Beli Pabrik Akhir Shell 12 Buah bekas (26.808)

Kondisi: bekas, Tahun pembuatan: 2024, kapasitas angkut: 25.000 kg, tinggi angkat: 3.100 mm, panjang total: 8.880 mm, · Load center distance: 1200 mm · Load distance, center of drive axle to fork: 1070 mm · Wheelbase: 4250 mm · Axle load, front with load: 15,500 kg · Axle load, rear with load: 53,800 kg · Axle load, front without load: 17,400 kg · Axle load, rear without load: 4,100 kg · Track width, front / rear: 2200 / 2140 mm Lsdpfxezdldme Aptern · Tire pressure: 1.0 MPa · Mast tilt, α = forward / β = backward: 5/10° · Seat height: 2150 mm · Height with tilted EGO cabin / OHG: 3800 mm · Width with tilted EGO cabin / OHG: 3700 mm · Width over fork arms, min. / max.: 2700 / 800 mm · Side shift ± at width over forks: 557 / 1585 mm · Minimum working aisle width for 90° stacking: 9550 mm · Turning radius: 5875 mm · Inner turning circle: 550 mm · Hydraulic operating pressure: 22.0 MPa · Hydraulic oil tank volume: 330 l · Fuel tank capacity: 375 l · AdBlue tank capacity: 35 l · Engine fuel type: Diesel, 4-stroke · Power ISO 3046 / at speed: 185 / 220 kW / rpm · Torque ISO 3046 / at speed: 1160 / 1200 Nm / rpm · No. of cylinders / displacement: 6 / 7700 cm³ · Fuel consumption, normal operation: 8-11 l/h · AdBlue consumption, normal operation: 3-5 % of diesel · Transmission manufacturer/type designation: Dana TE17000 · Clutch type: Torque converter · Transmission type: Hydrodynamic powershift transmission · Number of gears, forward / reverse: 3 / 3 · Alternator type / output: AC / 3080 W · Starter battery, voltage / capacity: 2x12 / 145 V/Ah · Drive axle, manufacturer/type: Kessler D91 / Differential and planetary hub reduction · Lifting speed without load (m/s): 0.3 · Lifting speed at rated load (m/s): 0.32 · Lowering speed without load (m/s): 0.38 · Lowering speed at rated load (m/s): 0.38 · Travel speed, F/R without load (km/h): 24 / 24 · Travel speed at rated load (km/h): 23 / 23 · Max. gradeability without load (%): 60 · Gradeability with rated load (%): 29 · Gradeability at 2 km/h without load (%): 41 · Gradeability at 2 km/h with rated load (%): 22 · Maximum drawbar pull (kN): 173 · Interior noise level, LpAZ*, EGO cabin (dB(A)): 72 · Exterior noise level, LWA (dB(A)): 109

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Lrjdpfx Aot Hwt Sjptjn Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: bekas, Tahun pembuatan: 1985, Thread diameter 254 mm Ljdpfot Hw U Ajx Aptern Grinding length 350 mm Thread pitch 51 mm Control system SIEMENS S 8 Total power requirement 12 kW Machine weight approx. 5,000 kg Space requirement approx. ... m Internal thread grinding machine with PLC control

Kondisi: bekas, Tahun pembuatan: 1978, Spindle diameter: 105 mm X-travel: 1,250 mm Y-travel: 1,000 mm Z-travel: 600 mm Table length: 1,100 mm Lsdpfx Ast Hwtxsptjrn Table width: 900 mm Spindle taper: ISO 50 / Morse taper Total power requirement: kW Machine weight approx.: t CNC table-type boring mill Year of manufacture: 1978 Overhauled: 2002 BOSCH control: CC 300

Tahun pembuatan: 1980, Kondisi: bekas, Table length 2,000 mm Table width 1,800 mm Table load capacity 12.5 t Total power requirement 10 kW Machine weight approx. 7.5 t Space requirement approx. [to be completed] m Table size approx. 2,000 x 1,800 mm Maximum table load approx. 12,500 kg Table travel (longitudinal) 1,250 mm Table height above floor 920 mm Longitudinal feed rate 0.63 - 2,000 mm/min Rotary feed rate (based on 1,000 mm Ø) 1 - 3,150 mm/min Rapid traverse (longitudinal) 2,000 mm/min Rapid traverse (rotary, based on 1,000 mm Ø) 3,150 mm/min Lrsdpfot Hwq Rox Aptjn Machine weight 7,500 kg External dimensions (LxWxH) 3,700 x 2,100 x 920 mm Drive output total 10 kW - 380 V - 50 Hz Accessories / Special equipment - Steel telescopic covers for the guideways - Infinitely variable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and reading device Condition: satisfactory to good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We kindly ask you to review our offer. Please always enquire about your requirements for good used machines with us.

