Beli Huber Kiss K25 bekas (229)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Fpoded Tiu Ejpfx Aa Hjl Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: bekas, jarak tempuh: 18.025 km, daya: 73 kW (99,25 hp), pendaftaran pertama: 03/1960, jenis bahan bakar: bensin, berat kosong: 3.560 kg, berat muatan maksimum: 1.840 kg, berat keseluruhan: 5.400 kg, ukuran ban: 6.5-20, konfigurasi gandar: 4x2, warna: merah, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, suspensi: baja, jumlah tempat duduk: 9, panjang total: 6.900 mm, lebar total: 2.150 mm, tinggi total: 2.500 mm, Perlengkapan: kabin, kopling trailer, lampu depan tambahan,

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, de Fodjwm Nu Djpfx Aa Hspl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9FBMK25T-11333, Tahun pembuatan: 2023, jam operasional: 6.265 h, kapasitas angkut: 2.500 kg, tinggi angkat: 4.700 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.260 mm, jenis penggerak: Elektro, Forklift Elektrik 4 Roda Nomor Rangka: 9FBMK25T-11333 Pusat Gravitasi Beban: 500 Jenis Tiang: Triplex Kondisi: Siap digunakan dan berfungsi penuh Kondisi Teknis: baik Jenis Ban Depan: Superelastik Jenis Ban Belakang: Superelastik Voltase Baterai: 80V Fpedpfx Aozi H Tasa Hel Penggeser Samping, Katup ke-3, Katup ke-4, Kaca Depan, Kabin Tertutup, Kaca Spion Dalam, Penyeka Kaca,

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBUT133-544, Demag KBK crane runway with approximate dimensions 10.5 x 6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made from Demag KBK1/2 rails. System is supplied complete: KBK rails, rail connectors, carriages, end plates, cable support, brackets Including steel 500 kg chain hoist – lifting height approx. 3 m Crane is dismantled and available immediately. Used condition, see pictures Item location: 75053 Gondelsheim Fpedoty Sxwopfx Aa Hjl Shipping via freight forwarder or collection only by prior arrangement Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 kg to 1600 kg. Please inquire for your crane runway, specifying load capacity and dimensions, without obligation.

Kondisi: bekas, CNC lathe automatic machine KUMMER K250 LSK Fpedpjwdafusfx Aa Hsl

Kondisi: bekas, jarak tempuh: 230.000 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 05/2018, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, warna: lain, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2018, Perlengkapan: ABS, kemudi berkuasa, lampu kabut, pengaturan jendela elektrik, spion elektrik,

Kondisi: hampir baru (bekas), WIDIA-inserts-set Fpjdpfx Aey H Nzkoa Hol

Tahun pembuatan: 2024, Kondisi: siap digunakan (bekas), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It offers a high positioning speed of 90 m/min and is capable of handling cutting heights up to 100 mm. The machine operates with PC-based NC software and supports various tool options, such as electric oscillating knives and powered rotary cutters. Ideal for cutting leather, textiles, and foam materials. For further information regarding this machine, please contact us. Machine Advantages Technical Machine Advantages • Positioning speed: 90 m/min / Cutting height: Standard: up to 50 mm / Special version: up to 100 mm / Repeat accuracy: ±0.25 mm / Precision: 0.1 mm • Material layers: single layers or low stacks Fodpfx Aex D Nnpea Hepl • Electrical requirements: Operating voltage: 400 VAC, 50/60 Hz / Current: 63-125 A / Control: PC-based NC software / Compressed air: Standard: 6.0 bar / 200 l/min / For pneumatic knives: 8.5 bar / 600 l/min • Working area (standard sizes): Maximum size: 7500 x 3200 mm / Other options: 3500 x 2100 mm, 5500 x 3200 mm, etc. / Customization: Customer-specific sizes possible • Tool options: FOT: electric oscillating knife (up to 15,000 oscillations/min) / PRT: powered rotary knife (up to 11,000 rpm) / KCT: kiss-cut tool (surface-friendly) / UCT: universal knife (tangentially controlled) / V-Cut: angle cutting tool / Milling head: with extraction • Nesting expert: Optimal material utilization / Pattern expert: CAD template management / Order expert: ERP integration (e.g., SAP) / Pick expert: Visual sorting assistance • Fields of application: Cutting of leather, technical textiles, foam, plastics, rubber, composites, prepregs, sealing materials, films, cardboard

