Beli Iberica Speed 1060 bekas (33.681)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 2.480 h, jarak tempuh: 43.000 km, tinggi angkat: 20.000 mm, PLATFORM OP Vrachtwagens SOCAGE 20D Speed Bouwjaar 2021 Werkhoogte 20 m Zijdelings bereik 9 m Hefvermogen van de werkbak 225 kg Urenstand 2.480 Hfjdpfx Aeyudtcsaneg Kilometerstand 43.000 Automatische stabilisatie Automatisch sluiten van de arm Zeer compacte machine

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 9.438 h, Fungsionalitas: belum diuji, 2018 Terex TDS820 penghancur kecepatan rendah 27.500 kg, 2.000 mm Jam pemakaian: 9.438 Hodpfsyuv D Hsx Aanefg

Kondisi: baru, The AE-400 SERVO edger is designed for longitudinal edging and cutting of side boards supplied to the machine at high speeds (100-400 m/minute). Hfodjnygvropfx Aansg The machine interfaces directly with feeding and receiving conveyors for boards, operating in fully automatic mode. The machine is equipped with a board scanner from above and below. The maximum temporary output of the edger, up to 50 boards/min, can be achieved when cutting 2.5m boards to the same width without altering the saw blade spacing. Any adjustment of the edger’s components to the board’s width changes the throughput. Depending on the operational configuration, the average machine output ranges from 35-48 boards/min. Technical data: No. | Parameter | Value --- | ----- | ----- 1. Main saw spindle drive motor power: 55 kW 2. Saw spindle rotation speed: 3550 rpm 3. Saw blade diameter: 400 mm 4. Maximum cutting height: 50 mm 5. Number of saw blades: 2 to 3 pcs (2 floating saws) 6. Minimum board length: 2000 mm 7. Maximum raw material length: 6200 mm 8. Maximum number of boards after cutting 1 board: 2 pcs 9. Feed rate: 100-400 m/min Cutting into 1 board – with two saw blades (2 floating blades): - Minimum saw blade spacing (board width after cutting): 75 mm - Maximum outer blade spacing (board width after cutting): 300 mm Cutting into 2 boards – with three saw blades (2 floating blades): - Spacing of blades on fixed coupling (board width after cutting): 50-100 mm - Spacing between floating blades (board width after cutting): 50-100 mm - Minimum width for cutting into 2 boards: 2 x 50 mm - Maximum width for cutting into 2 boards: 2 x 100 mm Other machine configurations are available upon request. Machines are custom-built. We also manufacture other sawmill lines: log sorting lines, board sorting lines, board stackers, conveyors.

Kondisi: hampir baru (bekas), Collette Hochgeschwindigkeits-Knetmaschine Modell: SM200 Hodpfsd D N Rmsx Aanjfg Hochgeschwindigkeits-Knetmaschinen, 200 Liter, Edelstahlbehälter und -mischwerkzeug, nagelneue Unitronics HMI- und PLC-Steuerung.

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), BSTA 60 HL, with BBV 202/120 CE certification possible Hedjizkmtspfx Aanjfg Contact us!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, gaya penekanan: 60 t, Bestellmaschine Schnellstanzautomat BSTA 60 Retrofit / Generalüberholung Umbau auf E-Antrieb und neuer Unidor PC-Steuerung. Werkzeugeinbauraum-Verbreitung möglich. Kontaktieren Sie uns für ausführliche Angebote. Hfedpfexb D Dasx Aanog

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, gaya penekanan: 50 t, panjang langkah: 51 mm, Bruderer BSTA 50USL, - Meja 1100 mm - Mesin sedang dalam proses overhaul, dengan kontrol baru - Pengumpan opsional BBV atau Servo Hubungi kami untuk penawaran detail! Hedpfx Aowu Rraoanofg

Tahun pembuatan: 1983, Kondisi: bekas, Bruderer BSTA 50 HL with BBV 202/120 Available Delivery time upon request CE certification possible Contact us! Hfjdpfeizwrlox Aanog

