Beli M-Tec Mathis Technik Mixer M-Tec Lodige Ploughshare bekas (77.147)

Kondisi: bekas, 5tSWF Crane Technology Ltd. Pjdpfjdc A R Tsx Abwegn

Tahun pembuatan: 2005, Kondisi: bekas, Technical details: Load capacity: 5 t Trolley travel speed: 20.0/5.0 m/min Lifting height: 45 m Span (center-to-center): 2000 mm Lifting speed: 10.0 / 1.7 m/min Voltage: 230 / 50 V / Hz Total power requirement: 16 kW Double-rail trolley - electric wire rope hoist - Trolley travel speed: 20.0/5.0 m/min - Rope diameter: 8 mm; rope length approx. 2 x 48 m with double-sided rope drum - Classification: 2m load hook 180 mm - Drive: powered on both sides with motor - Internal distance between wheelsets: 1890 mm Pedpfxou Nvf Ho Abwjgn - FEM classification: 2m - Without control panel Sold as is, as offered. Subject to prior sale.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, diameter rol: 75 mm, lebar total: 1.000 mm, panjang pengangkutan: 3.500 mm, Roller conveyor 1000x3525mm, conveyor system, multiple units available /ct1967 Pgedjubahgjpfx Abwon Manufacturer: BUDDE Fördertechnik Length: 3525 mm Width: 1000 mm Height: 250 mm Roller length: 990 mm Roller pitch: 75 mm Can be linked/sorted, multiple units for sale

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Schraml Modula 16 Super 6, diproduksi tahun 1999 Mesin pencuci dan pengering kaca datar vertikal, tinggi pencucian 1600 mm, 6 sikat, bagian atas terbuka. Pgodszcxa Tspfx Abwjn Ketebalan kaca 3-12 mm, tinggi kerja 550 mm, arah kerja dari kanan ke kiri, bagian masuk 2800 mm, bagian keluar 2800 mm, panel lampu di bagian masuk dan keluar, sistem start-stop otomatis, sistem resirkulasi dengan tangki air dan pompa air. Mesin dalam kondisi baik dan tersedia segera.

Kondisi: bekas, Machine crossover with platform (bridge) 1900-750-2500 RA2414 Technical Data: Manufacturer: Munk Günzburger Steigtechnik Type: Machine crossover with platform Condition: very good (used) Overall dimensions: 1900-750-2500 mm (W x D x H incl. handrail) Step dimensions: 85 x 600 x 45 mm Step/riser height: 230 mm Platform dimensions: 800 x 650 mm Platform height: 1350 mm (underside), 1420 mm (top edge) Inclines: 6 (5 steps + platform per side) Pgjdpfx Abewpymijwon Maximum working height: 3450 mm Maximum load capacity: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, please contact us directly. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, daya: 7,5 kW (10,20 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, laju aliran volumetrik: 6.000 m³/jam, berat keseluruhan: 900 kg, inlet: 300 mm, tekanan negatif: 2.900 Pa, kecepatan rotasi (maks.): 3.000 rpm, We offer our Höcker Polytechnik Vacumobil JT300-L – industrial dust extraction system for sale. The Höcker Polytechnik Vacumobil JT300-L is a powerful, mobile industrial dust extraction unit, designed for continuous operation in demanding woodworking and manufacturing environments. This unit is equipped with automatic jet cleaning (filter cleaning with compressed air) and guarantees consistent suction performance with no downtime, making it ideal for workshops where multiple machines operate simultaneously. Key specifications: Motor power: 7.5 kW Airflow capacity: 6,000 m³/h Operating airflow: 5,100 m³/h Negative pressure: 3,100 Pa Pedpfx Absygw Rxswogn Filter surface area: 28 m² Extraction inlet: 300 mm Collection capacity: large system with multiple 500-liter collection bins Key benefits: Continuous operation thanks to the automatic pulse-jet cleaning system High extraction capacity – suitable for multiple machines (CNC, edge banders, planers, etc.) Industrial-grade safety features, including backflow prevention and integrated fire safety options Energy-efficient motor technology (IE3 / optional IE5) Robust and reliable German engineering Applications – perfect for: Woodworking workshops CNC machining centers Furniture manufacturing Medium to large industrial enterprises The JT300-L offers nearly double the capacity of smaller models (such as the JT200), making it the ideal solution for businesses looking to scale up production while maintaining a clean and safe working environment. We are also offering our smaller Höcker Polytechnik Vacumobil JT200-L for sale on Machineseeker. If you have any questions or would like more information, please feel free to contact us by message or phone.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, laju aliran volumetrik: 3.400 m³/jam, tingkat kebisingan: 71 dB, berat keseluruhan: 425 kg, diameter sambungan ekstraksi: 200 mm, laju aliran nominal: 3.400 m³/jam, tekanan negatif: 2.900 Pa, kecepatan rotasi (maks.): 3.000 rpm, dutch-machinery-listing-2024-001 Pgedpsygw Iqjfx Abwon

Tahun pembuatan: 2016, Kondisi: baru, The single-sided polishing machine is designed for both manual and robotic polishing of parts made from aluminium, steel, brass, and zinc die-cast. Technical specifications: Polishing wheel: max. Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max. 50 mm Extraction connection: Ø 100 mm Dimensions (LxWxH): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connected load: 4 kW Polishing spindle height on request Pgedoc Rfg Uspfx Abwon Made in Germany Warranty: 12 months Optional: Expansion with a frequency inverter will cost 950 euros per polishing machine. 1 piece frequency inverter, 1 piece potentiometer for control; 1 main switch

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: RPM500_OSZ2, Robotic polishing machine RPM500_OSZ2 with oscillation (50 mm) and traverse (100 mm) Pgsdod Dt D Iepfx Abwsn Polishing discs diameter – 1000 mm Drive power – 4 kW Extraction ports – 100 mm Two units available.

