Beli Spindel Penggilingan Berkinerja Tinggi bekas (16.080)

Kondisi: bekas, Tahun pembuatan: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel Z-axis, flat: approx. 500 mm Cross slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-axis: longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-axis: cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Ncodpfx Asu Tq U Iea Ust Face plate Ø 1000 mm 4-way toolpost Steady rest Ø 250 closed Accessories: Four-jaw chuck Ø 630 mm

Kondisi: bekas, Tahun pembuatan: 1999, Technical Details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MK3 Spindle torque: 350 Nm Max. workpiece weight – between centers: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions (LxWxH) approx.: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal carriage X-travel: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Cross slide Y-travel: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Top slide swiveling right 60° and left 120° Thread cutting Njdpfju Ixw Asx Aa Ujct Machine lighting No coolant system (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Centre distance: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1250 / 32-1600 / 36-1800 – 18 steps rpm Feed rate: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed rate 0.015 – 2.8 mm (limit switch coupling not functional, manual shut-off required) Top slide with 4-way tool post Steel plate Ø 705 mm with offset threaded holes Ncedpfx Aaju Ixzno Uet *

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Nsdpfx Aou Nc Emsa Ujct Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Ncedpfx Aju Ng Ncea Uot Grinding diameter min/max, mounting: Ø 200 x 32 mm Spindle speed: 3000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions approx. (LxWxH): 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: Left working area = Manual grinding device for small shank drills, current grinding wheel Ø 120 x 30 mm; mounting Ø 32 mm; speed 3000 rpm; with grinding rest Right working area = Swivel device for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting Ø 32 mm; speed 3000 rpm Cutting angle for 2-fluted drills max 180°, for 3-fluted drills 120° Relief angle 5° - 9°; drill diameter 8 - 40 mm, possible grinding types e.g.: standard grinding, cross-point (DK) grinding, centering grinding, spiral grinding, step drill grinding Machine lighting available *

Kondisi: bekas, en-GB: Technical Details: Grinding spindle - rotatable: yes° Spindle speeds: 2850 rpm Work table: 50 x 134 x 44 mm Table travel: X = 265 mm Table travel: Y = 165 mm Grinding wheel dimension: Bore Ø 20 mm Voltage: 380 V / Hz Machine weight approx.: 113 kg Machine dimensions approx. (LxWxH): 0.63 x 0.56 x 0.64 m This is a benchtop unit. Grinding machine for spiral drill point angles 30° / 40° Grinding wheel bore Ø 20 mm Nodpfx Aaou Ng N Aj Ujct Manual Z-axis travel = 230 mm Spindle head swivels 360° via radial scale Table with clamping surface LxW: 270 x 100 mm for clearance angles 40° and 90°, 3x clamping devices, 14 mm prism, as well as testing device with 12 mm prism and adjustable 90 mm magnifier Column rotatable 360° Grinding guard 2x 220V sockets In good condition.

Kondisi: bekas, Tahun pembuatan: 1971, en-Technische Details: Max. facing diameter: approx. Ø 900 mm Spindle speed: 12.5 - 600 / 24 steps rpm Faceplate speed: 8 - 190 / 12 steps rpm Feed rates (faceplate): 0.03 - 3 mm/step Rapid traverse (all axes): 2000 / 4000 mm/min Tool holder (work spindle): ISO 50 / SK50 Nsdpfeu Idtpsx Aa Ujct Clamping surface (table): 700 x 800 mm Table rotatable: 360° Cross travel (drilling table): 800 mm Max. table load: 1,500 kg Total power requirement: approx. 11.0 kW Machine weight: approx. 7,800 kg Machine dimensions (LxWxH): 3.0 x 2.0 x 2.6 m Control cabinet dimensions: 1,800 x 400 x 1,950 mm Faceplate diameter: 420 mm Faceplate slide travel: 180 mm Max. facing diameter: approx. 900 mm Column longitudinal travel: 700 mm Vertical travel (spindle head): 700 mm Feed drive for column, spindle head and clamping table: - In spindle operation: 0.20 - 10 mm/rev with 34 steps - In faceplate operation: 0.16 - 16 mm/rev with steps Equipment: Heidenhain optical fine measuring system/axis travel measurement system for X/Y/Z/C-table Hydraulics Machine leveling feet/base plates Operator control panel with pendant arm *

