Beli Euchner Eks Dudukan Kunci bekas (5.056)

Kondisi: bekas, Elastomer Test Stand BIA Turnkey Test Systems Hexapod Item No.: PT-065 Designation: Elastomer Test Stand Manufacturer: BIA Turnkey Test Systems Description: Test stand for determining and analyzing mount characteristic curves and values at vehicle operating points mount characteristic curves and values at operating points under specified temperature conditions mount behavior under operational loading (compression set, change in characteristic curves) functional noises at operating points on elastomer mounts in the chassis/drivetrain area Test specimens are clamped between an upper fixed plate and a lower mobile plate. Giodowhdnhopfx Ahbow The mobile plate is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows the distance between the two plates to be adjusted, enabling a wide variety of test specimens and fixtures to be clamped. Degrees of freedom Amplitude Speeds Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder is fitted with two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods are equipped with a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear Actuator: The distance between the upper and lower plates can be adjusted by means of a linear actuator. The actuator consists of an electric motor, a gearbox, and a leadscrew system. The linear actuator is fitted with an absolute encoder, which is mounted on the gearbox input shaft. Hydraulic Actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 1.635 h, kapasitas angkut: 1.200 kg, tinggi angkat: 8.310 mm, pengangkatan bebas: 810 mm, pusat beban: 5.000 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 4.650 mm, daya: 9,5 kW (12,92 hp), kapasitas baterai: 620 Ah, berat baterai: 933 kg, panjang garpu: 800 mm, lebar garpu: 100 mm, ketebalan garpu: 40 mm, berat keseluruhan: 3.804 kg, berat kosong: 2.871 kg, tinggi total: 4.650 mm, panjang total: 2.075 mm, Perlengkapan: garpu palet, kabin, pencahayaan, Forklift listrik – pemilih pesanan. Data teknis terlampir. Godpfx Ahozhgm Rsbeiw

Kondisi: bekas, Striking ring spanner. 5134 Manufacturer: Stahlwille Gsdpedbc E Dsfx Ahbjiw 120 mm, 85 mm and 115 mm spanners also in stock.

Kondisi: baik (bekas), Quadruple tool holder Tool height: 60 mm Gjdsdcwzuopfx Ahboiw Dimensions: L 190 x W 185 mm

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), Tersedia unit filtrasi ultra-halus kompak Vomat untuk oli grinding dan cairan pendingin dengan filtrasi aliran penuh menggunakan proses backwash dan unit pendingin. Kapasitas filtrasi: 240 l/menit, kehalusan filtrasi: 3–5 µm, volume tangki: 500 l, dimensi mesin P/L/T: kira-kira 1600 mm/1000 mm/1200 mm, berat: sekitar 500 kg. Dokumentasi tersedia. Inspeksi di lokasi memungkinkan. Gsdpszhb Ezsfx Ahbjiw

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ----- Posisi 1→ No.: 1406 *1x VDI40→ Dudukan pemegang baja C4 kondisi hampir baru No. C4-RC2040-51030 Berat/unit: ± 4 kg Harga satuan netto: 350 €/unit ----- Berbagai pemegang baja kondisi hampir baru: total 9 unit 3x pemegang boring dalam → 150,00 €/unit 6x pemegang boring luar → 150,00 €/unit ----- Pemegang pahat bubut, pemegang baja, alat bubut, pemegang insert bubut, Gjdpfx Aheyub Eisbeiw Berbagai tipe: lihat foto, gambar tambahan atas permintaan -Tidak dijual terpisah – hanya dijual sebagai satu paket lengkap Biaya pengiriman atas permintaan

Kondisi: baru, de_to_hu_it_lt_001 Gedozbyg Ejpfx Ahbeiw

Kondisi: sangat baik (bekas), Professional dividing table / indexing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. The set is intended for milling machines and precision machining operations requiring angular division and indexing of workpieces. Technical data: • Indexing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precision angular scale • Indexing plate with indexing crank • Solid cast iron construction • Capable of accurate angular divisions Applications: • Milling of polygons • Gear cutting Giodpeza Hidofx Ahbow • Machining of shafts and rotary components • Drilling holes at a specific angle • Toolroom and production tasks Condition: • Used item • Fully complete • Normal signs of use visible in the photos • The BISON chuck operates smoothly and securely clamps the workpiece • Scales and indexing mechanism are legible and functional Set includes: • BERNARDO BS-1 indexing head • BISON Ø160 mm lathe chuck • Indexing crank The item for sale is exactly as shown in the photos.

Kondisi: baru, Included in the scope of delivery: 100x double bar buckles, new for 35 mm webbing Material color: Sendzimir galvanized Total length: approx. 83 mm Total width: approx. 54 mm Internal width: approx. 35 mm Material thickness: approx. 4.00 mm Breaking load: 1,600 kg Weight | per piece: 0.090 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Gsdpfxepuz I Sj Ahboiw General information about the item: This item is offered for collection only. Any transport or shipping of this item beyond that is subject to additional costs, which can be inquired separately depending on the delivery location or scope of delivery.

Kondisi: baik (bekas), We offer you a used rear wall mesh bracket for purchase. The scope of delivery includes: 01x Bracket for rear wall mesh, used Material finish: sendzimir galvanized Dimension leg A: approx. 115 x 85 mm Dimension leg B: approx. 50 x 85 mm Rear wall mesh clearance: approx. 85 mm Gsdpfx Aogyfxpjhbjiw Slot hole size: approx. 21 x 10 mm Center-to-center hole distance: approx. 50 mm Weight per unit: approx. 0.403 kg Shipping costs upon request

Kondisi: seperti baru (mesin pameran), English Translation: Scope of delivery includes: 01x Upright protector, 2nd choice Material color: yellow Total height: approx. 1,000 mm Total width: approx. 128 mm Internal width: approx. 120 mm Gisdpfx Ahelikw Hjbjw Material thickness: approx. 4.00 mm Weight: approx. 5.23 kg | per piece Each side: 2 drill holes Ø approx. 11 mm Center-to-center hole distance: approx. 900 mm

Kondisi: baru, The scope of delivery includes: 01x Compensation plate, new Manufacturer: Stow Material color: Sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 1 mm Weight: approx. 0.125 kg | per piece Currently available in stock: approx. 2,500 pcs Gjdstdb T Espfx Ahbsiw Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipping of this item is subject to extra costs, which can be quoted separately depending on the delivery location and order volume.

Kondisi: bekas, bentang bebas: 709 mm, The scope of delivery includes: 01x Depth beam, used Manufacturer: Nedcon Material color: Sendzimir galvanized Beam support: approx. 40 mm for upright depth: approx. 800 mm Total length: approx. 802 mm Clear support width: approx. 709 mm Profile dimensions: C: 60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 1.983 kg Giedpfx Ahjrgp U Iebsw General information about the item: This item is only available for collection. Transport or shipping beyond this is subject to additional costs, which can be specifically requested from us depending on the place of delivery and scope of delivery.

Kondisi: bekas, bentang bebas: 1.800 mm, lebar total: 1.050 mm, tinggi total: 12.100 mm, beban per pasangan rangka atap (maks.): 1.250 kg, panjang rak: 11.430 mm, Technical Data for the Pallet Racking System: Rack System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 1 unit Length per rack row: approx. 11,430 mm Number of bays per rack row: 6 units at 1,800 mm each Number of levels incl. ground level: 9 units Volume Specifications: Pallet spaces per bay: 20 units Pallet spaces per rack row: 120 units Total pallet spaces: 120 units Assuming: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 625 kg Scope of Supply Includes: 07x pallet rack uprights, used Material color: Sendzimir galvanized Frame profile: P93 Profile dimension: 90 x 75 x 2.00 mm Adjustment pitch: 50 | 50 mm Godpfx Aetznl Ijhbjiw Max. bay load: 11,250 kg At buckling height: 1,000 mm (Minimum 5 bays per rack row) Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice structure) 12,100 mm high 1,050 mm deep 07x rack protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Internal width: approx. 91 mm Total depth: approx. 60 mm Leg dimension: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x pallet rack beams, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Connector: 4 HK (hooks) Max. load per pair of beams: 2,800 kg, with evenly distributed load Note: Due to the rack configuration the bay load per pair of beams is reduced to 1,250 kg 216x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Design: galvanized For leveling rack uprights installed on uneven floors 01x load sign with specifications for bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be quoted upon request, depending on the delivery location and scope.

Kondisi: baik (bekas), bentang bebas: 1.800 mm, tinggi total: 12.100 mm, beban per pasangan rangka atap (maks.): 1.250 kg, panjang rak: 9.540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 unit Gedpjtyyr Sefx Ahbsiw Length per rack row: approx. 9,540 mm Number of bays per rack row: 05 units at 1,800 mm each Number of levels plus ground level: 09 units Volume specifications: Pallet positions per bay: 20 units Pallet positions per rack row: 100 units Total pallet positions: 100 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max.): 625 kg Scope of delivery includes: 06x pallet rack frames, used Material finish: Sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment pitch: 50 | 50 mm Maximum bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays per rack row) Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (bolted lattice construction) 12,100 mm high 1,050 mm deep 06x frame protectors, used Material finish: yellow Total height: approx. 750 mm Total width: approx. 99 mm Internal width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x pallet rack beams, used Material finish: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear span: 1,800 mm Bracket: 4 HK (hooks) Max. load per pair of beams 2,800 kg, with evenly distributed load Note: Due to the rack configuration, the permissible bay load per pair of beams is reduced to 1,250 kg. 45x wire mesh decking, used Version: with notches Material finish: hot-dip galvanized Total depth: approx. 1,060 mm (main bar orientation) For frame depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (cross bar orientation) Main bar dimensions: 28|1.50 mm Beam support seating: approx. 58 mm Frame height: approx. 44 mm Mesh size: approx. 33 x 33 mm Weight | piece: approx. 33.310 kg Internal reference: GR-76 180x locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x shim plates, used Version: fully galvanized For leveling the rack frames when installed on uneven floors 01x load sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be provided upon request depending on the delivery location and required scope.

Kondisi: sangat baik (bekas), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Gisdpfxeh Ei Ude Ahbow Scope of delivery includes: 01x Post protector, used Material color: yellow Design: V-shape Total height: approx. 750 mm Total width: approx. 100 mm Inner width: approx. 93 mm Total depth: approx. 60 mm Material thickness: approx. 3.50 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole Ø: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is only offered for collection. Should you require delivery/dispatch, this can be arranged at additional cost, which can be provided upon request depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly, installation Our general installation conditions apply Racking inspection Inspection in accordance with DIN EN 15635 carried out as per BGR 234 visual inspection standard for all racking systems Delivery with our own fleet (without unloading)

Kondisi: baru, Included in the scope of delivery: 01x Balancing plate, new Manufacturer: Stow Material finish: Sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 3 mm Weight: approx. 0.38 kg | each Currently available in stock: approx. 2,610 pcs Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Gjdpstda Sdjfx Ahbeiw This item is only available for collection. Transportation or shipping of this item can be arranged at additional cost, which may vary depending on the delivery location and quantity. Please contact us for a quote.

Kondisi: bekas, Landasan cocok untuk tangki dengan diameter 2600 mm, saya juga memiliki untuk tangki dengan diameter 2200 mm. Terbuat dari baja karbon biasa, harga yang tercantum berlaku untuk satu unit. Gisdpfx Ahszdarmobsw Silakan lihat juga iklan saya yang lain.

Kondisi: bekas, Tahun pembuatan: 2015, lebar konstruksi: 400 mm, Pembawa benda kerja dan keranjang kawat, misalnya untuk otomatisasi. Keranjang kawat dengan alas beroda, disebut juga keranjang tumpuk, kotak tumpuk dengan konstruksi kuat. Sasis: Keranjang kawat dan sasis Wanzel tersedia juga dalam jumlah lebih sedikit. Alas beroda dengan masing-masing 2 roda tetap dan berputar, keranjang kawat, troli angkut, rangka bawah beroda, troli dorong, galvanis dan biru pasivasi dengan dudukan. Bahan baku: kawat baja C9D. Ukuran: Ukuran keranjang: P x L x T 400 x 600 x 5,3 mm dengan pembawa. Alas beroda: P x L x T 430 x 630 x 230 mm, diameter roda Ø 100 mm. Tinggi total: 1096 mm, cocok untuk 12 pcs keranjang. Harga per keranjang €12,-- netto ex lokasi ditambah biaya kemasan. Alas beroda per buah €78,-- netto ex lokasi ditambah biaya kemasan. Keranjang kawat dalam kondisi sangat baik. Penggunaan serbaguna. Semua data teknis dapat terjadi kesalahan penulisan/penyimpangan. Kami hanya menjual ke negara-negara Uni Eropa. Gisdpfshctykex Ahbjw

Kondisi: sangat baik (bekas), Terbuat dari besi cor berat – kekakuan dan daya tahan tinggi. Lubang kerja sekitar 120 mm (diukur dengan jangka sorong). Pin yang dapat diatur dengan ujung rol. Pemasangan melalui lubang di dasar – penempatan yang aman dan stabil. Kondisi sangat baik, sepenuhnya berfungsi dan siap digunakan. Sempurna untuk pemesinan poros, pipa, batang, dan elemen lain yang membutuhkan penyangga selama pembubutan. Gisdpfx Ahew Sfptjbow

Kondisi: sangat baik (bekas), Dijual satu set holder alat ATORN Germany – kualitas tinggi, merek premium Hahn+Kolb. Spesifikasi teknis: • Produsen: ATORN • Model: 20723200 • Standar: DIN 69871 SK40-1/10-100 • Panjang: 100 mm • Dalam set: belasan unit, sebagian dengan mata bor terpasang (terlihat di foto) Kondisi: sangat baik, praktis barang stok gudang. Hanya digunakan untuk uji coba, tanpa keausan kerja. Cocok untuk pusat pemesinan CNC dan mesin frais. Harga untuk 1 unit. Gsdpfx Ahsw Ulraebjiw

Kondisi: baik (bekas), Aceti Macchine double-ended bench grinders Type: FB 90 2/4 ART 101 Maximum grinding wheel diameter: 210 mm Machine height: 130 cm Weight: approx. 125 kg Gsdpfx Ahjl I I Upsboiw

Kondisi: bekas, Technical details: Disc diameter: 780 mm Gijdpfx Asu Ng Rtehbew Table height above floor: 800 mm Table size: 890 x 190 mm Grinding table: adjustable tilt, degrees Total power requirement: approx. 2.0 kW Approx. machine weight: 0.2 t Required floor space approx.: L: 1.2 x W: 1.05 x H: 1.3 m DOUBLE-DISC GRINDING MACHINE - Mounted on a cast machine base as a complete unit. - Fields of application: Metal; Wood; Plastics - Abrasive disc diameter: 680 mm - Abrasive material: sandpaper - Extraction port: 80 x 120 mm

Kondisi: bekas, Technical details: Grinding table: Tilt function: no degrees Giedpfx Aju Ng Sqjhbsw Operating voltage: 220 V Machine weight approx.: 44 kg Space requirements approx.: 0.3 x 0.45 x 1.1 m Right wheel: Ø 150 mm x W: 50 mm; wheel fitted with abrasive flaps Left wheel: Ø 125 mm x W: 50 mm; wheel fitted with abrasive flaps Dual-sided support table Machine mounted on stand with base plate. Operation via on/off switch

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 9 kg, panjang total: 500 mm, tekanan (maks.): 8 batang, tingkat kebisingan: 102 dB, hidung spindel: 1'', torsi spindel (maks.): 2.400 Nm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Kami menawarkan Chicago Pneumatic CP7783-6 impact wrench baru ini, tahun produksi 2025. Produsen: Chicago Pneumatic Model: CP7783-6 Tahun produksi: 2025 ID Kategori: 651 ID Tipe: 649 Tipe: Impact wrench Jika ada pertanyaan atau membutuhkan informasi tambahan, silakan hubungi kami melalui pesan atau telepon. Godpfx Ahozcutcobeiw