Beli Tria 80-49 bekas (18.773)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: Iiedpfxjy S Ru Ao Alceb - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, MBZ-72-80-3 Iiodpjy S Hazsfx Alceb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain 430, berat benda kerja (maks.): 800 kg, 1 Iodpsy Szq Uofx Alcoib

Kondisi: bekas, Drive Motor, DC Servo Motor LENZE Type GFQBT 80-24 Isdpfotpkx Nsx Alcsib Spindle Motor, Electric Motor, Main Spindle Motor Serial No. 184592 Year of manufacture: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 Amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 Amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm keyway) Shaft extension: approx. 47 mm (shaft projection from centering collar) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 threaded holes - Encoder, Tachogenerator, GBR 190V Longlife Tachogenerator HÜBNER Type TDP 0.2 LT-4 Tacho voltage: 60 V / 1000 rpm Output current: 67 mA (max. 200 mA) Maximum speed: 9000 rpm Forced Ventilation Unit LENZE (EBM) Type G2E 120 Power supply: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions (L x W x H): 690 x 340 x 430 mm Net weight: 45 kg Good condition.

Kondisi: bekas, Single-Column Eccentric Press RICHTER Type PEKRS 80 Year of manufacture: 1970 – Overhauled in 2024 Press force: 80 tons Throat depth: 350 mm Table size: 900 x 650 mm Through-hole in clamping table: Ø 200 mm Ram area: 700 x 500 mm Strokes per minute: 70 spm Stroke adjustment: 6 - 100 mm Ram adjustment: 85 mm Max. shut height: 400 mm Clamping shank bore: Ø 50 mm Table height above floor: 810 mm Motor power: 8 kW Power connection: 400 Volt, 50 Hz - Pneumatic clutch-brake combination by ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with rupture disc in the ram - Centralized grease lubrication with hand pump Space requirements L x W x H: 1800 x 1250 x 2830 mm Weight: 5.7 tons Very good condition Iodpfxoi Db Ibo Alcjib Technically overhauled and fitted with new electrics to meet the latest UVV (accident prevention regulations) Control system conversion in 05/2024 – suitable for hand-loading operations – according to DGUV Information 209-030 Press Inspection as well as Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools – Presses – Part 1: General safety requirements EN ISO 16092-2: Machine tools – Safety of presses – Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for fast troubleshooting - New electrical cabinet mounted on the side of the machine - Completely based on SIEMENS with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and anti-tie-down function - Electric foot switch - Cam controller with runtime monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure scale - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand control 3 = Single stroke, foot control 4 = Continuous run, foot control 5 = Automatic continuous run 6 = Reverse run

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang total: 780 mm, lebar total: 960 mm, tinggi total: 1.630 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 06/2027, nomor mesin/kendaraan: 2026, BARU +++ BARU Mesin Pemasak Krim CK 80 BARU +++ BARU Kerja efisien untuk memasak dan memanaskan krim serta adonan Iiedpjv H Ti Hsfx Alcsb kontrol suhu yang presisi timer digital, 2 kecepatan kapasitas tangki 80 liter kapasitas bahan: 4 hingga 50 liter konstruksi stainless steel dilengkapi roda tangan untuk pengosongan mesin dapat dipindahkan (bergerak) hanya di tempat kami, diuji DGUV V3 koneksi 400V, steker 32A-CEE ukuran 960 x 780 x 1630 mm (PxLxT) mesin BARU diperiksa SAB dengan garansi + layanan suku cadang Opsi: Layanan sewa & leasing Panel Sentuh LCD Katup keluaran DN50 pemanas lebih kuat kontrak perawatan layanan pengiriman paket servis pelatihan & commissioning Kami memiliki pilihan mesin roti TERBAIK!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, lebar kerja: 615 mm, lebar total: 3.100 mm, panjang total: 750 mm, tinggi total: 1.135 mm, Tersertifikasi DGUV hingga: 06/2027, jenis arus masuk: tiga fasa, berat keseluruhan: 320 kg, panjang pemotongan (maks.): 600 mm, lebar sabuk konveyor: 615 mm, tahun perombakan terakhir: 2022, Mesin produksi roti potong Frilado model MSA 80, pengisian manual, pengoperasian satu orang, pelat atas stainless steel, koneksi 400V, steker CEE 16A, mesin bekas. Iedpfxovkthko Alcoib Banyak mesin bakery lain tersedia di stok!