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 500 mm Table size: 2230 x 670 mm Clamping surface of table: 1340 x 400 mm Magnetic chuck size: 1000 x 410 mm Table load capacity: 450 kg Spindle head overhang: max. 330 mm Grinding spindle speed: 1,440 rpm Total power requirement: 18.2 kW Machine weight approx.: 3.5 t (machine only) Machine dimensions (LxWxH): approx. 1.9 x 3.3 x 2.25 m Control cabinet dimensions (LxWxH): 1.0 x 0.4 x 1.4 m Precision surface grinding machine Possible surface grinding operations: Ncedpfxox Afpaj Aa Ujt - Cross grinding; plunge grinding; face grinding and grinding with straight grinding track Further details: - Table speed hydraulic, infinitely variable 1...30 or 2...30 m/min - Maximum table stroke 1150 mm - Cross feed manual 0.01 mm - Vertical infeed by hand 0.002 mm, minimum hand infeed 0.001 mm - Automatic infeed 0.001...0.1 mm - Maximum selectable total infeed 5.0 mm - Coolant system (tank with pump) - Hydraulic unit - Control cabinet

Kondisi: bekas, Tahun pembuatan: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 800 mm Nedpfjva Ertox Aa Uect Turning length: facing = 140 mm / cross = 120 mm Center height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20-step Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill stroke: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions (LxWxH) approx.: 2.0 x 0.8 x 1.4 m Thread cutting possible: Metric, Whitworth, and Module threads Equipment: - 2-axis digital readout VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply not included)

Kondisi: bekas, td-001 Njdpfx Asva Evfea Uoct

Kondisi: bekas, Tahun pembuatan: 1959, technische-details-spindeldurchmesser-160 Ncodpfeyzftxex Aa Uot

Tahun pembuatan: 2021, Kondisi: bekas, Technical details: Pressure: 5 t Column clearance: - mm Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Compressed air: 6 bar Connection voltage: 400 V Electrical configuration - Voltage/Frequency: 400/50 V/Hz Total power: 4 kW Approx. machine weight: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! DESCRIPTION OF THE MACHINE Nodsyzzh Espfx Aa Uoct 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is located on the horizontal arm and can be manually positioned on linear guides. In the forward position, the table can be locked manually using a spring-loaded pin. In the working position (under the press head), the table is locked automatically by a pneumatic cylinder. The press head may only be lowered in this position using two-hand control. The control panel is equipped with two-hand switches, emergency stop switch, table lowering button, and force selectors 1, 2. Force can be adjusted via potentiometers in the control cabinet. Two force levels and the corresponding press speed can be set there. The press head travels along the vertical arm of the press. It also moves on linear guides. The head is driven by a leadscrew, which is powered by an electric motor with gearbox via pulleys and a toothed belt. The entire machine is mounted on a table made of aluminum profiles.

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 420 mm Spindle taper: ISO SK 40 Control: Heidenhain TNC 360 Quill stroke, vertical: 75 mm Speed range: 20 ... 4,000 rpm Spindle head swiveling left/right: 90° left / right Feed rate X/Y/Z: 1...6,000 mm/min Rapid traverse: X/Y: 7 m/min, Z: 6 m/min Table size: 900 x 460 mm Table load capacity: 400 kg Weight approx.: 2,300 kg Machine dimensions approx. (LxWxH): 4.0 x 3.8 x 2.0 m Total power requirement: 13 kW Nedou Nc U Iopfx Aa Uect Equipment: - Separate production cell - Coolant system - Operator panel with swiveling arm - Measuring probe SK 40 Heidenhain TS 120 - Oil drip tray

Kondisi: bekas, Technical Specifications: X-axis travel: 200 mm Y-axis travel: 450 mm Z-axis travel: 460 mm Control: Siemens 802S base line Spindle mount ISO: ER 32 Tiltable spindle head, left and right: no Speed range: 150 - 8,600 rpm Feed rate X/Y/Z: 2,000 - stepless mm/min Table clamping surface: 750 x 210 mm Interface: 232 Total power requirement: 3 kVA Weight approx.: 760 kg Machine dimensions approx. LxWxH: 1.9 x 1.2 x 2.1 m Table travel: X-axis: 200 mm and Y-axis: 450 mm Spindle vertical Z-axis: 460 mm Max. tool holder for milling cutter: Ø 20 mm Drilling capacity steel: Ø 13 mm Max. distance spindle to table: 470 mm Ncsdpfxou Ndcaj Aa Uot Equipment: Electronic handwheel Coolant system Central lubrication Internal machine lighting Machine feet

Kondisi: bekas, Tahun pembuatan: 1995, en Technical Details: X-axis travel: 500 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Ncsdpfxeu Ndfuj Aa Ujt Spindle mounting ISO: SK 40 Spindle head swivels left and right: 45° each Speed range: 45...2000 rpm Spindle head: Distance table - spindle center: max. 300 mm Distance spindle nose to table: max. 300 mm Feed rate: 16...800 / 18 steps mm/min Table clamping surface: 1000 x 165 mm Table tiltable to both sides: yes, degrees Control voltage: 380 V Total power requirement: 4.6 kW Machine weight approx.: 1540 kg Machine dimensions approx. LxWxH: 1.5 x 1.5 x 1.6 m The milling beam is adjustable by 580 mm. Outreach min./max.: 250/800 mm

Kondisi: bekas, Tahun pembuatan: 2016, Technical Details: Swing over bed: 402 mm Swing over cross slide: 245 mm Turning length: 1000 mm Distance between centres: 1000 mm Centre height: 200 mm Faceplate swing diameter: 560 mm (with gap) Gap width: 120 mm Ncodpfxovav Sdj Aa Ujt Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper: ISO MK4 Tailstock quill stroke: 180 mm Total installed power: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.4 x 1.0 x 1.7 m The lathe is not equipped with rapid traverse. Axis positioning: 2 axes Read-out: Pinacho Lathe Controller Multifix tool holder with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Kondisi: bekas, en-001 Nodpfxsva Hfhs Aa Usct

Kondisi: bekas, Tahun pembuatan: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height (measured in bed): 220 mm Ncjdpfxev A Sqhe Aa Uet Distance between centres: 1000 mm Spindle speeds: 11.2 – 2240 rpm, 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev, 32 steps Cross feeds: 0.02 – 0.71 mm/rev, 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Machine dimensions (LxWxH): approx. 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation), available free of charge in Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with internal/external jaws, rated for 2000 rpm Thread cutting: metric, module, imperial threads Chip guard Chuck guard (mechanical) MULTIFIX tool post with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection device Machine feet UVV safety preparation complete

Kondisi: bekas, Technical details: Ncodev Sz Dispfx Aa Uet X-axis travel: 1000 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Spindle head swivel: left/right 90°, forward/backward 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head *

Kondisi: bekas, Tahun pembuatan: 1976, en-001 Nsdpfx Aeu R Uk Rja Ujct

Kondisi: bekas, Technical details: electrical version - voltage/frequency: 380 V/Hz total power requirement: 1.1 kW Nsdpfou Nggnox Aa Usct machine weight approx.: 18 kg dimensions L x W x H: 0.32 x 0.50 x 0.25 m EDGE CHAMFERING MACHINE, tabletop unit Application: chamfering, deburring Equipped with milling head Ø 65 mm with carbide inserts Motor speed: 2780 rpm Workpiece mount via 45° prism with 2 supports (L x W): 500 x 40 mm, rotatable 15° - 45° Chamfer width max. 5.0 mm, angle 15° - 45°

Kondisi: bekas, Tahun pembuatan: 1970, Technical details: Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390/455 mm Cross feed: 0.3–3.5 mm Table traverse: longitudinal 1150 mm Table speed: 2.5–25 m/min Table size: 2120 x 600 mm Magnetic chuck size: 1000 x 315 x 100 mm Table clamping surface: 1160 x 315 mm Grinding spindle feed: 0.002 – 0.05 mm Distance table to spindle center: max. 550 mm Overhang of the spindle head: 200–580 mm Grinding spindle speed: 1500 / 3000 rpm Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 1.3 x 1.4 x 1.95 m Coolant system dimensions LxWxH: 0.7 x 0.7 x 0.55 m - Coolant system (tank with pump) - 2 grinding wheel mounts Ncsdpfxsu Nggze Aa Ujt - 4 machine feet as per manufacturer’s specification.

Kondisi: bekas, Technical Details: Maximum grinding wheel diameter: 150 mm Bore diameter: 20 mm Speed: 3,000 rpm Number of stations: 2 units Total power requirement: 250 watts Weight: 30 kg Space requirement approx.: L: 0.56 x W: 0.46 x H: 1.15 m Technical Data: - Motor: AEG 150/250A-50Hz, 220/380V, CEE 16 plug connection Ncodpfxju Ngtno Aa Ust Equipment: - with base cabinet *

Kondisi: bekas, en-GB: Technical details: Maximum grinding wheel diameter: 175 mm Speed: 2750 m/sec Bore diameter: 20 mm Number of stations: 2 units Total power requirement: 0.4 kW Weight: 15.4 kg Space requirement approx.: L:380 x W:252 x H:270 mm Technical specifications: - The base is equipped with 4 mounting holes (diameter = 10 mm) for attaching to a workbench. - Motor: VEM CS 175 with 220/380V-50Hz (1.9 & 1.1A), protection class P33 Ncodpfx Aju Ngtbea Ujt - CEE 16 connection plug Equipment: - With grinding rest and grinding protection on both sides As is, without test run!

Kondisi: bekas, Technical details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Ncedpfx Aasu Ixy Ds Ust Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety guard BxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant unit (without feed)