Beli C Presse bekas (63.360)

Kondisi: bekas, Tahun pembuatan: 2000, gaya penekanan: 260 t, panjang langkah: 250 mm, lebar meja: 840 mm, panjang meja: 1.500 mm, tekanan udara: 9,807 batang, sambungan udara terkompresi: 9,807 batang, penyesuaian silinder hidrolik: 120 mm, Kami menawarkan mesin press eksentrik Chin Fong OCP-260N double column bekas ini, tahun pembuatan 2000. Model: OCP-260N Nomor seri: A00373 Tahun pembuatan: 2000-11 Nljdjykbcmepfx Aiveg Kapasitas: 260 ton Frekuensi langkah: 20 – 40 langkah/menit Panjang langkah: 250 mm Tinggi cetakan maksimum: 500 mm Celah atas: 7 mm Rentang penyetelan meja: 120 mm Ukuran pelat atas (P × L): 1130 × 700 mm Ukuran pelat bawah (P × L): 1500 × 840 mm Daya motor utama: 22 kW Jumlah kutub: 4 Berat mesin: 31,8 ton Tekanan udara tekan: 9,807 bar Suhu oli maks.: +100 °C Suhu oli min.: -10 °C Volume oli: 180 liter Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: bekas, Tahun pembuatan: 2026, panjang total: 4.000 mm, lebar total: 2.100 mm, tinggi total: 2.050 mm, Warna: Putih Berat kosong: 4.020 kg - Tahun pembuatan: 2026 - Dokumentasi tersedia: Ya - Jenis dokumentasi: Data teknis, Skema kelistrikan, Buku panduan pengguna - Bahasa: EN - Format: Berbentuk kertas - Terdapat penandaan CE: Ya - Terdapat sertifikat CE: Ya - Daya mesin utama [kW]: 2.1 - Penggerak mesin press: Hidraulik - Panjang benda kerja maksimum [mm]: 3000 - Lebar benda kerja maksimum [mm]: 1300 - Tinggi benda kerja maksimum [mm]: 400 - Total langkah [mm]: 400 - Jumlah area kerja [unit]: 1 - Jumlah lantai [unit]: 1 - Bahan pelat: Pelat terpasang - Jumlah silinder [unit]: 6 - Diameter silinder [mm]: 70 - Total tekanan [ton]: 70 - Tekanan kerja [kg/cm²]: 2 - Terdapat boiler pemanas: Ya - Jenis pemanas: Dipanaskan dengan minyak - Suhu maksimum [°C]: 120 Nljdpfx Ajzkr Tbeivsg - Dimensi pengiriman: 4000mm x 2100mm x 2050mm (p x l x t) - Berat pengiriman [kg]: 4020kg - Paket pengiriman [unit]: 1 Informasi keuangan Pajak pertambahan nilai: Harga yang tertera belum termasuk pajak pertambahan nilai Pajak pertambahan nilai/pemungutan pajak diferensial: Pajak pertambahan nilai dapat dikurangkan untuk pengusaha Pengiriman dan pembelian kembali selalu memungkinkan untuk semua produk dari sektor industri Yorick Diebels

Kondisi: baru, gaya penekanan: 300 t, 300 T Portal Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer. We can manufacture this machine for you at very short notice – customized to your individual requirements if desired. This is a hydraulic gantry press with a press force of 300 t, designed for straightening, assembly, and machining processes on large-format components. Base price: €102,000 net Optional Equipment (on request): The listed options are based on completed customer projects and enable tailored adaptation of the machine to the respective application. The base machine provides a functional standard configuration – in practice, it is usually expanded with additional equipment and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm thick table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control system with 7" touchscreen - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system integrated in the table (various versions) ==== Technical Data & Information: ==== General Specifications Type: Gantry Press Press force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Open height: 1,000 mm Frame spacing: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Nedjyxnw Ujpfx Aivslg Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Cylinder transverse travel: ±900 mm Longitudinal travel of gantry: 2,500 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Gantry travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump output: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: Manual pendant control Optional: SIEMENS S7-1200 control system Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Double-layer coating (RAL colours selectable) ===== Straightening of steel components, vehicle construction, maintenance, assembly work, special structures Gantry press, straightening press, hydraulic press, 300 tonne press, industrial press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they also fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our major strength lies in special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses mainly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2020, en-1 Njdpfsfnlqdex Aivslg

Kondisi: baru, nomor mesin/kendaraan: DF0261 - Rev.00, gaya penekanan: 63 t, Tool Try-Out Press – Manufacturer Hidrobrasil – 63 t Tryout Press – Table 1,200 × 1,000 mm For sale is a hydraulic try-out press from Hidrobrasil with a press force of 63 t. The machine features an extendable and tiltable table, a fold-away upper tool, and a large stroke of 1,050 mm, making it particularly suitable for spotting, tool adjustment, and tryout operations in tool and mold making. ===== Technical Data + Information: Spotting Press Hidrobrasil – 63 t Tryout Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Tryout Press / Spotting Press - Press force: 63 t - Machine weight: approx. 10 t - Dimensions (L × W × H): approx. 3,350 × 1,800 × 4,700 mm ==== Working Area - Stroke: max. 1,050 mm ==== Table System - Table size: 1,200 × 1,000 mm - Table travel: 1,100 mm - Table tiltable/swiveling: up to 75° - Table swivel speed: 25 mm/s - Max. table load: 5 t ==== Tool Mounting - Upper tool foldable: 180° ==== Forces - Return force: 6 t ==== Hydraulics - Motor power: 10 kW - Oil tank: 200 l - Electric oil cooling: 1.5 kW ==== Control - Monitor: 12" (WEG) ==== Machine Design - Column diameter: 120 mm ===== Spotting operations, tool adjustment, tool try-out, mold making, tool making, tryout jobs, adjustment processes, flexible tool processing Nlodpsfhcc Sofx Aivjg Spotting press, tool tryout press, tryout press, tool adjustment press, tool try-out press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your requirements? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian National Safety Regulation NR 12, which is based on these. Our greatest strength lies in custom machine building and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.200 kg, jenis arus masuk: tiga fasa, lebar total: 2.200 mm, panjang total: 6.000 mm, tinggi total: 1.600 mm, tegangan masuk: 400 V, arus masuk: 32 A, Demo version of the device, technically fully functional, used only for testing purposes. Set of 5 new printheads included. The Konica Minolta PKG-1300 is a modern, industrial digital packaging printer, offering high print quality, process automation, and efficient production of short and personalized runs. Ideal for print shops, packaging manufacturers, and companies seeking a flexible solution for printing on cardboard and corrugated board. The Konica Minolta PKG-1300 is a solution for producing: - individual boxes, - transport packaging, - promotional packaging, - test/prototype packaging, - short and personalized runs for e-commerce, FMCG, and private labels. It is the perfect solution for companies requiring: - print-on-demand, - packaging personalization, - quick turnaround of short runs, - reduction in prepress and production costs. Printer specifications: Resolution: High resolution: 1200 x 1200 dpi / Low resolution: 600 x 1200 dpi or 300 x 1200 dpi Print speed: High resolution: 9 m/min / Low resolution: 18 m/min or 27 m/min Ink: Pigment ink, 5-liter tanks Power consumption: Printer: 8000 W, Web cleaner: 5500 W / Single power plug for the whole system: 400 V AC, 50 Hz, 3-phase, 32 A Weight: 1200 kg Feeder specifications: Media: Cardboard sheets from 1 mm to 50 mm thick Max. feeder size: 1300 mm width x 1600 mm length Min. feeder dimensions: 300 mm width x 400 mm length Feeding speed: up to 27 m/min Max. feed stack: 400 mm Power consumption: Feeder: 3500 W / Differential current protection RCCB 4P, 40 A, 300 mA, C, 10 kA (to be provided by the client) Weight: 1100 kg Stacker specifications: Media: Cardboard sheets from 1 mm to 50 mm thick Max. board size: 1300 mm width x 1600 mm length Stacking speed: up to 27 m/min Max. stack height: 700 mm Power consumption: Stacker: 3500 W / Circuit protection: RCCB 4P, 40 A, 300 mA, C, 10 kA (must be provided by the client) Compressed air: 6 bar, 50 l/min, external diameter 8 mm Weight: 900 kg Software Internet connection: required 24/7 Platform: PC/Windows Controller: Ergosoft RIP Nlsdpeyx E Dxofx Aivog Interface: PC Operating environment Operation: 20°C – 30°C Humidity: 50% – 70% RH (non-condensing) Shipping on original pallets. Assistance with organizing transport possible. Price negotiable.

Kondisi: baru, gaya penekanan: 200 t, DURENDUS DPS-200 – Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here was custom-built and delivered to a customer. We can manufacture this machine for you again at short notice. This is a hydraulic gantry straightening press from DURENDUS with a maximum press force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum daylight of 800 mm, and a stroke of 400 mm, making it ideal for straightening operations, pressing-in processes, as well as applications in steel construction and toolmaking. Options (on request): The listed options are based on realized customer projects and allow targeted adaptation of the machine to specific application requirements. The base machine provides a functional standard configuration—in practice, it is usually equipped with additional features and project-specifically configured. Example options include: * Siemens S7-1200 PLC + 7” display for operation * Wireless remote control * Safety light strip at the bottom of the gantry columns (600 mm) * T-slotted table * Motorized bridge movement * Extended travel range * Increased open height * Light curtain at floor level beneath the bridge * Laser distance measurement * Lifting cylinders in the table ##### Technical Data + Information: Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Information Manufacturer: DURENDUS Model: DPS-200 Design: Gantry Press / H-Frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between uprights: 1,580 mm Table height: 900 mm ==== Working Area Table size: 1,500 × 2,000 mm Max. daylight: 800 mm Ram stroke: 400 mm Ram extension: 300 mm ==== Movement System Lateral cylinder adjustment: ±750 mm Bridge travel: 1,500 mm Operation: manual adjustment (cylinder and bridge) ==== Hydraulic Cylinder Max. working pressure: 320 bar Working speed: 9 mm/s Return speed: 17 mm/s ==== Hydraulics & Drive Motor power: 15 kW Pump capacity: 32 l/min Tank volume: 140 l Hydraulic components: DUPLOMATIC Filter: FILTREC Cooling: air cooler ==== Control System Operation: manual via hand lever valve Integrated safety PLC Components: SIEMENS Optional: S7-1200 PLC with 7" touch panel, recipe management, pressure and travel control ==== Safety Hydraulic overload protection Electronic overload protection Upper/lower limit switches CE-compliant execution ==== Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 18 kW Control cabinet: IP54 ##### Nlsdpfx Aijyzfuiovog Areas of application: Straightening, pressing-in, forming, tool setting, steel construction, metalworking, mold making, automotive Hydraulic Press, Gantry Press, Straightening Press, H-Frame Press, 200 t Press, Tryout Press, Tool Setting Press, Tool Try Out Press, Adjustable Press, Heavy-duty Press The shown images are for sample reference only; actual delivery may vary.

