Beli Haas Ds-30Ss Dual Spindle Lathe bekas (18.846)

Kondisi: bekas, nomor mesin/kendaraan: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Cedpfx Ajuqb Emeiusrc Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42-2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws Credpfxevrcqde Aiuoc >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake Cjdpfjvrckqex Aiujrc >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Cjdpev Tyzcofx Aiuorc Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: Crsdpfsvv Etvox Aiuec >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction Codpevrdlcjfx Aiuorc >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm Cjdowrm Dtjpfx Aiusrc >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg Crodpfxowthbie Aiuoc >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) Codpfjwag Stjx Aiuorc >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: bekas, Tahun pembuatan: 1999, kurvengesteuerter-Mehrspindeldrehautomat-Schütte-SF20SDnt Csdpfsx Sx Nhjx Aiusrc

Kondisi: baik (bekas), 1 mesin bubut dengan poros utama dan poros ulir bekas, merek Weiler, tipe Condor VS 2 Data teknis: Tinggi senter: 160 mm Jarak antara senter: 800 mm Lubang spindle: 40 mm Lebar alas: 240 mm Putaran spindle: 12 - 2800 rpm Daya motor: 3 kW Kepala tailstock: MK 3 Jarak gerak pinol: 110 mm Feeding: 0,037 - 1,253 mm/putaran Cedpfx Aiew Rcrcjuerc Bobot sekitar 800 kg Dimensi (PxLxT) sekitar 1930 x 880 x 1470 mm Perlengkapan: Chuck tiga rahang Sistem pemegang cepat Multifix

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Main spindle: Max. bar capacity: 65mm, draw tube bore: 75mm, collet chuck diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Sub-spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis sub-spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal feed force (S1): 2,400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Workpiece discharge (UA-WA): max. discharge weight: 4daN, max. discharge diameter: 70mm. Total number of tool stations: 12, tool holder clamping diameter: 30mm, driven tool positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4,000/min): 2.9kW, CNC control: Siemens 840D, operator panel: ErgoLine, display: 19” TFT color, spindle count (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h powered on, 48,657h in production. Machine runs on cutting oil. Including documentation and FMB Turbo 8-80 XT 3200 bar feeder. On-site inspection possible. Codpfx Aoyln Ekjiuorc

Kondisi: baik (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 2420701,

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Crodpsmf Aw Aefx Aiuec

Kondisi: bekas, Tahun pembuatan: 1995, diameter pembubutan di atas alas geser: 500 mm, Universal lathe Manufacturer: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Type: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions: L 2.7 x W 1.2 x H 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm Crsdpfswudhujx Aiuoc • Quick-change tool holder • Rotating centre • Coolant pump • Machine lamp All details without guarantee. A demonstration under power is possible at any time in our showroom.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Two identical Emag VSC 200 machines are available. X-axis travel: 685mm, Z-axis travel: 160mm, chuck diameter: 200mm, swing diameter: 290mm, connected load: 29kW, control system: SIEMENS SINUMERIK. Dimensions: length 2700mm, width 1150mm, height 2800mm. Weight: 6.5t. Supplied with documentation. Crjdpfx Aism H Urhjujc

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Codpfx Aow I A Uxsiuerc Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: baru, Made in Italy. Centre Height: 300 mm Swing over Bed: 600 mm Swing over Cross Slide: 380 mm Distance Between Centres: 1,500 mm Bed Width: 400 mm Spindle Bore: 82 mm Spindle Nose: Camlock 8" Spindle Speeds: (12) 16 - 1,200 rpm Motor Power: 9.2 kW (special option / standard: 7.5 kW) Feed Rate Z-Axis: (93) 0.028 - 6.43 mm/rev Feed Rate X-Axis: (93) 0.012 - 2.73 mm/rev Metric Threads: (54) 0.5 - 224 mm Whitworth Threads: (55) 72 - 1/8 TPI Module Threads: (54) 0.5 - 112 mm Diametral Pitch Threads: (54) 64 - 1/4 D.P. Cross Slide Travel: 340 mm Top Slide Travel: 150 mm Tailstock Quill Diameter: 85 mm Tailstock Quill Travel: 200 mm Tailstock Taper: MT 5 Weight: approx. 3,200 kg Features: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Multifix quick-change toolpost system with 4 inserts - Pneumatically assisted tailstock movement - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical components made from high-quality brands, e.g. Siemens/Schneider Crjdpsd Nk Ncsfx Aiujc - Guideway lubrication via hand pump - Reducing sleeve - 2 fixed centre points - All safety devices to CE standards: chuck guard with plexiglass window, safety micro-switch protected. Toolholder guard with plexiglass window. Rear splash guard, full length. Leadscrew and feed shaft light barrier protection (integrated into emergency stop circuit). Emergency stop strike button. - Swarf container on wheels - Electric coolant system - Fixed steady rest - Travelling steady rest - Operator’s tools, acceptance protocol according to DIN, operation and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard EMO special price incl. 3-axis digital readout.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 570 mm, diameter pembubutan: 800 mm, tinggi pusat: 400 mm, lebar di tengah: 4.000 mm, panjang pembubutan: 3.800 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Diameter putar: 800 mm Tinggi senter: 400 mm Panjang pembubutan: 3.800 mm Jarak antara senter: 4.000 mm Codpfx Ajw Rqrwjiuorc Maks. Ø ayunan di atas carriage: 570 mm Maks. Ø ayunan di cekungan: 1.130 mm Spindel kerja Kepala spindel sesuai DIN: 55027, ukuran 11, tapers dalam 20 Diameter spindel pada bantalan depan: 165 mm Lubang spindel: 120 mm Diameter piring chuck: 564 mm Maks. Ø chuck: 380 mm Kecepatan spindel maks.: 750 rpm Kepala lepas Taper kepala lepas: Morse 6 Diameter pinol: 110 mm Maks. stroke pinol manual: 310 mm Kecepatan feeding Carriage panjang: 0,092 - 1,590 mm/menit Carriage melintang: 0,046 - 0,795 mm/menit DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 6600 x 1850 x 2250 mm Berat: 10.900 kg PERLENGKAPAN Aksesori lengkap disertakan

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 60 mm Turning length 200 mm Number of slides Total power requirement 20 kW Machine weight approx. t Space requirements approx. m Spindle bore 30 mm, Control system INDEX C 200, Spindle speed 7,500 rpm, Cjdpfst Hw Atox Aiuorc rear-side machining, 3-jaw chuck, driven tools, workpiece loader WHU 80

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws Cedpfxevivmys Aiuorc >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet, 3-Axis Digital Readout by Fagor, from University Use Technical Data: >> Centre Height: 120 mm >> Distance Between Centres: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely Variable Spindle Speeds: 30–3000 rpm Accessories: 3-axis digital readout by Fagor Cedoxyh Ndepfx Aiuerc Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Tool holder >> Drill chuck; live centre >> Collet chuck system with collets >> Steady and follower rest >> Machine mounts >> and much more About the Machine: We offer a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. At high spindle speeds, the Lorch also runs quietly. The machine is equipped with a 3-axis digital readout from Fagor and comes with a wide range of accessories. It was previously installed in a university setting. Take advantage of the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. Cedpfx Aioxcuazouerc - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Csdpfx Aewrmuxoiuerc >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Crjdjw Nw Dqjpfx Aiuec >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.