Beli Heesemann Impression Platinum bekas (888)

Kondisi: bekas, 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg GTOZP-52+ N+P Laodpfsy Ndhkex Aatsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Safety Tester with Scanner for High Voltage Test Bench - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON model of the latest generation, is based on ARM Dual Core technology components and controlled by DSP. This technology provides the operator with optimal stability and repeatability of measurements. High accuracy and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates operation of the SEFELEC 506-S test station when integrated into a test stand or bench. The 7" touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. Laodpfxjxqxw Te Aateb - Standard interfaces: Ethernet / RS232 / USB / PLC - Option: IEEE488-2 Interface - Dual safety circuit SIL2 - Automatic selection of the test series - Sequence mode for combining several consecutive tests Dielectric strength up to 5 kVAC 500 VA and 6 kVDC Detection modes based on current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Option: 2 TΩ range PE (Protective Earth) measurement at 32A - 8 VAC, measurement 0 ... 1 Ω Option: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multiple ramp mode, up to 7 stages TFT touchscreen 7”, 16 million colors, for programming and for displaying ongoing tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum accuracy, stability, and repeatability Integrated DSPs enable higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Particular requirements for testing and measuring circuits) Shipping possible by arrangement. #8312-2

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, High-Voltage Test Bench Safety Tester - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S electrical safety tester, a new-generation EATON model, is based on ARM Dual Core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of production quality assurance and goods-in inspection. The sequence function facilitates operation of the SEFELEC 506-S testing station when integrated into a test stand or bench. The new SEFELEC series 7” touchscreen provides simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic test sequence selection - Sequence mode for combining multiple successive tests Dielectric strength at 5kVAC 500VA and 6kVDC Detection by current threshold or current fluctuation (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range Laodpfjxqxt Iox Aatsb PE test at 32A - 8VAC, measurement 0 ... 1Ω Optional: 50A test current Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 stages TFT touchscreen 7”, 16 million colors, for programming as well as displaying active test procedures and results Integrated ARM Dual Core Control & 3D NAND technology for optimal accuracy, stability, and repeatability Integrated DSPs enable faster test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for measurement, control, and laboratory electrical equipment — Part 2-034: Particular requirements for measurement equipment used for testing insulation resistance and dielectric strength) Shipping possible on request. #8312-1

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 570 mm, produsen pengendali: FANUC, model controller: Series Oi-MC, tinggi total: 2.800 mm, lebar total: 2.900 mm, beban meja: 800 kg, berat keseluruhan: 5.500 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 15.000 W, jumlah slot dalam magazin alat: 24, berat alat: 8.000 g, panjang produk (maks.): 3.300 mm, jumlah sumbu: 3, This 3-axis vertical machining center FERMAT VMF 1000 was manufactured in 2008. It features a table size of 1300 x 600 mm and a maximum table load capacity of 800 kg. The machine offers impressive travel distances of the X, Y, and Z axes: 1000 mm, 600 mm, and 570 mm, respectively. If you are looking for high-quality machining capabilities, you should consider the FERMAT VMF 1000 machine, which we are offering for sale. Please contact us for further details. • Table dimensions: 1300 x 600 mm • Distance from table to floor: 880 mm • T-slots (width x spacing x number): 16 x 86 x 5 mm • Inner diameter of spindle bearing: 70 mm • Distance from table to spindle: 115–685 mm • Main motor power: 11/15 kW (standard), 12/16 kW (standard), 15/18.5 kW (option) • X/Y/Z ball screw: Ø40 x P12 x C3 • Drive type: Direct • XYZ rapid traverse: 24 m/min • XYZ max. working feedrate: 10 m/min • X-axis linear guideway (W x H x L): 80 x 35 x 460 mm • Y-axis linear guideway (W x H x L): 110 x 35 x 600 mm • Z-axis linear guideway (W x H x L): 80 x 35 x 300 mm • Tool holder: ISO 40 • Tool change time (tool-to-tool): 4 seconds • Magazine pocket pitch: 76.2 mm • Max. tool length: 300 mm Ledpfjy Nmr Ssx Aateab • Positioning accuracy: ±0.005/300 mm • Repeatability: 0.005 mm • Pneumatic pressure: 6 bar • Total connected load: 35 kVA Technical specification Taper size: ISO 40

