Beli Bakker Gripper bekas (893)

Kondisi: baru, Tahun pembuatan: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat pouches. Modules for specific pouch features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Pouch detectors verify correct placement and full opening of the doypack pouch. As soon as the pouch is detected, the product is filled into the pouch via the filling spout. The sealing area remains clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. – Specifications: Stainless steel housing (SS304); max. machine cycle rate: 10 cycles/min (no load); pouch width: 250–450mm; pouch length: 250–500mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, single phase; machine dimensions: L1150xW950xH1570mm. Please note that our new prices are often below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We generally have 30–50 different new machines available immediately from stock. For custom-built machines, we offer extremely short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty. Iodov Nllrspfx Ahyjih

Kondisi: baru, Tahun pembuatan: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block-bottom bags or flat pouches, available in duplex version for higher output rates. Modules for specific pouch features such as zip/press closure, screw cap (spout), or gusset forming can be integrated. Optional: batch/date coder, gas flushing module. Bag detectors check for correct positioning and complete opening of the doypack. As soon as the bag is detected, the product is dispensed into the pouch via the filling spout. The sealing area is kept clean throughout the process. A special gripping system holds the stand-up pouch precisely in place during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: Stainless steel housing (SS304); maximum idle machine cycle rate: 25 cycles/minute; pouch width: 100-300mm; pouch length: 100-350mm; compressed air requirement: 6.5bar, 0.4 m³/min; power supply: 220V, single phase, 2kW. Iodpsv Nllxefx Ahysih Please note that our new prices are frequently below typical used equipment prices. Feel free to contact us with your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. For custom-built units, very short lead times from approx. 3 weeks are possible. - All machines are supplied with a full warranty.

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, The machining center has been inspected by a Hurco technician and certified as fully operational without any complaints. Technical Specifications - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control System: - Hurco Ultimax 4, incl. software for milling simulation - Electronic hand-held control unit - Interfaces: RS 232C / V24 - 2 screens for text and graphic processing Iodpfx Ahox Iikbsyeih - 2 software modules for plain text and ISO programming Machine Design: - High rigidity, also suitable for roughing Tool Changer: - Double-arm gripper with 24 stations Equipment: - Cooling unit for milling spindle - Flushing system for chip removal - Enclosure - Coolant system with filtration - Through-spindle coolant supply (IKZ) 20 bar - Chip conveyor Machine Data: - Footprint (excluding service areas): approx. 4,750 mm x 3,120 mm x 2,950 mm (LxWxH) - Weight: approx. 9,000 kg - Connected load: 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating resources visible in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Kondisi: baru, de-Die Pressenblockzuführung ist eine zuverlässige Maschine, die sich zum Entladen von Verbundpalettenklötzen für die Herstellung von Palettenfüßen eignet. Der PBF kann gleichzeitig von zwei Paletten mit Verbundpalettenklötzen auf ein oder zwei Förderbänder entladen. Wie die anderen Portalroboter ist der PBF benutzerfreundlich und verfügt über die gleiche Benutzeroberfläche wie die übrigen Anlagen von Mychrome. Das Zwischenblatt (Grip Sheet) wird automatisch entfernt und in einen Abfallbehälter abgelegt. Maschinenspezifikation: Standardausführung Bedienpersonal: 0 Länge: 5 m Breite: 2,5 m Höhe: 3 m Leistung: 10 kW, 3x400 V+N Pneumatiksystem: 7 bar getrocknete Druckluft, 100 L/min Iodpowduuwofx Ahysih Zu befüllender und zu kontrollierender Behälter: Behälter für Schmieröl Maschinenleistung: 36 Klötze pro Minute (ein Blocktyp) Serienausstattung: - 1 Portalroboter mit Bedienpanel - 1 Vakuumgreifer

