Beli Hurco Hurco Vmx 60 bekas (21.829)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, 1001 Bsdpfx Aoy T Hkpom Eswp

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Bwedpfx Astrhq Hem Esp Good condition

Kondisi: bekas, cnc-vertikal-bmc25m-en Bwedpfxsw Nklho Am Ejp

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, kapasitas muatan per bagian penyimpanan: 3.000 kg, panjang total: 43.500 mm, tinggi total: 3.500 mm, jarak antara tiang: 2.700 mm, tinggi rak: 3.500 mm, jumlah baris rak: 5, ruang palet: 135 palet Euro, tinggi rangka: 3.500 mm, lebar rangka: 1.100 mm, beban per pasangan rangka atap (maks.): 3.000 kg, panjang rak: 43.500 mm, panjang penyangga: 2.700 mm, 5_reihen_palettenregale Bwedpfsza R Ecjx Am Eep

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm Table clamping surface 760 x 400 mm Spindle taper SK 40 Stepless spindle speeds 80 - 8000 rpm Spindle motor 7.5 kW Spindle torque max. 142 Nm Feed rates 3.0 - 7600 mm/min Rapid traverse - longitudinal/cross/vertical 24 / 24 / 15 m/min Distance table / vertical milling spindle max. 600 mm Table load capacity 350 kg Number of tool magazine positions 24 Tool diameter (fully loaded) 80 mm Tool length max. 300 mm Tool weight max. 6.8 kg Bedovh Nbuepfx Am Eowp Control ULTIMAX SSM Total power requirement 18 kVA Machine weight approx. 4.1 t Accessories: 2 tool holders SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant system

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 405 mm, jarak gerak sumbu Z: 510 mm, berat keseluruhan: 4.000 kg, kecepatan spindel (maks.): 8.000 rpm, commande-ultimax-vmc Bodpjy T Ekbefx Am Eswp

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, steu-max5-dsm-specs Bwodpfx Amjy Du I Re Eep

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Travel distances X: 290 mm Travel distances Z: 560 mm Travel distances W: 640 mm Travel distances Y: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feeds Feed rate X: 24 m/min Feed rate Z: 30 m/min Feed rate W: 30 m/min Feed rate Y: 12 m/min Turret Turret: 12 stations Bedjy Dgfbopfx Am Ejwp Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Live Tools Live tool speed: 4,000 rpm Live tool power: 5.4 kW Live tool torque: 24 Nm Indexing time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Air connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours On-time hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool setter Transformer Cooling unit Coolant tray Fixed and driven tool holders Replacement main spindle (unregenerated) Various collet chucks size 65 Documentation (circuit diagrams, operator manual, etc.)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Alle unsere Produkte werden mit Sorgfalt hergestellt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS* • Modell: FABO HY-600 • Typ: Doppelwendel-Schneckenwäscher • Kapazität: 60 Tonnen pro Stunde • Abmessungen: 1400 x 6650 x 1800 mm • Schneckengröße: Ø 600 x 6000 mm • Drehzahl: 22 U/min Bodpfx Amey H Aize Eewp • Motor: 2 x 5,5 kW Schwerlast-Gamak • Wasserverbrauch: 55–205 m³ • Inklusive Fahrgestell, Motor und Schutzabdeckungen. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Joystick baru sebagai pengganti trackball Hurco Ultimax 4 Dijual joystick baru untuk sistem kontrol CNC Hurco dengan Ultimax 4. Joystick ini menggantikan trackball Hurco original dan sangat cocok sebagai alternatif modern dan kokoh bila trackball bermasalah atau tidak akurat. Pemasangan sangat mudah dan dapat dilakukan sendiri dalam beberapa menit. Tidak memerlukan keahlian khusus. Bsdpfx Amjy N Eppj Eowp Panduan video pemasangan tersedia secara online (kata kunci youtube: "HuStick4 - Joystick passend zu Hurco Ultimax 4").