Kondisi: bekas, Produsen: Grundfos -tipe: LP 80 125/124 B-F-A-RUUV -model: 48/62941-P1-0250 -debit volum: 50 m³/jam -tinggi angkat: 15,5 m -tekanan operasi: 16 bar -suhu operasi: 80°C -ukuran sambungan: DN80 Iiodpfxoy R Edce Alcob

Kondisi: sangat baik (bekas), NOMOR KATALOG 7050 DATA TEKNIS - diameter roda: 800 mm - ukuran meja: 1100x800 mm - meja dapat diatur kemiringannya - motor: 5,5 kW - tinggi pemotongan maksimum: 340 mm - jarak pita ke rangka: 680 mm - diameter saluran ekstraksi: 90 mm - dimensi (p/l/t): 1500x950x2600 mm - berat: 987 kg Iodpfx Alsy R A Edocsib KEUNGGULAN – produksi Polandia – kondisi sangat baik – gergaji bekas Harga netto: 8.900 PLN Harga netto: 2.120 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi nilai tukar)

Kondisi: siap digunakan (bekas), Säulenschwenkkran, Schwenkkran, 80 kg Kran, Gebrauchtmaschine Tragfähigkeit: 125 kg Isdpsv R Du Ujfx Alcsib Säulenhöhe: 3800 mm Auslegerlänge / Ausladung: 1650 mm Kettenzug: Demag PMV5-V2F6 Tragfähigkeit: 80 kg Elektrische Daten: 400 V; 0,3 kW; 1,5 A

Kondisi: baik (bekas), Design: acid-resistant impeller and housing Manufacturer: STORK Pumps -Type: FRER 80-140 -Dimensions: 1000 x 400 x 550 mm Iiodpfx Aljn R D Tkocjb -Port dimensions: DN80; DN80 -Voltage: 400 V -Electric power: 5.5 kW

Kondisi: bekas, 050e60a4 Isdswffpbepfx Alceib

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 2.080 h, kapasitas angkut: 2.000 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.350 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.150 mm, panjang garpu: 1.200 mm, berat kosong: 3.600 kg, panjang total: 2.200 mm, jenis penggerak: Elektro, lebar konstruksi: 1.200 mm, Truk Forklift Listrik 3 Roda Titik berat beban: 500 mm Tipe tiang: Triplex Kondisi teknis: baik Iodpjy Scmqofx Alcjib Jenis ban depan: superelastik Kondisi ban depan: 100% Jenis ban belakang: superelastik Kondisi ban belakang: 100% Voltase baterai: 48V Baterai Ah: 750Ah Produsen baterai: Kapatest 80% Tahun pembuatan baterai: 2021 Deskripsi: Penyesuaian garpu, rentang pembukaan 330-1.000 mm Sisi geser, alat penyetel garpu, Katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, atap penutup, kaca depan, pemanas, kabin penuh, kontrol impuls, pengangkatan bebas penuh, sertifikat CE.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 147 kW (199,86 hp), jenis bahan bakar: listrik, Tahun pembuatan: 2026, de Ijdpfx Aljy S Ai Escoib

Kondisi: bekas, Ekstraksi asap las, sistem filter, ekstraksi debu LINCOLN NORWELD Ekstraksi sentral, sistem ekstraksi, filter silo, filter cartridge, filter impuls, filter penghilang debu Tipe FU-80-A No. Seri: 001799 Tahun produksi: 1996 Aliran udara max. 6000 m³/jam (tergantung pada daya kipas) Luas filtrasi 80 m² (4 buah masing-masing 20 m²) Koneksi ekstraksi di inlet filter Ø 250 mm Iisdpfx Aloxf Up Iocsb Koneksi buangan di outlet filter Ø 250 mm Koneksi udara tekan 4 bar - tanpa kipas, tanpa kontrol filter - Kategori filter C, efisiensi pemisahan 99,9% - pembersihan filter secara pneumatik - Inlet filter dengan penutup pneumatik - 4 buah cartridge filter bekas Ø 325 mm, panjang 1200 mm - Pintu servis 240 x 240 mm Kebutuhan ruang P x L x T 1400 x 1600 x 2970 mm Berat: sekitar 300 kg kondisi baik

Kondisi: bekas, Tahun pembuatan: 1994, Overview The GEA Westfalia SB80-06-076 centrifugal separator was previously used in a brewery in Estonia. Due to the complete shutdown of the production facility, this unit is now for sale. The separator was frequently operated up until the factory closure. Technical Data 4,500 revolutions per minute with self-cleaning bowl. Accessories Spare parts Tools Iiedjv N Hcxopfx Alcjb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, - BEKAS - PUSAT PEMESINAN VERTIKAL 3-SUMBU Pergerakan Sumbu X: 800 mm Pergerakan Sumbu Y: 530 mm Iiodpfjy R E T Rox Alceb Pergerakan Sumbu Z: 530 mm Jarak Ujung Spindel ke Meja: 70-600 mm Kecepatan Gerak Rapid X - Y - Z: 48 m/menit SPINDEL: 120 - 12.000 rpm; 5,5-7,5 kW; ISO 40 UKURAN MEJA: 900 x 520 mm BEBAN MAKSIMAL: 200 kg MAGAZIN ALAT: TIPE KERANJANG; 25 POSISI DIAMETER MAKS ALAT: 63,5 (80) mm PANJANG MAKS ALAT: 250 mm BERAT MAKS ALAT: 4 kg UNIT KONTROL: FANUC 0i-MC BERAT: 5.500 kg DIMENSI KESELURUHAN: 3.250 x 1.900 x 2.700 mm AKSESORIS: Konveyor serpihan; handwheel portabel

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, handtmann-vf80-bg Ijdjy S Rk Repfx Alcoib

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.400 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 75 kW (101,97 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 300 m³/jam, en_001 Iedey R Nnfspfx Alcjib

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 95 mm, diameter pembubutan: 800 mm, diameter pembubutan di atas alas geser: 800 mm, diameter pembubutan di atas carriage atas: 530 mm, panjang pembubutan: 4.000 mm, berat benda kerja (maks.): 6.000 kg, The PORĘBA TPK-80/4M universal lathe has been extensively rebuilt and modernized by us. It features technical specifications in line with the technical and operational documentation of a new machine, fulfills WOT technical acceptance conditions and Polish standards, and also complies with EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrics. Iedpfxsy N R Iwe Alcoib Availability: In stock, under power, available for inspection at any time Technical specifications: - Centre distance/Turning length: 4000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Transverse: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Total length: 6000 mm - Width: 1800 mm - Height: 1800 mm - Total weight: 6200 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Kondisi: baru, Tahun pembuatan: 2026, daya: 15 kW (20,39 hp), gaya penekanan: 80 t, panjang langkah: 600 mm, lebar meja: 600 mm, panjang meja: 800 mm, kedalaman tenggorokan: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, drawing, cutting, and assembly processes. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance in medium and heavy-duty applications with its robust frame, high capacity, and precise operation capabilities. Key Advantages - Rigid, vibration-free steel construction frame - High precision (≤120 micron/meter) - PLC controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life, low maintenance costs Applications - Metal forming - Deep drawing and forming operations - Cutting and punching - Assembly and pressing - Automotive manufacturing and supplier industry Standard Features - Stress-relieved steel construction frame using vibration method - PLC control and touchscreen panel - Argon welding applications - Certified welding (EN ISO 15614-1 / 2017), WPQR & WPS approved - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Ton - Stroke: 600 mm - Throat Depth: 300 mm Iijdpfxsyzb Dto Alceb - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Overall Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, diameter mata gergaji: 285 mm, ketinggian potong (maks.): 80 mm, Rentang pemotongan baja bulat pada 90°: 80 mm, kecepatan mata gergaji: 200 rpm, Kisaran pemotongan baja persegi pada 90°: 50 mm, diameter pemotongan: 80 mm, kecepatan rotasi (min.): 200 rpm, kecepatan rotasi (maks.): 200 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Fully Automatic High-Speed Circular Sawing Machine – CHK-80 Circular sawing machines are industrial cutting solutions designed for precise and serial cutting of pipes, profiles, and solid metal materials. They are especially preferred in mass production lines for their ability to deliver fast, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines offer high production efficiency thanks to their robust mechanical structure and advanced automation system. With a PLC-controlled automation system and a touch-screen operator panel, cutting parameters can be easily adjusted, and serial cutting operations can be performed with high precision. The machine’s spheroidal cast iron body, powerful gearbox system, and servo feeding technology provide vibration-free operation and long tool life. CHK Series machines are developed for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feeding system • PLC-controlled automation system • High cutting precision and stability • Robust machine construction for industrial use Areas of Application • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and sub-industry Standard Features • Precision cutting and smooth surface quality • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven material feeding system • Automatic loading system • Conveyor belt system • Electromagnetic brake system • Scrap separation system • Diameter control system • Hydro-motor driven chip cleaning brush • Pneumatic pressure control system Ijdpfx Aeyq N Hmslcsib • Easy operation with PLC control unit • Torque control system for extended blade life • Easy adjustment of vise pressure according to material type Technical Specifications – CHK-80 Cutting Capacity (Round): Ø10 – 80 mm Cutting Capacity (Square): Max 50 × 50 mm Cutting Capacity (Rectangular): Max 70 × 50 mm Main Motor Power: 7.5 kW Hydraulic Motor Power: 3 kW Material Feeding Motor Power: 2.2 kW Circular Saw Blade Size: Ø285 × 1.7 × 2 mm Blade Speed Range: 20 – 200 rpm Single Feed Length: 750 mm Bundle Material Feed Length: 3000 mm Trim Length: 60 – 70 mm Machine Weight: 3050 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, lebar meja: 600 mm, panjang meja: 800 mm, tinggi meja: 850 mm, lubang tembus di meja: 190 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 100 mm, Perlengkapan: penghadang cahaya keselamatan, D TYPE ECCENTRIC PRESSES – GENERAL FEATURES • Steel construction body • Stress relieving by vibration for the body and welded parts • Table parallelism and perpendicularity tolerances comply with ISO and DIN standards • Pneumatic clutch and brake combination – OMPI, Italy • Ram supported by 8 guides • Ram with cushion cylinder • Parts such as ram, connecting rod, and slide block made of GS52 steel casting • High strength monoblock crankshaft – 4140 • Bronze bushing in connecting rod (Zr14) • Rear flywheel • Supplied with spare table • Hydraulic overload protection • Motorized table-to-ram adjustment • Automatic central lubrication • Pneumatic pedal with latch and dual-hand control with timer • Electric counter • PLC application and touchscreen – DELTA • Electrical switchgear by SIEMENS and SCHNEIDER • CE conformity – OPTIONAL Isdpfxovxhb Ue Alceib • Finger protection light barriers – SICK, LEUZE • Safety PLC (monitors all electric systems, valves, two-hand and pedal) – PILZ • Dual-coil safety valve – GPA, TOPAIR • Position-locked limit switch and control panel • Safety block • Protective safety guards in compliance with CE directives MODEL D TYPE MONOBLOCK FRAME Capacity 80 Ton Distance Between Table and Ram 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Bore Diameter 190 mm Table Size 600 / 800 mm Die Clamping Bore Diameter 40 mm Ram Dimensions 245 / 410 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 RPM Approx. Weight 6,500 kg

