Beli Katt Unit Penggilingan bekas (42.995)

Kondisi: baru, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Motor Magnet Permanen, No. Seri MAC112-80864, belum pernah dipakai dalam kemasan asli yang telah dibuka, 100% berfungsi PERHATIAN: Biaya pengemasan dan pengiriman harap ditanyakan secara terpisah! Lodpfx Ahei D Ip Rjreru

Kondisi: siap digunakan (bekas), Indramat MDD093B-F-020-N2L-110GA0 Motor Magnet Permanen SN: MDD093-13807, bekas, tanda-tanda pemakaian normal, 100% berfungsi, cakupan pengiriman sesuai foto. Lrsdpei D Ivwefx Ahrsu

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Grinding Spindle Headstock Ljdsvca Izopfx Ahreru Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Ljdpfx Ajlnfggehrsru Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided.

Kondisi: sangat baik (bekas), 429 UNIT BEKAS, Mesin Pendingin dan Pengering Garprofi. DIMENSI EKSTERIOR (dalam cm): - lebar 220, - kedalaman 600. Harga yang tertera adalah harga netto. KAMI BERBICARA DALAM BAHASA INGGRIS, JERMAN, PRANCIS, RUSIA, UKRAINA. Kami memiliki banyak sekali oven di gudang kami: oven rak, oven putar, oven gas, oven minyak, oven listrik, dari berbagai merek. Kami juga menawarkan mesin dan peralatan untuk industri roti: lini produksi roti, lini produksi kue. Lrsdpfjzi Urksx Ahrsu Jika Anda ingin melihat penawaran lengkap dan terbaru kami, kunjungi profil Bakeres kami.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Technical Data POWER UNIT 200 P Lsdpfx Aobpg Ncehroru • Suction nozzle diameter: 200 mm • Rated motor power: 2.9 kW; 400 V/50 Hz • Maximum air flow: 3010 m³/h • Nominal air flow: 2262 m³/h • Negative pressure: 2174 Pa • Filter surface area: 13.7 m² • Filter cleaning: compressed air cleaning • 2 discharge containers (roll containers): each 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Configuration / Operation side selectable: right / left Location: Ex stock Bitburg Top price for the demo unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Kity tilting spindle moulder 629 Motor: 2.2 kW / 400 Volt Table size approx. 580 x 715 mm Finely adjustable milling fence Spindle tilting +30° to -5° Spindle can run clockwise and counterclockwise Speeds: 4800 / 6400 / 8700 rpm Spindle stroke: 130 mm Ljdpfor Id S Eex Ahroru Tool diameter up to 180 mm Extraction connection: 2 x 100 mm Location: in stock, 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Robust German engineering Table spindle moulder with a fixed, single-sided tilting spindle for a swiveling range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed displays 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Lrjdpfsr Ig H Tjx Ahreu Push-buttons for spindle start and stop Left- and right-hand rotation Quick-change cutter clamping system Finely planed grey cast iron table with rigid frame support Control panel positioned below on rigid frame support Model 216 moulder fence: complete adjustment via handwheel and LCD display, including cast iron fence plates and aluminium anti-splinter bars Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved work fence 1639 Tapoa Milling spindle 30 mm, non-interchangeable CE compliant GS tested Table dimensions: 1100 x 760 mm Table height: 870 mm Spindle (non-interchangeable): 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight approx. 800 kg Equipment: Control panel (upper position) Tilting ±45 degrees Motor 7.5 kW Centrex Extendable frame support Location: ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, STRIEBIG III TRK pre-scoring unit (scorer) In wooden crate Can be retrofitted to a Striebig Standard TRK Location: ex stock 54634 Bitburg Lsdpfx Aevluwvehrsru - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to its standard quill feed. The dovetail guide of the gearbox head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed (12): 50 - 2520 rpm Spindle taper: MT4 Quill stroke: 120 mm Quill feed (3): 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle/table: 40 - 485 mm Travel (X / Y): 550 / 190 mm Milling head vertical adjustment: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Weight approx.: 285 kg Ljdevutw Hspfx Ahrsru Standard equipment: - Automatic quill feed and tapping unit - Wide speed range 50 - 2520 rpm (12 steps) - Adjustable dovetail guides for X, Y, and Z axes - Versatile applications: slot milling, face milling, boring, etc. - Heavy-duty, large cross table with precision-ground surface - Milling: quill movement via hand wheel - Drilling: quill movement via hand wheel - High-quality aluminum motor designed for continuous operation - Stable, vibration-free cast iron construction - Simple and quick speed change via shift lever - Swiveling milling head for angle drilling, chamfer milling, etc. Location: ex stock 54634 Bitburg - Available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Lrsdpfshp Rcrsx Ahrou Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: baru, Tahun pembuatan: 2025, en:Tischfräse minimax twf 55 es M 3 UP Professional joinery machine with motorized height and tilt adjustment of the milling spindle, four speeds, and electronic control system Article Number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminum sliding table ✔ Handle on sliding table ✔ Milling fence FLEX ONE: Heavy-duty professional design, automatic adjustment of the entire milling fence according to tool diameter, manual chip removal adjustment, fence swiveling device, aluminum fence jaws with connecting rails Spindle height adjustment motorized Telescopic mitre fence with two flip stops Spindle tilt adjustment motorized Supporting table ✔ Control system Ready 3: Programmed movement of the milling unit in two axes, automatic adjustment of the entire milling fence based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Positioning of control elements Operator panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and Weights Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Suction port diameter 2 x 120 mm Work Table Table length 1200 mm Sliding table length 1200 mm Table width 530 mm Sliding table width 360 mm Table height 900 mm Sliding table height 142 mm Setup Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Explanation of space requirement: The dimensions include maximum traversing paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Explanation of working area: Add the listed dimensions to the space requirement to determine the recommended free floor area for the machine. Electrical Data Supply voltage 400 V Drive motor power 5.0 kW Mains frequency 50 Hz Milling Spindle Spindle tilt 0 to -45° Milling spindle speed display Control system display Usable spindle length 125 mm Spindle shaft diameter 30 mm Spindle speeds 3500/6000/8000/10000 rpm Milling Tool Diameter (Max.) Lrjdpfx Ahjhp Rc Ijrou Maximum tool diameter 240 mm Maximum profiling cutter diameter 240 mm Maximum retractable tool diameter 230 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, AL-KO clean air dust extractor Ex-demo unit Available at a special price Technical data – Power Unit 250 P Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter surface area: 22.4 m² Chip collection bin: 2 x 250 L Dimensions (L x W x H): 2,305 x 994 x 2,351 mm Ledpfx Ahecdr Ensroru Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, 8 bar coolant pump, gear hobbing option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff – The Okuma Specialist and NeffBuy We are also pleased to offer you our comprehensive all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent after-sales service. Bjsvkhv0lno We provide Okuma CNC service throughout Europe, both electronically and mechanically. Additionally, we have a 1,200 m² inventory of all Okuma spare parts. Please feel free to visit our website for more information. Ledpfevta Rkox Ahrsru

