Beli 2014 Komori La 437 67 M bekas (76.739)

Kondisi: sangat baik (bekas), jarak tempuh: 1.071.000 km, daya: 280 kW (380,69 hp), pendaftaran pertama: 05/2006, jenis bahan bakar: diesel, ukuran ban: 315/80R22,5, konfigurasi gandar: 4x2, jarak roda: 3.700 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, rem: retarder, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 12, kelas emisi: Euro 3, suspensi: baja-udara, beban gandar yang diizinkan (gandar 1): 7.500 kg, beban gandar yang diizinkan (gandar 2): 11.500 kg, Tahun pembuatan: 2006, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci diferensial, pendingin udara, pengaturan jendela elektrik, retarder, spion elektrik,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: Gsdpfx Aioh R Taqoyoit - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) Gsdpod Tbbdofx Aiyeit - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) Gijdpfjfdkb Tox Aiyet - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Giedpfx Aod Tqaleiyst Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard Giedpfx Aefdkb Uoiyot - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Gijdpfx Aieguk A Hsyet

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) Gisdpfefdkbhjx Aiyet - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: Giedpfxsguk Dkj Aiyot - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Gjdpfjmhhy Njx Aiyoit Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth Gsdpjguk Dvofx Aiyjit - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2008, kapasitas pendinginan: 67 kW (91,09 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 690 kg, tegangan masuk: 400 V, lebar total: 1.330 mm, panjang total: 2.330 mm, tinggi total: 1.600 mm, Chiller pendingin udara National Lab 67 kW Kapasitas pendinginan: 67 kW / 19,1 ton (12/7 — 35°C) Tahun pembuatan: 2008 Jenis refrigeran: R410A Sirkuit refrigeran: 1 unit Kompresor: 2 unit Sanyo (scroll) Giodpfoxxtfbex Aiyot Jumlah kipas: 3 unit Dimensi: 2,30+0,25x1,33x1,60 m Berat: 690 kg.

Kondisi: bekas, jarak tempuh: 15.634 km, daya: 229 kW (311,35 hp), tipe perpindahan gigi: mekanis, jenis bahan bakar: diesel, warna: kuning, berat keseluruhan: 23.200 kg, berat kosong: 23.200 kg, berat muatan maksimum: 15.000 kg, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, pendaftaran pertama: 03/2016, rem: pengereman mesin, Tahun pembuatan: 2016, jam operasional: 15.634 h, kabin pengemudi: kabin harian, Perlengkapan: filter jelaga, kabin, kemudi berkuasa, komputer bawaan, kunci diferensial, lampu depan tambahan, pelindung kepala, pendingin udara, penggerak semua roda, rem angin bertekanan, sekop standar, sensor parkir, sistem immobilizer,

Kondisi: bekas, berat muatan maksimum: 11.410 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 03/2017, panjang ruang muatan: 7.441 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.500 mm, volume ruang muat: 46 m³, Tahun pembuatan: 2017, Perlengkapan: ABS, tail lift,

Kondisi: bekas, berat muatan maksimum: 4.960 kg, berat keseluruhan: 10.500 kg, pendaftaran pertama: 04/1993, inspeksi berikutnya (TÜV): 01/2026, panjang ruang muatan: 6.260 mm, lebar ruang muat: 2.430 mm, tinggi ruang muatan: 2.430 mm, volume ruang muat: 37 m³, Perlengkapan: ABS, tail lift,

Kondisi: bekas, jarak tempuh: 184.272 km, daya: 96 kW (130,52 hp), jenis bahan bakar: diesel, berat muatan maksimum: 1.450 kg, pendaftaran pertama: 12/2015, kelas emisi: Euro 5, jumlah tempat duduk: 3, Perlengkapan: ABS, kemudi berkuasa,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: B928, jarak tempuh: 221.756 km, daya: 84 kW (114,21 hp), pendaftaran pertama: 12/2018, jenis bahan bakar: diesel, berat kosong: 2.200 kg, berat muatan maksimum: 800 kg, berat keseluruhan: 3.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.924 mm, inspeksi berikutnya (TÜV): 01/2028, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, jumlah pemilik sebelumnya: 1, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pendingin udara, pintu geser, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 221.756 km, daya: 84 kW (114,21 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, konfigurasi gandar: 4x2, jarak roda: 3.924 mm, berat keseluruhan: 3.000 kg, berat kosong: 2.200 kg, berat muatan maksimum: 800 kg, pendaftaran pertama: 12/2018, inspeksi berikutnya (TÜV): 01/2028, kelas emisi: Euro 6, warna: putih, kabin pengemudi: lain, jumlah tempat duduk: 3, jumlah pemilik sebelumnya: 1, nomor mesin/kendaraan: B928, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: B928, jarak tempuh: 221.756 km, daya: 84 kW (114,21 hp), pendaftaran pertama: 12/2018, jenis bahan bakar: diesel, berat kosong: 2.200 kg, berat muatan maksimum: 800 kg, berat keseluruhan: 3.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.924 mm, inspeksi berikutnya (TÜV): 01/2028, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, jumlah pemilik sebelumnya: 1, Perlengkapan: ABS, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kunci sentral, pendingin udara, pintu geser, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, jarak tempuh: 406.700 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 06/2017, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 8.140 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 580 mm, Tahun pembuatan: 2017, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 406.700 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 06/2017, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 8.140 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 580 mm, Tahun pembuatan: 2017, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kaeser-mobilair-m27pe-2024 Gedjy A E Eqepfx Aiyjit

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, Kaeser Kompressor Mobilair M 82 — Baujahr 2024 Gebraucht aus dem professionellen Mietpark der Kurt König Baumaschinen GmbH, Einbeck. Zustand & Hinweise: - Zustand: Gebraucht aus Vermietung, regelmäßig gewartet - Funktion: Voll funktionsfähig - Produktbilder folgen — bei Interesse kontaktieren Sie uns gerne für aktuelle Fotos - Besichtigung in 37574 Einbeck nach Vereinbarung möglich Preis 29.800 EUR zzgl. MwSt. | EXW Einbeck | Lieferung auf Anfrage Gijdey A E A Aepfx Aiyst

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, kaeser-m125-2025-demo Gsdpfx Aoy A E Aisiyoit

Kondisi: baru, lebar kerja: 105.000 mm,