Beli Alrowa No4, 1-2" bekas (108.528)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1 500 mm grinding wheel diameter -T2 400 mm grinding wheel diameter -T6 internal grinding attachment -T7 internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP monitoring on T1 and T2 by ELASO, contactless integration into the control interface -GAP monitoring on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock: hydraulic, with fine adjustment +/- 150 µm -Dressing device on subtable, workpiece spindle side -Dressing device on subtable, tailstock side -Dressing device on table top -New service- and operator-friendly enclosure SPECIAL FEATURES: Workpiece spindle head with direct drive *strongly recommended for non-cylindrical grinding Nedpfeuxfu Nsx An Uecu *Max. workpiece weight (overhung): 75 kg *Max. workpiece weight (between centers): 150 kg *water-cooled *MK5 combined with short taper mounting acc. to DIN 55026 *Oriented spindle stop *Fixed base B axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL REFURBISHMENT: -Complete machine overhauled according to Kellenberger measurement protocol -New paintwork Hydraulic unit new: -Improved temperature control (oil cooler) -Energy saving: only one pump, also not in continuous operation! -Pressure monitoring -Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X-axis -Wear-free, as there is no contact in operation -No loss of accuracy, even in long-term operation at full load at maximum speed -Friction-free at low speeds -No reversal jump in frictional force when changing direction -Transmits the smallest rotational movements -No stick-slip effect even at low speeds -No fluctuations in frictional torque due to ball circulation -Higher axial rigidity compared to ball screw drives -Significantly better damping, resulting in improved workpiece surface finish and tool service life -No vibrations due to ball circulation -Suitable for high speeds and accelerations -Cost-effective alternative to linear motors with higher accuracy and significantly lower heat generation -Significantly lower power loss, preventing issues with chips on permanent magnets -Much lower cooling requirements than linear motors ELECTRICAL REFURBISHMENT: -New, modern CNC CYLINDRICAL GRINDER control system with BEMA cylindrical grinding user interface -Newly built electrical cabinet -New drive technology -Replacement of all electrical wiring Pressure switches, etc. -New absolute optical scales on X and Z axes -New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a base license and various options, which are available depending on the machine’s configuration. Software base: - External and internal oscillating grinding - External and internal plunge grinding - External and internal face oscillating grinding - External and internal face plunge grinding - External and internal taper oscillating grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillating grinding - Workpiece...

Kondisi: bekas, Tahun pembuatan: 2001, td01 Ncedsxxl Sgspfx An Uju

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a copying milling machine made by Franz Kuhlmann KG, model series GM ½. Ncedpfx Anjwal Dhs Usu The machine is fully functional and ready for immediate use. Technical data: X-axis (Longitudinal travel): 330 mm Y-axis (Transversal travel): 200 mm Z-axis (Vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet chuck bore up to 8 mm Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be organized across Europe at extra cost, if required. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2011, ukuran ban: 385/55/22.5, Tahun pembuatan: 2011,

Tahun pembuatan: 2006, Kondisi: hampir baru (bekas),

Kondisi: bekas, 1 pair of transport dollies, platform trolleys, transport carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Nsdpfjxcixlox An Ujcu Load capacity per dolly: 1000 kg Platform size per dolly: 1050 x 255 mm Deck plate (platform) material thickness: 4 mm Overall height: 145 mm Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly features 4 swivel-mounted fixed castors with white polyamide wheels, bolted to the deck plate - Two of the castors per dolly are equipped with brakes - Steel sheet carrier plate as platform surface with reinforced side flange Dimensions (L x W x H): 1050 x 265 x 145 mm Net weight per dolly: 17 kg Total weight (both dollies): 34 kg Used, in good condition Price stated is for one pair = 2 heavy-duty dollies Delivery includes 2 pieces of this universally and flexibly applicable heavy-duty transport trolleys. Currently, 50 pairs in stock. Both dollies have a total of 8 swivel castors and can carry up to 2 tonnes combined. Our customers use them for transporting scantlings, boards, planks, and sawn timber. Other applications include moving rolled iron, beams, and heavy pipes within the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machinery skates, material dollies, or machine transport platforms.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kompresor, Produsen: GEA Tahun produksi: 2012 Model: 2 MVR 1 Kapasitas pasokan: 35.000 l/jam untuk whey Kapasitas penguapan: hingga 25.000 kg/jam Tipe: Evaporator MVR dengan TVR Finisher Konsentrator: dari 20 hingga 60% bahan kering Termasuk pasteurisasi dengan injeksi uap Kompresor MVR: PILLER Daya Kompresor MVR: 456 kW Ncodpfxeyvrwte An Uou Konsumsi uap Finisher: ~900 kg/jam Konsumsi uap pasteurisasi: 900 – 1700 kg/jam

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Perlengkapan: ABS, EBS (Sistem Rem Elektronik),

