Beli Pvd-Installasi Dari Impact Coating bekas (3.710)

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Fpodpsfz A Ilsfx Ap Hsi The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Fpjdpfxsfz U Nbe Ap Hoi Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. Fedpfjfzktzex Ap Hepi From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney Fodpfxsfzb Rce Ap Hspi - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Fpedofz Dt Nepfx Ap Hei Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. Fpjdpfx Asfz I D Dep Hoi The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Fedofz I Edopfx Ap Hspi Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning Fpodpfefz I Ehjx Ap Hji The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency Fsdoflk Awjpfx Ap Hepi - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Fpsdpfx Apsflmdwj Hei - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Fsdpfsfz A Iwox Ap Hjpi Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Fsdpfofzccnsx Ap Hopi Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Fpjdpfxefzkrno Ap Hji Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. Fpjdpfefz Nb Tsx Ap Hji By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Fedpfx Apofz U S Ee Hepi This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Fpodefz U Tijpfx Ap Hei Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. Fpodpfx Apefzciqs Hsi The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) Fpodpfx Aefzkqmep Hoi The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. Fpodeyg H Dhjpfx Ap Hoi MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 1989, Kondisi: siap digunakan (bekas), Process: nickel strike, alkaline/cyanide zinc, base material: steel, stainless steel, carrier throughput: approx. 11/h, production time: operating time minus carrier cycle time, drums per carrier: 1, drum internal length: 870 mm, spanner width: 350 mm, average load weight per drum: approx. 37 kg, max. load weight per drum: approx. 50 kg, load weight depends on the geometric surface area of the parts, anode spacing: 650 mm (700 mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heat-up time: approx. 5h from an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, mains water: 2 bar, circulation water: 2 bar, compressed air: 8 bar, drive/control power: approx. 166 kVA, rectifier power: approx. 240 kVA, heating power: approx. 136 kW, extracted air volume: cyan./alk. 12,000 m³/h, acid/alk. 19,450 m³/h, heat to be dissipated: approx. 80,000 kcal/h, the system has been drained of all substances, transformers are free of hazardous materials, full documentation available. Inspection on site is possible. Fodpsy T N Iqsfx Ap Hspi

Kondisi: bekas, Tahun pembuatan: 2018, en Fedey Tn Atspfx Ap Hopi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar kertas (min.): 2.100 mm, tinggi kertas (maks.): 120 mm, panjang total: 3.300 mm, lebar total: 3.500 mm, tinggi total: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid sealing of digitally printed media. Suitable for the application of primers or protective coatings, as well as for full-surface finishing of digitally printed media in continuous operation using solvent-free UV coatings and direct curing by means of UV radiation from above. Condition: As new (purchased in 2023) Availability: Immediately Short description: For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was purchased new in 2023 via Welte and has only been used for a few operating hours since then. It is in excellent visual and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with exhaust system, as well as a second roller (smooth roller). Technical Data & Highlights: - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Feed speed: Infinitely variable (up to 25 m/min) Fodpfjy Szwuox Ap Hopi - Drying: Includes high-performance UV drying unit (TRUV) for immediate downstream processing - Control: Modern control panel for precise process management Price: €150,000 (negotiable) plus VAT | ex location (EXW) Contact & Viewing: The system is still assembled and can be viewed and tested under power by appointment. (Location: St. Martin bei Lofer, Austria)

Tahun pembuatan: 2014, Kondisi: bekas, Gebrauchte Pulverbeschichtungsanlage. Außer Betrieb genommen in 2024. - Container-Mischer Mixaco, Typ CM1000-MT, mit 4 x Edelstahl-Behälter, 800 Ltr, Baujahr 2014 - Extruder Coperion, ZSK 43 MV, Baujahr 2014 - SBS Kühlförderband, 800 mm breit x 5.000 mm lang - Mühle Hosokawa Alpine, Typ ACM40 EC CL, Baujahr 2014 - Dosiergerät Gericke, Typ GL D 7, Baujahr 2014 - Zuführeinheit Hosokawa, Baujahr 2014 - Druckfilter Hosokawa Alpine, Baujahr 2014 Fodsvxrm Uopfx Ap Hopi - Edelstahlyklon, Durchmesser: 500 mm - 2x Rotationssieb AZO, Typ E 240 - Taschenfilter mit 45 kW Elektroantrieb - Kältemaschine Climaveneta, Typ NX/K 0914P - Kältemaschine Climaveneta, Typ NX/K 0552P

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, BMB coating system for printed circuit boards, model TUA-200 / 2, in TOP condition. Purchased: 2023 (as new condition) and used for only 6 months. Configuration: Professional version (excellent features) - High-speed coating up to 4x faster - 3 coating processes in one system - Suitable for components up to 1200x570mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with lacquer - (Digital work documentation system, pending) - Large lacquer tank volume for tall components - Lacquer consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM system (equipment pending clarification), you can track at any time which component was produced when, where, by whom, and how. Requirements according to ISO/TS 16949 are met. When changing a tool, the PDM system automatically detects all necessary coating parameters. Work instructions, videos, technical data sheets, processing notes, etc.—everything in its place! - 19'' swiveling smart touch panel - Viscosity control - Tool monitoring: automatic detection and adjustment - Electrically adjustable machine height Coating processes supported: - Dip coating (DipCoat) - Selective-Contact-Coating (SCC®) - Selective-Transfer-Coating (STC®) The system can be shipped by freight carrier upon arrangement. Fodpfxjv I Tb Ee Ap Hepi #8300

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW Fedpexna U Usfx Ap Hspi - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.