Tahun pembuatan: 2018, jam operasional: 7.000 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan unit bekas Himel / Gama, yaitu lemari kontrol mesin pembuat pelet untuk produksi pelet dari jerami / rumput kering / alfalfa, tahun pembuatan 2018. Unit ini telah beroperasi sekitar 7000 jam. Kapasitas produksi per jam, tergantung pada jenis biomassa, menurut produsen adalah 700 - 1200 kg. Selain itu, tersedia juga mesin pembuat pelet terpisah dengan daya 90 kW seharga 95.000 €, yang telah beroperasi sekitar 500 jam, tahun pembuatan 2025. Nlodpfxjzrvh Ee Aivog Tipe: Lemari kontrol mesin pembuat pelet Nomor: 20182138 Tahun pembuatan: 2018 Sumber daya: TNC-S 400V AC/N/PE Frekuensi: 50 Hz Daya: 195 kW Arus maksimum: 375 A Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, EN001 Nedpswxdctefx Aivelg

Kondisi: baik (bekas), Tahun pembuatan: 2001, Format: maks. 360 x 310 mm; min. 140 x 100 mm Ketebalan blok buku: maks. 60 mm; min. 3 mm Format sampul: maks. 642 mm; min. 203 mm Kapasitas: maks. 18.000 lembar/jam Peralatan Mesin pengumpul • Elemen penjepit • 18 pengumpan 3681 • Pengalih keluaran 3714 Kontrol • Kontrol lembaran ganda dan lembaran cacat • Kaliper penyesuaian otomatis ASAC Komponen antara • 2 elemen vibrasi 3642 • Terhubung dengan Mesin penjilid lem • Commander • 41 penjepit • Saluran masuk dengan arah vibrasi • 2 stasiun pemotongan • Pemrosesan punggung ganda • 2 unit perekat punggung hotmelt • Unit perekat sisi hotmelt • 3 pra-pelebur • Pengumpan lembaran SF • Pemampatan lembaran SF • Pemampatan lembaran SF kedua • Sabuk penyusun rantai pelat Bagian pendingin Njdpfxsq Rv Hts Aivjlg • Terintegrasi dengan • Pemotong tiga sisi Zenith S Aksesori opsional – tidak termasuk dalam cakupan pengiriman • Pengumpan silang • Pengemasan film • Mesin paletisasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1963, Fungsionalitas: berfungsi sepenuhnya, Doppeldruckpresse DM3 dari Heuer Hammer dalam kondisi sangat baik. Siap pakai segera. Nledpfexywlnsx Aivsg

Kondisi: bekas, Tahun pembuatan: 2003, Luas filter: 50 m² Sambungan penghisap: 300 mm D Dimensi: 1650 x 1580 x 3550 mm Berat: sekitar 500 kg Rangka dasar dengan sekrup pengangkut: Motor: 1,5 kW Mesin pembentuk briket Schuko C 800 - 2 Daya yang dibutuhkan: 3 kW Kapasitas pemrosesan: sekitar 35 - 55 kg/jam, tergantung pada material, dilengkapi dengan sistem pemadam kebakaran Berat: sekitar 1200 kg Lokasi penyimpanan: Nattheim Nlodjzb N T Uopfx Aivsg

Kondisi: baik (bekas), Tahun pembuatan: 2011, Kondisi: bekas, dalam kondisi berfungsi Konstruksi rangka yang kokoh dan balok penekan memastikan perakitan dan perekatan rangka yang presisi. Mesin penekan menjamin kesesuaian sudut yang akurat sekaligus mencegah distorsi atau perubahan bentuk pada rangka. Berkat langkah yang panjang pada silinder hidraulik, balok bawah dan rahang penjepit memerlukan penyesuaian yang lebih jarang. Balok bawah dilengkapi dengan sistem pengangkatan dan penguncian otomatis. Spesifikasi Teknis • Ukuran rangka maksimum: 3000 × 2000 mm Nlsdpfx Aiszlyv Tevsg • Ukuran rangka minimum: 250 × 340 mm • Daya pompa hidraulik: 3 kW • Gaya penekanan total maksimum pada balok horizontal dan vertikal: 19 ton • Langkah silinder hidraulik vertikal: 1100 mm • Langkah silinder hidraulik horizontal: 1200 mm • Balok bawah dapat disesuaikan ke tiga ketinggian: 380, 680, dan 980 mm • Tekanan penekanan vertikal dan horizontal yang dapat disesuaikan • Dua pagar horizontal dengan sistem penyesuaian cepat • Gerakan horizontal dan vertikal dikendalikan oleh katup yang dioperasikan dengan tuas yang dipasang pada rangka mesin • Desain yang sesuai dengan standar CE • Unit kontrol tombol tekan yang dipasang Spesifikasi disediakan hanya untuk tujuan informasi. Mesin ini ditawarkan untuk dijual atas nama pelanggan. Pemeriksaan dapat dilakukan dengan perjanjian sebelumnya. Silakan hubungi kami melalui sistem pesan platform untuk informasi lebih lanjut dan rincian kontak teknis yang relevan.

Kondisi: baru, nomor mesin/kendaraan: DF0177, gaya penekanan: 315 t, Tuschier Press – Manufacturer Calende – 315 t Sliding Table Press – Table 2,500 × 1,800 mm For sale is a high-performance Tuschier press from Calende with a pressing force of 315 t. The machine features a large table area of 2,500 × 1,800 mm, a stroke of 800 mm, as well as a finely adjustable speed profile, making it especially suitable for large-scale spotting, adjustment, and tryout applications in tool and mould making. ===== Technical Data & Information: Tuschier Press Calende – 315 t Sliding Table Press ==== General Information - Manufacturer: Calende - Model: Tuschierpresse - Design: Sliding Table Press / Spotting Press - Pressing Force: 315 t - Machine Weight: approx. 36 t - Dimensions (L × W × H): 3,910 × 4,905 × 4,169 mm ==== Working Area - Stroke: max. 800 mm ==== Table & Ram - Table Size: 2,500 × 1,800 mm - Column Diameter: 220 mm ==== Speeds - Working Speed: 1 – 10 mm/s (adjustable) - Return Speed: 1 – 25 mm/s ==== Hydraulics - Drive Power: 25 kW - Oil Tank: 450 l ==== Notes - Information on equipment (controls, safety devices, covers) partially unspecified ===== Spotting work, tool adjustment, tool try-out, mould making, tool making, large tools, tryout operations, adjustment processes Spotting press, tool try-out press, sliding table press, tryout press, tool adjustment press, tool try-out press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are built to German machinery guidelines as well as European Machinery Directive 2006/42/EC, EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian NR 12 safety directive, which is based on these standards. Our core strength is custom machine building and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, components from leading European manufacturers are predominantly used. Nledjfxyhispfx Aiveg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 Nljdpfxodx R Tfj Aiveg with gold-anodized plates Touch display control - Electric heating plates: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs - Number of openings (daylights): 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - Accessible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with embedded heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Safety standards compliant with CE regulations Standard equipment: - Press table movement with rack-and-pinion and parallel guides at two corners, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for setting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for setting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety stop for lower press table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Available ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, UNITECH merancang dan memproduksi mesin pres pneumohidrolik dengan kekuatan penekanan nominal dari 10 hingga 600 kN, tersedia dalam desain rangka C, dua kolom, dan empat kolom. Harga yang diiklankan sebesar 4.000 EUR (tidak termasuk PPN) hanya berlaku untuk model dasar 10 kN. Semua model mesin pres dan konfigurasi peralatan lainnya akan ditawarkan secara terpisah sesuai dengan kekuatan penekanan yang dibutuhkan, desain rangka, panjang langkah, area kerja, sistem kontrol, dan peralatan keselamatan. Daftar ini mencakup seluruh rangkaian mesin pres pneumohidrolik UNITECH baru untuk aplikasi perakitan dan produksi industri. Setiap mesin pres dapat dikonfigurasi agar sesuai dengan benda kerja, perkakas, dan proses manufaktur yang dimaksudkan. SPESIFIKASI TEKNIS Kekuatan penekanan nominal: – 10, 30, 50, 100, 150, 200, 300, 400, dan 600 kN Desain rangka yang tersedia: – Rangka C – Dua kolom – Empat kolom Rentang langkah: – Langkah daya: 5–20 mm – Total langkah piston: 50–250 mm Kombinasi kekuatan penekanan, desain rangka, dan panjang langkah yang tersedia bergantung pada konfigurasi dan aplikasi yang dipilih. PRINSIP KERJA Sistem penggerak pneumohidrolik menggabungkan langkah pendekatan pneumatik yang cepat dengan langkah daya hidrolik yang singkat dan diperkuat. Kekuatan penekanan penuh hanya dihasilkan selama fase kerja siklus, memberikan solusi yang efisien untuk operasi penekanan dan perakitan industri. APLIKASI UMUM Tergantung pada konfigurasi, perkakas, dan penilaian risiko khusus proses yang dipilih, mesin pres dapat digunakan untuk: – Pemasangan dan perakitan komponen – Pemasangan bantalan dan selongsong – Pengecoran dan pengerasan – Pemotongan dan penandaan – Pembengkokan dan pembentukan – Pelurusan dan kalibrasi KONFIGURASI KUSTOM Parameter dan peralatan berikut dapat disesuaikan dengan aplikasi yang dimaksudkan: – Kekuatan penekanan nominal – Desain rangka – Area kerja dan dimensi pemasangan – Langkah