRUMPF tool system with numerous application tools - Stop system with digital displays * Magnet scale integrated laterally into the machine table * Reading head integrated into the stops * Energy guiding chains for supply to the reading head * Evaluation electronics * Position displays mounted on the stops * Positioning device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single, and continuous stroke - Infinitely variable stroke height adjustment - Free-moving foot switch * Supplied with numerous punching tools!*

Kondisi: bekas, Tahun pembuatan: 1970, Mesin Bor Pilar FLOTT SB32 Dudukan spindel MK3 Kecepatan spindel 135-770 rpm Bjdpfsyvr Acjx Aiyjlh Meja bundar diameter 400mm Tinggi mesin 2 m Berat sekitar 200 kg.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Pneumatic press, manufacturer SCHMIDT, model ZHS-2/22, year of manufacture 1999. Equipped with two-hand operation. UVV-certified until 2023. Blsdjiduvcepfx Aiyeh