Kondisi: bekas, jarak tempuh: 599.472 km, daya: 228 kW (309,99 hp), pendaftaran pertama: 11/1997, ukuran ban: 315/80R22,5, konfigurasi gandar: 6x2, jarak roda: 4.100 mm, warna: kuning, tipe perpindahan gigi: mekanis, jumlah gigi: 14, suspensi: baja, panjang ruang muatan: 3.400 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 900 mm, Tahun pembuatan: 1997,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, kapasitas angkut: 2.500 kg, Ganda garpu palet Titik berat beban: 600 Kelas ISO: Kelas ISO 3 = 2.500 - 4.999 kg Kondisi: Siap pakai dan berfungsi penuh Fpedsyi I Tvopfx Aa Hol Kondisi Teknis: baik Deskripsi: Tahun 2019 ISO 3A (51 cm) Kapasitas 2500 kg Sideshift Rentang bukaan 560-1960 mm Lebar 1250 mm Garpu 1150 mm ID OS1859

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: RES-RIO, Technical Data: 1x Demag KBK 2 pillar-mounted slewing crane, rated capacity 500 kg, with Demag PK2 chain hoist (illustration shows DK chain hoist) 5 identical cranes available!!! Load capacity at full outreach: 500 kg / 0.5 t Fpedpfx Aju Rn I Nja Hel Height: approx. 3.55 m Underside of jib: approx. 3.05 m Outreach: 3 m Hook height: approx. 2.55 m Total weight: approx. 550 kg Anchor plate: 40 x 40 cm Supplied with Demag PK2 500 kg chain hoist Including pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available; load capacity 80–5000 kg, please inquire. See pictures Shipping via freight forwarder or collection only by prior appointment

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 33.770 h, Fungsionalitas: berfungsi sepenuhnya, Kompresor ulir Kaeser SK25 Inverter terintegrasi 15 kW Fpodjzttfwopfx Aa Hol 10 bar 2,11 m3/menit Tahun pembuatan: 2018 Jam operasi: 33.770

Kondisi: bekas, Tahun pembuatan: 1992, 1 Fedpfxezk Nl Uo Aa Hspl

Kondisi: bekas, Tahun pembuatan: 1998, Mesin Bekas Tahun Pembuatan 1998 Dengan mesin ini, lubang dapat dibuat untuk bantalan sudut, jendela atas, dan lubang untuk pengikat pada rangka kayu yang terpasang secara longgar atau tertekan. Pengukuran dilakukan pada alur. Delapan penopang untuk bantalan sudut dan jendela atas, serta untuk kayu pengganjal dan kayu penyangga, akan berfungsi secara otomatis setelah kayu ditempatkan. Mesin ini memiliki urutan program otomatis, dengan penggerak elektrik untuk motor pengebor, yang diaktifkan oleh pedal kaki pengaman. Sambungan pneumatik R 1/4, 5-6 bar Kecepatan hisap 25 m/detik. Diameter saluran hisap 120 mm Fpodpozk Nzpsfx Aa Hel Sambungan listrik 0,75 kW Ukuran yang dibutuhkan 2950 x 650 x 1100 mm Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Flörsheim

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: (20020324 EG) - VK-RES, DEMAG KBK crane system with runway dimensions approx. 16.5x7m (7m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/hangers, etc. incl. Demag PK2 500KG chain hoist – lifting height approx. 4.5m Crane is dismantled and available immediately Fpedpfxoty S I Es Aa Hjl Used condition, see photos Location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Load capacity: 125kg – 1600kg Please feel free to send a non-binding inquiry with your required crane runway load capacity and dimensions.