Kondisi: bekas, Tahun pembuatan: 2005, Ikhtisar Iijdpfewd Uk Ssx Ahysh Mesin pelabelan lem dingin ini diproduksi pada tahun 2005 oleh perusahaan Jerman HEUFT. Mesin ini sudah tidak digunakan lagi dalam produksi dan sekarang tersedia untuk dijual. Mesin ini dilengkapi dengan dua sistem laser coder terintegrasi untuk penandaan tanggal dan mendukung berbagai jenis format botol. Mesin ini sangat ideal untuk produksi minuman berkecepatan tinggi. Spesifikasi Teknis - Kapasitas: Hingga 60.000 botol per jam - Format: Mendukung 11 format botol - Dari 0,3l - 0,66l - Steini, NRW, Longneck - Jenis wadah: Kaca, tidak transparan, tidak berlekuk - Diameter wadah: 60,4 - 69,1 mm - Tinggi wadah: 174 - 270 mm - Posisi label: - Depan (hingga 2 label) - Belakang (hingga 1 label) - Rentang ukuran label: - Lebar: 70 - 111 mm - Tinggi: 33 - 100 mm - Tinggi pita: 1100 mm - Suhu lingkungan maksimal: 40°C - Sambungan listrik: 400 V - Desain mesin: Model lurus, ukuran L (sekitar 3360 mm lebar) - Diameter karusel botol: 1610 mm - Jumlah piringan botol: 42 - Pemutar botol pada karusel: Mekanis - Diameter bintang pemandu: 690 mm - Unit pelabelan: - 2 x unit pelabelan lem dingin - 8 palet lem - 9 posisi penjepit - Pengisian majalah otomatis Ruang Lingkup Pengiriman - 1 x Mesin Pelabelan | HEUFT | TORNADO | 2005 Termasuk: - 2 x Laser coder terintegrasi | Bluhm - Perlengkapan pelabelan lengkap dengan suku cadang format untuk 11 format botol - Unit lem dingin, palet lem, lengan penjepit, dan majalah otomatis - Dokumentasi teknis

Tahun pembuatan: 1987, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 2008, AG 11 PEINER GRAB Manufacturer: Salzgitter Maschinen und Anlagen AG, Salzgitter Bad / Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition Type: 6231 Model: MMGL2000-4 Protection class: IP44 Voltage: 380V Frequency: 50 Hz Control block: OF-519-0-4-15N Max. pressure: 180 bar Safe Working Load (SWL): 1,600 kg Dead weight: 2,030 kg Capacity: 2.0 m³ Main applications: port operations, waste incineration facilities, steel mills and scrap yards. This gripper model is suitable for loading scrap, ingots, refuse, biomass, wood chips, and similar bulk materials. The PEINER grab’s stated volume refers to the internal volume with closed shells – the actual total payload may be higher. Worldwide service network available. PEINER grabs are designed for crane systems with external power supply. Depending on your crane configuration, the grab can be mounted directly to slewing rings or cross beams. EFFICIENCY – Multi-shell design for handling diverse materials: Example wood chips: maximizes filling volume while minimizing spillage during transport. Thanks to the latest shell design, the PEINER MMGL type is ideal for wood chip handling. The grab offers excellent penetration, optimal filling volume, and clean closing. PERFORMANCE – High turnover rates per work cycle: The motorized orange peel grab features individually powered shells that adapt to the handled material, minimizing losses. Optimized height, low center of gravity, and robust construction enable versatile applications for the PEINER MMG / MMGL series. PEINER MMG / MMGL models have extremely short open/close times, maximizing load cycles per hour. COST-EFFECTIVENESS – Low servicing costs: Maintenance points are easily accessible. For increased uptime and minimized maintenance, PEINER grabs can be fitted with automatic central lubrication. RELIABILITY – An investment in the future: Iodpfx Aehgg Euohyjih PEINER grabs benefit from years of experience in bulk material handling, high-grade components and state-of-the-art production standards. Sales price: €9,500 plus VAT, negotiable, FCA Oradea, Romania Subject to errors, prior sale, or modifications without notice. We speak English / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim româna

Kondisi: sangat baik (bekas), Control unit Power Control + CadMatic 4 Professional software Roller conveyors for lifting table feed (qty) 1 x 18,000 mm + (OPTIONAL: transverse chain sections in 10-ton lifting table, 5,600 mm) Ijdpfx Ahsf Nkv Ssyoih Lifting table (mm) 5,600 x 2,200 VAC insertion trolley for gentle loading of sensitive single panels via vacuum 1st infeed saw with clamping tongs (qty) 6 Rotation device (for panels) 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd infeed saw with clamping tongs (qty) 7 (+1) 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Oscillating chute, chip removal conveyor, with cross-cutting unit (19.5 kW) No. 2 front air cushion tables (+1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables type 68/20 and type 58/24 + No. 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW

Kondisi: bekas, Beam clamp, sheet clamp, plate clamp, beam gripper, sheet gripper, material gripper, profile steel tongs, plate lifter, lifting clamp, lifting gripper -Manufacturer: IP, Safety Lifting Clamp 6 I P -Clamping range: 0 - 40 mm -Lifting capacity: 6 t -Dimensions: 250/110/H550 mm -Weight: 26 kg Iiedpfx Ahsgtn Dfeyoh

Kondisi: bekas, Toolholder, tool post, turning tool, lathe tool holder, tool holder, axial tool holder, driven tool, bar puller, thread cutting head Iiedpfx Asgl Dutshyjh - Manufacturer: Sandvik, 17 turning tools with tool rack - Shank size: Ø 40 mm - Various types: see photos, additional pictures available upon request - Sale: only sold as a complete set - Overall dimensions: 400/660/H500 mm - Weight: 25.6 kg

Kondisi: bekas, Tahun pembuatan: 1993, nomor mesin/kendaraan: 931200665, Packaging system – Wrapping & Shrinking Machines BVM SM4012 K-SC4030S Year 1993 – Serial No. 931200665 Fully automatic packaging machine SM 4012K Infeed width max. 420 mm Shrink tunnel SC4030S Format (width x height): 450 mm x 330 mm 5 m chain gripper feeder Delivery conveyor GUK single sheet feeder Online video inspection via Skype video We would be pleased to welcome you for a visit – more machines in stock Available immediately – inspections possible Iiodpoh Ax Hfofx Ahyoh In stock in Emskirchen / Nuremberg – test run possible

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL SPECIFICATIONS Iiedoixz A Ejpfx Ahyjh Specifications: Cutting width up to 4,400 mm; maximum cutting height (main saw): 72 mm. Main saw motor: 10 HP (7.5 kW); scoring saw motor: 3 HP (2.2 kW). Main saw blade speed: 4,400 RPM; scoring blade speed: 5,100 RPM. Saw Carriage: Working speed: 80 m/min; return speed: 80 m/min. Driven by electronically controlled AC inverter; quick blade release “Power-Lock” system. Automatic cutting length control with optical sensor that detects blade position throughout the cut. Pusher with Clamps: 7 material clamps; forward speed: 0–60 m/min, return speed: 0–60 m/min. Driven by AC inverter; central-mounted servo motor with rack and pinion drive. Friction-free contact measurement system; magnetic measuring system. Machine Control and Operation: PC-based controller with Homag "CAD MATIC" operating system + Windows; user-friendly "REAL TIME" operation menu; 15” full color graphical monitor; optical mouse and standard keyboard for data entry. Integrated “Easy Cut” optimizer for up to 15 parts from 3 different materials; office PC data import capability; compatibility with third-party optimization software. Includes: 4 floating air tables (600 x 1,800 mm), tables individually selectable and powered by a common 5 HP (4 kW) blower motor. HOMAG MODEL HPP250 R 44/44 MAXIMUM CUTTING CAPACITY: 4,400 x 4,400 mm MAXIMUM CUTTING HEIGHT: 72 mm 4 FRONT AIR TABLES 7 PNEUMATIC BOARD HOLDING CLAMPS BOTTOM PNEUMATIC SIDE ALIGNER SILENT DRIVE RACK AND PINION CARRIAGE SYSTEM ELECTRICAL CABINET WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELER

Kondisi: baik (bekas), Cakar penyangga, penjepit plat, cakar plat, penjepit balok, penjepit plat, penjepit material, penjepit material, tang baja profil, penjepit pelat, cakar pengangkat, penjepit pengangkat Isdpfx Aekm Rm Ajhyoih - Produsen: ip, penjepit pengangkat keselamatan tipe IPU10/J dengan cincin angkat yang dapat diputar - Rentang jepitan: 50-100 mm - Kapasitas angkat: 9 t - Jumlah: 1 unit tersedia - Dimensi: 380/110/T460 mm - Berat: 35 kg

Kondisi: baik (bekas), Clamping jaw, sheet metal clamp, sheet metal jaw, beam clamp, sheet metal gripper, material gripper, profile steel tongs, plate gripper, lifting jaw, lifting clamp - Manufacturer: ip, Safety Lifting Clamp Type IPUNZ with swiveling suspension ring - Clamping range: 0-32 mm - Load capacity: 6 t Iedpokm Rnvefx Ahyeih - Quantity: 23 clamps available - Price: per piece - Dimensions: 280/100/H455 mm - Weight: 23 kg/unit.

Kondisi: bekas, Carrier claw, sheet clamp, plate clamp, beam clamp, plate grab, material grab, material gripper, section steel tongs, plate lifter, lifting claw, lifting clamp -Manufacturer: ip, Safety lifting clamp type IPSUNZ 6t with swiveling load ring -Clamping range: 32-64 mm -Lifting capacity: 6 t -Quantity: 4 clamps available -Price: per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/each Iedpfx Aokm Rn Iehysih

Tahun pembuatan: 1998, Kondisi: baik (bekas), R1 Iedpolyvcqofx Ahyeih

Kondisi: bekas, Tahun pembuatan: 2018, Overview The packer was manufactured and commissioned in 2018 by the German company Sema Maschinenbau GmbH. Until now, it has been used in a filling line for fresh milk in glass bottles at a German dairy plant. The line’s capacity was 7,700 bottles per hour. Due to increased demand for milk in glass bottles in recent years, the owner decided to purchase a new system with a higher capacity. Therefore, this machine has become available. The machine is in very good condition, as it is relatively new and has only a low number of operating hours. Technical Data: Performance: 695 crates (with 12 bottles each) per hour Ijdpfx Asl Hx Dmohysih 1333 crates (with 6 bottles each) per hour Formation: 2x3 (1L bottles) 4x6 (0.5L bottles) Gripper heads: for wide-neck bottles (adjustable if needed)

Kondisi: bekas, Sheet clamp, plate clamp, beam clamp, beam claw, sheet lifter, material gripper - Sheet claws - Clamping range: 0 to 50 mm - Load capacity: 4,000 kg - Quantity: 1 clamp available - Price: per piece - Weight: 21 kg/piece Iedpfx Ahsdkbfysysih

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 36,77 kW (49,99 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, warna: merah, berat keseluruhan: 3.520 kg, daya angkat: 1,4 kg/m, tinggi angkat: 2.538 mm, ukuran ban: 20,5-70 R16, kondisi ban: 100 persen, kondisi penggerak: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, kelas emisi: Euro 5, lebar bucket penggalian: 1.500 mm, Tahun pembuatan: 2025, bahan bakar: diesel, kapasitas angkut: 1.400 kg, Perlengkapan: filter jelaga, garpu palet, hidrolik, kabin, kopling trailer, lampu depan tambahan, pemanas parkir, penggerak semua roda, sekop standar, H&R 3514 Loader – The Powerful Wheel Loader for Versatile Applications Advantages of the H&R 3514 Articulated Loader Powerful Engine: The Yunnei DEF20CFF4 engine with 50 hp delivers maximum performance with reduced fuel consumption and complies with Euro 5 emissions standards. Easy Operation: The 2-stage torque converter and all-wheel drive ensure easy handling, even with heavy loads and challenging ground conditions. Compact Design, High Maneuverability: Despite its own weight and a lifting capacity of 1,400 kg, the H&R 3514 wheel loader remains highly maneuverable – ideal for confined construction sites and agricultural applications. Hydraulic Quick Coupler: The hydraulic quick coupler allows you to switch quickly and effortlessly between various attachments such as the standard bucket or the manually adjustable pallet forks. Expandable Functions: Utilize the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale clamps, snow blades, and more. Comfortable All-Day Cab: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with adjustable seat + steering column, diesel auxiliary heater, and rear-view camera. This ensures you can work comfortably and safely, even during extended shifts. H&R loaders are technically and visually optimized and thoroughly inspected at our facility. Additionally, each machine receives extensive corrosion protection treatment. Our loaders are CE-compliant in accordance with the EU Machinery Directive. A TÜV Süd inspection report is available for our machine to obtain a single operation permit in accordance with §21 StVZO (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard bucket (150 cm) and pallet forks • Powerful and robust – versatile in use • Compact design ensures excellent maneuverability • Comfort cab with heating, ventilation, and diesel auxiliary heater • Joystick with electronic gear shift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wiper for clear visibility in any weather • Rear-view camera with display • MP3 radio and USB port for entertainment during work • Ball-type trailer hitch with socket for additional trailer use • 220V coolant pre-heater for reliable cold starting • Hour meter to monitor usage and maintenance intervals • CE-compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration/operating permit: €480 Extended warranty (2 years): €590 Transport within Germany and Austria: Upon request Technical Details Engine: 4-cylinder Yunnei Engine power: 50 hp Emission class: Euro 5 Lifting height: 2,538 mm (bottom edge of standard pallet fork) Iiodpfx Asrkmfxohyoh Dump height: 1,950 mm (standard bucket tipped) Lifting capacity: 1,400 kg Wheelbase: 2,200 mm Tyres: 20.5-70 R16 Dimensions: 3,870 x 1,750 x 2,570 mm Weight: 3,520 kg Accessories and spare parts are available from us. Please provide your phone number with your inquiry!

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Pemotong Profil Scarabeo 55 Mesin pemotong CNC dengan 1 sumbu yang dikendalikan, dirancang untuk memotong profil PVC dengan kecepatan dan kualitas pemotongan tertinggi. Terdiri dari empat komponen berbeda yang terhubung dalam sebuah jalur otomatis: 1. Majalah batang otomatis - badan baja dengan 6 penjepit yang digerakkan oleh sabuk, dan ditenagai oleh motor listrik - kapasitas maks. 8-10 profil (tergantung lebarnya) - dilengkapi dengan perangkat pendeteksi keberadaan batang 2. Unit pemberian profil otomatis 3. Unit pemotong otomatis - mata pisau ø 500 mm - motor listrik 3 kW, 2.800 RPM - memotong pada tiga sudut utama, 45° – 90° – 135° - perangkat pemusat khusus yang memungkinkan pusat rotasi mata pisau diposisikan di tengah bagian profil, sehingga pemotongan berbentuk baji juga dapat dilakukan secara otomatis - dilengkapi dengan sistem pembuangan khusus untuk limbah dan serpihan pemotongan - sepenuhnya tertutup dengan pintu depan untuk akses bebas ke area pemotongan untuk tujuan kalibrasi, pembersihan, dan pemeliharaan - pistol pneumatik untuk meniup serpihan Iisdpfx Ahjrungasyjh 4. Unit pembongkaran otomatis - perangkat pembongkaran otomatis dengan kontrol pneumatik - meja datar untuk menyimpan profil yang dipotong - pelindung pengaman untuk bagian yang bergerak Daya 7,2 kW Berat 1.500 kg - Komputer industri - Layar LCD warna TFT - Keyboard - pengambilan data dari keyboard atau secara ON-LINE - kontrol setiap fungsi pada monitor - Jumlah data yang hampir tidak terbatas untuk profil yang akan dipotong - Printer label dengan pilihan format dan ukuran huruf - pengumpulan data tentang sisa profil yang dipotong (limbah) - kemampuan untuk mengumpulkan data statistik (laporan mingguan dan bulanan) - Diagnosis kesalahan otomatis Ukuran: lebar: 2300 mm, panjang: 12500 mm Direkondisi sepenuhnya, garansi 6 bulan untuk suku cadang. Siap digunakan Dapat dilihat di kantor pusat perusahaan.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Perangkat Baru Enmair Pencabut benda kerja elektropneumatik ER tersedia segera dari stok Seri ER, Tipe 650 Rentang penggunaan mulai dari 5 ton hingga 150 ton (tergantung pada jenisnya) – mesin cetak injeksi Jarak pergerakan horizontal 650 mm Iiedpfxjr A D Ito Ahyjh Jarak pergerakan vertikal 125 mm Sudut putar 5 derajat Sudut penjepit Berat angkat sekitar 3 kg Gagang di bagian belakang memungkinkan perubahan sudut putar ke kanan/kiri dengan mudah, sesuai kebutuhan. Tekanan udara kerja yang dibutuhkan 5 - 7 bar 220V 50 Hz Perangkat dapat ditawarkan dengan konektor Euromap 12 atau Euromap 67, tergantung pada persiapan yang ada pada mesin cetak injeksi. Antarmuka pengguna: Bahasa Inggris, Bahasa Belanda

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Iiedpfxjuc Idxe Ahysh Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lifting table Control: MCS Evolution Software included Iijdjq Rffiepfx Ahysh Lifting table dimensions (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Max. cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 125 Scoring saw (max. saw diameter): 20 mm Main saw (max. saw diameter/power): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 - 150 No. of front air flotation tables with 90° rotation device: 1 (2100 x 4100 mm) Total connected load (kW): approx. 36

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 16 kg, jangkauan lengan: 1.610 mm, KR 16 dirancang untuk kapasitas beban nominal 16 kg guna mengoptimalkan kinerja dinamis robot. Aplikasi Utama: - Pengelasan - Pendistribusian Iisdpoq A Uiusfx Ahyeh - Manufaktur Aditif Model: KR16 Standar & Foundry (opsi lainnya juga tersedia) Kondisi: Bekas & Telah Diuji Tahun: 2006 Lemari Pengontrol: KRC2 ed05 Termasuk: Manipulator + Lemari Pengontrol KRC2 ed05 + Semua Set Kabel + Pengontrol Genggam (genggaman dan alas tidak termasuk) Silakan hubungi kami untuk mendapatkan penawaran harga dan juga opsi perbaikan. Sebagai PLC Merkezi EOOD, kami memiliki lebih dari 300 robot dalam inventaris kami dan bekerja sama dengan merek-merek seperti KUKA, ABB, FANUC, dan Motoman. (Sumber: Situs Web KUKA)

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lift table Control: MCS Evolution Software included Lift table (mm): No. 1 Rear Sliding Device Program-controlled Pusher Device No. 9 Gripper Clamps Max. cutting width (mm): 3300 Pusher effective stroke (mm): 3300 Max. saw blade projection (mm): 105 Iiedpfx Aep R Sdhohyeh Max. gripper opening (mm): 105 Scoring saw (max. blade diameter, mm): 200 Main saw (max. blade diameter / power): 360 mm / 18 kW Adjustable saw carriage feed rate (m/min): 5–120 No. 3 Front Air Cushion Tables Total connected load (kW): Approx. 21

Kondisi: sangat baik (bekas), PUSAT PEMESINAN CNC 3-SUMBU (X-Y-Z) Dikelilingi oleh pagar pengaman dengan pintu samping Penutup kedap suara untuk kedua unit pemesinan dan alas kaki pengaman di bagian depan Data teknis berikut adalah PERKIRAAN dan tidak mengikat: Kontrol NC dengan perangkat lunak Biesse Works Dimensi benda kerja (area kerja maks.): Panjang (X) mm 90 – 3000 x Lebar (Y) mm 70 – 1000 x Ketebalan (Z) mm 8 – 60 (untuk benda kerja yang lebih panjang dari 2000 mm, ketebalan minimum meningkat hingga 13 mm) No. 2 penjepit untuk memposisikan benda kerja melalui meja bantalan udara dari atas dan bawah Pengeluaran otomatis untuk menurunkan benda kerja dengan sabuk penggerak pada rel plastik UNIT PEMESINAN BAWAH: - No. 1 spindel elektrik dengan adaptor HSK D-50 (daya 4,8 HP) dengan konverter frekuensi statis - No. 1 gergaji profil (arah tetap di X), diameter mm 150, daya 2,3 HP dengan inverter statis - No. 29 spindel bor vertikal - No. 10 spindel bor horizontal (8 di arah X dan 2 di arah Y negatif) UNIT PEMESINAN ATAS: - No. 1 spindel elektrik dengan adaptor HSK D-50 (daya 4,8 HP) dengan konverter frekuensi statis Iiodpfx Ahezy Ngwjyeh - No. 1 gergaji profil (arah tetap di X), diameter mm 150, daya 2,3 HP dengan inverter statis - No. 29 spindel bor vertikal - No. 10 spindel bor horizontal (8 di arah X dan 2 di arah Y negatif)