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: B3M92212078CC, Pusat Pemesinan Vertikal CNC HURCO Tipe BMC 30/M Tahun Pembuatan: 1998 Kontrol jalur CNC Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Meja: 1010 x 400 mm Koneksi spindle: SK 40 Jarak hidung spindle – meja: 150 - 760 mm Overhang: 450 mm Kecepatan spindle: 80 hingga 8000 rpm, variabel tanpa langkah Rapid traverse: 24 m/menit Daya spindle: 7,5 kW pada 30 menit / 5,5 kW pada 100% Sambungan listrik: 400 Volt, 50 Hz - Kontrol jalur CNC Ultimax 3 (dengan pembaruan perangkat keras, misal monitor TFT) - Handwheel elektronik - Sistem pengukuran tidak langsung dengan encoder pada ball screw - Penukar alat dengan 24 posisi alat - Kabin pelindung penuh / pintu geser - Panel operasi dapat diputar - Penjepit alat pneumatik-mekanis Dimensi P x L x T: 3400 x 2400 x 2550 mm Berat sekitar 4.800 kg Bsdpfow Tdiusx Am Eewp dalam kondisi baik

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Hurco VM 1 machining center Bsdpfoi E Iacox Am Eewp Maximum spindle speed: 8,000 rpm Travels: X: 660 mm, Y: 406 mm, Z: 508 mm Spindle hours: 2,000 Full software options: DXF, thread cutting (without chuck) Various tools included, Hilma vise, tool cabinet with tools

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, Machining center Huroc BMC 64, no internal coolant supply (IKZ), chip conveyor, coolant tray, spindle taper SK 40 DIN 69871. Bwjdpfjp I Hanex Am Eop

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Hurco machining center VM 1 in very good condition X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Maximum table load: 340 kg Tool magazine with: 16 stations Tool holder: SK - A40 Spindle speeds: 10–10,000 rpm Spindle hours: Total power requirement: Boderxfxhspfx Am Eewp 7.8 kW Machine weight approx.: 3.8 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, HURCO TMX8MYS H-TS8034 Bwjdpfx Aexg D A Hem Ejp Tahun pembuatan: 2011

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 1.476 h, Fungsionalitas: berfungsi sepenuhnya, Halo, kami menjual Hurco VM 30 i Plus di sini. Perjalanan: Sumbu X: 1270 mm Sumbu Y: 510 mm Sumbu Z: 510 mm Kontrol: Max5 Koneksi spindle: SK-A40 Kecepatan spindel maks.: 12.000 rpm Berat transportasi: 4.550 kg Bedpfx Ameyhw Eae Eewp Jika berminat, silakan hubungi kami via telepon. Dijual atas nama pelanggan.

Kondisi: bekas, Tahun pembuatan: 2007, model controller: Ultimax, lebar meja: 355 mm, panjang meja: 760 mm, jumlah slot dalam magazin alat: 20, 1 Bwjdpoyxcykjfx Am Esp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Satz für robotergestütztes Laserschweißen Lieferumfang: 1 x Laserline LDM1200-60 (1320W) (Baujahr 2011) 1 x Hyfra 2-Wege-Kühler (Baujahr 2018) Bwodperfucfofx Am Ejp 1 x HIGHYAG Laserschweißkopf Die Maschine kann besichtigt werden. Sehr guter Zustand. Angeschlossen, kann vor Ort getestet werden. Versand in EU-Länder erfolgt durch uns und ist kostenfrei.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase Bwedpfx Ameym T Its Esp • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, This 3-axis Hurco VM 10i was manufactured in 2021 and features advanced options such as the MAX5 control unit with dual 19" LCD monitors, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It is equipped with a through-spindle high-pressure coolant system, integrated hydraulic tool clamping, and a chip conveyor for efficient chip management. Take advantage of this opportunity to purchase a Hurco VM 10i vertical machining center. Contact us for further information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color monitors (text + graphics) • Network interface • 2 programming software modules • Integrated self-diagnostics • Windows-based platform • Integrated hydraulic tool clamping system • Through-spindle coolant system with ICS (20 bar) • High-pressure coolant system • Spindle chiller • Chip conveyor • Full splash guard enclosure Bwodpfxox H A I Rj Am Ejp • LED work area lighting • Machine status indicator lamp • Trochoidal milling function for enhanced machining performance • Tool and workpiece measurement • Collision protection with exclusion zones • Synchronous tapping • ISNC advanced NC mode

Kondisi: bekas, Tahun pembuatan: 2010, Drehdurchmesser über Bett 0316 mm Drehlänge 340 mm Steuerung ultimax Hurco Drehdurchmesser über Bettschlitten 240 mm Schwingdurchmesser 402,5 mm Bwodpfx Asydqpiem Esp Spindeldrehzahlen - stufenlos 0- 6000 U/min- rpm Spindelbohrung 45 mm Vorschübe 0- 30 m/min Betriebsspannung 400 V Anschlußleistung 14 KW Planschlittenweg 185 mm Längsweg 340 mm Raumbedarf ca. 3,76 x 2,92 x 2,15 m Aufnahmedurchmesser VDI 20 mm Hauptantriebsmotor 11,5 kW Maschinengewicht ca. 3,2 t Mit 12- fach Revolver und Stangenlader.

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on Bodpfx Aowc Afhsm Eowp - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Jam operasional: 54.000 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, CINCINNATI PROTON 60-30G Diameter sekrup: 60 mm, L/D = 30 Zona pengumpanan beralur Output: sekitar 450 kg/jam PE Motor (penggerak DC): 163 kW Kecepatan putar sekrup: maks. 221 rpm Zona alat: 5 unit + 1 unit untuk adaptor Bsdpfx Amoyrihge Ejwp Sensor tekanan & suhu lelehan termasuk Kontrol: Cincinnati EXc Pro-NT Silinder dengan lapisan bimetal - kondisi: baik Sekrup dengan lapisan keras dan zona pengumpanan yang diperkeras - kondisi: baik Dimensi (P x L x T): 2.580 x 1.430 x 1.800 mm Berat: 2.500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 19.299 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 290 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 55 mm, diameter pembubutan di atas alas geser: 508 mm, Bidding obligates the buyer to collect the machine within the stipulated period, no later than 05/08/2025! No reserve price – guaranteed sale to the highest bidder! CNC Lathe with main and sub-spindle – unrefurbished replacement spindle included! TECHNICAL DETAILS Travel Travel X: 290 mm Travel Z: 560 mm Travel W: 640 mm Travel Y: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. turning diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feeds Feed X: 24 m/min Feed Z: 30 m/min Feed W: 30 m/min Feed Y: 12 m/min Bwjdsw A Hpdopfx Am Esp Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Indexing time: 0.16 s Sub-Spindle Sub-spindle max. speed: 6,000 rpm Sub-spindle torque: 70 Nm MACHINE DETAILS Electrical connection: 66 kVA / 95 A / 400 V Pneumatic connection: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various guide channels Chip conveyor Tool setter Transformer Coolant unit Coolant tray Static and driven tool holders Replacement main spindle (unrefurbished) Various collets (size 65) Documentation (wiring diagrams, operator’s manual, etc.) Note: The main spindle emits noise. An unrefurbished replacement spindle is included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 704-0101-809, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 510 mm, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 32, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 Bwedoxamfkspfx Am Esp X-Axis: 800 mm Y-Axis: 700 mm Z-Axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-Axis: ±30° / 110° Rapid traverse A-Axis: 16.5 m/min C-Axis: 360° Rapid traverse C-Axis: 16.5 m/min Spindle Speed range: 10 - 12,000 rpm Spindle motor: 18 kW Tooling Tool holder: SK 40 Tool positions: 32 Work Area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Required space (LxWxH): 2.700 m x 4.000 m x 3.250 m