Beli Regulator Termovit bekas (3.029)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 444.796 km, daya: 346 kW (470,43 hp), pendaftaran pertama: 08/2022, jenis bahan bakar: diesel, berat keseluruhan: 8.088 kg, konfigurasi gandar: 4x2, jarak roda: 390 mm, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2022, jumlah silinder: 6, kapasitas silinder: 12.419 cm³, posisi setir: kiri, Perlengkapan: kemudi berkuasa, riwayat servis lengkap,

Kondisi: baru, Band saw with gravitational descent MACC SPECIAL 411 CSO New CE compliant The machine’s fundamental features (blade support rigidity, flywheel sizing, blade guides, and blade tensioning) have been thoroughly engineered to prevent blade fatigue, extend blade life, improve cutting straightness, and reduce cutting time. – Bandsaw with gravity-fed arc descent controlled by a hydraulic circuit, manual bar feed and vise clamping, manual head return – Vertical rotation on an adjustable conical bearing pivot, zero backlash – Blade drive with two-speed motor and special gearbox featuring a bronze gear and hardened, ground worm screw – Properly dimensioned flywheels – Robust blade guides with sealed guide bearings and adjustable carbide inserts – Blade tension achieved via electromechanical device with microswitch blade rotation control – Vise with rapid approach device – Safety devices on flywheel housing, control knob, and blade – Hydraulic cylinder for controlled descent – Cutting thickness: 1.2 mm – Cutting range: 45° left / 60° right – Adjustable stop for repeat cutting to the same length – 24V low voltage electrical system – 0.06 kW electric pump for blade cooling Hfedpoficb Tofx Ahnjh – Pedestal with chip collection drawer and removable coolant tank – Machine prepared for handling with pallet truck

Kondisi: diremajakan ulang (bekas), Conventional parallel lathe MORANDO Model SR26 1300 X 7000 mm Machine fully reconditioned according to CE standards. New Turcite; new electrical and hydraulic systems. Bed regrinding performed. Safety features compliant with accident prevention regulations, including protective guards. Heavy-duty series with single-piece cast iron bed. Ways as good as new. Four-jaw chuck diameter: 1700 mm. Hfsdpowbfw Dsfx Ahnjh No. 2 steady rests. Maximum workpiece weight between centers, without steady rests: 25,000 – 30,000 kg. Maximum workpiece weight between centers, with steady rests and tailstock: 38,000 kg. Center height: 1300 mm. Swing over bed: 2615 mm. Swing over carriage: 2240 mm. Bed width: 1500 mm. Distance between centers: 7000 mm. Chuck diameter: 1700 mm. Spindle motor: 50 – 80 Hp. Number of speed ranges: 24. Spindle speed range: 1 – 200 Rpm. Dimensions: Length: 11,800 mm Height: 3,000 mm Approx. weight: 35,000 kg Machine can be inspected under power.

Kondisi: baru, Ready for immediate delivery, subject to prior sale. Hydraulic combined shear with 5 workstations, punching station with mechanical back gauge and adjustable ram stroke, notching, shearing for flat bars, bars, and profiles with adjustable back gauge and automatic cutting control, foot pedal, centralized lubrication system, work light. Machine supplied with safety guards according to CE regulations, CE declaration of conformity, user manual. Applied force: 45 Ton Motor power: 4 kW Hedpfegygfvjx Ahnsfh Dimensions: 1,450 x 900 x 1,450 mm (L x W x H) Weight: 1,215 kg PUNCHING: Punching capacity: Ø 22 mm x 15 mm thickness Throat depth: 175 mm Punch stroke: 50 mm Working height: 935 mm SHEARING: Flat bars: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Round bars: Ø 30 mm Square bars: 45 mm Angle profiles at 90°: 100 x 100 x 10 mm Angle profiles at 45°: 70 x 70 x 6 mm NOTCHING: Max thickness: 8 mm Width: 35 mm Depth: 75 mm Working height: 935 mm

Kondisi: baru, Tahun pembuatan: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with fast motor, equipped with a pressure gauge and double-speed hydraulic unit, featuring a vane pump for rapid approach and retraction and an axial piston pump for the working phase. Fitted with a pressure adjustment valve and a three-position control distributor (advance – neutral – return). The machine is supplied with oil. Equipped with a winch for raising the work table. The ram is made of special treated and chromed steel. The machine is equipped with two-hand control and simultaneous operation in accordance with current regulations. Complete with protective panels at the rear and sides. CE certified with full electromagnetic compatibility. Piston stroke: 310 mm Hfsdpfxjfh R Nyj Ahnjh Clearance: 1,010 mm