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.301 kg, berat kosong: 3.301 kg, berat operasi: 3.301 kg, Tahun pembuatan: 2026, HYDRAULIC HAMMER SHB165 STEELITE hydraulic hammers in the medium size class impress with their high impact power, robust design, and reliable performance in daily construction site operations. Ideally suited for demolition, civil engineering, road construction, and recycling tasks, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened construction ensures high working comfort and minimizes the load on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum security and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1 year warranty - Excellent value for money - High impact power in a compact design - Excellent spare parts availability - Various mounting options available Laodsy St Ryepfx Aatjb - Ready for immediate use SCOPE OF DELIVERY - SHB165 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with steel hose protection - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL SPECIFICATIONS - Weight: 3301 kg - Oil flow: 220–270 l/min - Max. operating pressure: 250 bar - Chisel diameter: 165 mm - Automatic lubrication system - Equipment damping - Suitable for carrier machines: 33–40 t Advantages of STEELITE hydraulic hammers - High breaking performance with smooth operation - Efficient power transmission for economical working - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal ratio of performance, weight, and durability

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.855 kg, berat kosong: 1.855 kg, berat operasi: 1.855 kg, Tahun pembuatan: 2026, HYDRAULIC HAMMER SHB140 The STEELITE hydraulic hammers in the medium-size class stand out thanks to their high impact energy, robust construction, and reliable performance on construction sites every day. Ideal for demolition, civil engineering, road construction, and recycling tasks, they offer an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-dampened design ensures high working comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum security and cost efficiency. YOUR ADVANTAGES AT A GLANCE • 1-year warranty • Excellent price-performance ratio • High impact force in a compact design • Excellent spare parts availability • Various mounting options available • Ready for immediate use SCOPE OF DELIVERY • SHB140 hydraulic hammer • 1x pointed chisel • 1/2" hydraulic hoses with metal hose protection • Accessory box • Operating manual (German) • CE declaration of conformity Lasdjy St N Aopfx Aateb TECHNICAL DATA • Weight: 1855 kg • Oil flow: 120–180 l/min • Max. operating pressure: 210 bar • Chisel diameter: 140 mm • Automatic lubrication system • Equipment damping • Suitable for carrier machines: 20 – 26 t Advantages of STEELITE Hydraulic Hammers • High demolition performance with smooth operation • Efficient power transmission for cost-effective work • Long service life and low maintenance costs • Robust design for maximum operational safety • Optimal balance of performance, weight, and durability

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.366 kg, berat kosong: 1.366 kg, berat operasi: 1.366 kg, Tahun pembuatan: 2026, HYDRAULIC BREAKER SHB125 The STEELITE hydraulic breakers in the medium size class impress with their high impact power, robust construction, and reliable performance in daily jobsite use. Ideal for demolition, civil engineering, road construction, and recycling operations, they provide an optimal combination of impact energy, efficiency, and durability. The sound- and vibration-damped design ensures excellent operator comfort and minimizes stress on the carrier machine. Benefit from a strong spare parts supply and a 1-year warranty for maximum safety and efficiency. Lajdpfx Aoy St Nijatob YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Outstanding price-performance ratio - High impact power in a compact design - Excellent spare parts availability - Various mounting options - Ready for immediate use SCOPE OF DELIVERY - SHB125 hydraulic breaker - 1x moil point chisel - 1/2" hydraulic hoses with metal hose protection - Accessory box - Operating manual (German) - CE Declaration of Conformity TECHNICAL DATA - Weight: 1,366 kg - Oil flow rate: 90–120 l/min - Max. operating pressure: 210 bar - Tool diameter: 125 mm - Automatic lubrication system - Equipment damping - Suitable for carrier machines: 14–18 t Advantages of STEELITE Hydraulic Breakers - High breaking performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal ratio of performance, weight, and durability

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 835 kg, berat kosong: 835 kg, berat operasi: 835 kg, Tahun pembuatan: 2026, HYDRAULIC HAMMER SHB100 The STEELITE hydraulic hammers in the medium range stand out for their high impact force, robust construction, and reliable performance in daily construction site operations. Ideal for demolition, civil engineering, road construction, and recycling applications, they offer an optimal combination of impact energy, efficiency, and durability. The noise- and vibration-dampened design ensures high operating comfort and minimizes stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Excellent price-performance ratio - High impact force with compact design - Excellent spare parts supply - Various mounting options available - Ready for immediate use SCOPE OF DELIVERY - SHB100 hydraulic hammer - 1x pointed chisel - 1/2" hydraulic hoses with metal hose protection Lasdjy St Huopfx Aateb - Accessory box - Operating manual (German) - CE declaration of conformity TECHNICAL DATA - Weight: 835 kg - Oil flow rate: 80–110 l/min - Max. operating pressure: 210 bar - Chisel diameter: 100 mm - Automatic lubrication system - Equipment damping - Suitable for carriers: 10 – 14 t Advantages of STEELITE hydraulic hammers - High demolition performance with smooth running characteristics - Efficient power transmission for economical operation - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of performance, weight, and durability