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: RPM 1000 D, Robot bekas - Mesin poles P 1000 D Pjdpfxexludxo Abwjgn Tipe: P1000 Versi kanan Piringan poles Ø 1000 mm

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: RPM 1000 ZO, Robot bekas - Mesin pemoles P 1000 ZO desain kanan Disc pemoles Ø 1000 mm Pgedpfx Abjxludlswon Dengan feed dan osilasi

Tahun pembuatan: 2016, Kondisi: baru, nomor mesin/kendaraan: 16-PMME-01, A single-sided polishing machine for manual processing and polishing of parts made of aluminium, steel, stainless steel, brass, and zinc die-cast is being offered for sale. Technical Data: Polishing wheel: max. Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max. 50 mm Height to polishing spindle: 1,100 mm Extraction port: Ø 100 mm Dimensions (LxWxH): 600 x 600 x 1,500 mm Weight: approx. 150 kg Connection voltage: 3 x 400 V Connected load: 4 kW Made in Germany Pgsdpfxsc Rwnge Abwjn Warranty: 12 months Optional: An upgrade with a frequency inverter will cost 950 euros per polishing machine. Includes: 1 frequency inverter, 1 potentiometer for control, 1 main switch.

Kondisi: diremajakan ulang (bekas), S&F Vibrating Screen Machine | ASM-100 Screening Machine factory reconditioned (completely overhauled) with new bearings (flange bearings) and new oscillating elements (rubber buffers) Manufacturer: S&F GmbH Pgodozbvy Uopfx Abwjn Model: ASM-100 Year of manufacture: 2022 Screening capacity: approx. 10 - 12 m³/h (for wood chips, depending on material) Fractions: 3 Screen area: 2.0 m² per screen mesh size Screen decks: 2 units Mesh opening: - 1st screen deck: perforated plate screen, D = 40 mm or as agreed - 2nd screen deck: perforated plate screen, D = 8 mm or as agreed Drive power: 1.1 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Version: ECO Line Machine weight: approx. 650 kg Machine color: RAL 7040 window grey // Protective housing: RAL 3020 traffic red Screen inserts selectable as required Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screening machine | Flat screen | Vibrating screen | Roller screen | Screening machine for wood chips | Screening machine CHP

Kondisi: diremajakan ulang (bekas), S&F vibrating screen machine | Screen machine type ASM-200 factory-refurbished (completely overhauled) with new screen box, new bearings (flange bearings), and new oscillating elements (rubber buffers) Manufacturer: S&F GmbH Model: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screen surface: 2.0 m² per mesh size Screen decks: 2 units Mesh size of the screen: - 1st screen deck: punched perforated plate, D = 40 mm or as required - 2nd screen deck: punched perforated plate, D = 8 mm or as required Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Version: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 7040 window grey // Safety housing: RAL 3020 traffic red Screen inserts freely selectable Suitable for screening, among other bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Pgsdpfx Abozbvy Iowen Vibrating screen | wood chip screen | vibrating screening machine | flat screen | vibrating screen | rotary sifter | screening machine for wood chips | CHP screening machine

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): Pedsgl Nlmopfx Abwsgn * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Pgjdpfsv Rpxlsx Abwsn Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Pgjdpfx Asgfm Ryjbwsn Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V Psdjrb D Nspfx Abwegn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Pedpfx Aedwktksbwsgn - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Pgodjffh Atjpfx Abwen Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: Pgjdogmfa Ajpfx Abwon - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force 40 t Upright clearance 695 / 215 mm Pgsdpfxjtqqq Re Abwsn Stroke 100 mm Table clamping surface 650 x 440 mm Ram surface 580 x 285 mm Installation height 400 mm Total power requirement 15 kW Machine weight approx. t Machine dimensions (L x W x H) 1.63 x 1.05 x 2.61 m - with draw cushion - with SICK light curtain

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, kapasitas hisap: 1.200 m³/jam, tinggi total: 2.970 mm, panjang total: 930 mm, lebar total: 930 mm, berat keseluruhan: 250 kg, The mechanical dust filtration systems from LTA (JUNKER Group) capture and remove dust as well as smoke in industrial applications. They utilize cartridge or bag filters to reliably separate even the finest particles. Psdpev S E Ncofx Abwogn Thanks to automatic filter cleaning, they provide consistently high separation performance and are available as both mobile and stationary systems.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 800 mm, tinggi total: 2.000 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, masa garansi: 12 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, arus masuk: 16 A, lebar yang dibutuhkan: 800 mm, panjang gelombang laser: 1.064 nm, tinggi kerja: 900 mm, persyaratan ruang panjang: 900 mm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, Perlengkapan: ekstraksi asap, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser for permanent marking has become indispensable. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with mount running Windows operating system and laser software. Optionally, the LAS 28 XL laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., can be implemented. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150 x 150 mm (optionally larger) • Marking software EZCAD in German / English • Signal tower to indicate operational status • Optional: rotary axis (3-jaw chuck) Pgedpoywg Sbofx Abwen • Optional: digital height measuring system • Optional: fume extraction (incl. activated carbon filter) • Optional: extension arms for large parts (single- or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z axis • Laptop including mount with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (L x W x H) • Weight: approx. 120 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 140 kg, panjang total: 900 mm, lebar total: 800 mm, tinggi total: 2.000 mm, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The universally applicable laser marking system LAS 28 XLe by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent markings, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and no advanced programming knowledge. Serial and article numbers can be incremented automatically by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. A handheld scanner can also be used. The standard configuration includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal lamp for operating status display Pgedpfsxuvk Ejx Abwen • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminium profile • Air cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Power connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg