Beli Spinner Vc-650 bekas (3.844)

Kondisi: bekas, terbuat seluruhnya dari baja tahan karat Lebar tapak: 650 mm Dimensi keseluruhan: (P x L x T): ± 2.900 x 1.250 x 2.500 mm Ndedpfxezzahhj Aivjb Ketinggian dari pengait: 30 mm Ketinggian pemuatan: ± 2.400 mm Ketinggian pembongkaran: ± 1.000 mm dapat dipindahkan

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 308, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 660 mm, gerak cepat sumbu X: 18.000 m/menit, pergeseran cepat sumbu Y: 18.000 m/menit, pergerakan cepat sumbu Z: 15.000 m/menit, lebar meja: 1.600 mm, panjang meja: 650 mm, beban meja: 1.850 kg, berat keseluruhan: 13.000 kg, - Tahun pembuatan: 1994 - Dari tangan pertama, penggunaan sendiri - Berfungsi penuh, terhubung listrik, siap demonstrasi - Kontrol: Fanuc 0MC Njdpfx Asxp Hu Dsivsdb - Area kerja sumbu X: 1300 mm - Area kerja sumbu Y: 650 mm - Area kerja sumbu Z: 660 mm - Permukaan meja kerja: 1600 x 650 mm - Berat benda kerja maks.: 1850 kg - Jumlah & lebar alur-T: 5 x 18 mm - Rentang kecepatan putar: 20 - 6000 min⁻¹ - Kecepatan pergerakan rapid: 18000 (X) x 18000 (Y) x 15000 (Z) mm/menit - Dudukan alat: SK50 / MAS BT50 - Majalah alat: 30 slot - Berat mesin: 13000 kg - No. seri: 308 Harga netto lepas lokasi dari Luckenwalde (Jerman), tanpa transportasi.

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 115.503 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 670 mm, jarak gerak sumbu Z: 625 mm, torsi: 100 Nm, produsen pengendali: Fanuc, lebar benda kerja (maks.): 670 mm, berat benda kerja (maks.): 1.000 kg, tinggi total: 2.940 mm, lebar total: 2.750 mm, lebar meja: 670 mm, panjang meja: 1.400 mm, beban meja: 1.000 kg, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 8 batang, daya motor spindle: 15.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, tegangan masuk: 420 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, BT 40. Tanpa konveyor serpihan. Ndedsyx U Nwopfx Aivsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 50 h, Mesin dijual dalam kondisi baik, dengan jam operasional rendah. Ndodoxbb Hrjpfx Aivjb

Kondisi: bekas, DEMAG Ergotech System 650/1000-3300 dengan gaya penguncian 6.500 kN dan unit injeksi ukuran 3300 Euromap, dilengkapi dengan robot Wittmann W843 pro tahun 2021 dengan sumbu B servo 270° dan sumbu C servo 180°. Mesin ini menghasilkan berat injeksi 1.600 g melalui sekrup 80 mm, yang didukung oleh 4 penarik inti hidraulik, 8 kontrol kaskade, dan 16 zona kontrol saluran panas untuk komponen multi dan bagian cetakan injeksi teknis yang kompleks. KONTROL CNC Kontrol: Demag Ergocontrol UNIT PENGUNCI Gaya penguncian kN: 6.500 Jarak tiang (T x V) mm: 1.000 UNIT INJEKSI Ukuran unit injeksi (Euromap): 3300 Nodpfx Aszz S Uaoivodb Diameter sekrup mm: 80 Berat injeksi maks. (PS) g: 1.600 FUNGSI ALAT & PENANGANAN Penarik inti hidraulik: 4 Kontrol kaskade / penutup jarum: 8 Zona kontrol saluran panas: 16 Perangkat penanganan / robot (Model / Tahun pembuatan): Wittmann W843 pro (2021) Rentang pergerakan sumbu robot X / Y / Z mm: 1.200 / 2.000 / 3.000 Sumbu putar robot (B / C): C servo 180° / B servo 270° PENGGERAK Tekanan hidraulik maks. bar: 190 Sambungan utama V / Hz / A: 3 x 400 / 50 / 241 + 108