Kondisi: bekas, Tahun pembuatan: 1984, Honing diameter 12 mm Stroke 40 mm Throat depth mm Total power requirement 15 kW Machine weight approx. 5 t Space requirement approx. m G E H R I N G 3-spindle vertical portal honing machine Type M 3-40-12 Year of manufacture 1986 _____ Honing diameter normal/maximum: 2.5 - 12 / 40 mm Max. honing depth approx.: 4-40 mm Max. spindle stroke: 40 mm Installation height table to spindle lower/upper: 300 mm Table size / Ø: 750 mm Table height above floor: 1,100 mm Spindle speeds steplessly adjustable: 800 - 4,000 RPM Stroke speed steplessly adjustable: 380 DH/min Spindle drive: 3 x 1 kW Total drive: 15 kW - 380 V - 50 Hz Weight: 5,000 kg Accessories / Special Equipment · Machine is equipped for precision honing of an automotive valve body approx. Ø12 x 40 mm high, Lsdpfx Apst Hwvtstorn with a blind hole of approx. Ø8 mm x 20 mm, consisting of: · BOSCH PLC control for programmable operation and "Cylindromatic S" control. · 8-station indexing rotary table, type DH 750-45, approx. Ø750 mm · Parts feed via chute, with a deburring station, pre-measurement station, and part turning station located outside the table area · Pre-honing with subsequent measuring station · Intermediate honing with subsequent measuring station · Finish honing with subsequent measuring station · Workpiece unloading and sorting for good and reject parts · MAZ-8-42 mechanical automatic adjustment heads for honing stone expansion · The 3 measuring stations operate using an air gauge plug, which enters the bore and transmits any correction values to the fine adjustment of the spindle. · Complete coolant oil system with belt filter, separate control cabinet, separate hydraulics, etc.

Kondisi: bekas, Infeed: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Ljdpfx Ajzdd Nisptorn Stator blades: 2 Rotor blades: 4

Kondisi: bekas, Overhauled heavy-duty granulator, wear-protected Suitable for both dry and wet size reduction Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste Rotor: 800 mm diameter x 1600 mm width Lrjdpfx Apjzdd Hhotjn Open F7 rotor with replaceable knife mounts Drive power: 160-250 kW With forced feeding via 3 load-dependent, controlled feed screws Hydraulically tiltable, hydraulically swivelling screen basket Throughput capacity up to 5 t/h depending on material and particle size

Kondisi: bekas, Mesin penghancur / Mesin penghancur Merek: HERBOLD Tipe: SMS 45/60-H5-3 Mesin dasar dengan rangka bawah, motor, penggerak sabuk-V, tanpa sistem pengumpanan/keluaran dan tanpa panel kontrol Pisau rotor: 5 Pisau stator: 3 Lredpezdd Apjfx Apton Diameter rotor: 450 mm Lebar rotor: 600 mm Bukaan pengisian: 600 x 580 mm Daya penggerak: 75 kW

Kondisi: bekas, Cutting mill Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor: 300 mm diameter x 600 mm width Lrjdpfx Apezdd Aietjn 3 rotor knives, open rotor design Housing with 4 stator knives Equipped with 11 kW drive motor (optionally up to 30 kW)

Kondisi: bekas, Heavy-duty cutting mill Manufacturer: NETZSCH CONDUX Model: CS 500/600-4 Feed opening: approx. 600 x 600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor: 75 kW Lrsdpszdd Acofx Apton

Kondisi: bekas, Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 Stator knives: 2 Drive: 7.5 kW Lrodszddz Eopfx Aptjn Double angled cut With roller feed, electrical control cabinet, and soundproof enclosure

Kondisi: bekas, Overhauled heavy-duty granulator, wear-protected Lrjdszddzxepfx Apton Suitable for both dry and wet size reduction Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with replaceable knife mounts Drive power: 160-250 kW With forced feeding via 3 load-dependent, controlled feed screws Hydraulically tiltable, hydraulically swivelling screen basket Throughput capacity up to 5 t/h depending on material and particle size

Kondisi: bekas, daya: 160 kW (217,54 hp), Mesin Pemotong GETECHA RS 8012 Lrjdpfozddzfex Apton Aksesori: dengan lemari kontrol bekas Penggerak: 160,0 kW Pisau rotor: 7x2 Pisau stator: 4 Diameter rotor: 800 mm Lebar rotor: 1200 mm Bukaan masuk: 1200 x 950 mm

