Beli New Europa Mesin Bubut Tengah bekas (86.469)

Kondisi: bekas, de Ljdpfswmlcksx Aa Usrl

Kondisi: bekas, Tahun pembuatan: 2022, Optimum Optiturn TH5620V - Lathe with DPA and SWH Used, with signs of wear - Hardened and ground Z-axis guideway - Camlock spindle mount DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide swiveling range ± 90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Gearwheels smoothly running, hardened, and ground, mounted in 2 adjustable precision tapered roller bearings - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life cycle calculation, tested according to EN ISO 13849 - Bed carriage right-/left-hand operation via changeover shaft - Central lubrication on bed carriage - Leadscrew cover - Emergency stop push button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling: 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Strongly ribbed prism bed, inductively hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator, and oil separator; easy and complete drainage and cleaning to DIN standard - LED machine lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity: Ø 105 mm - Siemens Sinamics frequency converter / Safety Integrated - Energy chain for gentle cable and hose routing - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for 25 mm square tool bits - Digital Position Display DPA 21 - Glass linear scales Dimensions and Weights: Lrjdpfjx Dzxaox Aa Uel Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges: Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data: Output power (motor power): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump power: 125 W Standards and Approvals: Standard: DIN EN 55011 Tailstock: Taper: MT 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder height: 25 mm Spindle taper: Ø 113 mm (taper 1:20) Threading: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Travel: Top slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements Lrjdpfx Aoqwipnsa Uel - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 Lredpfx Aaowhzcps Uel FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Lrjdpsx E Um Nsfx Aa Uol

Kondisi: bekas, nomor mesin/kendaraan: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Ledpfxouqb Emo Aa Uorl Spindle bore: 36 mm Spindle speeds: 42-2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Lredpfx Aajvrcqdj Uel Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Lrsdovrckqspfx Aa Usl Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm Lrodpfx Aaev Tyzco Ujl >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: Ljdovv Etvspfx Aa Ujrl >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard Lrsdpfx Aaovrdlce Usl >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Ljdpfxowrm Dto Aa Usrl >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself. Lodpfswthbijx Aa Ujrl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop Lodpfxswag Stj Aa Ujrl About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LZ280/3, diameter putar di atas sled silang: 190 mm, lubang spindel: 43 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 670 mm, gores kuas bulu: 90 mm, diameter quill: 45 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful geared-head lathe with a continuously variable spindle speed range from 30 to 4,000 rpm. The standard paint finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Ljdpjv Dan Djfx Aa Uerl Features & Accessories: ✅ 3-axis position display with 6'' color screen ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine lamp & K32 collet board ✅ Electromechanical end-stop system for threading/feeds ✅ Tool cabinet with telescopic pull-outs including operating tools Additional equipment package (optional): ➕ 3-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3–16 mm, B16/MK3) ➕ Live center MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport incl. insurance Perfect for precise and demanding turning applications in industry and workshops! 🚀

Kondisi: sangat baik (bekas), Universal-Drehmaschine Harrison M250 Die Maschine befindet sich in sehr gutem Zustand und wurde nicht in der Produktion eingesetzt. Lrjdpfx Aou R Udwja Uel Sie diente als Hilfsmaschine in der Instandhaltungsabteilung einer Druckerei. Technische Daten: • Umlaufdurchmesser über Bett: 280 mm • Umlaufdurchmesser über Support: 170 mm • Spitzenweite: 680 mm • Drehzahlbereich: 40 – 1.500 U/min, 9 Stufen • Spindelbohrung: 35 mm • Reitstockkegel MK: 3 • Pinolenhub Reitstock: 95 mm • Gesamtanschlusswert: 1,5 kW • Maschinengewicht ca.: 410 kg • Abmessungen L x B x H: 1,6 x 0,8 x 1,4 m Die Maschine ist mit einer digitalen Positionsanzeige Insize ISL-DR2 ausgestattet.

Kondisi: baik (bekas), 1 mesin bubut dengan poros utama dan poros ulir bekas, merek Weiler, tipe Condor VS 2 Data teknis: Tinggi senter: 160 mm Jarak antara senter: 800 mm Lubang spindle: 40 mm Lebar alas: 240 mm Putaran spindle: 12 - 2800 rpm Daya motor: 3 kW Kepala tailstock: MK 3 Jarak gerak pinol: 110 mm Feeding: 0,037 - 1,253 mm/putaran Bobot sekitar 800 kg Dimensi (PxLxT) sekitar 1930 x 880 x 1470 mm Ledpfx Aaew Rcrco Uerl Perlengkapan: Chuck tiga rahang Sistem pemegang cepat Multifix

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Lsdpfxsw I A Uxj Aa Usrl Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €109,100 Lease rate: €2,061.99 Swing diameter over bed: 890 mm Distance between centers: 3,000 mm Center height: 400 mm Spindle bore: 155 mm Swing diameter over cross slide: 490 mm Bed width: 700 mm Spindle mount / DIN55027: size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feed rates: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Inch thread range: 60 - 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill stroke: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive: via gearbox 3-axis digital readout Fagor Lrodpfewirxqjx Aa Uol Quick-change toolpost Amestra, Multifix-type system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip splash guard along the full length Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Reducing sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine light Operating manual Equipment according to “CE” OTHER TURNING LENGTHS: Turning length 1,500 mm €94,720.00 Turning length 2,000 mm €98,220.00 Turning length 4,000 mm €117,110.00 Turning length 5,000 mm €128,100.00 Turning length 6,000 mm €144,630.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €53,750 Lease rate: €1,015.88 Swing diameter over bed: 6 mm Distance between centers: 2,000 mm Center height: 315 mm Spindle bore: 103 mm Swing diameter over cross slide: 4 mm Bed width: 400 mm Spindle mount / DIN 55027: Size 11 Spindle taper: 120 M Number of spindle speed steps: 21 Spindle speed: 12.5 - 1,250 rpm Ledpfxswirv Aj Aa Uerl Number of feeds: 120 Longitudinal feed: 0.04 - 12 mm/rev Cross feed: 0.02 - 6 mm/rev Metric threads range: 0.5 - 120 mm Inch threads range: 60 - 1/4 TPI Module threads range: — DP threads range: 240 - 1 Cross slide travel: 315 mm Top slide travel: 90 mm Tailstock quill diameter: 90 mm Tailstock taper: MT 5 Tailstock quill stroke: 2 mm Motor power: 11 kW Weight: 3,310 kg Drive via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra, Multifix type system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm Fixed center Longitudinal stop for one position Coolant system Full-length rear chip splash guard Lead and feed screw cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick clamp Low-voltage machine light Operating manual Equipment in accordance with “CE” ADDITIONAL TURNING LENGTHS: Turning length 1,000 mm €50,880.00 Turning length 1,500 mm €51,960.00 Turning length 3,000 mm €58,400.00 Turning length 4,000 mm €63,790.00 Turning length 5,000 mm €78,860.00

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €44,400 Lease rate: €848.04 Swing over bed: 500 mm Centre distance: 1,500 mm Centre height: 250 mm Spindle bore: 80 mm Swing over cross slide: 0 mm Bed width: 400 mm Spindle mount / DIN55027: Size 8 Spindle taper: 80 M Lrjdpfjwiq Rfox Aa Usl Number of spindle speed steps: 21 Spindle speed: 20–2,000 rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Number of threads: 64 Metric thread range: 0.5 – 120 mm Inch thread range: 60 – 1/4" TPI Module thread range: DP thread range: 240 – 1 Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: MT 5 Tailstock quill stroke: 2 mm Motor power: 7.5 kW Length: 3,100 mm Width: 1,250 mm Height: 1,400 mm Weight: 2,820 kg Drive via geared transmission 3-axis digital readout Fagor Quick-change toolpost Amestra, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm Fixed centre Longitudinal stop for one position Coolant device Rear chip guard over entire length Leadscrew and feed shaft guard Chuck guard Toolpost guard Levelling bolts and pads Tailstock with quick-clamping Low voltage machine lamp Operating manual Equipment in accordance with "CE" OTHER TURNING LENGTHS: Turning length 1,000 mm €43,420.00 Turning length 2,000 mm €46,190.00 Turning length 3,000 mm €50,840.00 Turning length 4,000 mm €56,200.00 Turning length 5,000 mm €71,400.00

Kondisi: baru, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing diameter over bed: 800 mm Distance between centers: 2000 mm Center height: 400 mm Spindle bore: 260 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 – 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Ljdpfxjwirghs Aa Uerl Number of threads: 76 Metric thread range: 0.5 – 0 mm Inch thread range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,000 kg Main application of this type of lathe is connected to pipe machining. Accordingly, this machine type is widely used in the oil industry. The pipe-threading lathes offer extensive capabilities for cutting thread connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping of pipes using two chucks and the supplied rests enables machining of pipes with long lengths. Suitable for manufacturing and maintenance of components and equipment for the oil and transmission industries. • Transmission via gear drive • Electrodynamic brake • 3-axis digital readout Fagor • Quick-change tool post Amestra Type C, Multifix system incl. 4 holders (3x rectangular, 1 round) • 2 pcs. 3-jaw chucks Bison 3295, Ø500 mm, on both sides of the spindle, clamping range 120 – 350 mm (Option: special hard outside jaws, clamping range 120 – 500 mm) • 2 pcs. steadies on stands, Ø60 – 260 mm, with rollers • Rapid traverses (4) • Longitudinal stop for one position • Taper turning attachment • Coolant system • Rear chip splash guard along the full length • Leadscrew and feed shaft cover • Chuck guard • Tool holder guard • Levelling bolts and plates • Tailstock • Reducing sleeve for tailstock quill • Mechanical tailstock movement with handwheel • Low-voltage machine lamp • Operating manual • Equipment in accordance with CE Additional models available upon request with spindle bores from 5 to 358 mm, center distances from 1000 to 6000 mm and swing diameters from 730 to 1020 mm.