daya dan total langkah piston – Pemasangan perkakas dan benda kerja – Sistem kontrol dan urutan operasi – Pelindung dan peralatan keselamatan khusus aplikasi – Integrasi dengan jalur produksi dan peralatan bantu DOKUMENTASI, PENERIMAAN, DAN PENGIRIMAN Nljdpev Snixjfx Aivog Mesin lengkap dilengkapi dengan penandaan CE, Deklarasi Kesesuaian UE, dan instruksi pengoperasian dalam bahasa yang disepakati: Polandia, Inggris, atau Jerman. Uji Penerimaan Pabrik (FAT) dilakukan sebelum pengiriman. Mesin pres dilindungi oleh garansi 12 bulan. Ketentuan pengiriman standar adalah FCA UNITECH, Zawiercie, Polandia (Incoterms 2020). PERMINTAAN PENAWARAN HARGA Untuk menerima proposal teknis dan penawaran harga, mohon berikan: – Kekuatan penekanan yang dibutuhkan – Desain rangka yang disukai – Dimensi benda kerja dan perkakas – Tinggi kerja dan area kerja yang dibutuhkan – Langkah daya dan total langkah piston yang dibutuhkan – Deskripsi proses manufaktur – Peralatan kontrol dan keselamatan yang dibutuhkan – Waktu siklus atau tingkat produksi yang diharapkan Foto-foto menunjukkan contoh konfigurasi mesin pres UNITECH dan dapat mencakup peralatan opsional. Spesifikasi teknis akhir, harga, dan waktu pengiriman bergantung pada konfigurasi yang dipilih.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial Number: 160/0/46/00 Year of Manufacture: 2000 Nominal force: 1,600 kN Weight: 13,800 kg Nominal strokes: 55 SPM Min./Max. strokes: 10/55 SPM Max. insertions: 17 SPM Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal stroke): 14,500 kJ Min./Max. slide stroke: 10/200 mm Ram adjustment: 110 mm Highest TDC (Top Dead Center) adjustment: 430 mm Max. ejector stroke: 60 mm Table dimensions (H, D, W): 78/750/1250 mm Slide dimensions (D, W): 600/850 mm Shank diameter: 60 mm Shut height from bolster: 370 mm Max. tool size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Arrest position: TDC Voltage: 380 V Nlodpfx Aswaiw Seivjg Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with interlock switches • Clutch plates • Clutch pins and bushes • Flywheel bearings • Flywheel oil seals • Adjustable stroke nose • Counterbalance cylinder seal kit • Air pressure gauges • Electrical control panel • Inverter (variable speed drive) • Motor • Motor pulley • Table resurfaced on CNC machine Supplied with a six (6) month warranty, technical documentation, and CE conformity Electrical control panel warranty: twelve (12) months.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 20 t, Hidrobrasil Double-Column Hydraulic Press – 20 t – 1,400 × 1,100 mm – Stroke 300 mm For sale is a hydraulic double-column press from the manufacturer Hidrobrasil with a pressing force of 20 t. This machine is designed for production and assembly applications in small batch series, featuring easy operation, rugged construction, and precisely adjustable pressing parameters. Thanks to its compact design and reliable hydraulics, it is ideal for a wide range of industrial applications. ==== Technical Data & Information: Hydraulic Double-Column Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Type: Hydraulic Double-Column Press - Machine Description: Production Press - Pressing Force: 20 t (200 kN) - Machine Weight: approx. 3 t - Overall Height: approx. 2,800 mm - Number of Operator Sides: 1 ==== Working Area - Max. Opening Width: 500 mm - Stroke: 300 mm - Table Height above Floor: approx. 900 mm - Table Cut Out: 1,100 × 850 mm ==== Table & Ram - Table Size between Columns: 1,400 × 1,100 mm - Ram Size between Columns: 1,400 × 1,100 mm ==== Speeds - Closing Speed: up to 10 mm/s - Opening Speed: up to 30 mm/s - Pressing Speed: approx. 9 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 280 bar - Main Pump: Bosch Rexroth / Parker, approx. 35 l/min - Oil Tank Capacity: approx. 150 l - Recirculation Pump for Cooling: approx. 6.5 l/min - Motor Power: 3 kW - Total Connected Load: approx. 5 kW ==== Control & Operation Nlodpfx Ashmbhqsivog - Pressure Adjustment: 4–20 t via rotary knob - Stroke setting via slide regulator - Manual lubrication via grease nipples ==== Features - UKF Pump-Over Cooling Filtration (electric cooling) - Two-cylinder system - Sturdy design for continuous production use ===== Assembly operations, loading applications, small batch production, forming technology, production processes Hydraulic press, double-column press, production press, insert press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to the German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these regulations. Our particular strength lies in special machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 2025, Mesin pajangan baru! Harga daftar €17.380 netto MOVE — mesin