Kondisi: bekas, Cutting mill Manufacturer: HERBOLD MECKESHEIM Lrsdezddyujpfx Aptjn Model: SMS 80/160 Rotor: 800 x 1600 mm wide Drive motor: 250 kW

Kondisi: bekas, Merek CONDUX Tipe CS 450/600-2 Mesin penghancur bodi berongga dan mesin pemotong ulang untuk material yang sudah diperkecil sebelumnya Rotor diameter 450 mm x lebar kerja 600 mm 5 pisau rotor (potongan miring), 2 pisau stator Motor penggerak 22 kW Lrodpfx Aszddx Repten

Kondisi: bekas, HERBOLD granulator, model SMS 60/100 Heavy-duty design Infeed opening: 700 x 1000 mm Open rotor: 600 mm diameter x 980 mm width (available as open 3- or 7-knife rotor) Lrsdpfx Apezddx Dsten Drive motor: 110 kW Hydraulic opening mechanism with electric winch

Kondisi: bekas, daya: 160 kW (217,54 hp), Hidrolik baru, pisau baru, bantalan baru Penggerak: 160,0 kW Pisau rotor: 5x2 Pisau stator: 2x2 Diameter rotor: 700 mm Lebar rotor: 1200 mm Bukaan pemasukan: 800 x 1200 mm Ljdpfx Aozddw Hoptorn

Kondisi: bekas, daya: 160 kW (217,54 hp), Mesin Pemotong DREHER 26/90 / Mesin Pemotong Mesin ini dilengkapi dengan pisau yang diasah dan cocok digunakan sebagai mesin penggiling untuk sisa punch dan gulungan film. Data mesin: Penggerak: 7,5 kW Pisau rotor: 5x3 Ljdezddwaopfx Aptorn Pisau stator: 2x2 Diameter rotor: 260 mm Lebar rotor: 900 mm Dengan penarik rol

Kondisi: bekas, Mesin Penghancur / Mesin Penghancur Merk HERBOLD Tipe SMS 45/100-H5-3 Rotor pisau semi-terbuka 5x2, 2 baris pisau stator. Mesin dilengkapi dengan pisau alas ketiga (deflektor) yang dapat diganti untuk menangani material berdinding tebal. Corong masuk untuk pengumpanan dengan conveyor belt. Rotor terpasang di luar rumah. Rumah terbagi di tengah, dapat dibuka dengan winch manual. Desain potong miring ganda: pisau rotor dan stator diatur saling berhadapan dan memotong seperti gunting. Dengan rangka dasar termasuk peredam getaran. Data mesin Pisau rotor: 5 x 2 Baris pisau stator: 2 Lredpfx Aozddv Njpten Daya penggerak: 75 kW

Kondisi: bekas, The Herbold fine mill PU 500 is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power: 55 kW Grinding disc diameter: 500 mm Lredpfx Aezddvvspton Throughput capacity: approx. 200-800 kg/h depending on material and fineness.

Kondisi: bekas, CONDUX CS 500/1000 cutting mill / cutting mills Lodpfxezddlwj Aptsrn Multi-knife mill with 16-knife rotor 6 stator knives Drive motor: 90 kW With accessories

Kondisi: bekas, daya: 160 kW (217,54 hp), Mesin Pemotong GETECHA RS 8012 Aksesori: dengan lemari kontrol bekas Penggerak: 160,0 kW Pisau rotor: 7x2 Pisau stator: 4 Lrjdpfxjzddf Do Apton Diameter rotor: 800 mm Lebar rotor: 1200 mm Bukaan masuk: 1200 x 950 mm

Kondisi: bekas, Overhauled heavy-duty granulator, wear-protected Suitable for both dry and wet size reduction Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with replaceable knife mounts Drive power: 160-250 kW With forced feeding via 3 load-dependent, controlled feed screws Ledpezddd Tefx Aptsrn Hydraulically tiltable, hydraulically swivelling screen basket Throughput capacity up to 5 t/h depending on material and particle size

Kondisi: bekas, Mesin penghancur / Mesin penghancur Merek: HERBOLD Tipe: SMS 45/60-H5-3 Mesin dasar dengan rangka bawah, motor, penggerak sabuk-V, tanpa sistem pengumpanan/keluaran dan tanpa panel kontrol Pisau rotor: 5 Pisau stator: 3 Diameter rotor: 450 mm Lrjdpfxezdddme Apton Lebar rotor: 600 mm Bukaan pengisian: 600 x 580 mm Daya penggerak: 75 kW