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 80 t, lebar meja: 660 mm, panjang meja: 860 mm, gaya punching: 80 t, lubang tembus di meja: 180 mm, penyesuaian langkah: 110 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force generated through an eccentric mechanism used in cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. The rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for continuous production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Applications - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double coil safety valve • Manually adjustable stroke • Beam barrier finger and hand safety protection system • PLC control system • Dual hand/foot pedal control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate Iiedpfx Alevtx H Rscjb • Coil decoiler, feeder, and straightener • One set of die to spec • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed clearance: 420 mm Distance between side frames: 400 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table dimensions: 540×740 mm Die holding slot diameter: Ø40 mm Ram dimensions: 370×230 mm Table height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approx. weight: 4000 kg Note: Please contact us if you require changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, panjang langkah: 500 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 30 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 80/30 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 80/30 ton column type hydraulic deep drawing press is an industrial press solution with a four-column rigid frame, specifically engineered for high-precision metal deep drawing, forming, and die testing applications. Its St52 grade steel construction is stress-relieved by vibration technique, ensuring high parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and cushion systems operate independently, with precise stroke and pressure adjustments available via the operator panel. Featuring hydraulic components from REXROTH or PARKER, an IE3 class motor, and PLC control, this model ensures long service life, safety, and energy-efficient operation. Automatic lubrication and contamination alerts for filters minimize maintenance requirements. This machine is ideal for small to medium series production, die testing, and precision forming tasks. Key Advantages - Four-column rigid press frame design - Independent stroke and tonnage adjustments for ram and cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance costs, long service life Areas of Application - Metal deep drawing applications - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s CUSHION FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 200 mm – Ck45 CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE MACHINE HEIGHT: 3300 mm Iodpfx Ajx N Ultolcsib APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm BED HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (adjustable via touch panel) RAM / CUSHION STROKE & TONNAGE SETTING: Adjustable via touch panel SYSTEM & PRESS STATUS INFORMATION: Viewable via touch screen DIE MEMORY: Adjustable via touch panel LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons