Beli Mass International Ctm bekas (9.861)

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Laodot Dwb Djpfx Aptjc Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 spindle speeds 180 - 1120 rpm Console version with height-adjustable head with or without ROMAI multi-spindle head Laodpfx Apey Hf Akotec

Kondisi: baru, en_Eurotec Innovation RT27 – Rotary Dryer / Drying System (Made in Germany) Machine Type: Rotary Dryer Manufacturer: Eurotec Innovation GmbH Model: RT27 The RT27 rotary dryer from Eurotec Innovation is a powerful and efficient solution for component drying after vibratory finishing. Utilizing drying granulate and direct heating, workpieces are dried quickly, gently, and without stains. This system enables not only drying but also simultaneous repolishing of components—for optimal surface quality in a single process step. 🔧 Technical Data: Gross volume: approx. 270 liters Usable volume: approx. 140 liters Drive power: approx. 1.6 kW Heating power: max. 4 kW Connection: 400V – 16A – 50 Hz Advantages: ✔ Fast and economical component drying ✔ Spot-free surfaces after vibratory finishing ✔ Drying and polishing in one operation ✔ Integrated screening section for automatic workpiece separation ✔ Switchable between batch and continuous operation ✔ Spiral rising container floor for gentle processing ✔ Expandable with extraction, noise protection, and automation 🏭 Areas of Application: Component drying directly after vibratory finishing Polishing and post-processing Reduction of stains and water spots Protection against flash rust through complete drying Processing of complex geometries The RT27 is the ideal complement to vibratory finishing systems and ensures an efficient, safe, and reproducible drying process—perfect for industrial applications. Other variants and special designs available on request. From development to production, we supply all products from a single source—everything "Made in Germany." Lajdpfx Apef Sqfbotjc ----- Please feel free to contact us. We are happy to provide non-binding advice. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, fax, telephone, messaging portal), during which we will first provide you with a non-binding offer that also informs you of our general terms and conditions and right of withdrawal with imprint before a purchase/contract is concluded.

Kondisi: baru, en-TV73 Trough Vibrator – Powerful Vibratory Finishing System for Deburring, Polishing & Surface Treatment | Made in Germany Machine Type: Trough Vibrator TV73 Shown: TV73 incl. Acoustic Enclosure Manufacturer: Eurotec Innovation GmbH The TV73 Trough Vibrator from Eurotec Innovation is a powerful all-round solution for industrial surface processing. Its robust construction, high efficiency, and versatile application options make it ideal for a wide range of uses in the metalworking and manufacturing industries. The perfect choice for companies looking to optimize processes and achieve lasting improvements in surface quality. ⚙️ Technical Specifications Machine Type: Trough Vibrator / Vibratory Finishing System Manufacturer: Eurotec Innovation GmbH Model: TV73 Nominal Speed: approx. 1,500 rpm Gross Volume: approx. 470 liters Internal Tank Dimensions: Length: approx. 1,100 mm Width: approx. 680 mm Height: approx. 700 mm Connection: 400V / 16A / 50Hz Your Advantages at a Glance: ✔ Universally applicable for a variety of workpieces and materials ✔ High efficiency thanks to a powerful vibration motor mounted beneath the working tank ✔ Capable of processing large workpieces due to U-shaped work tank ✔ Robust, low-maintenance design for reliable continuous operation ✔ Quick media change & draining via a generously sized drain outlet ✔ Reduced part adhesion due to integrated stripper edge ✔ Rubber-damped feet minimize vibration transmission ✔ Optional acoustic enclosure & upgrades available 🏭 Typical Applications: Deburring, smoothing, and polishing of components Descaling, derusting, and cleaning Laodeh Ukxlspfx Aptoc Edge rounding Surface finishing of a wide range of materials Features & Options: U-shaped work tank for maximum flexibility Vibration motor (mounted directly beneath the tank) Fittings for transport by pallet truck or forklift Quick-change drain screen (polyurethane) Options: Acoustic hood / enclosure Workpiece separation Frequency control / PLC automation Dosing systems & automation The TV Series stands for excellent value for money and the highest quality standards. All systems are engineered and manufactured to the strictest requirements – 100% Made in Germany. The images show the system including optional accessories. ----- We are happy to provide individual advice and a non-binding quotation – just contact us! ----- The European Commission provides a platform for online dispute resolution (ODR). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer that includes our General Terms and Conditions, revocation rights, and legal notice before any purchase or contract is finalized.

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), d2020_innenrundschleif_vo Ljdpfsy E S Hmsx Aptjac

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kedalaman penggilingan: 210 mm, tinggi pusat: 510 mm, kecepatan spindel (min.): 9.000 rpm, kecepatan spindel (maks.): 15.000 rpm, panjang penggilingan: 1.800 mm, kecepatan rotasi (maks.): 15.000 rpm, kecepatan rotasi (min.): 9.000 rpm, spindel-drehzahlen-technische-daten Laodpfx Ajyg Hdueptoc

Kondisi: bekas, 1 Ledpfx Apeyxnuasteac

Kondisi: baik (bekas), LOCHDURCHMESSER: 1–100 mm LOCHTIEFE: 230–350 mm WERKSTÜCKDURCHMESSER: 360–500 mm WERKSTÜCKLÄNGE: 850–1000 mm WERKSTÜCKKOPF-NEIGUNG: 15° WERKSTÜCKGEWICHT: kg SCHLEIFSCHEIBENDREHZAHL: 18.000–24.000 U/min WERKSTÜCKSPINDEL-DREHZAHL: 140–1.120 U/min LEISTUNG: kW Lasdpfx Apjwf Hgbotsc GEWICHT: 4,5 t

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis alat: VDI 40, berat keseluruhan: 10 kg, VDI40 collet holder, retractable, with ER50 collets – 10 pieces - Extremely compact design for threads with critical length (length compensation) - Precise thread length control thanks to disengagement clutch - Single head for internal and external threads - Integrated coolant supply (coolant supply through the center available on request) - Available with - ANGST Flex or ESX (ER) collets Lajdpoxltzvsfx Aptsc - Sizes 1, 2, 3, 4, and 6 - All common shanks, e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 - Robust and durable Swiss quality products PAFIX CNC Thread Cutting Head for CNC Machines - The PAFIX CNC head is specifically designed for all machines with programmable forward and reverse movement to the toolholder (turret, spindle, etc.). - It is extremely compact and equipped with a positive-locking disengagement clutch, which can be set to three different extension lengths as needed. - The head can be set to two different programmed thread cutting cycles. Both cycles ensure a certain amount of pitch compensation (float). - To ensure error-free thread cutting with a precise starting point and thread depth or length, no spring-loaded pitch adjustment or overload slip clutch is used. - The PAFIX CNC enables quick changeover from thread cutting head to cutting head. Simply unscrew the clamping nut and replace it with the cutting head housing. Available with or without collets. The listed price is without ER50 collets. Collet set available on request.

Tahun pembuatan: 1985, Kondisi: bekas, Maximum workpiece area: 400 x 300 mm Lsdpfx Aob Nxdveptsac Continuously adjustable cutter spindle speed: 1,600 - 6,000 rpm Electrical connection: Three-phase 380 V Required space: 900 x 800 x 600 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AFMAAAABABAA+, Mass flow meter Coriolis Proline Promass 83F, manufactured by Promass in 2011, is a precision device designed for accurate mass flow measurement in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, suitable for applications requiring sanitary standards such as dairy processing. Constructed from high-quality stainless steel 1.4404/316L and 1.4539/904L, the instrument offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and can operate within a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter housing has an IP67 and NEMA/Type 4X protection rating, ensuring resistance to dust and immersion in water. Lsdpoy Anhzefx Aptjac The sensor calibration includes a K factor of 1.6287 / 51 and density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards with a roughness of 0.8 µm (150 grit). The device is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at 50-60 Hz. The housing shows some signs of surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is fitted with braided cables with yellow markings and black cable ties. There is some dust accumulation on the flowmeter body, indicating previous use. This Promass 83F flowmeter is suitable for precise mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, weber-innenruettler-ivur-50-2025 Laedpoy A Hcqefx Aptec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Mesin penjungkit untuk bak massal di atas rel – Sistem pemuatan krat palet ke drum di atas rel Merek: Inox Meccanica s.r.l. Model: ELEVATORI PER CONTENITORI Nomor seri: 2853 Tahun pembuatan: 2018 Daya: 5,5 kW Tegangan: 400 V, 50 Hz Laodpowa Dtbofx Aptoc Berat: 1800 kg Dimensi maksimum krat palet: 1200 mm x 1000 mm x 800 mm Tinggi pengangkatan: 3600 mm Kapasitas angkat maksimum: 600 kg Dimensi keseluruhan sistem pemuatan: 3400 mm x 2200 mm x 4000 mm Panjang rel: 17.500 mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-001 Lasdpfsyzkifex Aptjc

Tahun pembuatan: 1981, Kondisi: baik (bekas), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Ledohad Avspfx Aptoac Operation: Internal gear honing

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Ljdpfxjcdtplj Aptjac Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Lajdpfx Apsui Sbetec Max. tool diameter: approx. 50 mm Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Ljdpfx Ae Rwa Ueptjac Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Ledpfsdbmgmox Apteac Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: Lodsdcdrpspfx Apteac • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Lodpfxedffzfs Apteac Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Lsdpfx Aeda Ugispteac

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Laedpfx Aegyd T Ejptsc Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Laedjt Dv I Aopfx Aptsc Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Lajdjgyd Svepfx Aptjc Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.