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT Ndodpjht Hg Dofx Aivsb PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: bekas, Tahun pembuatan: 2003, Format: 390 x 285 mm Nedpfx Ajzphl Rjivsdb Peralatan: Penyusun buku Dimensi Format Buku (Tinggi x Lebar) Format minimum: 115 x 100 mm (hingga 115 x 70 mm dengan modifikasi format kecil opsional) Format maksimum: 390 x 285 mm (hingga 390 x 310 mm dengan produksi khusus) Ketebalan Buku Ketebalan minimum: 5 mm Ketebalan maksimum: 90 mm Tinggi Tumpukan dan Tinggi Tumpukan Maksimum: 340 mm Kinerja Operasional Kapasitas mekanis: Hingga 3.900 siklus per jam (atau sekitar 65 siklus per menit) Pemberian Makan dan Rotasi: Dilengkapi dengan perangkat pemutar bawaan yang mampu memutar tumpukan buku dengan lembut.

Kondisi: bekas, nomor mesin/kendaraan: 005657, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem perekat: PUR Pembuatan alur sambungan: ya Unit multifungsi: ya Unit perutean atas: ya Ndedpszz Ipajfx Aivsb Kecepatan penggerak maksimum: 30 m/menit Ketebalan pelat maksimum: 60 mm Unit kerja: 13 unit

Kondisi: baik (bekas), Tahun pembuatan: 2001, jam operasional: 12.326 h, kapasitas angkut: 1.600 kg, tinggi angkat: 6.500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, jarak tempuh: 12.326 km, Truk penumpuk elektrik tiga roda Merek: Jungheinrich (Jerman) Tahun pembuatan: 2001 Ndedpfx Ajz Eacdjivjb Kapasitas: 1.600 kg Ketinggian pengangkatan: 6.500 mm Ketinggian saat bergerak: xxx Dilengkapi dengan sistem penggeser beban samping (FREELIFTSIDESHIFT) Baterai: 2006, termasuk pengisi daya Lihat videonya di YouTube

Kondisi: bekas, Tahun pembuatan: 1999, Diameter ayun di atas meja 280 mm Diameter ayun di atas penyangga 150 mm Panjang ayun 500 mm Tinggi pusat di atas meja 140 mm Jarak antar pusat 500 mm Lebar meja 205 mm Lubang spindel 40 mm Rentang kecepatan – variabel 30 – 4.000 RPM Diameter chuck 3 rahang 140 mm Pegang cepat MULTIFIX Tipe A Ndodpez Abw Hsfx Aivsb Daya penggerak – motor spindel 4,0 kW Kerucut penerima pada pin tailstock MK 3 Diameter pin 40 mm Langkah pin 85 mm Tegangan operasi 400 V Total kebutuhan daya 7,5 kW Berat mesin sekitar 800 kg Kebutuhan ruang sekitar 1,40 x 0,95 x 1,55 m !!! Kondisi seperti baru !!! Mesin berasal dari sekolah kejuruan! Hanya digunakan sebagai mesin demonstrasi. - Nomor pabrik: 154 - Tampilan digital 3 sumbu SIEMENS - Chuck 3 rahang RHÖM - Pegang baja cepat MULTIFIX - Ujung senter yang berputar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Saat ini, kami memiliki dua unit Kardex Megamat RS 650 yang tersedia. Kedua mesin ini diproduksi pada tahun 2019 dan mulai beroperasi pada tahun 2020. Keduanya telah diservis setiap tahun oleh pabrikan dan dalam kondisi sangat baik. Nsdez Aiwbspfx Aivsdb Kardex Megamat RS 650 adalah sistem rak putar vertikal yang kuat, dirancang untuk menyimpan dan menangani barang-barang berat. Setiap rak (rak dasar) dapat menampung hingga 650 kg, sehingga mesin ini cocok untuk menyimpan barang-barang besar dan berat. Kedua mesin ini memiliki total 34 rak (rak dasar) dan 43 tingkat: 28 rak tanpa rak antara, dengan tinggi 348 mm 3 rak dengan dua rak antara, menghasilkan total 9 tingkat dengan tinggi bersih 115 mm 3 rak dengan satu rak antara, menghasilkan total 6 tingkat dengan tinggi bersih 170 mm Mesin-mesin ini juga dilengkapi dengan layar Matrix di area akses. Layar LED ini menampilkan informasi seperti lokasi pengambilan, kuantitas, dan detail berguna lainnya. Layar Matrix membantu mengurangi waktu pencarian dan risiko kesalahan pengambilan, sehingga proses pengambilan menjadi lebih cepat dan mudah. Untuk menggunakan semua fungsi layar Matrix, mesin-mesin ini perlu terhubung ke sistem ERP atau Sistem Manajemen Gudang (WMS). Informasi Teknis: Tahun model: 2019 Model: MEG RS 650.1.3250.6.406.34 Tinggi mesin: 7.835 mm Lebar mesin: 3.975 mm Kedalaman mesin: 1.711 mm Jumlah rak: 34 Jumlah tingkat: 9 Tinggi rak maksimum: 348 Lebar rak: 3250 Kedalaman rak: 628 Elektronik: 3/N/PE 400V, 20A

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.780 kg, kapasitas angkut: 125 kg, jangkauan lengan: 3.200 mm, produsen pengendali: ABB, model controller: IRC5, produsen teach pendant: ABB, Kami menawarkan robot industri ABB IRB 6650-125/3.2 Tipe B bekas ini beserta relnya, tahun pembuatan 2005, dengan kontrol IRC5 (pembaruan pada 2018). Nedpfxsz Egpwe Aivjdb Tipe: IRB 6650-125/3,2 Tipe B Kapasitas beban: 125 kg Jangkauan: 3,2 m Rel: IRBT 6003, 7 m (panjang bersih 5704 mm) Nomor seri: 66-52528 (robot), 6003-475 (rel) Tanggal pembuatan: 21.11.2005 Pembaruan kontrol IRC5: 04.2018 Panjang kabel: 15 m Panel fleksibel dengan gulungan kabel 20 m Berat bersih: 1780 kg (robot), 2500 kg (rel) Fitur khusus: 220 V hingga sumbu 4, sistem catu daya SMB sendiri Robot ini sebagian besar digunakan untuk sesi pengajaran dengan mahasiswa (memilih dan menempatkan, menggerinda, merakit bagian kayu) serta untuk proyek penelitian yang bertujuan untuk studi kelayakan dan pengujian konsep di bidang kayu. Jumlah jam dalam mode operasi otomatis kurang dari 100 jam. Sebagian besar pekerjaan dilakukan dalam mode manual dan 100% dalam mode manual. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor GF 22250-650-500 Ndsdpek Abadsfx Aiveb RA1426 The Lippert conveyor belt is from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor and a MOVIMOT frequency inverter for variable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Supports are not included in the delivery and are optionally available upon request. The photos shown were taken while the conveyor system was still installed in a logistics center. Technical Specifications: Conveyor length (NL): 22,250 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Return roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of manufacture: 2001 Optional extras: Support legs Side guides (single-sided or double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 34.900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 112253, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 410 mm, model controller: Brother CNC-A00, panjang total: 2.250 mm, berat keseluruhan: 2.250 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 26, BROTHER TC-22A – 5 SUMBU - Produsen: Brother - Model: TC-22A - Nomor Seri: 112258 - Tahun: 2003 - Jenis Mesin: Pusat Pemesinan Vertikal CNC / Pusat Pengeboran - Kontrol CNC: Brother CNC-A00 - Jumlah Sumbu: 5 - Jangkauan Sumbu X: 500 mm - Jangkauan Sumbu Y: 400 mm - Jangkauan Sumbu Z: 410 mm Nodsz Akqvspfx Aivsdb - Ukuran Meja: 650 × 400 mm - Beban Meja Maksimum: 200 kg - Jarak Meja ke Ujung Spindel: 200–610 mm - Kerucut Spindel: HSK-A40 - Spindel: 1 - Kecepatan Spindel: hingga 12.000 rpm (standar) - Majalah Alat: 26 alat - Diameter Alat Maksimum: 55 mm - Diameter Alat Maksimum dengan Tempat Alat yang Berdekatan Kosong: 125 mm - Panjang Alat Maksimum: 200 mm - Waktu Pergantian Alat: sekitar 0,7 detik - Gerakan Cepat Sumbu X/Y/Z: 56.000 mm/menit - Motor Spindel: sekitar 7,7 kW / rating 10 menit - Catu Daya: AC 200 V, 50/60 Hz - Kebutuhan Daya Maksimum: 25 kVA - Meja Putar / yang Dapat Diputar: Terpasang - Konfigurasi 5 Sumbu: 3 sumbu linier + 2 sumbu putar/yang dapat diputar - Sistem Pengolahan Pendingin: Termasuk - Pompa Pendingin / Pelumas: Termasuk - Dimensi Mesin / Luas Lantai yang Dibutuhkan: sekitar 1.671 × 2.846 mm - Tinggi Mesin: sekitar 2.274 mm - Berat Mesin: sekitar 2.250 kg

