Beli Doosan Lynx 2100 bekas (1.877)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Doosan Puma 300MC Poros C, alat penggerak, Sumbu C 360° (0,001°) Tahun 2007 Fanuc 21iTB dengan Manual Guide Chuck 12 inci 315 mm Samchully Lubang spindle 102 mm Maks. diameter pembubutan 355 mm Perjalanan sumbu: X – 250 mm Z – 680 mm Dodpfxeyrb Urs Aaqskl Kepala BMT 65 Tailstock Probe alat Pembuang serbuk, bak dengan pompa pendingin Holder alat Dokumentasi mesin Kondisi sangat baik

Kondisi: siap digunakan (bekas), hidrolik ganda, injektor baru, turbo baru Dkodpfx Aajyxbk Ieqsl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 8.200 h, kapasitas angkut: 9.000 kg, tinggi angkat: 3.100 mm, jenis bahan bakar: diesel, Perlengkapan: kabin, Diesel Forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8,235 h Own weight (kg): 12,197 Load capacity (kg): 9,000 Lifting height (mm): 3,100 Side shift Mast type: STD Fuel type: diesel After major technical overhaul worth over €7,000: - new tires - new forks - hydraulic cylinder refurbishment - gearbox: new clutch plates and seals - brakes: new discs and bearings Dkjdpjvfp Rdjfx Aaqjl - all oils, fluids, and filters replaced Technical condition: used, very good

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 5.156 h, 2018 | Doosan DX235LCR-5 | Used Crawler Excavator | 5,156 hours 📍 Location: Germany 🚛 Delivery to your destination available – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115,500 or Make an Offer. Payment on delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points: 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Doosan DX235LCR-5 crawler excavator from 2018. Short-tail version. The boom measures 5.80m (main boom 3.10m, variable section 2.90m) and the arm 2.40m. Track shoe width: 600mm. The condition of the machine matches the operating hours. The machine exhibits wear to pins and bushings typical for its age, hours, and intended use, as well as signs of use (dents, abrasions, etc.). At the time of inspection, the machine operated without any noticeable issues. Machine has been serviced. The sprocket should be replaced. After the inspection, the customer decided to keep the digging bucket, so the bucket shown in the photos is NOT included in the sale! 📄 Want to see the full inspection report, additional photos, or a video? Tip: The reference number "33296 Equippo" is often used when searching for more details online. Dkedpfx Aeyfxv Tsaqol 💡 Why choose this machine and our service: ✔ Professional and thorough inspection ✔ Onsite/jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment? We provide convenient tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 6.280 h, kapasitas angkut: 3.500 kg, tinggi angkat: 5.205 mm, pengangkatan bebas: 1.700 mm, jenis bahan bakar: gas, tipe tiang: triplex, tinggi konstruksi: 2.515 mm, panjang garpu: 1.500 mm, berat kosong: 5.500 kg, panjang total: 3.200 mm, jenis penggerak: Treibgas, lebar konstruksi: 1.800 mm, Forklift gas LPG Titik berat beban: 500 Tipe tiang: Triplex Kondisi teknis: normal Tipe ban depan: super elastik Kondisi ban depan: 80 - 100% Tipe ban belakang: super elastik Dodpjytkkfefx Aaqjkl Kondisi ban belakang: 80 - 100% Sisipan samping, alat pengatur garpu, Katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, penutup atap, kaca depan, pengangkatan bebas penuh,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 11.000 h, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: Heidenhain, Kami menawarkan pusat pemesinan vertikal Doosan DNM 6500 dalam kondisi sangat baik, tahun pembuatan 2016. Pabrikan: Doosan Model: DNM 6500 II Tipe: pusat pemesinan vertikal Tahun: 2016 Nomor seri: Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami. Dedpjyyiyysfx Aaqskl

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 634 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.000 mm, jenis bahan bakar: listrik, tinggi konstruksi: 3.000 mm, Perlengkapan: pelindung kepala,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Data Umum Berat mesin: 6500 kg Unit Kontrol Merek: FANUC Penggerak Utama Jumlah sumbu: 3 Pergerakan Pergerakan Sumbu X: 1020 mm Pergerakan Sumbu Y: 540 mm Pergerakan Sumbu Z: 510 mm Perlengkapan Tambahan Pendinginan melalui spindel Persiapan untuk sumbu ke-4 Unit pendingin eksternal Djdpex D Igdjfx Aaqokl DOOSAN DNM 500 3-axis ini diproduksi tahun 2011. Memiliki ukuran meja yang kokoh yaitu 1200 × 540 mm serta jangkauan sumbu 1020 × 540 × 510 mm. Dilengkapi pendinginan melalui spindel dan persiapan untuk sumbu ke-4, menawarkan kapabilitas pemesinan yang lebih tinggi. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal DOOSAN DNM 500 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, de Dksdpfx Aaox D R R Eoqsl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 53 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 33.000 W, produsen pengendali: SIEMENS, model controller: 828D, jumlah sumbu: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. This machine is ideal for complex machining tasks, delivering robust performance and durability. If you are seeking high-quality turning capabilities, consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for further information. Additional Equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • The machine includes a rotary indexing magazine Dedpfoyr R A Esx Aaqokl • The machine includes a gantry robot Machine Benefits Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Tool holder size: 25 x 25 mm • Boring bar holder: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Main spindle nose: A2 #8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm • Sub spindle nose: A2 #5 • Number of stations: 24 (12 driven) Additional Information Machine still under power.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 10.104 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 765 mm, jarak gerak sumbu Z: 520 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 36 m/menit, Perlengkapan: konveyor serpihan, DOOSAN VC 630 5AX (Pusat pemesinan 5-sumbu) Model: VC 630 5AX HEIDENHAIN TNC640 NC Tahun pembuatan: 2018 Kondisi: Bekas, sangat baik, masih dalam produksi Jam operasi: 26.290 jam Jam spindle: 10.104 jam Dsdjyxb S Sspfx Aaqjkl Sumbu X: 650 mm Sumbu Y: 765 mm Sumbu Z: 520 mm Sumbu A: +30° hingga -120° Sumbu C: 360° Pergerakan cepat sumbu X: 40 m/menit Pergerakan cepat sumbu Y: 40 m/menit Pergerakan cepat sumbu Z: 36 m/menit Beban maksimum meja: 500 kg Spindle: 16.000 rpm 30/24 kW Holder alat: HSK 63A Pendingin melalui spindle: 18 bar Tinggi: 3.295 mm Lebar: 3.200 mm Panjang: 4.585 mm Berat: 13.500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jam operasional: 30 h, berat keseluruhan: 34 kg, jumlah sumbu: 6, DOOSAN M0617 6-sumbu ini diproduksi pada tahun 2024. Robot ini memiliki jangkauan maksimum 1.700 mm dan kapasitas angkat 6 kg, sehingga cocok untuk berbagai aplikasi. Jika Anda mencari robot kolaboratif berkualitas tinggi, pertimbangkan mesin DOOSAN M0617 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Kapasitas angkat: 6 kg • Jangkauan maks.: 1.700 mm Dodpfx Aasypkq Rsqskl • Akurasi pengulangan: +/-0,01 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.600 rpm, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 50 mm, produsen pengendali: FANUC, jumlah sumbu: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning center equipped with two spindles and two turrets, featuring a Fanuc 18i-TB control unit. Key specifications include a maximum turning diameter of 330 mm, a turning length of up to 500 mm, and a bar capacity of 76 mm. The main spindle achieves a maximum speed of 3,500 rpm, while the sub-spindle can reach up to 6,000 rpm. If you are looking for a high-quality lathe, consider the DOOSAN Puma TT 2500 SY machine we are offering for sale. Please contact us for further information. Dkodpfx Aajx Rd Hvjqol • Maximum turning diameter: 330 mm (12.99 in); upper turret: 390 mm • Maximum turning length: 500 mm (19.6 in) • Bar capacity (main spindle): 76 mm (2.99 in) • Travel paths: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) • Sub-spindle speed: 6,000 rpm • Sub-spindle motor power: 7.5 / 11 kW • Note: The series was introduced in the mid-2000s.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 10.346 h, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 650 mm, jumlah sumbu: 3, en Dkjdsx Uq Hdepfx Aaqjl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 1.020 mm, jarak lintasan sumbu Y: 540 mm, jarak gerak sumbu Z: 510 mm, tinggi total: 2.700 mm, beban meja: 800 kg, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 18.500 W, panjang produk (maks.): 3.985 mm, jumlah sumbu: 4, This 4-axis DOOSAN DNM 500II vertical machining center was manufactured in 2016 and features a table size of 1200 × 540 mm with a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this machine offers efficient machining capabilities. Please check the availability of this DOOSAN DNM 500II vertical machining center for purchase. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: Swing-arm, 30 stations • Coolant: Through-spindle coolant 20 bar, flood coolant • Preparation: 4-axis preparation • Control: FANUC Oi-M Easy Guide; look-ahead for 200 blocks; electronic handwheel; USB port Dksdpfx Aoyg Iltjaqel • Other features: Automatic door opening/closing; 3-color status indicator; documentation and CD-ROM • Condition: Good; perfect working condition • Availability: Immediately available Additional Equipment • 4th Axis: NIKKEN CNC202FA • Chip conveyor • Belt oil skimmer • Air/coolant guns Technical Specification Taper size: BT 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: FANUC, model controller: 31i CNC, tinggi total: 3.760 mm, berat keseluruhan: 26.000 kg, kecepatan spindel (maks.): 6.000 rpm, berat alat: 30.000 g, jumlah sumbu: 4, This horizontal 4-axis machining center DOOSAN HM 8000 was manufactured in 2014. Equipped with a Fanuc 31i CNC control, it offers a maximum workpiece diameter of 1450 mm and a weight capacity of 2000 kg. It features a high-pressure through-spindle coolant system, a chip conveyor, and both workpiece and tool measuring probes. If you are looking for a high-quality milling machine, you should consider the DOOSAN HM 8000 that we have for sale. Contact us for further information about this machine. Additional Equipment • Belt oil skimmer • Triple signal tower • Shower coolant system • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shut-off • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Advantages Technical Machine Advantages • Equipped with Fanuc 31i CNC control • B-axis: indexed in increments • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type BT 50 • Max. torque: 1732 Nm Dodpeyair Uefx Aaqokl Additional Information Machine still under power Dimensions Machine Depth 8150 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 2.850 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, produsen pengendali: SIEMENS, tinggi total: 2.985 mm, berat keseluruhan: 5.000 kg, jumlah slot dalam magazin alat: 30, berat alat: 8.000 g, jumlah sumbu: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It is equipped with a SIEMENS 828 D CNC control and features an X-axis travel of 800 mm, a Y-axis travel of 450 mm, and a Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. The machine comes with a 30-position tool magazine and additional equipment such as a chip conveyor and an electronic handwheel. Please contact us for further information about this machine. Additional equipment • Electronic handwheel Dedjx D E H Iepfx Aaqekl • Chip conveyor • Oil skimmer • Coolant flushing gun • 2 x hydraulic vices • 25 x BT40 tool holders Machine advantages Technical advantages • Table dimensions: 1000 x 450 mm • Distance spindle nose to table surface: 150 - 775 mm • Max. tool diameter with free adjacent pockets: 125 mm • Max. tool diameter with occupied adjacent pockets: 80 mm Additional information Machine still under power Dimensions Machine depth: 2158 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, produsen pengendali: FANUC, model controller: F0i-F, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, en Dodpfx Asx D Sqteaqokl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 5.477 h, kecepatan spindel (maks.): 3.500 rpm, tinggi total: 1.863 mm, berat keseluruhan: 6.000 kg, produsen pengendali: FANUC, model controller: I series, jumlah sumbu: 3, en Dsdpfxox D N Nas Aaqskl

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 482 h, tinggi angkat: 4.900 mm, jenis bahan bakar: listrik, produsen motor: Elektro, tipe perpindahan gigi: otomatis,

Kondisi: bekas, Tahun pembuatan: 2020, drehmaschinen01 Dsdpfsyrfl Uex Aaqekl

Kondisi: bekas, Tahun pembuatan: 2007, CNC lathe 2-sumbu Doosan Puma 300LC Tahun 2007 Fanuc 21iTB dengan Manual guide - Sumbu Z 1330mm - Sumbu X 282mm - Diameter pembubutan 400mm - Panjang pembubutan 1280mm - Chuck Samchully 12 inci (315mm) - Lubang spindle 103mm - Kepala alat 10 posisi - Tailstock - Probe alat - Konveyor serpihan - Bak dengan pompa - Dokumentasi mesin Dkedpfxjymlh So Aaqjl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 350 mm, daya motor spindle: 4.000 W, kecepatan spindel (maks.): 4.500 rpm, lubang spindel: 65 mm, kecepatan rotasi (maks.): 4.500 rpm, jenis arus masuk: tiga fasa, saluran batang: 65 mm, Diameter batang (maks.): 65 mm, hidung spindel: A2-6, diameter ayun di atas peluncur melintang: 550 mm, berat keseluruhan: 3.800 kg, DOOSAN S310SML CNC lathe with IEMCA MASTER 880MP bar feeder Robust and high-performance CNC turning and milling center from Doosan, ideal for precise series production in mechanical engineering. The machine is equipped with a Fanuc Series 18T control system and delivers reliable performance along with high productivity. Dksdpfxeyw Rikj Aaqol The DOOSAN S310SML offers a maximum turning length of 750 mm and a maximum turning diameter of 350 mm. The spindle reaches speeds of up to 4,500 rpm with a spindle bore of 65 mm, enabling efficient machining of bar stock. Featuring an A2-6 spindle nose and a swing over bed of 550 mm, the machine ensures stable and precise machining characteristics. The powerful spindle motor provides consistent output in continuous operation. Additionally, an IEMCA MASTER 880MP bar feeder is integrated, guaranteeing automated material feeding and making the machine optimally suited for series production. Technical highlights: Control: Fanuc Series 18T Turning length: 750 mm Turning diameter: 350 mm Max. spindle speed: 4,500 rpm Spindle bore / bar capacity: 65 mm Spindle nose: A2-6 Swing over bed: 550 mm Total weight: approx. 3,800 kg The machine is in good used condition and is ready for immediate operation.

Kondisi: bekas, nomor mesin/kendaraan: FBA11-2390-00377, Tahun pembuatan: 2015, jam operasional: 7.513 h, tinggi angkat: 4.750 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tipe perpindahan gigi: otomatis, tegangan baterai: 48 V, panjang garpu: 120 mm, warna: oranye,

Kondisi: baik (bekas), Tahun pembuatan: 2003, Ref.-No.: 10454 Produsen: DOOSAN Tipe: DAEWOO PUMA 300 MSC Tahun pembuatan: 2003 Jenis kontrol: CNC Kontrol: FANUC 18i-TB Lokasi gudang: Halberstadt Negara asal: Korea Selatan No. mesin: 0MS19XX Kecepatan putar: 4500 rpm Besar lubang bar: 62 mm Panjang pemesinan: 595 mm Jumlah posisi turret: 12 unit Informasi tambahan: - 4 sumbu (X/Z/C/B) - Spindle belakang - Stasiun alat penggerak - Sistem pengambilan benda jadi - Konveyor - Konveyor serbuk - Sistem pendingin Powercool - Bar feeder LNS Quickload Servo 3 - Pemegang alat - Pemegang penjepit - Collet Dsdpoym Nbvofx Aaqskl Mesin dapat diperiksa dalam kondisi operasi sesuai kesepakatan.