Beli Dalex Tk 42 bekas (5.725)

Kondisi: sangat baik (bekas), Tang las titik udara bertekanan dan berpendingin air Merek: DALEX, Tipe 3328-4 dengan katup magnet 5/2 - silinder double stroke dengan langkah panjang 60 mm, pra-langkah 40 mm Langkah kerja dengan pengaturan langkah 0-20 mm Daya terukur pada 50% siklus kerja: 25 kVA Arus hubung singkat sekunder: 16,5 kA Tegangan tanpa beban sekunder: 4,7 V Gaya elektroda: 280 daN Jarak antar lengan: 140 mm Jangkauan lengan: 500 mm dengan suspensi kardanik dan gantungan suspensi Kabel sambungan dan kabel kontrol 10 m Bonus: kontrol pengelasan berdiri sendiri MPS 15036 Rodpfx Aloxywt Eeaet dengan sakelar utama sesuai VDE 0/100

Kondisi: sangat baik (bekas), Longitudinal seam welding machine, roller seam design Manufacturer: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet in accordance with VDE 0100 Main switch Synchronization welding control 8036 Weight: 635 kg Sample photo Redpfetxl Ivsx Alaot Machine is currently being refurbished

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 415 mm, Water-cooled, pneumatically operated spot welding tongs Make: DALEX Type: A 3139-S2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8 kA Rodpotdnqzsfx Alast Secondary open-circuit voltage: 2.9 V Electrode force: 300 daN Equipped with universal suspension and suspension bracket 10 m connection cable Synchronised welding control RS 15 1 pair of electrode arms, 415 mm throat depth – upper arm 245/55-1 K, lower arm V 20//415 S

Kondisi: sangat baik (bekas), High-performance spot welding gun with double-acting cylinder Manufacturer: DALEX Type: 3528-4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder with long stroke 62 mm, pre-stroke 40 mm Working stroke with adjustable stroke range 0-22 mm Equipped with 5/2-way solenoid valve Cardan suspension and suspension bracket 10 m connection cable with control wire Arm reach: 170 mm Arm spacing: 170 mm Rsdpfx Aoki Tkpolajt Complete with 1 pair of electrode arms, straight, top and bottom, 170 mm Synchronous welding control MPS 1036 Sample photo

Kondisi: sangat baik (bekas), Water-cooled, hand-operated DALEX spot welding gun Model 3218 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Redpfx Ajf Hi A Ejlast Equipped with cardan suspension and suspension bracket 1 pair of electrode arms with 170 mm throat depth Included: DALEX synchronous welding controller RS 12 Power control via phase angle control Current time 1–99 periods, synchronous With connection cable and 32 A CE plug and main switch

Kondisi: baik (bekas), daya nominal pada siklus kerja 50%: 8 kVA, - Capacity: 8 kVA - Timer Rsdpovbr Dlsfx Alajt - 380V

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 03, berat keseluruhan: 350 kg, lebar total: 130 mm, tinggi total: 1.800 mm, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, Wir verfügen über 17 Sätze NF42 4/54, 2/130, 2/84, 2/66, Baujahr 1987–2005. Ausstattung: - Doppelte Eisenwalze Redpfxsu A Ir Eo Alast - Gummipresser - 16–20 Schaftmaschinenrahmen - Garnbinder mit Binderfadenbewegung - 6 Kontaktleisten und Stillstandsanzeige - 2 Schusseintrag-Transportsysteme Zustand: Gereinigt und überholt, getestet nach Reparatur

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer these ready-to-use AUMA actuators and JC Spain gate valves, ranging from 10" to 42", fitted with actuators, model "Valves for Oil Industry", year of manufacture 2016. Redpfxsy D Ilie Alajt High-performance gate valves: - Sizes: 10" to 42" - Pressure class: 600 lbs, Stellite 6 hard facing and 13% Cr trim - BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y - ASTM A-216 WCB (cast carbon steel) Most units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and perform a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator ● 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. ● 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. ● 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. ● 30" gate valves (2 units): handwheel (can be retrofitted with actuator). ● 16" gate valves (9 units): equipped with AUMA SAEX 14.6 / GK30.2 Germany actuators (Ex-proof). ● 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or require further information, please feel free to write us a message or call us.

Kondisi: bekas, berat kosong: 4.260 kg, berat muatan maksimum: 9.740 kg, berat keseluruhan: 14.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 05/2017, panjang ruang muatan: 5.050 mm, lebar ruang muat: 2.420 mm, suspensi: baja, ukuran ban: 385/55R19,5 156J, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 385/55R19,5 156J, ukuran ban belakang: 385/55R19,5 156J, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, luas filter: 20 m², kapasitas hisap: 3.500 m³/jam, tekanan negatif: 3.000 Pa, Ekstraktor asap las mobil, ekstraktor debu, filter pembersih otomatis, pneumatik, vakum TEKA. Model: TK-PF Unit filterasi dan ventilasi bergerak. Untuk pengelasan, penggerindaan, dan semua jenis debu kering. Filter dibersihkan secara pneumatik dengan semburan udara bertekanan saat beroperasi, sehingga menghasilkan efisiensi perangkat yang tinggi. Kipas daya 1,1 kW – tiga fasa Kapasitas maks – 3500 m3/jam Tekanan negatif maks – 3000 Pa Rodpfx Asy Hq Rtolaet 2 lengan ekstraksi panjang 4,00 m. nomor stok – 1106

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY Redpfxeyw H Szj Alast - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 30.000 h, CNC turning machine Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 CNC Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current consumption: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Collet capacity: 42 mm Chuck diameter: 150 mm Maximum workpiece length (with collet): 381 mm Maximum workpiece length (with chuck): 270 mm Maximum turning diameter: 309 mm X-axis travel: 189 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Tool turret: 12 stations VDI 30 Indexing time: 0.1 s Redpfx Aoxflprolast Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF SUPPLY Includes (not limited to): CNC Turning Machine Hardinge Quest 6/42 SP Toolholder set Chip conveyor Transformer Chip tray Renishaw probe Exact scope of supply as per photo documentation The CNC turning machine Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control from 2007 is a high-precision machine for versatile turning applications. It features a rigid A2-5 spindle mount, a collet capacity of 42 mm, and a 150 mm chuck, allowing for flexible machining of various workpiece sizes. With a maximum turning diameter of 309 mm, larger components can also be machined reliably. The axes offer generous travel ranges of 189 mm (X) and 406 mm (Z) as well as fast rapid traverse rates for maximum productivity. The 12-position VDI 30 tool turret, with an ultra-short indexing time of 0.1 seconds, ensures quick tool changes and minimizes downtime. Thanks to its robust construction and proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for batch production with the highest accuracy requirements. No guarantee is given for the accuracy, completeness or timeliness of the information.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Pipe diameter 42.0 mm steel Wall thickness 3.0 mm steel Pipe diameter 54.0 mm CU/Alu Wall thickness 2.0 mm Solid material - diameter 30.0 mm Revolutions per minute 2.0 rpm Voltage 230 Volt Control system ERCOLINA Total power requirement 1.1 kW Weight approx. 75.0 kg Dimensions (L-W-H) 410 x 1000 x 570 mm Current new price incl. accessories ~ 10,000 EUR Like-new condition Special price upon request ERCOLINA MediBender "MB 42" - Capacity steel pipe 42 x 3.0 mm Rodpfey Ig R Ssx Alast - Capacity gas pipe 1"1/4 gas x 3.5 mm - Capacity square tube (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - Hexagon tool holder - Min. external diameter 5 mm - 1/8" gas Equipment: - Patented quick-change tool system - Single bending speed - Mobile foot switch - Mobile stand (custom-made) * Bending tools included in the delivery: - Ø 20 slide shoe + new bending segment R 67 mm - Ø 32 slide shoe + new bending segment R 82 mm - Ø 35 slide shoe + new bending segment R 90 mm - Ø 42 slide shoe + new bending segment R 130 mm - Ø 26 slide shoe without bending segment * The bending segments are on order * Approximate delivery end of MAY 2026

Kondisi: baru, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 4.400 mm, panjang total: 4.000 mm, - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of hydraulic valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded (kg): 10,780 / 1,360 - Axle load unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt (α/β °): 6/12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1,000 x 1,200 crossways (AST mm): 4,597 - Aisle width for pallets 800 x 1,200 lengthways (AST mm): 4,797 - Turning radius (mm): 2,830 - Minimum pivot point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Tractive force loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 Rjdpfx Aloy E Uf Ssajt - Emission level according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 - Drive type: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Tow hitch type: DIN 15170 Pin

Kondisi: bekas, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 4.000 mm, panjang total: 4.000 mm, - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of hydraulic valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm Rodpfxoy E Uape Alast - Load distance: 567 mm - Axle load loaded (kg): 10,780 / 1,360 - Axle load unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt (α/β °): 6/12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1,000 x 1,200 crossways (AST mm): 4,597 - Aisle width for pallets 800 x 1,200 lengthways (AST mm): 4,797 - Turning radius (mm): 2,830 - Minimum pivot point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Tractive force loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission level according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 - Drive type: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Tow hitch type: DIN 15170 Pin

Kondisi: bekas, berat kosong: 3.130 kg, berat muatan maksimum: 8.770 kg, berat keseluruhan: 11.900 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 12/2015, inspeksi berikutnya (TÜV): 09/2027, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 1.500 mm, volume ruang muat: 18 m³, suspensi: baja, ukuran ban: 235/75R17,5 143J, jarak roda: 990 mm, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235/75R17,5 143J, ukuran ban belakang: 235/75R17,5 143J, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pelletpresse Hersteller – TEKNO UNO Modell – TK 304 Baujahr – 2014 Motorleistung – 50 kW Kapazität – 450 kg/h Rjdpfx Ajvdrtxolajt

Kondisi: baik (bekas), Tahun pembuatan: 1988, jam operasional: 16.246 h, kapasitas angkut: 1.500 kg, tinggi angkat: 3.700 mm, jenis bahan bakar: gas, tipe tiang: dupleks, berat kosong: 2.760 kg, jarak tempuh: 16.246 km, Forklift duplex LPG Merek Toyota, Tahun 1988. Berjalan dan mengangkat dengan baik, tanpa kebocoran. Kapasitas 1.500 kg. Ketinggian angkat 3.700 mm. Tinggi jalur xxx. Dilengkapi dengan SIDESHIFT. Tonton videonya di YouTube. Rsdpfx Aoy Exnkslajt

Kondisi: baik (bekas), Tahun pembuatan: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Rjdpfx Aloy Ed E Ujaet Control type: CNC Control system: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Rotation speed: 8,000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4,000 rpm Clamping diameter: 42 / 65 mm Spindle diameter at front bearing: 110 mm Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse speed X axis: 15 m/min Rapid traverse speed Y axis: 6 m/min Rapid traverse speed Z axis: 30 m/min Space requirements (LxWxH): 4,354 x 2,076 x 1,917 m Turret slide cross-section (Turning and milling support): 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5,000 N Feed travel X-axis: 140 mm Feed travel Z-axis: 450 mm Feed travel Y-axis: 35 mm Ballscrew Z axis (ø x pitch): 32 x 10 mm Ballscrew X axis (ø x pitch): 32 x 5 mm Ballscrew Y axis (ø x pitch): 25 x 5 mm Additional information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh - Driven tools: Yes Machine can be inspected under power by prior arrangement.

Kondisi: bekas, jarak tempuh: 352.500 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 12/2013, jenis bahan bakar: diesel, berat keseluruhan: 10.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 11/2026, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, lebar total: 2.600 mm, tinggi total: 3.500 mm, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.460 mm, tinggi ruang muatan: 2.290 mm, Perlengkapan: ABS, filter jelaga,

Kondisi: baik (bekas), hydraulikaggregat_rexroth_ahag_abb11kw Rodpfx Alsy D Hhvoaet

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 14 kVA Rated current: 20 A Travel distances (axis stroke): X1: 170 mm Z1: 200 mm X2: 110 mm Z2: 395 mm X3: 110 mm Z3: 170 mm Y: +/-40 mm Rapid traverse speed: X1: 24 m/min Z1: 24 m/min X2: 18 m/min Z2: 24 m/min X3: 20 m/min Z3: 24 m/min Y: 12 m/min Max. tool shank diameter with driven tool holders: Drill/tap shank: diameter 7 mm, diameter 10 mm, diameter 13 mm, diameter 63 x diameter 16 mm for slot milling cutters. Max. thread cutting diameter for rotating tool: M10 Redpfx Aey Ipyiolaet Tool spindle speed: 45 - 4500 rpm Max. clamping diameter of sub-spindle: 42 mm Max. workpiece length for front-side machining in sub-spindle: 120 mm Max. workpiece overhang from sub-spindle: 80 mm Max. axial thread cutting diameter, backside machining: 12 mm diameter Max. thread cutting diameter, backside machining: M10 Sub-spindle speed: 60 - 6000 rpm Sub-spindle speed feed: stepless Sub-spindle C-axis accuracy: 0.001° Sub-spindle indexing angle: 15° Number of tool holders mountable per turret: 12 pcs Number of turret stations: 36 All turret stations are live (driven) Tool size: 16 x 16 x 90 mm Tool holder: VDI 20 Max. machining diameter: 42 mm / 140 mm Min. material diameter: 10 mm Max. machining length: 75–120 mm depending on workpiece shape Max. diameter of axial drilling: 16 mm Max. diameter of axial thread cutting: M12 Spindle through-hole diameter: 43 mm Main spindle speed: 80–8000 rpm Main spindle accuracy: C-axis: 0.001° Max. drill diameter for rotating tool: 10.5 mm. In addition to the C-axis, there is a 15° inclination programmable via the S-axis. The machine is equipped with a KNOLL chip conveyor and an FMB TURBO 5-55 bar feeder. Also included are numerous VDI 20 tool holders, consisting of approx. 10 driven tool holders.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2482758, Tahun pembuatan: 2021, kapasitas angkut: 5.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, pusat beban: 500 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.940 mm, daya: 54,4 kW (73,96 hp), produsen motor: Kohler, tipe perpindahan gigi: hidrostatik, lebar kerangka garpu: 1.380 mm, panjang garpu: 1.200 mm, lebar garpu: 150 mm, ketebalan garpu: 55 mm, radius putar (dalam): 2.830 mm, ukuran ban depan: 300x15, ukuran ban belakang: 700-12, berat keseluruhan: 7.150 kg, tinggi total: 2.940 mm, panjang total: 3.000 mm, lebar total: 1.480 mm, warna: oranye, Perlengkapan: garpu palet, kabin, Technical Specifications - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Cab roof made of plastic, with heater - Number of valves: 3 - Rated capacity/load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load, loaded (kg): 10,780 / 1,360 - Axle load, unloaded (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/carriage tilt α/β (°): 6/12 - Seat height (related to SIP/stand height) (mm): 1,315 - Coupling height (mm): 380 Redoyqzlnopfx Alaot - Aisle width for pallets 1000 x 1200 crosswise (Ast) (mm): 4,597 - Aisle width for pallets 800 x 1200 lengthwise (Ast) (mm): 4,797 - Turning radius (mm): 2,830 - Lift height: 3.00 m - Minimum turning point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22/24 - Lifting speed loaded/unloaded (m/s): 0.45/0.49 - Lowering speed loaded/unloaded (m/s): 0.38/0.26 - Drawbar pull loaded/unloaded (kN): 28/21 - Gradeability loaded/unloaded (%): 20/20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission stage according to EU Regulation 2016/1628: Stage III a - On-board voltage (V): 12 - Type of drive unit: Torque converter - Operating pressure for attachments (bar): 200 - Oil flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Trailer coupling type: DIN 15170 pin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2482768, Tahun pembuatan: 2021, kapasitas angkut: 4.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.940 mm, daya: 54,4 kW (73,96 hp), produsen motor: Kohler, tipe perpindahan gigi: hidrostatik, panjang garpu: 1.200 mm, ukuran ban depan: 300 x 15, ukuran ban belakang: 7.00-12, berat keseluruhan: 7.150 kg, tinggi total: 2.940 mm, panjang total: 3.000 mm, lebar total: 1.480 mm, warna: oranye, Perlengkapan: garpu palet, geser samping, kabin, lampu depan tambahan, pelindung depan, Technical data - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Plastic cabin roof, heater - Number of valves: 3 - Rated lifting capacity/load: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded kg: 10,780/1,360 - Axle load unloaded kg: 3,300/4,060 - Track width mm: 1,180 - Track width mm: 1,190 Rjdpeyqyrmjfx Alaot - Mast/Carriage tilt forward/backward α/β °: 6/12 - Seat height relative to SIP/stand height mm: 1,315 - Coupling height mm: 380 - Aisle width for pallets 1000 x 1200 (crosswise) Ast mm: 4,597 - Aisle width for pallets 800 x 1200 (lengthwise) Ast mm: 4,797 - Turning radius mm: 2,830 - Lifting height: 3.00 m - Minimum turning point distance mm: 900 - Travel speed loaded/unloaded km/h: 22/24 - Lifting speed loaded/unloaded m/s: 0.45/0.49 - Lowering speed loaded/unloaded m/s: 0.38/0.26 - Traction force loaded/unloaded kN: 28/21 - Gradeability loaded/unloaded %: 20/20 - Service brake: Mechanical/hydraulic - Rated engine speed l/min: 2,200 - Number of cylinders: 4 - Displacement cm³: 2,482 - Emission stage according to EU Regulation 2016/1628: Stage III a - On-board voltage V: 12 - Type of drive unit: Torque converter - Working pressure for attachments bar: 200 - Oil flow for attachments L/min: 101 - Fuel tank capacity: 90 - Tow coupling type: DIN 15170 pin - Fully functional, general signs of use

Kondisi: bekas, jarak tempuh: 155.455 km, daya: 132 kW (179,47 hp), pendaftaran pertama: 12/2020, jenis bahan bakar: diesel, berat kosong: 3.990 kg, berat muatan maksimum: 3.210 kg, berat keseluruhan: 7.200 kg, konfigurasi gandar: 4x2, jarak roda: 3.750 mm, inspeksi berikutnya (TÜV): 02/2027, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 3, volume ruang muat: 19 m³, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.040 mm, tinggi ruang muatan: 2.230 mm, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kopling trailer, pendingin udara,