Kondisi: bekas, jarak tempuh: 856.500 km, daya: 294 kW (399,73 hp), pendaftaran pertama: 05/2015, jenis bahan bakar: diesel, berat kosong: 8.466 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/70 R22,5, konfigurasi gandar: 2 gandar, rem: pengereman mesin, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat tidur: 2, jumlah tempat duduk: 2, Perlengkapan: ABS, kendali jelajah, komputer bawaan, kunci diferensial, kunci sentral, pemanas parkir, pendingin udara, rem angin bertekanan, spoiler,

Kondisi: bekas, jarak tempuh: 511.147 km, daya: 478 kW (649,90 hp), pendaftaran pertama: 01/2021, jenis bahan bakar: diesel, berat kosong: 14.180 kg, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 01/2027, rem: retarder, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, jumlah tempat tidur: 1, jumlah tempat duduk: 2, Perlengkapan: ABS, derek, kendali jelajah, komputer bawaan, kunci diferensial, kunci sentral, pemanas parkir, pendaftaran truk, pendingin udara, rem angin bertekanan, sistem navigasi, spoiler,

Kondisi: bekas, jarak tempuh: 175.303 km, daya: 382 kW (519,37 hp), pendaftaran pertama: 03/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 03/2027, rem: retarder, warna: hitam, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2025, Perlengkapan: ABS, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baik (bekas), Tahun pembuatan: 1992, Bidang penempatan meja: 1850 x 710 mm Kapasitas beban meja: 3000 kg Jarak sumbu: Memanjang, otomatis (X): 1600 mm Menyamping, otomatis (Y): 710 mm Vertikal, otomatis (Z): 850 mm Konektor spindle: SK 50 Rentang putaran: 20 - 2500 rpm Lodpfx Aottamkehreru Daya motor utama, AC: 15 kW Dimensi pengangkutan (P x L x T): 3650 x 2300 x 2700 mm Berat: 9400 kg Aksesori / Fitur khusus: • Kontrol jalur CNC merek HEIDENHAIN model TNC 360 dengan 3 pembaca skala • Bahasa pemrograman "dialog teks langsung" dan DIN-ISO • Handwheel elektronik HEIDENHAIN HR 330 dengan dudukan magnet • Sistem pengukur 3-D HEIDENHAIN TS 120 • Unit spindle utama compact RAC 3 • Kontrol telah disiapkan untuk sumbu ke-4 • Kepala frais universal sistem "HURON" dengan 2 level, roda gigi berjalan dalam bak oli • Penjepitan alat hidrolik • Sistem pendingin cair • Pelumasan sentral dengan interval • Elektrik Jerman, penggerak INDRAMAT • Panel kontrol gantung • Buku panduan operasi - Kepala frais bekas baru, semi-overhaul dengan roda gigi, seal, dan bearing baru - Doser oli untuk pelumasan sentral telah diperbarui Jam operasi: 10.032 Program berjalan: 3.288 Spindle ON: 2.569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Jerman

Kondisi: sangat baik (bekas), Special accessories for DECKEL SO + SOE cutter grinders: - 1 precision special holder for cutters, in excellent condition o For grinding shank cutters with diameters of 16 – 25 mm and Morse taper shank MK 1, MK 2, and MK 3 o Cutters with a 25 mm clamp shank can be mounted directly o Through-hole max. 25 mm Price: €950.00 net - As-new collets for special cutter holder: - 1 set of collets for special cutter holder, internal diameter Ø 16, 18, and 20 mm, Price: €129.00 each, net - 1 set of collets for special cutter holder, internal square □ 8, 10, and 12 mm, Price: €145.00 each, net - 1 set of Morse taper holders MK 1, MK 2 & MK 3, Price: €245.00 each - As-new cup grinding wheel Ø 80 mm, Price: €40.00 each, net - 1 brand new knurled nut for clamping collets with saw thread S 20 x 2, Price: €99.00 + €12.80 shipping, net All prices quoted are net, plus statutory VAT. Siegfried Volz Werkzeugmaschinen Lsdoctyh Uepfx Ahroru Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: baru, 1 kepala frais universal baru, tersedia dalam versi standar atau versi dengan performa lebih tinggi, untuk dipasang pada mesin frais konvensional, mesin frais NC, atau mesin frais CNC dari berbagai jenis, sistem "HURON", dapat diputar pada 2 bidang, setiap sudut dapat disesuaikan. Dudukan ISO 40 Jangkauan sekitar 360 mm Daya penggerak yang direncanakan 10 HP Kecepatan maksimum 1.800 RPM Berat dalam versi standar sekitar 82 kg Aksesori / Fitur khusus: • Pegang alat secara manual • Spindel utama dan semua poros serta bagian yang berinteraksi terbuat dari krom-nikel yang dikeraskan dan ditempa • 2 sumbu yang dapat diputar relatif satu sama lain, sehingga setiap sudut pengaturan dimungkinkan! Sistem "HURON" • Bagian yang meruncing diasah sesuai dengan sistem "KLINGELNBERG" • Bantalan rol spindel utama terbuat dari rol presisi tinggi yang meruncing • 1 sekrup pengencang alat Waktu pengiriman: sekitar 12-14 minggu, setelah pesanan diterima Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lrodjdbny Espfx Ahrju DE - 44143 Dortmund - Wambel / Jerman

Kondisi: baik (bekas), Tahun pembuatan: 1991, 1 Lrjdoupiypjpfx Ahrou

Kondisi: baru, 1 kepala frais universal baru dari pabrik, sistem “HURON” dengan penjepit perkakas hidrolik Produsen: EMENA - MTE, Asal: Spanyol Model: VAR 3 - BF, BM, KOMPAK Data Teknis: Dudukan spindel DIN 69871 ISO 50 Jangkauan 358 mm Kecepatan maksimum 3000 RPM Ljdpfx Ajzdbxbjhroru Daya penggerak maksimum 22 kW Flens pemasangan: Diameter luar Ø 306 mm Dimensi P x L x T 460 x 306 x 360 mm Berat sekitar 150 kg Aksesori / Fitur Khusus: • 2 sistem bidang putar “HURON” • Penjepitan perkakas hidrolik • Untuk pemasangan tambahan pada mesin frais dan mesin frais papan konvensional, NC, atau CNC, atau mesin pengeboran (misalnya: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Waktu pengiriman: sekitar 12-14 minggu, setelah pesanan diterima Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Jerman

Kondisi: bekas, 1 kepala frais universal bekas yang telah direkondisi sebagian, sistem "HURON" dengan penjepit perkakas hidraulik Merek: EMENA - MTE, Asal Spanyol Model: VAR 3 - BF, BM, KOMPAK Data Teknis: Dudukan spindel DIN 69871 ISO 50 Jangkauan 358 mm Kecepatan maksimum 3000 RPM Daya penggerak maksimum 22 kW Flens pemasangan: Diameter luar Ø 306 mm Dimensi P x L x T 460 x 306 x 360 mm Berat sekitar 150 kg Aksesori / Fitur Khusus: • 2 bidang putar sistem "HURON" • Penjepitan perkakas hidraulik Lredpfx Ahoz Adz Isrju • Untuk pemasangan selanjutnya pada mesin frais dan mesin pemotong pelat konvensional, NC, atau CNC, atau mesin pengeboran (misalnya: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Waktu pengiriman: sekitar 2 minggu, setelah pesanan diterima Pekerjaan berikut dilakukan selama rekondisi sebagian: - 1 set roda gigi baru - 1 poros roda gigi baru - Pemasangan bantalan baru pada spindel frais dan poros roda gigi - Segel baru untuk spindel frais dan penjepitan perkakas hidraulik - Pengecatan ulang Gambar tersebut serupa dan menunjukkan kepala frais yang telah direkondisi. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Jerman

Kondisi: bekas, jarak tempuh: 1.096.400 km, daya: 340 kW (462,27 hp), pendaftaran pertama: 09/2016, jenis bahan bakar: diesel, berat kosong: 8.477 kg, berat keseluruhan: 18.000 kg, ukuran ban: 315/70 R22,5, konfigurasi gandar: 2 gandar, rem: retarder, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, jumlah tempat tidur: 2, ukuran ban belakang: 315/70 R 22,5, jumlah tempat duduk: 2, Perlengkapan: ABS, kendali jelajah, komputer bawaan, kunci diferensial, kunci sentral, lampu kabut, pemanas parkir, pendaftaran truk, pendingin udara, rem angin bertekanan, spoiler,

Kondisi: bekas, Detail Teknis: Berat: 400 kg Jumlah putaran: - putaran/menit Torsi: - kp Dimensi P x L x T: 1,24 x 0,84 x 1,0 m Dijual adalah satu set lengkap alat penahan, alat penjepit, dudukan, dan aksesori berkualitas tinggi dari inventaris mesin penggiling roda gigi Gleason-Pfauter P200. Inventaris ini mencakup sejumlah besar komponen yang dibuat dengan presisi dalam berbagai desain dan dimensi. Di antaranya terdapat: berbagai dudukan benda kerja dan alat penjepit Lodpfxozxxfts Ahroru dudukan dan mandrel penjepit presisi berbagai selongsong dan badan penjepit cincin dudukan dan adaptor dalam berbagai diameter dudukan dan pemegang alat rahang penjepit dan elemen pengganti terkait berbagai dudukan presisi dari produsen Jerman BUNA berbagai dudukan dan adaptor khusus berbagai aksesori tambahan lainnya sesuai gambar Di antaranya terdapat dudukan presisi BUNA yang ditandai No. 2457368.0, Ø32, A5, Buatan Jerman.