Beli Minster (Usa) Mesin Meninju Otomatis bekas (77.521)

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers Njdpsfz I Hxefx Aa Uect • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches Ncsdefz Nblspfx Aa Ujt • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Ncsdpfx Aasfy T Rco Ujt Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar sabuk konveyor: 635 mm, masa garansi: 24 bulan, lebar total: 3.700 mm, panjang total: 1.235 mm, tinggi total: 1.250 mm, tegangan masuk: 400 V, panjang meja: 3.320 mm, berat kosong: 280 kg, lebar bukaan: 45 mm, lebar kerja: 635 mm, panjang rol: 660 mm, kebutuhan tinggi: 2.170 mm, persyaratan ruang panjang: 1.235 mm, lebar yang dibutuhkan: 2.150 mm, en-Neumaschine-Rondostar-4000-ECO New Machine – Rondostar 4000 ECO Successor model to the SFE 6607H Advantages: + Premium quality, made in Switzerland, with 2-year warranty + Machine features a fully stainless steel housing + Equipped with automatic flour duster + Automatic roller adjustment + Automatic winding unit + Dough sheet is wound without significant tension + Integrated electric motor + High-quality synthetic conveyor belts, easy to clean + Easily movable, with swivel castors and locking feet for stable positioning + Operation via touch panel + Computer control (100 programs) and manual operation via push buttons available + Tables can be folded up on both sides + Scrapers can be removed easily and without tools + Machine is equipped as standard with one manual winding unit + Manual winding unit supports left and right + Equipped with dough catching trays on both sides Technical Data: - Dough piece weight: max. 15 kg (depending on product) - Belt width: 635 mm - Roller width: 660 mm - Safety guard clearance: 90 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm up to 45 mm (depending on product) - Speed: approx. 85 cm/sec - Motor power: 1.1 kW / 2 kVA - Electrical requirements: 400 V – 3Ph – 50/60Hz Nsdpfoivdmbsx Aa Usct - Protection: 16A CEE plug - Dimensions: --- Working position: 3700 x 1235 x 1250 mm (WxDxH) --- Rest position: 2150 x 1235 x 2170 mm (WxDxH) - Net weight: 310 kg

Kondisi: baru, Tahun pembuatan: 2026, daya: 2,2 kW (2,99 hp), ketinggian potong (maks.): 300 mm, lebar pemotongan (maks.): 560 mm, jenis kontrol: manual, rentang pivot: 60 °, jenis aktuasi: hidrolik, kecepatan rotasi (maks.): 100 rpm, kecepatan rotasi (min.): 80 rpm, Perlengkapan: Penandaan CE, dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, CRONOSS 300X560 YDG Pivot Type, Semi-Automatic Band Saw Machine with Angle Cutting (Rotary Head) The CRONOSS 300X560 YDG is a robust, pivot-type semi-automatic band saw machine designed for medium-scale metal cutting operations. It features a rotary head enabling precise and repeatable angle cuts between 0° and 60°. A reliable cutting solution for steel construction workshops, machinery manufacturers, and metalworking facilities. Standard Features - Hydraulic vise - Variable speed control (Inverter driven) - Safety switches - Hydromechanical blade tensioning system - Infinitely adjustable angle cutting from 0° to 60° (Rotary Head) - Angle scale - Adjustable head descent system - 1 band saw blade included - 2 material support rollers Country of Origin: Turkey Available models with diameters ranging from 220 mm to 3000 mm. Technical Specifications – 300 YDG Capacity 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 560 mm Capacity 60° - Round: 200 mm Nsdpfsyntzpex Aa Usct - Square: 180 x 180 mm - Rectangle: 180 x 245 mm Capacity 45° - Round: 300 mm - Square: 235 x 235 mm - Rectangle: 235 x 360 mm Motor & Technical Details - Main Motor: 2.2 kW - Hydraulic Motor: 0.37 kW - Coolant Pump Motor: 0.09 kW - Band Saw Blade Size: 34 x 1.1 x 4100 mm - Material Feed Height: 809 mm - Vise Max Opening: 600 mm - Vise Min Closing: 0 mm - Roller Table Width: 615 mm - Dimensions (H x W x D): 1268 x 2035 x 2862 mm - Weight: 900 kg Production & Supply The CRONOSS 300X560 YDG is manufactured in Turkey. Customized capacities and configurations are available upon request. Please contact us for detailed technical information and a price quote. Suggested Keywords: Band Saw Machine, Semi-Automatic Band Saw, Pivot Type Band Saw, Rotary Head Band Saw, Metal Cutting Machine, Steel Cutting Band Saw, Industrial Band Saw, Hydraulic Band Saw, Angle Cutting Band Saw, 300 mm Band Saw, 300x560 Band Saw, Workshop Band Saw Machine, Structural Steel Cutting Machine

Kondisi: baru, Tahun pembuatan: 2026, diameter mata gergaji: 400 mm, Rentang pemotongan baja bulat pada 90°: 120 mm, Rentang pemotongan baja bulat pada 45°: 110 mm, kecepatan rotasi (maks.): 60 rpm, masa garansi: 12 bulan, kecepatan mata gergaji: 60 rpm, Rentang pemotongan baja persegi pada 45°: 110 mm, Kisaran pemotongan baja persegi pada 90°: 120 mm, diameter pemotongan: 120 mm, Perlengkapan: dokumentasi / manual, Semi-Automatic Double-Head Vertical Tube and Profile Cutting Saw Machine Product Overview The semi-automatic double-head vertical tube and profile cutting saw machine is designed for series, precise, and repeatable cutting of round tubes, square, and rectangular profiles in industrial production lines. The right saw head is fixed while the left saw head features an automatically moving structure controlled by a servo motor. Its gearbox system, suitable for heavy-duty applications, cast table construction, and precision cutting mechanism ensure stable cutting quality and extended machine lifespan. Key Features - Semi-automatic double-head vertical tube and profile cutting saw machine - Fixed right saw head; left saw head with servo motor-controlled automatic traverse - Left head system operating on roller-type linear guides - Heavy-duty helical gear reducer with hardened and ground helical gears - Vertical cutting movement of saw heads: - Ball screw - Servo motor controlled - Long-life and high-precision roller-type linear guide system - Cutting units mounted on complete cast tables - Variable-speed cutting: - Slow at entry - Fast in the middle section - Slow again at exit - This reduces the total cutting time by approximately 30% and extends saw blade life - Inverter-controlled saw rotation speed between 20 – 60 rpm - PLC-controlled color touchscreen panel Cutting Capacity (Tube & Profile) Maximum Saw Blade Diameter: 400 mm Cutting Angles and Capacities Angle Round Tube (max.) Square Profile (max.) Rectangular Profile (max.) 90° Ø 120 mm 120 × 120 mm 160 × 90 mm ±45° Ø 120 mm 110 × 110 mm 140 × 90 mm +60° Ø 110 mm 90 × 90 mm 90 × 90 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 9.5 kW - Current: 35 A - Saw Motor: 3 kW - Coolant Pump: 0.06 kW Ncjdpfx Aajyg H R Ij Uot - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 60 rpm (Inverter controlled) - Angle Rotation: 90° / ±45° / +60° Saw Blade Specifications - Saw Blade Diameter: 400 mm - Saw Blade Bore Diameter: 40 / 50 mm - Pin Holes: 4 – 15 – 80 Coating Options: - TiN: For medium-hard steels - TiCN: For high-hardness steels - TiAlN: For stainless steels Machine Dimensions & Weight - Width: 4200 mm - Depth: 1200 mm - Height: 1800 mm - Net Weight: 2520 kg - Gross Weight: 2540 kg

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1102, For sale: TENON spacer frame bender. The machine features a Polish-language menu and is in very good condition, currently in continuous operation. It is equipped with a Polish-language user interface. Nsdpfx Aaswp Szlj Uect

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 50 h, Automatic slat production machine The automatic acoustic panel stapling machine is equipped with an advanced three-axis NC control system, ensuring exceptional precision and flexibility in the production process. Below are the specific advantages of each axis: 1. X Axis: Precise Horizontal Stapler Positioning - The X axis is responsible for the exact horizontal positioning of the staplers along the panel. This enables staples to be placed precisely at designated points, ensuring uniform stapling quality across the entire length of the panel, regardless of its size. 1. Y Axis: Vertical Movement - The Y axis enables vertical movement of the stapler, allowing panels to be stapled in different locations, regardless of their size or shape. This allows processing of panels with non-standard dimensions while maintaining full precision. 1. Z Axis: Depth and Stapling Force Control - The Z axis manages the depth and force with which staples are driven into the panel. This allows the process to be tailored to the thickness and hardness of the material used in the acoustic panel. Consequently, the staples are anchored with optimal strength, ensuring product durability and aesthetics, while minimizing the risk of material damage. ### Automatic Re-Tooling Automatic retooling is one of the key features of the stapler, significantly impacting production efficiency. This function allows: - Fully automatic retooling of the X, Y, and Z axes. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control over the Production Process: - Through MES and ERP integration, complete control over every stage of production is possible. 2. Optimization of Media and Material Consumption: 3. Production Planning Optimization: ### Significant Reduction in Operator Workload Automation of the acoustic panel stapling process has a direct effect on reducing the workload of shop-floor staff: - Elimination of manual control necessity - Increased work efficiency ### Capability for Media Demand Analysis Algorithms Thanks to advanced integration with production management systems, the stapler enables the creation of algorithms that analyze production media demands: 1. Media Demand Analysis: 2. Adapting Production to Changing Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also serves as a tool for advanced OEE analysis, a key operational efficiency indicator: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler's performance. This tool enables rapid identification of areas needing optimization, such as downtime reduction, product quality improvement, or increased machine efficiency. 3. Early Detection of Problematic Areas: 4. Production Planning Optimization: Ncsdpfx Aaoy Sw I No Ujt ### TPM (Total Productive Maintenance) and Automated Technical Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability…

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, de_001 Ncodpfxsxx Rtce Aa Ust

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.100 mm, penyesuaian silinder hidrolik: 50 mm, tinggi pemasangan: 2.100 mm, lebar total: 1.120 mm, panjang total: 1.200 mm, panjang meja: 465 mm, lebar meja: 465 mm, gaya penekanan: 25 t, panjang langkah: 75 mm, penyesuaian langkah: 50 mm, berat keseluruhan: 1.600 kg, sambungan udara terkompresi: 6 batang, jenis penyesuaian ketinggian: mekanis, frekuensi input: 50 Hz, gaya punching: 25 t, PRESSIX Pressix 25 CNR 4 ini diproduksi pada tahun 2012 dan dirancang untuk stamping presisi tinggi, blanking, serta pemrosesan strip kontinu. Mesin dilengkapi dengan decoiler manual, servo roller feeder G+K WVS/L 150, dan recoiler bermotor, menjadikannya ideal untuk produksi coil-fed yang efisien. Ncjdjy Tlckopfx Aa Uet Gaya = 25 kN Kecepatan nominal = 200 spm Panjang langkah = 5-75 mm Penyesuaian slide = 50 mm Tinggi shut press = 270 mm Dimensi meja = 360x465 mm Lubang bolster = 110 mm Area slide = 160x220 mm Lubang slide = 30 mm Kedalaman tenggorokan = 185 mm Daya = 1,5 kW Berat = 1600 kg Dimensi PxLxT = 1150x1200x2100 mm

Kondisi: bekas, nomor mesin/kendaraan: XLWRT222079306537, pendaftaran pertama: 05/2007, jenis bahan bakar: diesel, bahan bakar: diesel, warna: lain, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2007, jam operasional: 21.826 h, Poros 1: kiri 18 mm, kanan 18 mm Poros 2: kiri 6-6 mm, kanan 6-6 mm Poros 3: kiri mm, kanan mm Njdpfx Aey T H Arja Usct

Kondisi: baru, de-en-001 Ncsdpfxoiiv Dco Aa Uot

Kondisi: bekas, de-to-en Nsdpfx Asy Tzcasa Uect

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MAIN SPINDLE - Spindle nose: ASA 11'' A2 - Spindle drive power: 39 / 48 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 95 [mm] - Max. machinable diameter: 550 [mm] - Max. diameter over bed: 920 [mm] - Max. turning diameter over cross slide: 745 [mm] - Minimum resolution C-axis: 0.001 [degrees] TURRET - Number of positions: 12 - Number of driven positions: 12 - Driven tool speed: 4000 [rpm] - Driven tool power: 16 [kW] - Travel X/Z: 315 / 1350 [mm] - Travel Y: [mm] - Rapid traverse speed (X/Y/Z): 30 / 15 / 30 [m/min] TAILSTOCK - Tailstock travel: 1350 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 65 [kVA] WEIGHT AND DIMENSIONS - Required space: 4088 x 2020 [mm] - Machine height: 2240 [mm] - Machine weight: 9000 [kg] OPERATING HOURS - Power-on hours: 35873 [h] EQUIPMENT - Control: Fanuc 32i Model B - 3-color status light - Coolant tank Njdpfx Aaey Tzb As Usct * with high-pressure pump - Chip conveyor - Spindle cooling - Tool setting probe: Renishaw

Kondisi: bekas, 1 Ncsdpfx Aasy Tzbvo Ust

Kondisi: bekas, TECHNICAL DATA - Number of Axes: 3 MAIN SPINDLE - Spindle nose: A2-8 - Spindle drive power: 27 [kW] Nsdpfxjy Tzbpj Aa Uoct - Spindle speed: 3500 [rpm] - Max. turning diameter over bed: 920 [mm] - Max. turning diameter over cross slide: 745 [mm] - Max. machinable diameter: 550 [mm] - Minimum C-axis indexing: 0.001 [degree] TURRET - Number of positions: 12 - Number of driven positions: 12 - Driven tool speed: 4000 [rpm] - Driven tool power: 16 [kW] - Travel X/Z: 315 / 1350 [mm] TAILSTOCK - Distance between spindle and tailstock center: 1424 [mm] ELECTRICAL SUPPLY - Supply voltage: 4000 [V] - Total connected load: 45 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 4088 x 2020 [mm] - Machine height: 2236 [mm] - Machine weight: 8100 [kg] MACHINE HOURS - Power-on hours: 34,000 [h] ACCESSORIES - Control: Fanuc Series 32i Model A - 3-color status light - Coolant tank - Chip conveyor - Spindle cooling

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Kaiser Stanzautomat Tipe: KSTU 4000-25-6P Daya tekan: 4.000 kN Nsdsy Tp U Depfx Aa Uoct Ukuran meja: 2.500 x 1.250 mm Ukuran ram: 2.500 x 1.100 mm Tinggi pemasangan: 700 mm Langkah ram: 40-250 mm Penyesuaian ram: 200 mm Kecepatan stroke: 20-100 1/menit Kontrol: Siemens S7 Kebutuhan ruang: 4,8 x 3,2 x 4,8 m (P x L x T) Berat: 78.000 kg PBK Mesin pelurus Lebar strip: 120 - 800 mm Ketebalan strip hingga 6,0 mm ARKU decoiler Kapasitas muat: 8.000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, helmerding-kdh-400-daten Ncodpfey Tp Uqjx Aa Uot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Produsen: Helmerding Presse Gaya tekan: 5.000 kN Penyesuaian langkah: 97-400 mm Jumlah langkah: 10-80 1/menit Tinggi pemasangan alat: 800 mm Penyesuaian ram: 200 mm Nsdpfx Aaey Tp Ukj Uect Luas ram: 3.000 x 1.400 mm Luas meja: 3.000 x 1.400 mm Daya motor: 90 kW Berat mesin press: 120.000 kg Termasuk sistem transfer dan unit pengumpan pita

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Produsen: Müller Weingarten Press Tipe: HUQ 630.40 Kekuatan tekan: 6.300 kN Ukuran meja: 4.000 x 1.600 mm Ukuran ram: 4.000 x 1.600 mm Langkah ram: 124-400 mm Penyesuaian ram: 200 mm Jumlah langkah per menit: 10-60 1/menit Sistem pergantian alat: Troli pergantian alat Termasuk transfer dan sistem pita ARKU Ncjdpfxey Tp Uds Aa Ujt

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2019, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 222971-1906-0457, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, berat keseluruhan: 90 kg, tekanan: 6 batang, tegangan masuk: 230 V, The Geiger (device with intermittent faults) MiniServo II 1.5 is a servo-driven extraction device or sprue picker specifically designed for use with injection moulding machines. The unit is used to precisely and quickly remove and deposit sprues or small finished parts from the mould. Swivel axis (A): 0–105° Ejector stroke (X): 300 mm with linear guide and rack Vertical / traverse stroke (Y/Z): 800 mm linear guide and rack (part and gripper weight up to max. 1.5 kg) Servo-driven main axes Electromechanical drop protection (Y) Sliding console Gripper F Ncsdpey Tn Rdjfx Aa Uot Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Programming assistant for the programming of standard extraction cycles with 1 air and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Deposition area behind and in front of the machine RAL 9016 white Additional control HT7, vacuum circuit and consoles Sale only to commercial customers, warranty excluded.

Tahun pembuatan: 2021, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 866707054, Here you are bidding on a Hobart rack conveyor dishwasher, Type CN Series. The machine was first installed in a company canteen in June 2021, where it was used for lunchtime operations. Due to closure of the business, operations ceased in December 2024. The washing system was purchased new by the operator, carefully maintained, and all required service work commissioned accordingly. HOBART presents the new generation of the proven CN-series as a powerful PROFI version – the new rack conveyor dishwasher stands for greater efficiency and economy, ensuring even more sustainable commercial warewashing. Professional, high-performance, and reliable, it meets the daily challenges in commercial kitchens. The CN rack conveyor series is modular in design and operates from left to right, starting with pre-wash, main wash, rinse, drying and output via a roller conveyor. Disassembly was carried out by the Hobart factory service team. Commissioning will also be handled by the factory service at an additional cost, ensuring warranty coverage. Njdpjy N R Nhjfx Aa Uect You will receive an invoice with VAT shown separately. Equipment details: - Climate heat recovery: smart use of exhaust air - Climate-Pro heat pump: save up to 20 kWh - LC detergent saving system - Triple rinse - Wide-angle spray washing system - Dynamic-Dry drying - Automatic water consumption - Empty compartment detection - Automatic soil removal: ASR system - Drop-in wash system - Color-coded cleaning aid - Deep-drawn waste outlet - Fully deep-drawn wash tank - Easy-to-clean condenser - Separation of wash items and detergent solution - TRI-RINSE: Premium rinse results thanks to three-stage zone - PERMANENT-CLEAN soil removal: Innovative filter system eliminates manual pre-rinsing - LC detergent saving system: Reduces detergent use by up to 50% - Automatic water consumption adjustment: Machine consumption adapts to load - CLIMATE heat recovery: efficient use of exhaust air - CLIMATE-PRO heat pump: innovation meets economy and energy efficiency - RACK-FLOW sensor system: easy single-person operation - Fully deep-drawn tank: no chance for dirt residue - Easy-clean condenser - Deep-drawn waste outlet - DYNAMIC-DRY drying: Optimal results thanks to new blower technology with higher dynamic airflow. Increases efficiency by up to 50% Technical data: External machine dimensions W: 4215 x D: 2336 x H: 2150 mm (see photos/sketch) Clearance width: 510 mm Clearance height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year built: 2021 6-month warranty on electrical parts, covering replacement of defective parts only, without labor or installation costs Your key advantages: - Full operating day without water change, yet absolutely hygienic cleaning results – even with heavy soil - Consistently clean pre-wash guaranteed - Constant high wash solution quality ensured - Energy losses through exhaust air minimized - Applied energy is used efficiently - Operating costs significantly reduced - Innovation combined with economy and energy efficiency Subject to changes and errors.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of bar material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 Nsdoy N A S Uspfx Aa Uoct - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Travel X1 (mm): 35 - Travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Travel X2 (mm): 35 - Travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (quantity): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Subspindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (quantity): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Rear Tool Device, Dragged / Stationary - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (quantity): 3 Rear Tool Device (X4 Axis) - X4 stroke (mm): 39 - Rapid traverse (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (quantity): 4 Driven Tool Unit for Rear Device (with X4 Axis) - Max. speed (rpm): 10,000 - Driven tool stations (quantity): 4 - Clamping diameter for drilling tools - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant System - Pump pressure, single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High-pressure coolant system - Fire extinguishing system Subject to technical changes and errors.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of round material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - with fixed guide bushing (mm): 130 - with rotating guide bushing (mm): 80 - with programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - X1-axis travel (mm): 35 - Y1-axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - X2-axis travel (mm): 35 - Z2-axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (qty): 2xG - Clamping diameter for boring tools (mm): 0.5–7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (qty): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment, Synchronized / Fixed - Z-axis stroke, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (qty): 3 Ncedpfey N A Atex Aa Ust Backworking Attachment (X4-Axis) - X4-axis stroke (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (qty): 4 Driven Tool for Backworking Attachment (with X4-Axis) - Max. speed (rpm): 10,000 - Max. driven tools (qty): 4 - Clamping diameter for boring tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire extinguishing system Subject to changes and errors in technical specifications and details.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE Ncjdsw Efgajpfx Aa Ujt - Spindle nose: A2-5" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar capacity: 51 mm - Max. machining diameter: 195 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5" - Spindle drive power: 7.5 kW - Spindle speed: 6000 rpm - Max. bar capacity: 42 mm - Minimum C-axis resolution: 0.001° TRAVELS - Z-axis travel: 400 mm - X-axis travel: 150 mm - Rapid traverse speed: 36 m/min - Distance spindle/sub spindle: 600 mm TURRET HEAD 1 - Number of stations: 24 - Number of driven stations: 12 - X/Z axis travel: 400/150 mm - Y axis travel: +/-40 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.1 kW TURRET HEAD 2 - Number of stations: 9 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 3072x1974 mm - Machine height: 1799 mm - Machine weight: 6500 kg EQUIPMENT - Control: Fanuc 0i-TF PLUS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-colour status lamp - Coolant tank * Internal coolant supply (ICS) - Chip conveyor: DROITE LNS MH500 - Tool measurement probe - Parts removal - Parts conveyor belt - Bar feeder interface - Electrical transformer