Beli Mesin Pengikat Tepi Satu Sisi-Batch 1 bekas (119.548)

Kondisi: baru, Tahun pembuatan: 2026, Hebrock K 36 Top, dilengkapi dengan Pengaturan Motorik - - Mesin Baru - Mesin Hebrock yang sangat populer ini menawarkan kemungkinan yang tak terduga. Dirancang untuk memenuhi standar tertinggi, K 36 mewakili keandalan dan produktivitas mutlak dalam penggunaan sehari-hari. Dengan kemampuan untuk melengkapi mesin dengan pah bertingkat dan pisau penarik multi-radius, Hebrock menetapkan standar baru dalam bidang pemrosesan tepi yang sempurna dengan berbagai ketebalan tepi. Ketebalan tepi maks.: 3 mm Ketebalan benda kerja maks.: 60 mm Siap beroperasi dalam 6 menit. Rcodpoi Am Uksfx Ahuof Ketebalan tepi maks. 3 mm Ketebalan benda kerja min./maks. 8 – 60 mm Panjang benda kerja min. sekitar 140 mm Kecepatan umpan sekitar 15 m/menit. Siap beroperasi sekitar 6 menit. Konsumsi daya maks. Ø sekitar 7,4 kW Koneksi listrik 400 V – 3 Fase – 50 Hz Tinggi meja kerja sekitar 900 mm Dimensi mesin sekitar 5250 x 1230 x 1430 mm (PxLxT) Berat 1750 kg Peralatan: Hebrock K 36. - 15 m/menit Mesin pelapis tepi K36 Dengan kontrol PLC (termasuk layar sentuh 15”), aplikasi lem cair pada benda kerja untuk material tepi hingga 3 mm; pah penggabung (termasuk alat berlian) hingga kedalaman pemotongan 3 mm, bak lem berlapis bebas perawatan dengan persiapan bak pengganti termasuk perangkat pembuangan lem, stasiun pemotong gergaji dengan motor ganda HF (sekitar 12.000 RPM), stasiun pemotong HF (sekitar 12.000 RPM) dengan pengaturan pemotongan pneumatik dan pah pengganti (desain kombinasi), pah pembulat sudut, pisau penarik radius, pisau penarik permukaan (termasuk perangkat penggalian pneumatik), stasiun pemoles, penggerak rantai yang kokoh, penekan rol ganda dengan bantalan bola, jendela tampilan unit dari sisi belakang mesin dan sisi operator, lampu sinyal untuk urutan benda kerja, penopang benda kerja yang dapat ditarik, umpan sekitar 15 m/menit, pelapisan hingga ketebalan benda kerja 60 mm 36/08/1 Persiapan penggantian cepat untuk pah sudut 36/08/2/1 motor pengganti tambahan untuk pah sudut R=1 36/09/1 Pisau penarik multi-radius 36/24/1 Perangkat penyemprot pelumas 36/24/2 Perangkat penyemprot pembersih 36/25. Penyemprot pelindung tepi 36/27 Nesting (1 stasiun pemotong + 1 pisau penarik radius) 36/30 Pengaturan pneumatik 3 titik 36/30/1 Multitool untuk stasiun pemotong HF (R2/R1/Chamfer) 36/45 Paket poros, pengaturan motorik untuk ketebalan pelat dan tepi serta pengaturan kedalaman pah penggabung Lokasi: dari gudang 54634 Bitburg tersedia setelah perjanjian

Kondisi: bekas, Tahun pembuatan: 2021, Numerical control MEGA 300 TS Panel height: 60 mm PVC/ABS thickness: 3 mm Rcedpfx Ahst Hal Dsujf Feed speed up to 22 m/min Electronically adjustable working height via CNC Powered pressure belt with increased pressure Entry system for small panels Panel support rail with electronic CNC adjustment Side roller track with idler rollers for panel support Anti-adhesive unit Rectifier unit with two electronically adjustable motors via CNC Roller holder plate for sensitive edges Edge magazine with 2 positions Glue unit for EVA adhesive with glue pot and premelter Edge pressing unit for straight profiles with electronically adjustable pressure rollers by CNC Anti-adhesive group Milling unit with 2 motors, automatically adjustable inclination End trimming unit with 2 vertically stacked motors Trimming/scoring group with 2 tilting motors, electronically adjustable by CNC Corner rounding unit with 4 motors Edge scraping unit, electronically adjustable via CNC Glue scraper unit Oscillating brush unit Hot air dryer unit