Kondisi: baru, Condition: new Lead time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing diameter over bed: 800 mm Distance between centers: 2,000 mm Center height: 400 mm Spindle bore: 3 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 – 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 – 0 mm Inch thread range: 60 – 1/5 tpi Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill stroke: 225 mm Motor power: 11 kW Ljdpfx Aaswiq E Ae Uerl Weight: 6,100 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes offer extensive capabilities for threading cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping the pipes with two chucks and the included steady rests allows for machining pipes of significant length. Suitable both for constructing components and installations for the oil and transmission industries, as well as for maintaining such installations. Drivetrain via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra Type C, based on Multifix system incl. 4 tool holders (3x rectangular, 1x round) 2 pcs. 3-jaw chucks Bison 3295 Dm. 500 mm at both ends of the spindle 2 pcs. steady rests on stands Dm. 120 – 320 mm with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning attachment Coolant system Rear chip splash guard over full length Leadscrew and feed shaft guard Chuck guard Tool post guard Levelling bolts and pads Tailstock Reducing sleeve for tailstock quill Mechanical movement of tailstock with handwheel Low-voltage machine lamp Operating manual Equipment in accordance with "CE" Further models with spindle bore from 5 to 358 mm, center distances from 1,000 to 6,000 mm, and swing diameters from 730 to 1,020 mm available on request.

Kondisi: baru, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €131,720 Leasing rate: €2,489.51 Swing over bed: 1,020 mm Distance between centers: 2,000 mm Center height: 510 mm Spindle bore: 358 mm Swing over cross slide: 770 mm Bed width: 560 mm Lodpfx Aaewiq Drj Uorl Spindle taper: 361 M Number of spindle speeds: 12 Spindle speed range: 6.3 – 3,100 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread pitch range: 0.5 – 0 mm Inch thread pitch range: 60 – 1/5 TPI Module thread pitch: 0.125 – 37.5 DP thread pitch: 240 – 4/5 Cross slide travel: 505 mm Top slide travel: 270 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill stroke: 225 mm Motor power: 18.5 kW Weight: 6,400 kg The main application of this type of lathe is the machining of pipes. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes offer extensive capability for machining threaded connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping the pipes with two chucks and the supplied steadies allows the handling of long pipes. Suitable both for the assembly of components and systems for the oil and pipeline industries as well as for maintenance of such equipment. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change toolpost Amestra type D1, system as Multifix incl. 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chucks Bison 3295, diameter 660 mm, on both ends of the spindle Max. 250 rpm, clamping range 5 – 400 mm (Option: special hard external jaws, clamping range 80 – 400 mm) 2 pcs. steady rests on pedestals, diameter 160 – 360 mm, with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning device Coolant system Rear splash guard along the entire length Leader and feed screw cover Chuck guard Tool post guard Leveling bolts and plates Tailstock Reducing sleeve for the tailstock quill Mechanical movement of the tailstock via handwheel Low-voltage machine lamp Operating manual Equipment according to CE standards Other models available upon request: spindle bores from 5 to 358 mm, distances between centers from 1,000 to 6,000 mm, and swing diameters from 730 to 1,020 mm.

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Centre distance: 3000 mm Centre height: 430 mm Spindle bore: 132 mm Swing over cross-slide: 620 mm Bed width: 560 mm Spindle mount / DIN 55027: Size 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed: 7.5 – 1,015 rpm Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: DP thread range: 240 – 2/3 Cross-slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 15 kW Length: 3,470 mm Width: 1,700 mm Height: 1,730 mm Weight: 4,650 kg Drive via gearbox 3-axis digital display Fagor Quick-change toolpost Amestra, Multifix-style system including 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3295/DIN 6350, 400 mm Fixed centre Rapid traverses (4) Foot brake Longitudinal stop for one position Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Toolholder guard Ljdpfewiq Rxex Aa Usrl Levelling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine light Operating manual Equipment as per "CE" standard OTHER TURNING LENGTHS: Turning length 1,500 mm €68,870.00 Turning length 2,000 mm €71,780.00 Turning length 4,000 mm €88,640.00 Turning length 5,000 mm €101,200.00 Turning length 6,000 mm €114,800.00