press vakum presisi tinggi dengan area kerja yang sangat besar untuk pengepresan dan pelapisan vakum pada benda kerja melengkung. Menawarkan fleksibilitas maksimal berkat kemudahan mobilitas dan mekanisme lipat revolusioner, yang mengurangi luas area dasar hingga 45% saat dilipat. Mesin press vakum presisi tinggi dengan bukaan lipat meliputi: Mekanisme lipat revolusioner (pengurangan area dasar hingga 45%), pompa vakum performa tinggi 40 m³ (hingga 900 mbar (9 t/m²)) dari BECKER, opsi pemutusan otomatis saat tekanan tercapai (untuk volume vakum besar), pengaturan tekanan 400 hingga 900 mbar, indikator tekanan vakum analog, membran karet alam elastis tinggi (hingga +130 °C), sistem pengganti membran cepat, meja kerja resin fenol yang kokoh (hingga +120 °C), berlapis 15 kali, peredam tekanan gas untuk bukaan lipat, indikator tekanan vakum, koneksi untuk kantong vakum eksternal, roda putar yang mudah digerakkan, pneumatik FESTO dan teknologi listrik SIEMENS Data teknis dan dimensi: Luas area kerja: sekitar 3050 x 1350 mm Dimensi bagian dalam kerangka: sekitar 3130 x 1430 mm Dimensi total: sekitar 3700 x 1700 x 1100 mm Nlodpfoyi Hd Hex Aivsg Dimensi total (dilipat): sekitar 3700 x 770 x 1780 mm Koneksi listrik: 1~, 0,8/1,0 kW, 230 VAC +/- 10%, 50/60 Hz Berat: 670 kg Lokasi penyimpanan: Rieth

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin Tekuk Hidraulik Merek: TRUMPF, Tipe: TrumaBend V500 Tahun Pembuatan: 2006 Hanya 6.120 jam operasi hidraulik Data Teknis Merek: Trumpf Tipe: TrumaBend V500 Tahun Pembuatan: 2006 Kapasitas: 50 ton Panjang efektif: 1.250 mm Langkah: 215 mm Njdpfxez Ehbhj Aivjlg Jarak antar tiang: 1.040 mm Panjang lengan tiang C: 420 mm Tinggi pemasangan: maks. 385 mm Kecepatan kerja: 10 mm/detik Kecepatan gerakan kembali: 220 mm/detik Tegangan: 3 x 400V Arus nominal: 21,5 A Daya yang terhubung: 8,6 kVA Sambungan udara bertekanan: 6 bar Dimensi: kira-kira P 2,20 x L 2,00 x T 2,40 m Berat: 4,9 ton Peralatan • Pengontrol Trumpf TASC 6000 • Pergeseran matriks pneumatik • Penjepit alat hidraulik atas + bawah Wila/Trumpf • Sumbu yang dikendalikan: Y1, Y2, X, R • 4 jari penahan yang dapat digerakkan • Tirai gulung elektrik sebagai pelindung ruang belakang • Penghalang cahaya keselamatan Bend-Guard di bagian depan • Paket alat: - Alat atas lurus, R1, T 195mm, P = 1.250mm, tersegmentasi - Alat bawah EV003, W10/30°, T 100mm, P = 1.250mm, tersegmentasi Semua informasi tanpa jaminan. Demonstrasi dengan mesin beroperasi dapat dilakukan kapan saja di ruang pameran kami.

Kondisi: baik (bekas), Modul Fitting NC Kistler dengan Stasiun Ganda/Unit Spindel Kistler NCFH 60 Servo Press dengan Gerobak Geser & Stasiun Spindel Modul Fitting NC Kistler NCFH 60 terintegrasi dalam stasiun ganda industri/unit spindel untuk produksi massal otomatis (contoh: pengelasan gesek atau pengepresan presisi). Sistem ini menonjol berkat presisi tinggi, pemantauan gaya-lintasan terintegrasi (sensor piezoelektrik), dan konstruksi sangat kokoh untuk penggunaan industri jangka panjang. Pengepresan dan penyambungan presisi: Ideal untuk proses perakitan berpresisi tinggi di industri otomotif, manufaktur elektronik, atau teknik mesin umum. Jaminan kualitas terintegrasi (Pemantauan Gaya-Lintasan): Sensor piezoelektrik terintegrasi mengukur gaya tarik dan tekan secara akurat selama proses pengepresan, tergantung pada posisinya. Kontrol Proses Fleksibel: Mendukung fungsi lanjutan seperti “Press to block”, pengepresan berbasis posisi, atau penyambungan berbasis kontrol gaya (bersama kontroler yang sesuai, misal: Kistler maXYmos). Penjepitan benda kerja otomatis: Stasiun spindel yang terpasang dilengkapi fungsi penjepitan otomatis (dikendalikan pneumatik/hidraulik melalui silinder terintegrasi), cocok untuk produksi massal otomatis di lini produksi. Nledpfszcpnzsx Aivsg Rangka mesin yang stabil: Seluruh mekanisme dipasang pada rangka baja las berat untuk menahan gaya operasi besar (hingga 6 ton per sisi). Produsen modul fitting: Dr. Staiger Mohilo+Co GmbH / Kistler Group Tipe: 2151B 60304002 Model: NCFH 60 400 300 B H C G Gaya nominal: 60 kN (setara sekitar 6 ton gaya pengepresan) Maks. langkah spindel: 400 mm Maks. kecepatan gerak: 300 mm/detik Tipe motor: Motor servo hollow-shaft AC (165H-180E) Rem tahan: 18 Nm Sertifikasi: CE marking Lingkup pengiriman: Modul fitting Kistler NCFH 60 termasuk kopling flange terpasang, panduan gerobak/geser berwarna kuning, kabel sensor lengkap, serta stasiun penjepitan spindel terkait. “Layanan terintegrasi: Kami juga menawarkan opsi pembiayaan bank sesuai proyek Anda.” komplett-konzept.leasingo.de Temukan lebih banyak produk—baru & bekas—di toko kami! Biaya pengiriman internasional atas permintaan!