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: belum diuji, Bruderer BSTA 50 H with 2x BBV 202/120 Hodpfx Asuwl Iaoanofg No CE mark, used machine Contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B control system - 750 mm table Hfsdpfewu Sy Ssx Aaneg - Adjustable stroke from 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine inspected / overhauled, in very good condition! Contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 19.269 h, Fungsionalitas: berfungsi sepenuhnya, BSTA 41 with BBV 2x 202/120+ AS120 Hfsdpouwlvdjfx Aansg Completely overhauled by Bruderer Switzerland in 2007 CE certification possible Contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang langkah: 38 mm, tegangan masuk: 400 V, gaya punching: 25 t, Bruderer BSTA 25USL with BBV 190/85 - Table size: 750 mm - Adjustable stroke: 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine tested / reconditioned, excellent condition! Hfsdpowu Rubsfx Aansg Contact us!

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: belum diuji, gaya penekanan: 20 t, panjang langkah: 51 mm, berat keseluruhan: 3.600 kg, BSTA 200E mesin stamping otomatis, tahun pembuatan 1991/2000, sudah direkondisi, feeder BBV 101/75 kanan, langkah dapat diatur 8 hingga 51 mm, gaya tekan nominal 20 t, lebar pemasangan alat maksimum 420 mm. Hubungi kami untuk informasi lebih lanjut! Hjdpfx Asw S Hagjanofg

Kondisi: baru, Tahun pembuatan: 2025, en-GB_Timbermax6-23GH_HighSpeed_2024 Hodpfx Aasv A Hqponofg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3630 x 1790 x 1760 mm Weight: 4300 kg Total Power Requirement: 42.6 kW Four-Sided Planer / Moulder TIMBERMAX 5-20 High-Speed - Planing width: 20 - 200 mm - Planing height: 8 - 125 mm - Grooved bed - Minimum workpiece length: 590 mm (single) / 150 mm (series) - 5 spindles - Spindle diameter: 40 mm - Speed: 8000 rpm - Feed speed, stepless: 10 - 60 m/min - Bottom planing shaft, max. tool diameter: 125 mm - Right vertical spindle, max. tool diameter: 100 - 180 mm - Left vertical spindle, max. tool diameter: 100 - 180 mm - Upper horizontal spindle, max. tool diameter: 100 - 180 mm - Second lower horizontal spindle, max. tool diameter: 100 - 180 mm Hfedpfx Aov A Hpfoansg Spindle sequence: 1. Bottom: 5.5 kW 2. Right vertical: 5.5 kW 3. Left vertical: 5.5 kW 4. Top: 7.5 kW 5. Second bottom: 5.5 kW - Feed motor: 7.5 kW - Height adjustment motor: 0.75 kW - Conveyor belt motor: 0.75 kW - Total power: 42.6 kW - Compressed air connection max. 6 bar - Extraction port: 5 x 120 mm - Dimensions: L=3630, W=1790, H=1760 mm - Weight: 4300 kg Included features: - Hard chrome-plated tables - CE standard, TÜV Rheinland certification - Motor-driven rollers in the table - Pneumatic pressure for feed rollers - Feed system with cardan drive - Lubrication pump OPTIONAL: Automatic feeding system with conveyor belt for finger-jointed timber, wood thickness 20-100 mm - Wood width: 20-100 mm - Wood length: 150-450 mm - Speed of centrifugal disc: 45 rpm - Centrifugal diameter: 2100 mm - Total motor power: 3.69 kW - Main spindle motor: 2.2 kW - Separator motor: 0.37 kW - Wood sanding motor: 0.37 kW - Feed motor: 0.75 kW - Conveyor unit size: 3000 x 220 mm - Weight: 1580 kg

Kondisi: bekas, Tahun pembuatan: 1989, Druckkraft 20 t Gesamtleistungsaufnahme 20 kW Hjdpfxevr Hkze Aanefg Maschinengewicht ca. 5 t Die Unterlagen zu dieser Maschine sind nicht vollständig vorhanden; Elektropläne liegen bei. Die Anlage war bis zuletzt in Betrieb. Wir verkaufen die Maschine als Ersatzteilträger, unter Ausschluss jeglicher Gewährleistung und Rücknahme, frei verladen LKW mit Kran in Soingen.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Hfedpeyhdvkjfx Aanog Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Hjdpju Aa I Sjfx Aanefg Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp Hsdpfxou Dg D Ao Aanofg • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Hfodpsrmkfnjfx Aanog Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Hfodpfxevv Spks Aaneg Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang meja: 1.200 mm, lebar meja: 500 mm, penjepit spindle: MK 3, jenis penyesuaian ketinggian: listrik, Donau DR23 Mesin Bor Radial – Mesin Berkualitas Kokoh Hedpfeyrtkxex Aansfg Dijual mesin bor radial Donau DR23 yang andal, ideal untuk bengkel, konstruksi logam, atau aplikasi industri. Mesin ini menonjol dengan konstruksi yang kokoh, presisi tinggi, serta kemampuan penggunaan yang fleksibel untuk pengeboran, chamfering, dan pemotongan ulir. Rincian: Pabrikan: Donau Model: DR23 Mesin bor radial direkondisi oleh Vaumtec Chuck cepat tukar Konstruksi dari cor yang stabil Lengan penyangga dapat disesuaikan untuk pengerjaan fleksibel pada benda kerja berukuran besar Cocok untuk baja, aluminium, dan logam lainnya Putaran kanan-kiri

Kondisi: bekas, Tahun pembuatan: 1985, Technical Details: Punching force: 40 kN Required air pressure: 8 bar Hjdpfx Asu Icwgoansfg Adjustable ram stroke min. / max.: 6 - 50 mm Ram adjustment: 50 mm Stroke rate: 70 - 400 strokes/min Table size (LxW): 480 x 445 mm Table cut-out (LxW): 250 x 112 mm Overrun time: 80 ms at 450 rpm Ram clamping surface (LxW): 420 x 345 mm Ram bore: Ø 40 x 230 mm Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Total power requirement: approx. 19 kVA (approx. 7.5 kW) Control cabinet weight: 0.3 t Machine weight approx.: 4000 kg 40t punching press without roller feed/strip line Operation via control panel/two-hand control Modes: manual / automatic

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gores kuas bulu: 190 mm, kecepatan spindel (min.): 41 rpm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 1.920 kg, berat benda kerja (maks.): 17 kg, ketebalan pelat baja (maks.): 32 mm, torsi: 250 Nm, tinggi meja: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve the table frame) Technical Data: Drilling capacity in solid material: St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Worktable height: mm 900 Hjdpfx Asrn Riqsanofg Quill stroke: mm 190 Column travel: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the middle of the working surface

Kondisi: bekas, Tahun pembuatan: 2021, nomor mesin/kendaraan: A2536805, gaya penekanan: 40 t, Hidralmac single-column press – 40 t forging press – stroke 250 mm For sale is a hydraulic single-column press (C-frame press) from the manufacturer Hidralmac with a press force of 40 t. The machine is designed for forging, forming, and bending operations and can be custom-built to individual customer requirements. Thanks to adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup work and automated processes. ===== Technical Data & Information: Hydraulic single-column press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: Single-column press / forging press - Design: C-frame press - Press force: 40 t - Build time: approx. 3 months after receipt of payment ==== Working Area - Maximum daylight: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table plate: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table opening: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode speed: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW - Oil tank: 200 l - Return force: 6.3 t Hsdpfjfxyhfex Aansfg ==== Controls & Features - Positioning accuracy: ± 0.5 mm - Adjustable dwell time: 0–10 s (in 0.1 s increments) - Pressing pressure adjustable via control panel - Switching between manual and automatic mode via key switch - Two-hand control for safe operation - Sensor-based position control (top dead center, bottom dead center, switching point) ==== Operating Modes - Manual setup operation with stop at any time - Bending mode via two-hand control - Automatic mode for closed tools - Optionally usable for punching, piercing, and bending ===== Forging operations, forming technology, bending processes, punching, piercing operations, small batch production, toolmaking Single-column press, C-frame press, forging press, hydraulic press, industrial press, bending press, die tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our core competency is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.