Kondisi: sangat baik (bekas), SCM Contura in excellent condition Rcsdpet E T I Nofx Ahuof

Kondisi: bekas, Tahun pembuatan: 1993, with pre-milling used, good condition Manufacturer: Ott Model: Kantomat 156-FÜ Year of manufacture: 1993 Edge thickness: 15 mm Workpiece height: min. 10 mm, max. 60 mm Workpiece width: min. 60 mm Workpiece length: min. 60/160 mm Thick edges up to 3 mm Cutting from the roll up to 3 mm Pre-milling End trimming unit K 14 / 2 x 1.1 HP Flush milling HF15.1 2 x 1.5 HP Chamfering 082 2 x 0.8 HP, adjustable 0–45° Radius milling 2 x 0.8 HP Radius scraper, pneumatically controlled Buffing, oscillating, pneumatic feed 2 x 0.3 HP automatic edge magazine feed speed steplessly adjustable granulate fast-heating pot soundproof hood large roller support extraction port D 160 mm Space requirement approx. 7400 mm x 1000 mm x 1600 mm total connected load 22 kW Location: 97447 Gerolzhofen, free loaded, unpacked Rcedpfx Aovwfyfehusf Delivery in as-inspected condition, as seen, without guarantee or warranty

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, year of manufacture 2006: Configuration: - Infeed fence adjustable manually - Jointing unit adjustable manually - EVA edge banding - Pressure zone for edging material adjustable via servomotor - End trimming saws pneumatically adjustable - Radius milling (top and bottom) adjustable manually - Corner rounding unit, 2-motor, adjustable manually - Radius scraper R2 pneumatically switchable - Flat scraper - Polishing brushes - Control panel Power Control PC20+ Rcedpfxoq A N Nus Ahusf Working height adjustable via servomotor Material height: 8 - 50 mm Edge material thickness: 0.4 - 8.0 mm Feed speed: 11 m/min Total length (incl. feeder table): 5860 mm Total weight: 2660 kg Very good condition, fully functional!

Kondisi: baru, Edge banding machine minimax me 35 tr s Holzkraft -Demonstration machine- Rjdpfx Ahjv Nhhpjujcf This offer is a package deal. The following items and options are already included in the price: - new demonstration machine -

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 860 x 1060 x 1060 mm Weight: 280 kg Total power requirement: 3 kW Edgebander model: CONTOUR 350 DELUXE - Motor power: 0.4 kW - Heating power: 2.2 kW - Feed speed: infinitely variable, 0-14 m/min - Voltage: 400 V / 50 Hz - Min. workpiece thickness: 10 mm - Max. workpiece thickness: 40 mm - Edge thickness: 0.3 - 3 mm - Edge width: 15 - 50 mm - Compressed air connection: 6 bar - Min. internal curve radius: 20 mm Rcedpfx Asvz En Rshuef - Suitable for applying edging to curved workpieces - Glue application on straight and curved edges - Glue application on both the workpiece and the edging tape - Automatic length trimming - Glue temperature electronically and continuously adjustable - Installation dimensions: 1600 x 1150 x 965 mm - Transport dimensions: L=860 mm, W=1060 mm, H=1060 mm - Net weight: 280 kg - Gross weight: 340 kg

Kondisi: baru, Tahun pembuatan: 2025, dimensions (length/width/height): 1480 x 760 x 1160 mm Weight: 180 kg Total power requirement: 3.5 kW Edge sanding machine KOS-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt rear panel: 850 x 200 mm - Belt speed: 20 m/sec - Table stroke up to 200 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Extraction connection: 100 mm - Separate oscillation drive with geared motor - Height-adjustable cast iron table, double column-guided Rcedpfxjvz Hppo Ahuof - Dual extraction system for the main sanding unit and round sanding table - Sanding unit infinitely tiltable up to 45° - Graphite-coated running surface - Incl. mitre fence with angle scale - Incl. pull-out table extension with multi-roller system - Incl. sanding belt - Dimensions: L = 1480 mm, W = 760 mm, H = 1160 mm - Net weight: 180 kg - Gross weight: 230 kg

Kondisi: bekas, Tahun pembuatan: 2007, dengan unit pengumpan Rsdpfx Ahevwgizjuocf untuk komponen berbentuk dengan indikasi lem panas Kondisi sangat baik dibersihkan, diuji fungsi, diuji, uji coba dijalankan bekas, kondisi baik merek Artech-Biesse tipe Single tahun pembuatan 2007 No. mesin 91009 teruji tipe CE dengan pemotongan pinggir otomatis, pelapisan tepi bulat meja miring – pelapisan tepi miring perluasan meja yang dapat ditarik dengan penyangga rol sistem pengumpan – pengaturan kontinu Ketebalan tepi 0,4 - 3,0 mm Tinggi benda kerja min 10 maks 120 mm Kebutuhan ruang sekitar 1400 mm x 1000 mm x 1600 mm Berat sekitar 320 kg Daya total terpasang 5,2 kW Lokasi stok: 97447 Gerolzhofen, bebas dimuat, tanpa kemasan Penyerahan dalam kondisi aktual seperti dilihat, tanpa garansi dan jaminan.

Kondisi: baru, Tahun pembuatan: 2026, Hebrock F 5 Jika Anda menginginkan kinerja maksimal, Hebrock F 5 adalah solusi untuk proses pelapisan tepi pada bengkel kerajinan yang membutuhkan standar tinggi. F 5 menjamin pemrosesan tepi pada setiap langkah, karena dilengkapi dengan semua komponen yang Anda butuhkan untuk memenuhi kebutuhan Anda: mesin penggiling sambungan, mesin pemotong, unit penggiling, pisau pelapis radius, mesin penggiling sudut, pisau pelapis permukaan, stasiun pemoles. Untuk fleksibilitas yang lebih besar dalam mencapai hasil akhir yang sempurna, F 5 dapat dilengkapi secara opsional dengan pisau pelapis multi-radius yang praktis. Ketebalan tepi maks.: 3 mm Ketebalan benda kerja maks.: 50 mm Siap digunakan dalam 3,5 menit Peralatan: Rjdpfxsi Anado Ahujcf Hebrock F5 Next - 10 m/menit Mesin pelapis tepi F5 Next Dengan kontrol SPS (termasuk layar sentuh) dan dengan pemberian lem panas pada benda kerja untuk bahan tepi hingga 3 mm; mesin penggiling sambungan (termasuk alat berlian) hingga kedalaman penggilingan 2 mm, bak lem tanpa perawatan dengan persiapan bak pengganti termasuk perangkat pembuangan lem, stasiun pemotong HF (sekitar 12.000 RPM), stasiun penggiling HF (sekitar 12.000 RPM) dengan penyetelan penggiling pneumatik terpisah dan pisau penggiling pelat yang dapat diganti (versi kombinasi), mesin penggiling sudut, pisau pelapis radius, pisau pelapis permukaan (termasuk pengeluaran pneumatik), stasiun pemoles, penggerak rantai yang kuat, tekanan atas ganda dengan bantalan bola, jendela pandang dari bagian belakang mesin, penopang benda kerja yang dapat ditarik, kecepatan umpan sekitar 10 m/menit. Hebrock F5 F5/08/4 Persiapan penggantian cepat untuk mesin penggiling sudut F5/08/5 motor pengganti tambahan untuk mesin penggiling sudut dengan perlengkapan alat F5/09/4 Pisau pelapis multi-radius (R1/R2) F5/10 Rangka F5/14 bak pengganti tambahan F5/24/1 Perangkat penyemprotan agen pelepas F5/24/2 Perangkat penyemprotan agen pembersih F5/25 Perangkat penyemprotan tepi F5/27 Sarang untuk mesin penggiling dan pisau pelapis radius F6/28 Penyemprotan tekstur akhir F5/30 Penyetelan pneumatik 3 titik (penggilingan radius, miring, rata) F5/31 Penyambungan hingga 50 mm F5/32 Lampu LED Lokasi: Tersedia di gudang 54634 Bitburg Tersedia segera - ada di gudang

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. Redpfx Asi Am U Dehuecf F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2026, Edge thickness 0.4 - 3 mm Panel thickness for gluing 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued panels 60 mm Mechanical feed speed 8 / 11 / 13 m/min Adhesive temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Primary milling spindle speed 12,000 rpm Radius for edge rounding R=2 mm Working pressure / compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating device 1.5 kW Grooving unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Conveyor belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: Diamond cutters Gluing Cutting Milling: two motors Radial scraper Flat scraper (self-adhesive) Spray system Rcjdpsv Dt Spofx Ahuef Polishing Internal lighting Automatic lubrication

Kondisi: baru, Tahun pembuatan: 2026, Minimum / Maximum veneer thickness: 0.4 - 3 mm Minimum / Maximum veneer height: 12 - 47 mm (optionally up to 60 mm) Minimum / Maximum material height: 10 - 45 mm Minimum material width: 100 mm Minimum material length: 100 mm Pre-milling unit: 2 motors (diamond cutters), each 2.2 kW Feed motor power: 2.2 kW Eye-level control panel: Chain feed system: Pressure plate for PVC and ABS edging: Mechanical pressure zone driven by the main pressure roller and a set of pressure rollers to minimize the glue layer: Central pressure adjustment: Glue granulate container: Application of glue to the material with a glue roller: Electronic temperature control, working temperature 180 - 200 °C Pneumatic end trimming unit: Element gap indicator: Dual cross-cut saw for trimming excess material at the front and rear: Precision linear guides: Dynamic cutting for high cutting accuracy: Veneer feed speed: 9.5 m/min Flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm Scraper unit: Polishing unit top/bottom 2 x 0.18 kW, 50 Hz, 2800 rpm Height and tilt adjustment: Exhaust ducts 3 x ø120 mm, 1 x ø100 mm Roller table extension: 250 mm Soundproof enclosure with viewing window at the aggregates: Milling unit: 0.44 kW Glue roller unit: 0.55 kW Glue tank heating: 2.2 kW Compressed air connection: 6.5 bar Total connected load: 9 kW / 400 V Dimensions (L x W x H): 3590 x 1220 x 1686 mm Weight: 1100 kg • Pre-milling with counter cutters positioned on heads for highest processing quality. Rcedpfov Dutbjx Ahuof • Front and rear end-trimming with double saw. • Top and bottom edge milling with separate cutter. • Radial or straight scraper (choice). • Polishing unit. • Equipped with a control computer with LCD display. • Very easy operation by switching individual units on/off at the press of a button. • In summary, an ergonomic and precise machine at a very attractive price, unrivaled on the global market. • Interchangeable glue tank function as standard.

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.8 / 3 Panel thickness (min/max) mm 10 / 50 ICOS Open CNC control Feed speed m/min (adjustable) 6 - 30 Adjustable fence, CNC controlled Jointing unit (CNC-controlled) 1 x 75.186 (1 x 4.5 kW) + 2 x 08.378 (2 x 4.5 kW) Redpfjy Spcljx Ahuecf Gluing unit (premelter with laser) IMA Laser System LASERLINE (year 2025) Pressure zone + edge magazine for rolls (No. 12 positions) End trimming unit 08.42/30/B (0.66 kW x 2) Speed 20+30 m/min (0° - 25°) Sprayer unit (for liquid non-stick agent) Pre-milling unit 08.0555 (1 x 2 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (0.66 kW x 1) 4 profiles Contour milling unit (fine milling) CNC-controlled KFA 30 (0.5 kW x 1) max 30 m/min Standard milling unit for grooving/rebating (CNC-controlled) Multi-profile scraper unit (CNC-controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) RIEPE (also for PMMA) OPTIONAL: Automatic return system "GELDMEIER" (SOFIT Ref. No. O11043)

Kondisi: bekas, Tahun pembuatan: 1988, Used, good condition Manufacturer: Brandt Type: F10 + EK 11 - End Capper Rsdpfx Ahevwf Txoujcf Year of manufacture: 1988 Machine No.: 0-260-01-2188 / 0-260-01-2746 Required space approx. 1100 mm x 1100 mm x 1700 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without overhaul, without warranty or guarantee

Kondisi: baru, Tahun pembuatan: 2026, Height of processed elements: 8-45 mm (optional: veneer up to 60 mm) Minimum workpiece length: 100 mm Minimum workpiece width: 100 mm Edge thickness: 0.4-3.0 mm Feed speed: 9.5 m/min Cutting unit – motor power: 1 x 0.27 kW Milling unit: 2 x 0.35 kW Milling unit speed: 12,000 rpm Corner rounding unit – minimum length of processed elements: 250 mm Corner rounding unit – motor power: 1 x 0.35 kW Corner sanding unit speed: 12,000 rpm Jointing/milling unit: 1 x 1.1; 1 x 0.75 kW Pre-milling unit speed: 12,000 rpm Edge trimming unit: Glue removal unit: Polishing unit – motor power: 2 x 0.18 kW Polishing unit speed: 2,800 rpm Roll-out support with rollers: Exhaust pipe diameter: 120 mm Compressed air: 6.5 bar Redpfx Ahev Duvvoujcf Total power: 6.7 kW Dimensions (L x W x H): 4200 x 800 x 1500 mm Weight: 1,180 kg + €2,000 for the variant with PUR glue tank

Tahun pembuatan: 1990, Kondisi: bekas, Power connection 400 V 3 kW Glue roller Milling unit 2x flush Roll material up to 0.4 mm Rcedpekkfk Njfx Ahujf Dimensions (LxWxH): 3150 x 680 x 1250 mm Weight approx. 400 kg Conversion to 2 mm PVC edging possible = Surcharge €1,000.00

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Unit penggabungan Penggaris penggabungan dikendalikan program 0-5 mm Majalah otomatis untuk edging gulungan Majalah otomatis untuk edging kayu solid Pisau potong untuk edging gulungan Zona penekan dikendalikan program dengan 1 roller pratekan dan 5 roller pascatekan Unit lem dapat dibersihkan, lem PU Unit potong linear dapat diputar Unit milling sejajar 2x1,9 kW Unit milling radius Pisau silet radius Unit milling copy dengan 2 motor Pisau tarik permukaan Redpov I Sayofx Ahuecf Kontrol layar sentuh Ketebalan edging hingga 20 mm Panjang mesin 7,90 m

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Schiatti Angelo FPS15 single-sided straight-line edging machine with arris 4x surface spindles (2x diamond, 2x polisher) Rjdpfx Ahswd Eydjuocf 4x arris spindles (2x diamond, 2x polisher) - Glass thickness: 3–20 mm - Minimum dimensions: 150 x 150 mm - Maximum load capacity: 1,000 kg - Working height: 765 mm - Heavy-duty, long-lasting conveyor belt guided by ball bearings - Springs for automatic thickness adjustment - Wastewater collection tray - 2 meters infeed and outfeed - Total length: 6,977 mm

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Flush trimming unit (top and bottom) RS-100 2-motor multifunction/form milling unit CR-202 (FAST system with 4 standard positions) Rsdpfx Asv R Nk Uehuecf Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Maximum workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness, coil: 0.4–3 mm Edge thickness, strips: 0.4–22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing milling extraction connection: 120 mm Glue tank capacity: approx. 3 kg Heating time with 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Kondisi: sangat baik (bekas), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Diamond jointing cutters with conventional and counter-rotation - Glue pot located underneath - Glue pot quick-change device - Suitable for use with PUR adhesives - GLUEBOX system - Pressure unit with powered roller - Trimming saw with 2 HF motors - Pneumatically swiveling trimming saw - Flush / radius milling unit - Motorized positioning control for milling unit - x-motion PLUS - Corner copying unit with diamond-coated cutter - Radius scraper blade - Radius scraper blade with motorized positioning - Surface scraper blade - Surface scraper blade with position-controlled actuation - Infeed lock - Spray unit for separation agent - Spray unit for lubricant - Spray unit for cleaning agent - Year of manufacture: 2022 ----- Technical Data ----- Edge thickness, coil material: 0.4 – 3 mm Edge thickness, strip material: 3 – 6 mm Redpfx Asu R S Nwohuscf Workpiece thickness: 8 – 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen size: 15 inch Jointing cutter dimensions: D 80 x 64 mm Jointing cutter power: 1.1 kW Trimming saw power: 0.35 kW Milling station power: 0.75 kW Extraction connection Ø: 80 + 160 mm Compressed air connection: 7 – 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical components checked - Pneumatic components checked - Ready for immediate use

Kondisi: baru, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration machine- New: GLUJET GJ725 This offer includes an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W controller - ECO MODE energy-saving function - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation Rcodpfx Aeu R Sy Ajhujf - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifuntional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Carbide reversible knives for scraper holder - Chip collection box for scraper unit - Buffing unit 1940 - Spray unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and glue quantity control - Long infeed fence 1,252 mm - Motorized infeed fence adjustment - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelf board program - Flat scraper FK701 - Spray unit GM301 after pressure unit - new demonstration machine -

Kondisi: baru, Tahun pembuatan: 2025, Measurements (Length/Width/Height) 1050x830x1100 mm Weight 133 kg Total power requirement 2.1 kW Rsdevz E Hmspfx Ahuecf Edgebanding Machine KAM535NEO - Motor power S1 250 (+1750) W - Voltage 400 V / 3 / 50 Hz - Feed speed 0–15 m/min - Table size 1000 x 700 mm - Table height 850 mm - Min. workpiece thickness 10 mm - Max. workpiece thickness 50 mm - Edge width 13–54 mm - Edge thickness 0.3–3 mm - Working air pressure 4–5 bar - Operating temperature 170 °C - Min. internal curve radius 20 mm - Sound pressure level dB(A) < 70 - Packing width 830 mm - Packing length 1,050 mm - Packing height 1,100 mm - Gross weight 161 kg - Net weight 133 kg - Semi-automatic edgebanding machine - The machine is suitable not only for straight edges but also specifically for edging curved edges - Direct glue application on straight and curved edges - Double-sided glue application on laminate and edge - Automatic length cutting - Glue temperature electronically adjustable - Feed speed variably adjustable - 1750 W heating power - 250 W feed motor

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 1820 x 585 x 1450 mm Weight: 500 kg Total power requirement: 4 kW Edgebander KANTOMAX EASY - Min. / Max. edge thickness: 0.4 – 3 mm - Min. / Max. edge height: 15 – 48 mm - Min. / Max. workpiece height: 12 – 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8 m/min - Control panel positioned at machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up pressure rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot with Teflon coating for EVA hot-melt granulate - Glue application via glue roller - Electronic temperature control, working temperature 180–200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - End trimming saw unit for front and rear edge overhang, high-precision linear guide, motor 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm - Total power consumption: 4.0 kW / 400 V - Extraction connector Ø 100 mm - Extendable workpiece support - Noise protection enclosure with inspection window Redpovz Hd Hsfx Ahujcf - Compressed air connection: 6 bar - Dimensions: L=1820, W=585, H=1450 mm - Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, OTT PACIFIC bekas dan berfungsi dijual! Panjang mesin: 6,30 m! Rcsdpfx Ajxc Hhkehusf