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Modell: GL 840 PH H-UV Baujahr: 2016 Druckanzahl: 218 Mio. PQC-S OFF-PRESS KONTROLLSYSTEM (mit USB/CF-Medieneingang) – inkl. Oberkopf-Verstärker HOCHGESCHWINDIGKEITS-ANFAHREN SMART SEQUENCE (Optimierte Startsequenz) SELBSTDIAGNOSE II KHS-AI (Komori High Speed - Advanced Interface) o Vorverknüpfung & Entnahme o Selbstlernende Funktion o Produktionsmanagementsystem (Diagnose, Wartung) o Registervoreinstellung SMART FEEDBACK FRONT/BACK-FARBZONEN GLEICHZEITIGE VOREINSTELLUNG (alle Werke) LUFT-VOREINSTELLUNG VOLLSTÄNDIG AUTOMATISCHER PLATTENWECHSEL – BIEGEFREI FERNSTEUERUNG FÜR TRANSFERZYLINDER-NEIGUNG BOGENSTÄRKE-VOREINSTELLUNGEN BOGENFORMAT-VOREINSTELLUNGSPAKET: • Sauganlegerkopf-Voreinstellung • Verzögerungsradvoreinstellung • Seitenmarke • Ausrichtstauefer auf Auslageseite • Ferngesteuerte Bogenfreigabe-Nockensteuerung VOREINSTELLUNG GEBLÄSE ANLEGERSEITE SEITLICHE STAPELSTEUERUNG AM ANLEGER MIT GRUBENLOSEM PALETTENWECHSLER Nlodpfx Aijy Rmdwjvsg FERNGESTEUERTE SAUGKOPFHÖHE SAUGBAND-ANLEGER (Zusätzliche Gummiräder und Bänder am Anlegerbrett) ANTISTATIK AM ANLEGER SAUGSEITENLEITUNG EINZIEHBRETT VENTURI-FÜHRUNG ULTRASCHALL-DOPPELBOGENERKENNUNG REGISTERKONTROLLE (2-stufige Erkennung) HÖHENVERSTELLUNG GREIFERPADS „A“-TRANSFERZYLINDER FERNVERSTELLUNG „A“-ZYLINDER (EINZUG) – NEIGUNG FERNSTEUERUNG „A“-ZYLINDER (EINZUG) – ANTI-FANOUT ROSTSCHUTZ FÜR PLATTENZYLINDER ROSTSCHUTZ FÜR DECKZYLINDER ROSTSCHUTZ FÜR DRUCKZYLINDER BLANKET-KLEMME MIT SCHNELLVERRIEGELUNG FÜR GESPERRTEN BLANKET BOGENFÜHRUNG ÜBER IMPRESSIONSZYLINDER LUFTGEBLÄSE ÜBER IMPRESSIONSZYLINDER SOLIDE TRANSFERZYLINDER + GREIFERPADS HEBEN/SENKEN (einseitige Einstellung) VOLLSTÄNDIG AUTOMATISCHE DOPPELGRÖSSE 3-ZYLINDER WENDEEINRICHTUNG DRUCKZYLINDER MIT EDELSTAHLMANTEL – nach Wendungseinheit H-UV-DICHTUNGEN FARBÜBERTRAGUNGSINTERVALL-EINSTELLUNG MOTORISIERTER FARBSPENDERRUNDE FARBWALZENSPALT-FOLGEREGELUNG FARBWALZEN-TEMPERATURREGELUNG (Oszillation) FERNSTEUERUNG FÜR FARBOSZILLATIONSTIMING FARBWERK-LÜFTER (Anlegeseite am Werk) FARB-/FEUCHTWERK ENTKOPPLUNG – alle Werke Farbnebel-Absauglüfter (GL40) neue Ausführung KOMORIMATIC-FEUCHTWERK FEUCHTWERKSFORMWALZENDREHZAHLREDUKTION (Delta-Effekt) OSZILLIERENDE AUFFÜLLWALZE FEUCHTWERKSFORMWALZE BRÜCKENWALZE AUSLAGEWALZE UNTER DEM FEUCHTWERKSFORMWALZE SCHÄGEINSTELLUNG AM KOMORIMATIC WASSERSTANDSSENSOR AUTOMATISCHER BLANKETREINIGER (H-UV/Vorbereitung) AUTOMATISCHE DRUCKZYLINDERREINIGUNG (H-UV/Vorbereitung) PNEUMATISCHE FARBWASCHWANNE EIN/AUS AUTOMATISCHE FARBWALZENREINIGUNG – Doppel-Düsen BOGEN-ENTKRÜMMER LUFTGEBLÄSE ÜBER AUSLAGESTAPEL ANTISTATIK-STANGE AN DER AUSLAGE AUSLAGEBOGEN-LAUFRICHTUNGSSTEUERUNG AUTOMATISCHE SCHMIERUNG DER AUSLAGEFÜHRUNGSSCHIENE AUSLAGEBEREICH SENSOREN AUSLAGESTAPEL-ENTNAHME – ANTRIEBSSEITE FESTROLLE – A, B & C GEGENSPRECHANLAGE H-UV-TROCKNERVORBEREITUNG Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Leitfähigkeitsanzeige für Beta.c pH-Wert-Anzeige für Beta.c • PDC-SX (Druckdichtekontrolle – Spektralfotometer mit automatischer Registerregelung) • KID (Komori Info-Service Display) • Baldwin ozonfreies Metallhalogenid-H-UV-System, inklusive: o 1x H-UV LED – am Ausleger o 1x H-UV LED – vor der Wendeeinheit • Technotrans Beta.c 280G • Technotrans externe Kühlung (ohne Installation) • A-APC – Asynchroner Automatischer Plattenwechsel • A-APC / Automatische Blanket-Reinigung Parallelsteuerung für GL-40 • K-PressNavi • DC-Gebläse • Spezieller Farbbehälter-Abdeckungen an allen Werken

Kondisi: baik (bekas), Tahun pembuatan: 2001, Tahun Pembuatan: 2001-2003 Ukuran: maks. 290 x 420 x 65 mm; min. 100 x 105 x 3 mm Kapasitas: maks. 15.000 lembar/jam Perlengkapan Mesin perakitan • Elemen penegang • 12 stasiun • ZU 840 • 8 pengumpan lembaran STA 840 • Pengeluaran lembaran AS 840 Kontrol • Sistem pengenalan tepi lembaran Opticontrol Komponen antara • Pengalih pengeluaran • Elemen getar Mesin pengikat lem • Copilot • Kontrol monitor • 23 penjepit • Stasiun getar • Meja istirahat • Stasiun penekan lipatan • Stasiun pemotongan dan pengkasaran • Perataan • Unit perekat punggung hotmelt • Unit perekat sisi hotmelt • 2 unit pemanas awal • Pengumpan sisipan lembaran • Penekanan sisipan • Sabuk rantai untuk penataan lembaran Area pendinginan • Pengeluaran untuk gergaji pemotong Gergaji pemotong • Sabuk pembalik • Terintegrasi dengan Pemotong tiga sisi • Pemisah • Info pemotong: HD 151 P Pengatur silang • Info pengatur silang: Müller Martini CB 16 Aksesori standar • Generator vakum untuk pencetakan DV Nledoiz Aibspfx Aivog • Diagram kelistrikan • Katalog suku cadang • Peralatan standar Informasi tambahan • Mesin dapat diperiksa saat beroperasi • Kondisi: siap untuk produksi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, jam operasional: 1 h, en-001 Nsdpfx Aetnz Hbsivjlg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 400 t, Hidrobrasil Four-Column Press – 400 t – 2,700 × 1,700 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from the manufacturer Hidrobrasil, offering a pressing force of 400 t. Designed for continuous shift operation, this machine features a powerful twin-cylinder design with piston accumulator for exceptionally dynamic operation combined with efficient energy use. Thanks to extensive automation and adjustment options, this press is ideally suited for demanding production and forming processes. ===== Technical Data & Information: Hydraulic Four-Column Press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Type: Hydraulic column press - Machine designation: Production press - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 52 t Nlsdpfeg Iihwjx Aivsg - Overall height: approx. 5,700 mm - Number of operator sides: 2 ==== Working Area - Max. opening: 1,600 mm - Stroke: 1,000 mm - Min. opening: 600 mm - Table height above floor: 820 mm - Minimum tool height: 600 mm ==== Table & Ram - Table size (clamping surface): 2,700 × 1,700 mm - Total table size: 3,400 × 1,700 mm - Ram size: 3,400 × 1,700 mm - Column diameter: 250 mm - T-slots: 28 mm (as per customer specification) - Table plate milled flat ==== Speeds - Closing speed: 100–450 mm/s - Opening speed: 50–250 mm/s - Pressing speed: 5–60 mm/s ==== Hydraulics & Drive - Hydraulic components: Bosch Rexroth / Parker / HAWE - Main motor output: 90 kW - Piston accumulator with approx. 4 nitrogen bottles - Circulation oil cooling (adjustable) - Pressure-holding valve: 0–600 sec. - Pressure build-up time: max. 2 sec. - Pressure precision: ± 5 bar ==== Control & Operation - Control: Siemens S7-1500 - Touchscreen: 15" Siemens - Operator panel: swiveling - Operating modes: Setup, single stroke, continuous stroke, program operation - Pressure adjustment: 50–400 t via touchscreen - Stroke limitation via pressure or position - Free positioning of ram - Siemens remote maintenance unit (SECOMEA Ethernet) ==== Equipment - Automatic lubrication (adjustable) - Oil temperature monitoring (adjustable) - KEYENCE light curtains (14 mm) front and rear - Safety components from SICK - Side-protected doors with monitoring (1,200 × 1,000 mm) - Two-hand control units on both sides - Prepared for automatic material feeding - RITTAL control cabinet (can be positioned up to 20 m away) - Stress-relieved components (table, ram, press head) - Machine body primed and painted ==== Accuracy - Parallelism deviation: ± 0.1 mm - Deflection: ≤ 0.17 mm/m ===== Forming technology, deep drawing, pressing operations, series production, large part manufacturing, automated production Hydraulic press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards.