Beli Schüco Schüco Isomat 4 bekas (59.834)

Kondisi: baru, Tahun pembuatan: 2025, Alle Edelstahltrommel-Mischer – schnelle Lieferung eines Geräts Neu nach Bestellung gefertigt Trommel aus Edelstahl, gefertigt aus hochwertigem 316er Edelstahl Drehzahl der Trommel stufenlos regelbar von 0 bis 24 U/min Elektrische Kippentleerung Kapazität 50 kg bis 90 kg, abhängig vom Produkttyp Pgedpfsif Upfsx Aftor 2 Modelle verfügbar

Kondisi: sangat baik (bekas), Dijual pompa industri merek ternama Grundfos. Model SPK 4-8 – pompa vertikal multistage untuk cairan bersih, cairan pendingin, instalasi industri, dan mesin CNC. Spesifikasi teknis: Produsen: Grundfos Model: SPK 4-8 A-A-A Daya: 0,55 kW Putaran: 2850 rpm Kapasitas: sekitar 3 m³/jam Tinggi angkat: hingga 28 m Suhu cairan: maks. 90°C Negara produksi: Denmark Pgedpfxsywpahe Aftor Kondisi: Bekas, berfungsi normal. Terdapat tanda-tanda pemakaian (goresan, sedikit karat – lihat foto). Retak terlihat pada casing dekat port – tidak mempengaruhi operasi (untuk verifikasi pembeli).

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, laju aliran volumetrik: 3.700 m³/jam, daya: 2,1 kW (2,86 hp), frekuensi input: 50 Hz, Systemair KTEX 60-35-4 ATEX Fan 2.1 kW 3700 m³ Can be Installed in Air Ducts KTEX fans feature a compact, streamlined design and a powerful, forward-curved centrifugal impeller, coupled with reliable, ATEX-certified AC motors. Power: 2.1 kW Voltage: 230/400V 50Hz 5.8/3.8A IP44 Power: 2.1 kW Maximum Airflow: 3,704 m³/h Pressure: 580 Pa Impeller Speed: 1,392 rpm Maximum Airflow: 3,704 m³/h Minimum Static Counter Pressure: 225 Pa Temperature of Transported Air: max. 40°C Maximum Temperature of Conveyed Air with Speed Control: 40°C Insulation Class: F Explosion Protection Rating: II 2 G Ex eb h IIB+H₂ T3 Gb Pgodpfx Afsvu Hrkstsr Certificate: Presafe 17ATEX9970X Ambient and Cable Temperature: -20 to 40°C Dimensions and Weights: Inlet (H x W): 350 x 600 mm Outlet (H x W): 350 x 600 mm Weight: 42 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, Mobile air filtration extraction box Box with built-in fan and filter cartridge. Equipped with HEPA filter. For ventilation, filtration, and extraction of room air. Psdpfx Aovvcqxoftogr Extraction capacity: approx. 1800 m³/h Exhaust fan: IMOFA DS 11-4, 460 watts, 50 Hz, 4.8 amps Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges 1 ULTIMA RP HEPA filter, 3000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg

Tahun pembuatan: 2007, Kondisi: bekas, de-20240611-01 Psdpfxjy N Da Ts Aftsgr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Allgemeine Beschreibung Zum Verkauf stehen 6 Stück hydraulische Pressen, Modell YL32-200, stabile Vier-Säulen-Konstruktion, ideal für die Metallumformung, das Pressen, Stanzen, Biegen sowie allgemeine industrielle Anwendungen. Die Maschinen wurden ursprünglich aus China importiert und basieren auf dem international weit verbreiteten Standard der Y32-Serie, was eine einfache Wartung und weltweite Ersatzteilversorgung gewährleistet. ⸻ ⚙️ Technische Spezifikationen (typisch für YL32-200) Pgjdpfsy E Abnsx Aftor * Presskraft: ca. 200 Tonnen * Aufbau: 4-Säulen-Hydraulikpresse * Hub: ca. 400 – 700 mm * Tischgröße: ca. 700 x 700 mm bis 1.000 x 1.000 mm * Tageslicht (Öffnungshöhe): ca. 800 – 1.200 mm * Hydraulikdruck: bis zu 25 MPa * Motorleistung: ca. 7,5 – 15 kW * Steuerung: manuell / halbautomatisch * Stromversorgung: 380V / 50Hz (Standard Industrieanschluss) * Gewicht pro Maschine: ca. 5 – 8 Tonnen ⸻ 🏭 Einsatzgebiete * Metallumformung & Stanzen * Tiefziehen * Richten & Pressen * Kunststoffumformung * Werkstatt- und Industrieproduktion ⸻ 📦 Zustand * Gebrauchtzustand * Verkauf wie besichtigt / ab Standort * Besichtigung möglich nach Terminvereinbarung ⸻ 📊 Verfügbarkeit * Stückzahl: 6 Maschinen verfügbar * Verkauf einzeln oder als Gesamtpaket ⸻ 🚛 Logistik * Standort: Deutschland * Verladung möglich (Gabelstapler/Kran je nach Ausführung erforderlich) * Internationaler Versand auf Anfrage möglich Preis pro Stück !!!! Demontage durch Käufer !!!! Oder gegen Aufpreis organisiert !!!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Kami menawarkan mesin edgebander Format-4 tempora F600 dalam kondisi sangat baik, tahun pembuatan 2023. Pgodjzak D Sjpfx After Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, de-Gasbrenner-2024-06-14 Pgodpfxozaa Uae Aftjr