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 560 kg, berat kosong: 560 kg, berat operasi: 560 kg, Tahun pembuatan: 2026, HYDRAULIC BREAKER SHB85 – COMPACT, POWERFUL & RELIABLE The SHB85 hydraulic breaker impresses with its robust construction, high impact energy, and excellent value for money. Ideal for demolition, landscaping, civil engineering projects, as well as municipal applications. Thanks to its compact design, the breaker is perfectly suited for mini and compact excavators from 7 to 11 tons. Ljdpfey St Ewsx Aatsab Benefit from excellent spare parts availability and a 1-year warranty for maximum security and cost-efficiency. YOUR ADVANTAGES AT A GLANCE 1-year warranty Outstanding value for money High impact energy with compact design Excellent availability of spare parts Various mounting options available Ready for immediate use SCOPE OF DELIVERY SHB85 hydraulic breaker 1x chisel point 1/2" hydraulic hoses with metal hose protection Accessory box Operating manual (German) CE declaration of conformity TECHNICAL DATA Weight: 560 kg Required oil flow: 60–100 l/min Max. operating pressure: 180 bar Blow rate: 400–800 bpm Chisel diameter: 85 mm Suitable carrier machines: 7 – 11 t The SHB85 is the ideal solution for anyone looking for a reliable and powerful hydraulic breaker at an attractive price. We are happy to advise you on the appropriate mounting for your machine.

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 716649, saluran warna: 4, lebar kertas (maks.): 520 mm, tinggi kertas (maks.): 360 mm, pembacaan penghitung (warna): 78.085.003, Spesifikasi Teknis: Model: Heidelberg GTO 52-4 Tahun Pembuatan: 1998 Jumlah Unit Cetak: 4 Total Lembar Cetak: 78 juta Ukuran Lembar Maks.: 360 x 520 mm Laodpfx Aey Sggzeateb Ukuran Lembar Min.: 105 x 180 mm Kecepatan Maks.: 8.000 lembar per jam Perlengkapan & Fitur: Sistem Pembasahan: Sistem pembasahan kontinu Alcolor (menjamin keseimbangan tinta-air yang cepat) Konsol Kontrol: Konsol Classic Center untuk kontrol tinta dan register. Penggantian Pelat: Pengunci pelat pelepas cepat. Kondisi: Mesin dalam kondisi kerja sangat baik, terawat dengan baik, dan rutin diservis. Fungsi: Mesin sepenuhnya berfungsi dan dapat diinspeksi saat produksi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 31.460 h, jarak pergerakan sumbu X: 935 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530 HSCI, beban meja: 1.500 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, a Y-axis travel of 850 mm, and a Z-axis travel of 650 mm. The machine is equipped with a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking for high-end machining capabilities, you should consider the DMG MORI DMU 85 monoBLOCK vertical machining center we are offering for sale. Contact us for further details. • Maximum feed rate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar Laodpfoyt Rdrjx Aateb • Mode 4 operation: process monitoring (machining with the work area door open permitted) • Repairs/Maintenance: • C-axis seal replaced shortly after the warranty period (upgraded version) • Spindle replaced (05/2021) • Machine inspected last year – circular interpolation (ballbar) within tolerance • Typical application: • Duralumin machining 80% total • 3-axis: 50% • 5-axis: 40% (up to 10% continuous 5-axis machining) Additional Equipment • Probe: TS649 • Tool setter: Blum Laser • 3D quickSET • Electronic handwheel • Rinsing gun • Chip conveyor • 70-80 pieces HSK 63 tool holders (various assemblies), including several end mills, T-slot cutters, 2 sets of KAISER boring heads, JAGER 60,000 rpm electric spindle, and more. Technical Specification Taper Size: HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 3.875 h, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 2.950 mm, lebar total: 2.200 mm, berat keseluruhan: 9.000 kg, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 590 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, panjang produk (maks.): 2.650 mm, jumlah slot dalam magazin alat: 32, jumlah sumbu: 5, Quaser MV204U/10 5 sumbu ini diproduksi pada tahun 2002. Mesin ini memiliki perjalanan XYZ yang mengesankan yaitu 700 x 590 x 400 mm dan kecepatan spindel maksimum 10.000 rpm. Mesin dilengkapi dengan penukar alat otomatis dengan 32 alat dan kontrol Heidenhain iTNC530. Jika Anda mencari kemampuan pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan universal Quaser MV204U/10 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Sumbu putar: A ±110°, C 360° Lsdpfx Ajy Nbg Dsateab • Pendingin melalui spindel: 20 bar Spesifikasi Teknis Taper BT 40

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, hu Lasdpjy Snwhsfx Aateb

Kondisi: bekas, Heidelberg GTOVP52 Straight 4 atau 2 + 2 Ukuran maksimum lembar: 360 x 520 mm Ukuran minimum lembar: 105 x 180 mm Lodey Sxzwepfx Aateab Sistem pembasahan alkohol Varn 77 juta impresi Nomor Seri: 690392 Suku cadang dan manual operator untuk mesin dan sistem pembasahan Varn Berjalan dengan baik Harga: EURO 13.750, dimuat dan dikemas dalam kontainer atau di atas truk

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, daya: 8 kW (10,88 hp), tegangan masuk: 400 V, ketinggian potong (maks.): 360 mm, lebar pemotongan (maks.): 500 mm, Perlengkapan: Penandaan CE, MYYDÄÄN: PEGAS 360x500 SHI-LR – Puoliautomaattinen vannesaha ammattikäyttöön Myytävänä tehokas ja raskaan sarjan Pegas 360x500 SHI-LR vannesaha, joka on suunniteltu vaativiin metallintyöstöolosuhteisiin. Tämä kone yhdistää suuren sahauskapasiteetin ja tehokkaan puoliautomaattisen käyttöjakson. KESKEISET OMINAISUUDET • Puoliautomaattinen sykli: Leukojen säädön jälkeen kone hoitaa hydraulisen kiinnityksen, sahaamisen ja kehikon palautuksen automaattisesti käyttäjän asettamien parametrien mukaan. • Suuri kapasiteetti: Pyöröterästen sahaus jopa 360 mm asti ja suorakulmaisten profiilien max. 500 x 360 mm. • Monipuolinen kulmasahaus: Sahan varsi kääntyy molempiin suuntiin (vasen/oikea) ja mahdollistaa tarkat leikkauskulmat 45° ja 60°. • Portaattomasti säädettävä nopeus: Terän nopeus portaattomasti säädettävissä 20–100 m/min, mikä takaa optimaalisen sahausnopeuden eri materiaaleille. TEKNISET TIEDOT • Terän mitat: 4780 x 34 x 1,1 mm • Moottoriteho: 3,0 kW (kokonaisteho 7,7 kW) • Ohjaus: Hydraulinen kehyksen syöttö ja kiinnitys, manuaalinen materiaalin syöttö ja terän kiristys. • Jäähdytys ja puhdistus: Integroitu jäähdytysnesteen pumppu (0,44 kW) ja hihnakäyttöinen puhdistusharja terän käyttöiän pidentämiseksi. • Mitat: Pituus 2873 mm Leveys 1080 mm Paino 715 kg • Työpöydän korkeus: 812 mm SAHAUSKAPASITEETTI (mm) Kulma Pyöreä (D) Suorakulmainen (a x b) 0° 360 mm 500 x 360 mm 45° 360 mm 440 x 240 mm 60° 300 mm 290 x 280 mm PERUSVARUSTUS Lodpfx Aaoy Rvcpetoab • Vanneterä • Yleisimmät huoltolenkit • Käyttöohjeet sähköisessä muodossa (CD) Tämä saha on erinomainen valinta työpajoille, joissa vaaditaan luotettavaa ja tarkkaan, suurikokoiseen sahaamiseen soveltuvaa työkonetta. Rakenteeltaan kestävä ja helposti huollettava laite.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 18.500.000 h, KBA RA105PRO 5+L ALV2 FAPC ref 2967 tahun 2017 jumlah cetakan – 185 juta kapasitas maksimum – 17.000 lembar/jam CX – 1,2 mm Technotrans – Kontrol suhu unit inking Sistem pencucian BALDWIN Rol anilox 100 l/cm / 80 l/cm KBA VariDry BLUE IR/HotAir Lemari suplai udara BECKER ErgoTronic Lab ErgoTronic PSO Match ErgoTronic Quality Pass ErgoTronic ACR Lajdjytunhjpfx Aatsb LogoTronic Professional Kondisi teknis sangat baik.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 16.700 h, kecepatan spindel (maks.): 6.300 rpm, tinggi total: 2.750 mm, berat keseluruhan: 10.200 kg, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, daya motor spindle: 16.000 W, panjang produk (maks.): 6.600 mm, beban meja: 600 kg, jumlah sumbu: 5, en Laodpfxjy I Aquj Aatob

Kondisi: baru, 2250m² LOT Stone Design Decor Cladding – Regular retail price €56,600 This lot includes: 2x Pallets Toscana at 63m² each = 126m² 12x Pallets Tenerife at 55m² each = 660m² 4x Pallets Nuanciert at 48m² each = 192m² 7x Pallets Nuanciert at 24m² each = 168m² 14x Pallets Mini Euroc at 48m² each = 672m² 12x Pallets Mini Euroc at 36m² each = 432m² Cover your wall with Decor Euroc and be impressed by its striking resemblance to traditionally crafted natural stone. The Decor Euroc panels are inspired by spectacular mountains and cliffs and are suitable for both indoor and outdoor use. These panels are made from concrete and are distinguished by their robust, high-quality workmanship, making them colourfast and frost-resistant. Suitable for flat interior and exterior walls Natural appearance Reinforced concrete Product weight: 1,114 grams Product height: 13.5 cm Product length: 1 cm Product width: 28.3 cm Brand: Dekor General information Colour: Cream nuance, White Mini, Toscana, White Tenerife Line: Euroc Pieces per pack: 11 Shape: Rectangular m² per pack: 0.5 m² Tile style: Concrete imitation Laodpfx Ajtrf Rzoateb Type of tile: Stone strips Type: Tile Material: Concrete Material properties: Durable Finish: Untreated Dimensions Tile thickness: 10 mm Application Use: Walls Scope: Office, Interior, Living room, Bedroom, Kitchen Frost-resistant: Yes Technical details Glazed: NO Glossy: NO Colourfast: Yes Scratch-resistant: Yes Relief: Yes Full body: Yes Financing via our partner bank is possible. complett-konzept.leasingo.de You will find further tiles – new and used – in our shop! International shipping costs on request!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), berat keseluruhan: 1.700 kg, The LR700 is a single-shaft shredder designed for a wide range of applications. Customers appreciate its compact design and versatile uses. The powerful and wear-free swing pusher, together with the proven UNTHA cutting system, ensures reliable shredding of various types and quantities of wood. Further technical data: Motor voltage: 400 V (50Hz) Ljdpfx Aju Iva Ieatsab Extraction nozzle: 200 mm, without discharge auger Belt drive with 2-stage plug-in gearbox and elastomer damper Feed opening: 700 x 1,065 mm Hydraulics: 1.1 kW Rotor speed: 98 rpm Screen perforation: 25 mm Cutting system: Rotor Type: Smooth Number of knife rows: 1 pc. Number of cutting tools: 19 pcs. Cutting tool design: USH Rotor length: 700 mm Rotor diameter: 300 mm

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 4 h, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), berat keseluruhan: 1.000 kg, panjang total: 1.750 mm, lebar total: 1.175 mm, tinggi total: 1.640 mm, lebar kerja: 510 mm, tegangan masuk: 400 V, tinggi kabinet kontrol: 200 mm, panjang kabinet kontrol: 600 mm, lebar kabinet kontrol: 600 mm, jumlah bilah: 12, kecepatan rotasi (maks.): 100 rpm, diameter rotor: 260 mm, lebar rotor: 510 mm, perforasi ayakan: 15 mm, jenis arus masuk: AC (pendingin udara), masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, 1 Ledpey Sgpvjfx Aatsab

Kondisi: bekas, jarak tempuh: 94.380 km, daya: 62 kW (84,30 hp), pendaftaran pertama: 07/2012, jenis bahan bakar: diesel, berat kosong: 1.762 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 2.800 kg, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, bahan bakar: diesel, Emisi CO₂: 190 g/km, konsumsi bahan bakar (perkotaan): 9,4 l/100 km, konsumsi bahan bakar (luar kota): 6 l/100 km, konsumsi bahan bakar (gabungan): 7,2 l/100 km, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 3, panjang total: 4.892 mm, panjang ruang muatan: 2.501 mm, lebar ruang muat: 1.600 mm, tinggi ruang muatan: 1.300 mm, Tahun pembuatan: 2012, tinggi konstruksi: 1.970 mm, Perlengkapan: ABS, filter jelaga, kantung udara, komputer bawaan, kontrol traksi, kunci sentral, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, jarak tempuh: 101.046 km, daya: 62 kW (84,30 hp), pendaftaran pertama: 07/2012, jenis bahan bakar: diesel, berat kosong: 1.762 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 2.800 kg, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, inspeksi berikutnya (TÜV): 08/2024, bahan bakar: diesel, Emisi CO₂: 190 g/km, konsumsi bahan bakar (perkotaan): 9,4 l/100 km, konsumsi bahan bakar (luar kota): 6 l/100 km, konsumsi bahan bakar (gabungan): 7,2 l/100 km, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 3, panjang total: 4.892 mm, panjang ruang muatan: 2.501 mm, lebar ruang muat: 1.600 mm, tinggi ruang muatan: 1.300 mm, Tahun pembuatan: 2012, tinggi konstruksi: 1.970 mm, Perlengkapan: ABS, filter jelaga, kantung udara, komputer bawaan, kontrol traksi, kunci sentral, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, jarak tempuh: 160.379 km, daya: 62 kW (84,30 hp), pendaftaran pertama: 09/2011, jenis bahan bakar: diesel, berat kosong: 1.762 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 2.800 kg, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, bahan bakar: diesel, Emisi CO₂: 190 g/km, konsumsi bahan bakar (perkotaan): 9,4 l/100 km, konsumsi bahan bakar (luar kota): 6 l/100 km, konsumsi bahan bakar (gabungan): 7,2 l/100 km, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 3, panjang total: 4.892 mm, panjang ruang muatan: 2.501 mm, lebar ruang muat: 1.600 mm, tinggi ruang muatan: 1.300 mm, Tahun pembuatan: 2011, tinggi konstruksi: 1.970 mm, Perlengkapan: ABS, filter jelaga, komputer bawaan, kontrol traksi, kunci sentral, sistem immobilizer,

Kondisi: bekas, jarak tempuh: 84.859 km, daya: 62 kW (84,30 hp), pendaftaran pertama: 09/2011, jenis bahan bakar: diesel, berat kosong: 1.762 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 2.800 kg, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, bahan bakar: diesel, Emisi CO₂: 190 g/km, konsumsi bahan bakar (perkotaan): 9,4 l/100 km, konsumsi bahan bakar (luar kota): 6 l/100 km, konsumsi bahan bakar (gabungan): 7,2 l/100 km, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 3, panjang total: 4.892 mm, panjang ruang muatan: 2.500 mm, lebar ruang muat: 1.600 mm, tinggi ruang muatan: 1.300 mm, Tahun pembuatan: 2011, tinggi konstruksi: 1.970 mm, Perlengkapan: ABS, filter jelaga, kantung udara, komputer bawaan, kontrol traksi, kunci sentral, program stabilitas elektronik (ESP), sistem immobilizer,

Kondisi: bekas, jarak tempuh: 160.417 km, daya: 62 kW (84,30 hp), pendaftaran pertama: 06/2014, jenis bahan bakar: diesel, berat kosong: 1.762 kg, berat muatan maksimum: 1.038 kg, berat keseluruhan: 2.800 kg, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, inspeksi berikutnya (TÜV): 10/2024, bahan bakar: diesel, Emisi CO₂: 190 g/km, konsumsi bahan bakar (perkotaan): 9,4 l/100 km, konsumsi bahan bakar (luar kota): 6 l/100 km, konsumsi bahan bakar (gabungan): 7,2 l/100 km, warna: kuning, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 3, panjang total: 4.892 mm, panjang ruang muatan: 2.500 mm, lebar ruang muat: 1.600 mm, tinggi ruang muatan: 1.300 mm, Tahun pembuatan: 2014, tinggi konstruksi: 1.970 mm, Perlengkapan: ABS, filter jelaga, kantung udara, komputer bawaan, kontrol traksi, kunci sentral, program stabilitas elektronik (ESP), sistem immobilizer,