Kondisi: bekas, Tahun pembuatan: 1992, Machine no.: 920229 Grinding belt dimensions: 75 mm x 2000 mm Disc dimensions: 250 mm Fpsdporxg Tqsfx Aa Hjl Weight: 90 kg Voltage: 380 V

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: Fpodpfxswrm Dts Aa Hjl >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system Fsdpfx Aevrckqja Hepl >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2025, Klaas K2500 RHX Volvo FMX 388 RHD Truk Crane (2025) Fedpfxjy Ndris Aa Hopl Kapasitas maksimum 9 ton, panjang boom 59 m – untuk spesifikasi teknis lebih lanjut, silakan lihat dokumen PDF terlampir. Harap diperhatikan bahwa foto yang ditampilkan adalah foto perpustakaan. Foto terbaru dari crane sebenarnya akan menyusul. Informasi lebih lanjut, termasuk pemakaian/jumlah kilometer, akan diinformasikan kemudian. Pendaftaran minat lebih awal sangat disarankan.

Kondisi: baru, Tahun pembuatan: 2025, Automatic side sealing machine for products without length limitation. PRO version with so-called Kissing Table function (movable infeed conveyor) for handling short products. The sealing position (meeting point of sealing bar and counterpart) is height-adjustable for a centrally positioned weld seam. Quickly interchangeable perforating needles. Ideally combined with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO version. Settings and monitoring via touchscreen with intuitive operation. Easy film loading close to the floor. High packaging speed. Specifications: max. machine cycle rate (no load): 60 cycles/minute; max. packaging size: L(80-unlimited)xW(50-420)xH(2-180)mm; sealing knife width: 530mm; power supply: 220V/3kW; compressed air: 6bar; machine dimensions: L1820xW1605xH1350mm. Optional: stacking systems for shrink-wrapped pallets, etc. Please note that our new prices are often below the usual used equipment prices. Simply contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available for immediate delivery from stock. For custom-made machines, we offer very short lead times of around 3 weeks. – All machines are available with a full warranty. Fpsdpfsv Nl Erex Aa Hel

Kondisi: baru, Tahun pembuatan: 2025, PRO version of the vertically operating L-sealing machine for shrink packaging. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO version. The machine operates with four columns, ensuring an extremely stable vertical position and very consistent pressure on the shrink film. Excellent sealing results with minimal creasing. The height and pressure of the sealing frame are adjustable. Easily adjustable perforation module. Sliding conveyor (kissing table) for processing product lengths under 50mm. Optional infeed systems for CD, DVD, etc. available. – Specifications: Conveyor belt speed: 26 m/min; max. machine cycle rate in idle: 40 cycles/minute; packaging sizes: L(60–560) x W(60–430) x H(10–180), W+H Fpodjv Nl Dzepfx Aa Hol

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or pilot plant version. This machine is ideally suited for trials, compounding, product development, and small-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on configuration, screw speeds of 460 / 600 / 800 rpm are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones: barrel heating consists of 1 x 850 W and 5 x 1200 W, while die/adapter heating is 600 W. Water cooling is provided, with temperature control across zones 1 to 6. Water cooling connection via hose. Technical data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 rpm Fpjdpfxey A H Umj Aa Hel • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: - Length: approx. 2,100 mm - Width: approx. 600 mm - Height: approx. 1,900 mm - Screw center height: approx. 1,100 mm Electrical data: • Connection: 3 x 400/230 V, 50/60 Hz • Mains connection: L1 / L2 / L3 / N / PE • Fuse protection: 3 x 50 A • Max. connected load with downstream equipment: 30 kW Application areas: Ideal for laboratory, pilot plant, development, pilot runs, compounding, and material testing.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 2 h, nomor mesin/kendaraan: 101957.01, Ex-demo unit available immediately: Fpedpfxjv Ammko Aa Hol New Kaeser SK 25 – 8 bar screw compressor Control system: SIGMA CONTROL 2 Pressure: 8 bar Rated power: 15 kW Free air delivery: 2.52 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2 h Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Fjdpsvrcqdsfx Aa Hopl On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.