Beli Dalex Drs 8 bekas (36.362)

Kondisi: sangat baik (bekas), Projection welding machine Manufacturer: DALEX Type PM 32-5 Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 80 kA Secondary open-circuit voltage: 9.75 V Hodpfjwhz Ilex Aanenl Electrode force: 215–1,290 daN Single-stroke cylinder – electrode stroke 100 mm Throat depth: 250 mm with attached control cabinet according to VDE 0100 Main switch Synchronous welding control MPS 200 Sample photo The machine is currently being overhauled

Kondisi: sangat baik (bekas), Pneumatically operated, water-cooled 3-phase direct current spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Arm reach: 650 mm with special cylinder for low pressure range from 20–120 daN Rated power at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V Equipped with control cabinet mounted according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Hodpfxeu A Dg Es Aanjnl Weight: 685 kg

Kondisi: sangat baik (bekas), Combined spot and projection welding machine Manufacturer: DALEX Model: PMS 11-4 Version "B" Throat depth: 350 mm Rated output at 50% duty cycle: 100 kVA Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15-4.33 V Electrode force: 190-1140 daN with 4-step switch Attached control cabinet according to VDE 0100 with main switch Synchronous welding controller with monitoring function MPS 8043-1 IQ1 Selector switch for operation with two-hand safety start panel and foot pedal Hnjdpfxewz Rz Is Aansl Sample photo Machine is currently being reconditioned

Kondisi: sangat baik (bekas), Longitudinal seam welding machine, roller seam design Manufacturer: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet in accordance with VDE 0100 Main switch Synchronization welding control 8036 Weight: 635 kg Sample photo Hnsdpfx Aaetxl Ivenel Machine is currently being refurbished

Kondisi: sangat baik (bekas), Mesin las titik dengan silinder stroke tunggal dan pemegang elektroda flensa atas dan bawah Merek: DALEX Tipe: PMS 14-3 Jarak pengelasan: 350 mm Daya nominal pada 50% ED: 80 kVA Arus hubung singkat sekunder: 54,5 kA Tegangan tanpa beban sekunder: 7-14 V Gaya elektroda: 80-1.200 daN dilengkapi dengan: Sakelar 8 langkah Sakelar utama Lemari kontrol tambahan HARMS+WENDE Kontrol pengelasan sinkron MPS 200 8 program pengelasan Hnsdotuwz Iepfx Aanjl Plat tipe AEG Mulai dengan pedal kaki

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 415 mm, Water-cooled, pneumatically operated spot welding tongs Make: DALEX Type: A 3139-S2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8 kA Secondary open-circuit voltage: 2.9 V Electrode force: 300 daN Equipped with universal suspension and suspension bracket 10 m connection cable Synchronised welding control RS 15 1 pair of electrode arms, 415 mm throat depth – upper arm 245/55-1 K, lower arm V 20//415 S Hsdpfjtdnqzox Aansnl

Kondisi: sangat baik (bekas), Pneumatically operated, water-cooled spot welding gun for industrial use Type: DALEX 3427 D Rated output at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Hodpfegibv Eex Aanenl Electrode force: 580 daN Equipped with double-stroke cylinder – long stroke 62 mm – pre-stroke 40 mm Working stroke with adjustable lift: 0-22 mm With cardan suspension and mounting bracket 10 m power supply cable and control lead Electrode arms: 350 mm Arm spacing: 170 mm With synchronous welding controller 15036

Kondisi: baru, Tahun pembuatan: 2020, Model: KPZ-2 Type: Enclosed Working Dimensions: 900 mm W x 1300 mm H x 900 mm D External Dimensions: 980 mm W x 2100 mm H x 1600 mm D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50–60 Hz Hnodpeb Al Sbsfx Aanol Filter: Polyester Number of Filters: 3 Filter Surface Area: 22.5 m² Fan: Aluminium Fan Noise Level: 74 dBa Air Consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, en Hnedpfxsw Ewl Ue Aanol

Kondisi: bekas, Veeco Dektak 8 Hnedpfx Aowr A Smeanol In working condition and calibrated.

Kondisi: baru, Tahun pembuatan: 2017, Vibration motor, vibrator motor, shaker motor, unbalance motor, vibrating motor Friedrich, type: F 4000-8-9.0 Hsdpfogt Awzox Aanenl Maximum centrifugal force: 120,000 N Speed: 740 rpm Power consumption: 7 kW Dimensions: 1130 x 450 x 465 mm (LxWxH) Weight: 600 kg

Kondisi: sangat baik (bekas), Catalogue number: 7715 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm, 7.5 kW 3) Left vertical 130 mm, 7.5 kW 4) Right vertical 130 mm, 5.5 kW 5) Top horizontal 220 mm, 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm, 5.5 kW 7) Bottom horizontal 220 mm, 5.5 kW Hnedpfxjy Ry Uio Aanjl – 7th spindle with support and Jointer system (cutterhead sharpening) 8) Universal 220 mm, adjustable 360°, 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter 40 mm – Top side: - 6 infeed feed rollers, double-geared + 1 single - 3 outfeed feed rollers, rubber, smooth, double + 3 single - Metre counter – Underside: - Infeed roller, geared, driven, rotatable on lower table - 3 metal feed rollers, smooth - Feed on cardan rollers - Pneumatically loaded feed rollers - Stepless feed speed adjustment + 2 speeds: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5x 140 mm, 3x 120 mm - Machine dimensions (L/W/H): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg ADVANTAGES – 8 cutterheads – Universal spindle – Perfect for wet and dry timber – German-made, WEINIG brand – Unpainted – Very few operating hours – Used planer, in excellent condition Net price: PLN 165,900 Net price: EUR 39,500 depending on the rate of 4.2 EUR (Prices may vary with exchange rate fluctuations)

Tahun pembuatan: 2024, Kondisi: baru, Everything can be configured according to your requirements, with very short production and delivery times. We are happy to provide further information upon request. Technical specifications available on request. Standard Equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Back gauge with motor, linear guide, and ball screw Back gauge stop fingers with height adjustment (R-axis, manual) Upper die clamping system, CE compliant Front support arms for sheets, sliding (with T-slot and stops) Special hydraulic blocks and valves according to worldwide standards Electrical equipment in compliance with international standards Optional Accessories: Hedpefiqdcjfx Aanonl D-BEND software for 3D bending simulation and alignment CNC-controlled R-axis (X = 650mm), X, R (double guide, aluminum) Upper dies, CE compliant Lower dies, CE compliant Lower dies, by DURMA Quick die clamping system CNC-controlled crowning with motor Back gauge (1000 mm) – rear safety with light barrier Oil cooler Additional stop finger and additional front support system for sheets, sliding Special overseas packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in research and production of sheet metal processing machinery, and an annual output of 8,000 machines manufactured at three technologically advanced production facilities totaling 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally recognized manufacturers in the industry, selling products in 120 countries worldwide. With our branch office in Staufenberg near Gießen, Durma Maschinen GmbH is now an integral part of the Central Hessen region. We are your direct point of contact from within Durmazlar, offering you expert assistance for all sheet metal processing machinery needs. Our demonstration center gives you the opportunity to inspect our machines on site, experience the high quality and precise technology firsthand, and receive tailored advice aligned with your business goals. Our mission is to be your local, direct contact and provide you with services including training and customer support. We are happy to support you from Germany through the entire lifecycle of your machine – from consultation to purchase and beyond. With our German branch, we are always close by and ready to respond quickly and efficiently when you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Tahun pembuatan: 2024, Kondisi: baru, Everything is configurable upon request, with very short production and delivery times. Further information is available upon request. Technical data available on request. Hnodpofiryfsfx Aansl Standard Equipment Y1, Y2, X, R – 4 axes Control unit – CNC ModEva15T Servo motor backgauge & linear-guided ball screw system (X-R) CNC crowning system European-style tool clamping system Movable support arms (with T-slot and stops) Specially designed hydraulic manifold and valve system to global standards Electrical equipment compliant with international standards Optional Equipment Control unit – ModEva Premium, 69T and 66T CE Manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (Safety PLC) CE BLVT Safety – for tandem machines only Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC-controlled X axis = 1000 mm – rear protection with light barrier AP3-AP4 bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Tool parking area Central lubrication system Oil cooler Additional backgauge fingers and additional movable support arms Special packaging for overseas transport

Kondisi: baru, Everything can be configured as desired, with very short production and delivery times. Further information available on request. Technical data upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor, linear guide, and ball screw Backgauge stop fingers with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special versions, compliant with global standards Electrical equipment, compliant with global standards Optional equipment: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650 mm), X, R (double guide, aluminum) Upper dies, CE Lower dies, CE Lower dies by DURMA Quick-release die clamping system CNC-controlled, motorized crowning Hedpfjfiqa Rjx Aanenl Backgauge (1000 mm) – rear safety guard with light barrier Oil cooler Additional stop fingers & additional front sliding support system for sheet metal Special overseas packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and manufacture of sheet metal processing machines, an annual output of 8,000 machines produced in three technologically advanced manufacturing plants covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are among the internationally renowned manufacturers in the industry, with products sold in 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from the Durmazlar team, offering expert advice and support in all matters concerning sheet metal processing machinery. Our demonstration center allows you to experience our machines firsthand, witness the quality and precision technology of our products up close, and receive the best possible consultation tailored to your business goals. Our mission is to be your direct point of contact onsite and to provide you with comprehensive services, including training and customer support. We are happy to assist you from our location in Germany—from initial consultation, through purchase, and throughout the entire lifetime of your machine. With our German branch, we are always on site when you need us, enabling us to respond quickly and efficiently. We are your reliable partner for high-tech solutions in sheet metal processing.

Kondisi: baru, Tahun pembuatan: 2024, Are you looking for a high-performance press brake that can handle even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3,000 tons of pressing force could be the perfect solution for your needs. Hedpfsi Da Sysx Aanonl With an impressive 8-meter working length and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with maximum precision. The 1,000 mm installation height allows flexible and convenient positioning of the workpiece. At the heart of the machine is the movable DELEM DA-66T control unit, providing intuitive operation and precise control of the workflow. Additionally, this press brake is a customized, special-build unit and can be configured to meet all individual requirements according to customer specifications. If you are interested in the Durma press brake, we are happy to offer you personalized consultation. Other machines are also available and can be inspected on-site. Please feel free to contact us for further information so we can find a customized solution tailored to your needs. Control type: DELEM DA-66T Protective oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet support systems: Movable support arm Stroke: 750 MM Backgauge type: X=1500 X, R Throat depth: 1,050 MM Crowning: Hydromechanical Installation height: 1,000 MM Power supply: 400V 50Hz Frame type: Welded frame Lower tool holder: DURMA wide

Kondisi: baru, Tahun pembuatan: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Further information is available upon request. Technical specifications available on request. AD-R 80400 Bending force: 400 tons Bending length: 8,050 mm With over 60 years of experience in the research and production of machinery for sheet metal processing, an annual output of 8,000 machines from three technologically advanced production plants covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally recognized manufacturers in their sector, with products distributed in 120 countries. Hsdofin N Sspfx Aanjnl With our branch office in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hessen region. Here, we are your direct point of contact from Durmazlar, offering comprehensive support and expertise when it comes to sheet metal processing machinery. Our demonstration center enables you to get an on-site overview of our machinery, experience first-hand the quality and precise technology of our products, and receive tailored advice focused on your business objectives. Our mission is to be your direct local contact, providing professional services in training and customer support. We are pleased to support you from Germany—starting with consultation, throughout the purchasing process, and for the entire lifetime of your machine. With our German subsidiary, we are always on-site when you need us to respond quickly and efficiently. Here, we are your reliable partner for cutting-edge technological solutions in sheet metal processing.

Kondisi: baru, berat kosong: 7.300 kg, berat muatan maksimum: 23.700 kg, berat keseluruhan: 31.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 8.000 mm, lebar ruang muat: 2.550 mm, suspensi: udara, ukuran ban: 235 / 75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: M302, Used Monoblock Isobaric Filling Line Filltec 8000 bph – Overview Used isobaric filling monoblock Filltec Varifill32/8 (year of manufacture 2006), complete with AROL crowner. This pre-owned system is designed for beverage production of carbonated and still products and delivers a nominal speed of 8,000 bottles per hour. Equipped with 32 original mechanical filling valves and an 8-head, 26 mm aluminum crown capper, it is a robust solution for a used bottling line in modern industrial packaging environments. Rotation direction: clockwise. Item no.: M302. Technical Specifications & Performance Data Key Data Manufacturer / Model: Filltec Varifill32/8 Technology: Isobaric rotary filler with mechanical valves Year of manufacture: 2006 Condition: In operation (used / second-hand) Nominal output: 8,000 bph Products: Carbonated and still beverages Handled formats: 5 formats Bottle diameter range: 60–80 mm Rotation direction: Clockwise Aseptic design: No (standard isobaric) PLC: SIEMENS S7 – 300 Filling and Capping Groups Filler: 32 original mechanical filling valves Cap type: 26 mm aluminum crown cap Supplied blocks: Filler + capper (no rinser) Electrical Specifications Main power supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth) Auxiliaries: 24 VDC Instrument voltages: 24 VAC – 230 VAC Protection class: IP54 (machine and motors) Advanced Automation and Control Systems The monoblock uses an industrial control architecture based on 24-VDC auxiliaries and separate power/instrument circuits for stable operation. IP54 protection on enclosure and motors supports reliable performance in beverage production environments. Interlocked safety guards and standard safety circuits ensure compliant operation within a used filling line. Process Control Advantages Isobaric filling for consistent product quality of carbonated beverages Mechanical filling valves designed for repeatable volumetric accuracy Synchronization of AROL capping turret with filler for secure application of 26 mm crown caps Production Line Integration Options This monoblock is ready for integration into existing used or new industrial packaging systems. Connectivity and Interfaces Hnjdpfx Ajyhcgneanol Upstream compatibility: Infeed conveyors, standalone rinsers or blowers (not included) Downstream compatibility: Conveyors to labellers, inspectors, packers, and palletizers Format handling: Starwheels and guides for bottle diameters from 60 to 80 mm in 5 formats Utilities: Single 400 V 50 Hz mains supply with 24 VDC auxiliaries according to specification Machine Condition and Maintenance History Operating status: In production Original equipment: 32 mechanical filling valves remain...

Kondisi: bekas, 4 unit penggiling Lebar penggilingan 1.300 mm Tinggi penggilingan maks. sekitar 140 mm Mesin penggiling permukaan multifungsi dengan kontrol frekuensi atau mesin penggiling silang 2 sabuk Heesemann MFA 8 untuk penggilingan bahan berbasis kayu datar dan/atau benda kerja berlapis (pengamplasan intermediate lacquer) dengan karpet vakum dan banyak pita penggiling. Hnjdpfx Aasxr N I Ejnjl Unit 1: Balok tekan elektronik Unit 2: Penggilingan melintang Unit 3: Penggilingan memanjang Unit 4: Sikat pembersih

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 142 h, nomor mesin/kendaraan: 0775300101L000168, 1 Hjdpouvb Ncjfx Aanjnl

Kondisi: bekas, Tahun pembuatan: 2014, nomor mesin/kendaraan: CE803910, tinggi angkat: 8.000 mm, de-001 Hedeyw E Tdspfx Aansnl

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 253 h, nomor mesin/kendaraan: CE155501, de.001 Hnedpfxsyxvtqs Aanel

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 109 h, nomor mesin/kendaraan: CE805712, tr-001 Hnsdpfeyxvunjx Aanel

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 1.644 h, nomor mesin/kendaraan: CE145892, 1 Hsdpfx Ajyyufnjansnl