Kondisi: baru, en_001 Hfsdpfxjhzg Ihj Ahnjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Calendering machine with 4 rolls OMEC. Ready for delivery, subject to prior sale. Model FX4.90.1330. Double pre-bending. Working width: 1330 mm. Upper and lower roll diameter: 90 mm. Side roll diameter: 95 mm. Bending thickness: 2 – 2.5 – 3 mm. (1.5 x D – 3 x D – 5 x D) Upper and lower rolls motorized with equal power. Motorized ascent/descent for side rolls. Hodpfxjfh Skpe Ahnsfh Frontal opening of the upper roll. Roll surface induction hardened HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for roll inclination adjustment. Sheet clamping with bearing device. 2-pedal foot control. Electric panel compliant with "CE" standards. mm scale indicator for sheet clamping gauge. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with full double pre-bend and front opening release. The upper roll is fixed while the lifting and lowering movement is applied to the side and lower rolls. Sheet clamping is very simple because once the sheet is inserted between the upper and lower rolls, the lower roll ascends and locks the sheet in place. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Standard equipment supplied with the machine: - Frontal conical bending device on the upper roll. - 2 digital position readouts for side rolls. - Grinding/turning of the rolls after hardening treatment. - Roll induction hardening.

Kondisi: baru, Maximum cutting width: 250 mm Maximum cutting height: 80 mm Saw blade diameter: 400 mm Motor power: 3.0 kW Speed: 2800 rpm Compressed air connection: 6-8 bar Working height: 900 ±20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 High-speed semi-automatic cross-cut saw ---- Maximum cutting area: 220x80 / 250x50 mm (When sawing stacked boards, note: rear fence height 100 mm) The structure is fully made of robust, thick-walled steel, which is continuously painted and reinforced. A solid floor mounting system is equipped with flanged steel feet to ensure secure installation. The two-hand control is ergonomically positioned for comfortable and efficient operation. Saw motor power: 3.0 kW. Cutting speed is adjustable via a pneumatic regulator for precise tuning. The system is also equipped with a shock-absorbing system to minimize vibrations and improve work safety. Carbide-tipped circular saw blade, diameter 400 mm, Z=96. Hfsdpfx Ahoxmk Ddeneh The upper pressure hood features electro-pneumatic control for precise operation. The pressure hood movement system utilizes innovative ball bearings with double dust protection and automated lubrication for smooth functionality. The electrical system is CE-compliant. CE models must be equipped as standard with at least 1-meter long infeed and outfeed (non-driven roller tables or flat tables) to optimize operation and meet safety standards. Technical Data: ---- Maximum cutting section: 220x80/250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: Carbide-tipped Z=96 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Compressed air: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Worktable height: 900 mm ± 20 mm Color code: RAL 7035 ---- Total price ex works: on request! Options such as: - Infeed/outfeed with non-driven rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop pusher (Combo series) - Movable front guard and more on request! (Technical data as per manufacturer's specifications, subject to change!)

Kondisi: baru, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6–8 bar Working height: 900 +/- 20 mm Dimensions (L x W x H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – The semi-automatic crosscut saw with SALVASTOP 100 – electronic length stop/pusher ----- Pos. 1: Legend 500 Under-table Crosscut Saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards: max. height 100 mm. The structure is made entirely of thick-walled, reinforced, fully painted steel. Robust floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cut control in ergonomic position. Saw motor power: 5.5 kW Adjustable cutting speed via pneumatic regulator. Max system for weight compensation and durability. Shock-absorbing system. Independent pneumatic adjustment options to suit various processing types. Durable and easily replaceable saw blade adjustment rail. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Pressing mechanism features innovative ball bearings with double dust protection and automatic lubrication system. Conforms to CE electrical standards. CE models must be delivered with support plates of at least 1 meter length at infeed and outfeed as standard. Technical data: ----- Max. saw cross-section mm: 220x125, 260x100, 285x80, 310x50 Saw motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2,800 rpm Hfodpfx Ajvu Hd Tohnoh Air consumption per cycle: 7 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Air pressure: 6 – 8 bar Voltage: 400V / 50 Hz / 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 – RAL 1007 Pos. 2: Salvastop 100 Electronic Length Stop ----- - Operation: 2 modes 1 x Stop (length stop travels to specified length) and 1 x Push (several lengths are processed sequentially at the push of a button) - Servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - 7'' touch display - Max. weight of timbers that can be pushed: up to 100 kg - USB connection COMBO_500 – 6400/7000 - Roller conveyor with guide on the right side of the saw. Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm, 3 m. - 6400/7000 SalvaStop 100 on the left side of the saw. Working length 6.4 m. Total length 7.0 m. With tabletop, 7 m. Width 320 mm. The demonstration machine is also equipped with: UP & DOWN FRONT GUARD Movable instead of fixed front guard. The guard lifts while cutting to ensure safe working conditions. Loading and unloading of timber is simplified by the downward-facing guard. The system comes with another special, secured pneumatic system with linear guide, boasting top-quality and state-of-the-art technology. SOFTWARE INTERFACE FILES Preparation for...

Kondisi: diremaj di bengkel (bekas), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 units Weinig Hydro Planing Machine Type Uniplan 23 ----- Machine fully factory-reconditioned by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings, without axial adjustment. Built-in straight jointer on both spindles with automatic stone advance, remote-controlled with guard closed. Machine with continuous, chainless feed equipped with rubber rollers. Electrical height adjustment of the spindles, displayed via mechanical digital indicator (SIKO). Limit switch to restrict height adjustment. Pneumatic feed roller pressure. Stops and table plates non-adjustable. Machine equipped with steel table plates. Machine with full enclosure and integrated noise and dust protection incl. internal lighting. Electrical configuration in accordance with DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC 204-1. Other electrical regulations not considered. Machine delivered with operator tools, but without machining tools. The spindles of the Weinig Uniplan run at a speed of 7,200 revolutions per minute. Before use, please check if your tools are suitable for this spindle speed. Please also observe this when ordering new tools. Technical Data: Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 hp) Horizontal spindles: each 7.5 kW (7.5 hp) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting circle: 163 mm Fixed clamping removal below: 0.5 mm Hjdpfxoxpn Tzo Ahnofh (Technical data according to manufacturer – subject to change!)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, en-001 Hjdpfewzmu Rox Ahnjfh

Kondisi: siap digunakan (bekas), Number of drilling motors: 1 unit Corner hinge drilling: 1=yes, 0=no -> 1 yes Olive drilling: 1=yes, 0=no -> 1 yes 1 HESS Fitting Insertion Station for Corner Hinges and Olives High-performance drilling technology at a low price—this HESS insertion station is ideal for trades professionals. A complete station for drilling both corner hinges and olives, equipped with all essential features: 2 clamping cylinders, drilling depth measurement, efficient suction/extraction, stop systems for hinge and olive drilling, drill head with quick-change chuck, adjustable feed speed, and automatic program sequence. This means technology for perfect results: just one machine, with a single drilling unit and only one drill head for two operations. System Features: - Base frame designed as a setting wall for sashes and frames up to 100 mm - Drilling unit centrally positioned, height-adjustable manually via leadscrew - Borehole position and depth preset for the target fitting type; adjustable via stop system for type changeover - Drilling feed speed variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic program cycle for: fix workpiece – start drilling motor – drill unit moves forward – drill – drill unit retracts – drilling motor stops – release workpiece fixing - Fixed stop systems Standard Equipment / Technical Data: Sturdy base frame as setting wall, precise support made of abrasion-resistant and dimensionally stable plastic, designed for sashes and frames up to 100 mm thick. Drilling for both corner hinges and olives in one machine with a single drilling unit. Simple and convenient vertical operation, easy handling, no templates, minimal time required for secure workpiece positioning, guaranteed accurate and precise holes. 2 clamping cylinders for immovable securing of sash or frame, adjustable for different wood thicknesses. Lateral rebate stop for corner hinges, ergonomically arranged stop system for olive drilling with 14 foldable stops and additional color markings. Fixed stop system for determining borehole height when switching from hinge to olive. Automatic drilling depth sensing for both applications. Drilling unit with quick-change chuck for different tools for hinges and olives; tool change in seconds. Automatic program sequence, clean working thanks to efficient dust extraction, compact footprint and mobile on swivel/castor wheels. Hfodpfxovu Hgzo Ahnjh Electrical equipment compliant with VDE standards. Power connection: 0.55 kW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4–8 bar Extraction connection port: 1 x 100 mm diameter Extraction speed: 25 m/sec. Dimensions required: Width: 2,600 mm Height: 1,250 mm Depth: 800 mm Support height: 300 mm Paintwork: RAL 7030 Stone Grey with RAL 1018 Zinc Yellow 1 Drill Set with 1 x 25 mm and 2 x 10 mm drills, plus 1 additional 34 mm drill (Technical data as provided by manufacturer – subject to change without notice!)

Kondisi: baru, berat keseluruhan: 21.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.550 mm, suspensi: udara, ukuran ban: 235 / 75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat keseluruhan: 21.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.550 mm, suspensi: udara, ukuran ban: 235 / 75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat keseluruhan: 21.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.550 mm, suspensi: udara, ukuran ban: 235 / 75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat kosong: 2.980 kg, berat muatan maksimum: 8.920 kg, berat keseluruhan: 11.900 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 5.110 mm, lebar ruang muat: 2.430 mm, suspensi: baja, ukuran ban: 245/70 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 245/70 R 17,5, ukuran ban belakang: 245/70 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat kosong: 9.150 kg, berat muatan maksimum: 30.850 kg, berat keseluruhan: 40.000 kg, konfigurasi gandar: 3 gardan, panjang ruang muatan: 9.100 mm, suspensi: udara, ukuran ban: 235/75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235/75 R 17,5, ukuran ban belakang: 235/75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat keseluruhan: 30.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 8.200 mm, suspensi: udara, ukuran ban: 235 / 75 R 17,5, warna: lain, tipe perpindahan gigi: lain, ukuran ban depan: 235 / 75 R 17,5, ukuran ban belakang: 235 / 75 R 17,5, kabin pengemudi: lain, kelas emisi: tidak ada, bahan bakar: biodiesel, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: baru, berat kosong: 2.980 kg, berat muatan maksimum: 10.020 kg, berat keseluruhan: 13.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 5.110 mm, lebar ruang muat: 2.430 mm, suspensi: baja, warna: lain, tipe perpindahan gigi: lain, kabin pengemudi: lain, kelas emisi: tidak ada, Perlengkapan: ABS, rem angin bertekanan,

Kondisi: bekas, rexroth-proportional-wegeventil-mit-regler Hfsdpfxoyxg S Dj Ahnoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 23.488 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 20.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.250 mm, UNISIGN UNIPORT 7000 Mesin CNC Milling dan Bor Tipe Portal Hfedpfozcqw Rox Ahneh Dijual sebuah mesin CNC milling dan bor tipe portal berat, UNISIGN UNIPORT 7000, milik grup korporasi Italia yang memindahkan proses produksi spesifik ke luar negeri. Karena alasan kepatuhan dan keamanan, serta perlindungan terhadap komponen kerja, dokumentasi foto lengkap mesin hanya akan diberikan atas permintaan kepada pelanggan akhir terpilih. Mesin ini memiliki area kerja sangat luas, dengan sumbu X sepanjang 20.000 mm, sumbu Y 3.500 mm, dan konstruksi portal masif untuk mengerjakan benda kerja besar dan berat. Data Teknis: Pabrikan: UNISIGN Tipe: UNIPORT 7000 Jenis Mesin: Mesin CNC Milling Portal / Mesin Bor Portal Kontrol: Siemens Sinumerik 840-D Ruang Gerak: Sumbu X: 20.000 mm Sumbu Y: 3.500 mm Sumbu Z: 1.250 mm Meja penjepit: sekitar 22.250 x 3.170 mm Beban maksimum meja: 2.000 kg/m² Lebar portal: 3.000 mm Jarak antara hidung spindle dan meja: 250 – 1.500 mm Spindel: Tipe penahan alat: HSK 100 Daya spindle: 36 kW Kecepatan spindle maksimum: 4.000 rpm Torsi maksimum: 1.350 Nm Transmisi: 2 tingkat Kapasitas pengerjaan pada C45: Boor penuh: Ø 130 mm Tap ulir: M55 Kemampuan milling: sekitar 1.200 cm³/menit Magazin alat: Magazin rantai, 48 slot Panjang alat maksimum: 500 mm Berat alat maksimum: 25 kg Waktu pergantian alat: sekitar 10 detik Feeder / Rapid Traverse: Rapid traverse X/Y/Z: 40.000 mm/menit Rentang pengumpanan: 5 – 40.000 mm/menit Data Mesin: Berat mesin: sekitar 146.000 kg Luas area pemasangan: sekitar 28.500 x 10.800 mm Tinggi total: sekitar 5.000 mm Daya terpasang: sekitar 80 kVA Listrik: 400 V / 50 Hz / 3 phase Deskripsi: Mesin CNC milling portal berat dengan konstruksi portal yang kokoh, cocok untuk pemesinan benda kerja berukuran besar dan berat. Mesin ini dilengkapi kontrol Siemens Sinumerik 840-D, spindle utama bertenaga tinggi, meja penjepit besar, dan magazin alat otomatis. Ideal untuk industri mesin, pengerjaan komponen besar, pembuatan cetakan, konstruksi baja, teknologi energi, atau aplikasi serupa. Spesifikasi teknis sesuai dengan dokumen yang tersedia. Perubahan dan kekeliruan dapat terjadi. Inspeksi dapat dilakukan sesuai perjanjian.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 446.350 km, daya: 346 kW (470,43 hp), pendaftaran pertama: 10/2022, jenis bahan bakar: diesel, berat keseluruhan: 8.088 kg, konfigurasi gandar: 4x2, jarak roda: 390 mm, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2022, jumlah silinder: 6, kapasitas silinder: 12.419 cm³, posisi setir: kiri, Perlengkapan: kemudi berkuasa, riwayat servis lengkap,

Tahun pembuatan: 2021, Kondisi: bekas, MÜLLER MARTINI Book Casing-in Machine EMP 513 Type K317 Year of manufacture: 2021 For casing-in straight book blocks into hard covers, followed by pressing and joint forming. Designed for use as a stand-alone machine. Equipment: - Copilot system with 2x touch-screen monitors - Block feed via register belt and star feeder - Cover pre-stacking belt - Cover magazine - Cover bending unit - Cover forming station - Casing-in gluing unit with profile rollers and adjustable double glue application for the joint area of the book - Glue recirculation system with pump - EMP glue pump monitoring - Book and brochure clamp - Electrically heated joint forming rails, paired and individually controllable via regulator, 15° - Quick-change system for joint forming rails - 2 pressing stations - Heating monitoring - Servo-driven drive system based on Siemens SIMOTION D - Left-hand delivery, book transport lying flat Optional equipment: - Bottom divider with switchable separating roller for processing photo books - Hotmelt nozzle application for joint gluing - NORDSON pre-melter - Code-matching (comparison) from block to cover via Datamatrix code, barcode sensor: Cognex camera - Double cover control - Equipment for processing flexible covers Technical specifications: Mechanical performance: up to 30 cycles/min Book block format range max.: 280 x 375 x 80 mm Book block format range max.: 305 x 375 x 30 mm Book block format range min.: 100 x 100 x 2 mm Open cover format range max.: 660 x 385 mm Open cover format range min.: 210 x 105 mm Open cover thickness max.: 7.0 mm Open cover thickness min.: 0.1 mm Finished book format range max.: 285 x 385 x 90 mm Finished book format range max.: 315 x 385 x 30 mm Finished book format range min.: 105 x 105 x 6 mm Hedpfx Aeyr Hk Sohnefh KOLBUS Conveyor Belt System Year of manufacture: 2021

Kondisi: bekas, berat muatan maksimum: 12.740 kg, berat keseluruhan: 16.000 kg, pendaftaran pertama: 01/2026, panjang ruang muatan: 7.300 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.530 mm, volume ruang muat: 45 m³, lebar total: 2.550 mm, tinggi total: 2.750 mm, Tahun pembuatan: 2026,

Kondisi: bekas, berat muatan maksimum: 13.420 kg, berat keseluruhan: 16.000 kg, pendaftaran pertama: 01/2023, panjang ruang muatan: 7.280 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.525 mm, volume ruang muat: 45 m³, lebar total: 2.550 mm, tinggi total: 2.760 mm, Tahun pembuatan: 2023,