Kondisi: baik (bekas), Tahun pembuatan: 2020, Tersedia 2 unit! Sistem rak penyimpanan belakang dengan 4 rak berukuran 650x300mm dan 4 lengan penopang untuk bagian panjang Panel belakang berlubang Penerangan area kerja Sistem pengatur ketinggian dengan handwheel (penyetelan halus per 5mm/putaran) Pgsdpjzab Smsfx Aftsr Perlengkapan penjepit pneumatik untuk menjepit profil satuan dalam proses pemasangan fitting, dapat diputar 180°, penguncian pada setiap 30°, penguncian dioperasikan secara pneumatik Posisi penjepit dapat diatur sepanjang profil Rentang penjepitan untuk profil dengan kedalaman konstruksi 45-120mm dan lebar kerja 50-150mm, masing-masing dapat diatur dalam interval 7mm 4 koneksi pneumatik, 5 koneksi listrik, 2 dudukan untuk bor tangan atau obeng, dapat dipindahkan pada penarik alat Ekstraksi alat setengah lebar meja di kanan

Tahun pembuatan: 2003, Kondisi: bekas, de-en_hu_it_lt-001 Pgjdpfx Afjyz T Iqotjr

Kondisi: hampir baru (bekas), Treif broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie graag een aanvraag sturen. Pgjdsumpg Ropfx Aftor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, trans-001 Podpfswgyrtjx Aftogr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 6.314 h, kecepatan spindel (maks.): 24.000 rpm, tinggi total: 3.125 mm, lebar total: 22.000 mm, berat keseluruhan: 26.500 kg, jarak pergerakan sumbu X: 8.500 mm, jarak lintasan sumbu Y: 740 mm, jarak gerak sumbu Z: 1.120 mm, daya motor spindle: 12.000 W, panjang produk (maks.): 7.170 mm, jumlah sumbu: 5, This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and enables 6-sided machining with two 5-axis heads. The unit is equipped with 5 independently driven movable clamping blocks and a saw blade diameter of 450 mm. If you are looking for high-quality profile machining capabilities, you should consider the universal machining center SCHÜCO AS 100, which we offer for sale. Contact us for further details. • Machine bed length: 9,000 mm • Maximum profile length: 7,500 mm • Machining units: 2 x 5-axis heads • Machining sides: Possible 6-sided machining Pedpsy Aawzsfx Aftjgr • Clamping units: 5 movable clamping blocks with independent drives • Saw blade diameter: 450 mm • Cutting angle: 90° (according to cutting diagram) • Control: AS 100 control module (rented via SchüCal) • Software: SchüCal integration Additional equipment • Combined loading and unloading magazine • Barcode scanner (included); optional portable barcode scanner

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: Psdjfdkb Topfx Aftjgr - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards Pjdpfx Aod Tbbdoftogr - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Pjdod Tqaljpfx Aftjgr - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation Pedpfefdkb Uox Aftegr - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Podpfeguk A Hjx Aftegr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard Pedeguk Dkopfx Aftogr - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. Psdofdkbhopfx Aftegr The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Pjdeguk Dvjpfx Aftogr Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Format 4 Kappa 450 x-Motion Kontrol 2-sumbu, ketinggian dan pemiringan Data Teknis: - Panjang potong: 2800 mm - Lebar potong: 1300 mm - Tinggi potong: 155 mm - Diameter maksimum mata gergaji: 450 mm - Kontrol X-motion - Kisi sudut dengan kompensasi panjang Pgsdpfey Rp D Tex Aftjr - Diameter port ekstraksi: Ø 120 mm - Daya motor: 10 kW - Tahun produksi: 2025 Batas mitre duplex

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, daya: 10 kW (13,60 hp), tegangan masuk: 400 V, jarak pergerakan sumbu X: 4.050 mm, jarak lintasan sumbu Y: 2.560 mm, jarak gerak sumbu Z: 280 mm, panjang benda kerja (maks.): 3.120 mm, lebar benda kerja (maks.): 2.160 mm, tinggi benda kerja (maks.): 105 mm, jumlah sumbu: 4, jumlah slot dalam magazin alat: 16, Perlengkapan: Penandaan CE, For sale is a high-spec CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is ideally suited for precise processing of wood, MDF, plastic, and panel materials. The FORMAT-4 H10 impresses with high traverse speeds and a robust construction. Highlights include the powerful 10 kW HSK-F63 spindle, a 360° C-axis, and a total of 16 tool stations. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Machine type: CNC machining center Working Area * X-axis: 3,120 mm * Y-axis: 2,160 mm * Z-axis: 105 mm Travel Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Podoy Smi Aspfx Aftsgr Milling Spindle * 10 kW HSK-F63 spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool stations * HSK-F63 interface * Tool stations in machine rack and side-mounted Additional Units * C-axis 0–360° Vacuum/Table * Matrix/raster table * 2 vacuum pumps, each 250 m³/h * Two fence rows Control/Software * FORMAT-4 H10 control * WoodFlash software * DXF import * 3D graphics display * Parametric programming * Tool database for up to 500 tools * Mobile control panel * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for control computer * Network/Internet ready * Central extraction system * Prepared for drill head * Operating tools and documentation included Condition: Machine in ongoing operation. Well-maintained condition. Viewing possible by appointment.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 280022, Stempel profil Schüco untuk seri fasad FWS50 dan FWS60 dengan dudukan Pgedpfxoy R D Ako Aftsr

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 293784, Drilling spindles: 8 Drilling spindle rotation direction: 4 right-hand and 4 left-hand Drilling spindle speed: 2800 rpm Shank mount: 10 and 11 mm Pgodpfx Afsbnnybetjr Drilling stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space requirement: approx. 650 x 400 x 1700 mm Weight: 120 kg