Kondisi: bekas, Tahun pembuatan: 2001, Lippert belt conveyor, inclined conveyor with curve and straight section GF 7000-650-500 RA1368 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor featuring a MOVIMOT frequency inverter for speed regulation. Side guides and/or light barriers can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are optionally available upon request. Ndjdpfx Aisk Aa S Tjvsb The shown images of the conveyor system were taken while the equipment was still installed in a logistics center. Technical specifications: Conveying length (NL): 7,000 mm (incline 4080mm + curve 500mm + upper straight section 2420mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable via frequency inverter, both upwards and downwards Drive: SEW geared motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Return roller: Ø = 34 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline angle: adjustable Options available: Support legs Single-sided and double-sided side guides Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, please get in touch with us. Feel free to contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor Decline Conveyor GF 7000-650-500 RA1480 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor features an SEW-branded motor equipped with a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the scope of delivery but can be optionally supplied on request. The illustrated photos show the conveyor system in its installed condition within a logistics center. Technical specifications: - Conveyor length (NL): 7,000 mm (top straight section 1,000 mm + curve 500 mm + decline belt 5,500 mm) - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Overall height (BH): 105 mm - Support legs: optionally available - Conveyor speed (v m/s): variable upwards and downwards via frequency inverter - Drive: SEW geared motor S37 DT80N4/MM07/BW1 - Electrical data: 50Hz, V380-500, kW 0.15 / 0.75 / S1 - Return roller (UR): Ø = 34 mm - Drive pulley (AT): Ø = 81 mm - Belt: Type HSL 8 E - Year of manufacture: 2001 - Incline/decline: adjustable Njdpjk Abckefx Aivedb Options available: - Support stands - Single or double-sided side guides Prices are quoted net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For personalized, professional advice, feel free to get in touch with us. Contact us by phone or email—we are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Kondisi: bekas, SOCO heavy-duty conveyor belt GF 1470-670-580 Nodpfx Aiok Abvgevodb

Kondisi: bekas, SOCO belt conveyor fi Ndsdpfxsk Abvko Aiveb

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, daya: 132 kW (179,47 hp), trommelhacker-rudnik-enners-th-250-300-650-5 Ndjdoy R Nblspfx Aivsb

Kondisi: bekas, Tahun pembuatan: 2001, Lippert belt conveyor inclined conveyor with bend and straight section GF 6640-650-500 RA1420 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor with MOVIMOT frequency inverter for variable speed control. Side guides and/or photoelectric sensors can be installed on request for an additional charge. Support legs are not included in the delivery; these are optionally available upon request. The pictures shown of the conveyor system were taken while it was still installed in a logistics center. Technical data: Conveying length (NL): 6640 mm (inclined belt 5390 mm + bend 500 mm + upper straight section 750 mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): variable via frequency inverter, adjustable up and down Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Nodpok Aa U Iofx Aivodb Drive drum (AT): Ø = 81 mm Belt: type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Options available: - Support feet - Side guides All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For a customized, professional consultation, please do not hesitate to contact us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor Inclined Conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good used condition. The belt conveyor is equipped with a SEW brand motor with MOVIMOT frequency inverter for variable speed control. Side guides and/or light barriers can be fitted on request for an additional charge. Support stands are not included in the scope of delivery but are optionally available upon request. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Conveying length (NL): 6330 mm (inclined belt 3930 mm + curve 400 mm + upper straight section 2000 mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Njdpfok Abb Usx Aivsdb Conveying speed (v m/s): infinitely variable via frequency inverter Drive: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Incline / decline: adjustable Optionally available: Support stands Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us directly. Give us a call or send us an email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Lippert Belt Conveyor Incline Belt with Curve and Straight Section GF 6150-650-500 RA1440 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-brand motor and a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or photoelectric sensors can be installed upon request at additional cost. Support stands are not included in the scope of delivery but are optionally available on request. The photos shown depict the conveyor system in its currently installed condition at a logistics center. Nedjk Abawepfx Aivodb Technical Data: - Conveyor length (NL): 6,150 mm (incline belt 2,310 mm + upper straight section 3,840 mm) - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Structure height (BH): 105 mm - Support stands: optionally available - Conveyor speed (v m/s): infinitely adjustable via frequency inverter (upwards and downwards) - Drive: SEW geared motor S37 DT80N4/MM07/BW1 - Electrical data: 50Hz, V380-500, kW 0.15 / 0.75 / S1 - Return roller (UR): Ø = 34 mm - Drive drum (AT): Ø = 81 mm - Belt: Type HSL 8 E - Year of manufacture: 2001 - Incline/decline: adjustable Optionally available: - Support stands - Single-sided and double-sided side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional advice, simply contact us. Feel free to reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Lippert belt conveyor inclined conveyor with curve and straight section GF 6105-650-500 RA1448 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW-brand motor and a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are available as an option on request. The images shown of the conveyor system were taken while still installed in a logistics center. Technical data: Conveyor length (NL): 6105 mm (inclined section 3180mm + curve 500mm + upper straight section 2425mm) Nsdpfsk Aba Eox Aivjdb Frame width (NB): 650 mm Belt width (GuB): 500 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, 0.15 / 0.75 kW / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: type HSL 8 E Year of manufacture: 2001 Incline / decline: adjustable Optionally available: - Support legs - Side guides Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. You can contact us by phone or email. We are happy to assist you with planning and executing your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AV0572, SPINNER TC800 with Travel Paths X=360mm Z=900mm 45-Degree Slant Bed Design with hardened and ground slideways WITH driven tools WITH Y-axis TOOL TURRET - WITH driven tool stations All tool positions can be powered using turret disks with a pitch circle or on the inner pitch circle Configured as a servo turret Tool Holder System at Turret: BMT65 Number of Tool Stations in Turret: 12 SPINDLE 1 Version up to 3,400 rpm - 85mm As integrated motor spindle, with water cooling using modern synchronous technology Nsdpfsrbhd Njx Aivodb with hydraulic hollow clamping cylinder, bar capacity 85mm Speed range 0-3,400 rpm, Pmax 80 kW / 930 Nm Spindle nose DIN55026/A8 FOOT SWITCH TAILSTOCK can be dragged in the program by coupling with Z-axis, hydraulically clamped to the bed. With additional integrated hydraulic quill and support for fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in X-axis Control SIEMENS 840DE including: - SPINNER SPIOS 24" Touch operating panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for best ergonomics - incl. engraving cycles - 24" LCD flat color display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel for the following functions, integrated in one single control element: - Handwheel mode in jog operation - Feed override in automatic operation - Start button and feed override for single-block setup mode, auto-reset to 0% at end of block -> all key setup functions integrated into one control element - SHOPTURN - 4-axis machining with rotary axis - 3D SIMULATION of finished part - REMAINING MATERIAL DETECTION - DXF Reader CHIP CONVEYOR as hinged belt conveyor, discharge to the right, incl. integrated coolant tank and conveyor pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in work area incl. quick-change coupling STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals supplied in digital form inside the control system. STANDARD PAINT two-tone in light grey RAL7035 and blue-grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images shown are not necessarily of the individual machine but of comparable models. Shown accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed quotation ex works. Visit our factory near Munich or one of our showrooms. We may have additional comparable machines on offer. Prior sale expressly reserved.

Tahun pembuatan: 1995, Kondisi: bekas, Gaya penguncian: 6500kN, gaya penahan: 7150kN, jarak bukaan maksimum: 930mm, tinggi pemasangan cetakan: 360-920mm, jarak maksimum antara pelat penjepit cetakan: 1850mm, pelat penjepit cetakan: 1350x1350mm, jarak kolom yang bersih: 900x900mm, berat cetakan maksimum: 8,6t, proporsi berat maksimum pada pelat penjepit cetakan yang bergerak: 5,7t, diameter sekrup: 110mm, rasio L/D: 17,2, tekanan injeksi: 1270bar, volume langkah: 3570cm³, berat bagian yang diinjeksikan (PS): 3180g, jarak pemberian dosis maksimum: 375mm, jarak nosel maksimum: 850mm, kedalaman pencelupan nosel (SVO): 70mm, gaya penekanan nosel: 200kN, pemanas silinder yang terpasang: 52kW, kapasitas corong pengisian: 110l, sekrup mesin rusak. Dilengkapi dengan dokumentasi. Pemeriksaan di lokasi dapat dilakukan. Ndsdjzzqcpopfx Aiveb