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 931216, Technical Specifications: - Edge sanding machine for edge processing on welded casings, cabinets, safes, etc. - SIEMENS control for indexing and oscillation - Max. sanding height approx. 1200 mm - Sanding belt dimensions: 100 x 2240 mm Ncjdpjggbmaofx An Uju - Sanding belt speed: 12 + 24 m/s - Swiveling sanding unit - 2 magnetic clamping plates - Motorized sanding dust extraction - Pneumatic connection: 6 bar - Power supply: 400 V - Space requirements approx.: W 2500 x H 2000 x D 2000 mm - Weight approx.: 1500 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, lebar total: 1.750 mm, panjang total: 1.750 mm, tinggi total: 1.700 mm, jenis arus masuk: tiga fasa, The HYDRO WASH 1200 2-in-1 automatic spray washer is a multifunctional device, enabling fully automated cleaning of parts in a motor-driven rotary basket, or—for more complex shaped parts—high-pressure cleaning at 140 bar. Thanks to this combination of processes, it can be confidently stated that this machine is suitable for any workshop. It is perfectly suited for companies specializing in the reconditioning of turbochargers, steering racks, as well as gearboxes. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors have been applied. Operating principle: Before first use, fill the tank with cleaning fluid. The recommended solution is a mixture of MRS Cleaner Strong concentrate and water, in the specified ratio. The Hydro Wash cleaner allows both manual and automatic washing. a) To start automatic washing, prepare the machine (fill with water and concentrate), close the metal glove guard, close the washer lid by simultaneously pressing and holding two buttons (front and rear of the device), and press the start button. *Basket rotation is possible with the lid open—by pressing the right button on the foot pedal, or simultaneously pressing both buttons (front and rear of the device), provided the metal glove guard is closed. b) To start manual washing, close the washer lid by simultaneously pressing and holding both buttons (front and rear). Open the metal glove guard and press the left button on the foot pedal. STANDARD EQUIPMENT: - Lid disengagement sensor activated when the lid is opened during washing, - Tank liquid-level sensor, preventing dry operation, - Fluid temperature sensor, - Adjustable spray arms with nozzles from the renowned Spraying System manufacturer, made of stainless steel, - Mechanically driven rotary basket, - 140 bar high-pressure pump, - Compressed air gun, - Air pressure reducer with integrated water separator, - Coarse particulate filter (mesh size 0.8mm), - Fine particulate filter, - Adjustable feet, - Drain valve, - Pneumatic actuators. Technical specifications: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Work time programming: 0–99min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray capacity: 200l/min - Spray operating pressure: 4.5–6bar - Manual wash pressure: 140bar - Total width: 1750mm - Total depth: 1750mm Ncsdpfjxm Ullox An Usu - Total height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional extras: - Belt-type oil separator - Low-pressure lance kit - Reinforced pump OUR PRODUCT RANGE ALSO INCLUDES HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. WE ALSO OFFER 800 AND 1000 MODELS. CONTACT US FOR INFORMATION ON OTHER MODELS.

Kondisi: sangat baik (bekas), 01 Nedpfx Ansyfmt He Ujcu

Kondisi: sangat baik (bekas), Kontaktmanometer-20240618 Nsdpsyfffzsfx An Uscu

Kondisi: sangat baik (bekas), manometer-160-tgl Njdpfxjyffarj An Uscu

Kondisi: sangat baik (bekas), Manometer, manometer penguji, alat pengukur tekanan dengan bellow, teknologi pengukuran tekanan-suhu, manometer bellow, alat penguji tekanan, penguji tekanan -Pabrikan: TGL, Manometer 0 - 10 bar belum terpakai dalam kemasan asli -Tipe: 1/BM 20/2 160Ø 0-100 mWs -Jumlah: 8x manometer tersedia -Harga: per unit -Dimensi kotak: 200/180/H70 mm Nedpfjyfd Tkjx An Uocu -Berat: 1 kg/unit

Kondisi: sangat baik (bekas), manometer-tgl-20x Ncsdpfx Aeyd S Rbon Uju

Kondisi: sangat baik (bekas), de-to-hu-001 Ncjdpfx Aneyd H H Rj Usu

Tahun pembuatan: 1988, Kondisi: bekas, Datasheet see nameplate. Nedpfx Ajd Ihacjn Uocu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, CARLO SALVI 476 SV fully overhauled 4.76x45 mm 450 ppm - New Electrical System compliant with CE standards, with Inverter and PLC - New Lubrication System - New Motor with Flywheel, Pulley, and Brake - New Drawing Roller Pump - New Belts - Regrinding of all Central Unit parts (Slide, Gibs, Caps) - Replacement of Pins, Bushings, and Nuts - New Bearings - Shims for gears AVAILABLE FOR INSPECTION IN CALOLZIOCORTE (LC) at HBR srl, which will carry out the complete overhaul Ncsdpeh N Di Dofx An Uou

Kondisi: bekas, Tahun pembuatan: 1962, Working length: 1020 mm Ncedpfx Anerh D Ttj Uju Maximum sheet capacity: 3.5 mm Dimensions (W x D x H), approx.: 1640 x 1860 x 1390 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, kedalaman pengeboran: 710 mm, kecepatan rotasi (maks.): 1.250 rpm, lebar meja: 1.250 mm, panjang meja: 1.120 mm, diameter spindel: 100 mm, The submission of a bid obliges the buyer to collect the machine by 28/01/2026! For this purpose, prompt scheduling after auction end is necessary, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Taper bore of spindle: ISO steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center position above table surface: 0 mm Highest spindle center position above table surface: 1,200 mm Maximum distance between spindle quill and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Table clamping area: 1,120 mm x 1,250 mm Longitudinal travel of table: 1,300 mm Cross travel of table: 1,200 mm Ncjdjx Hfugspfx An Ueu 34 feeds for spindle, headstock, and table: 0.017 - mm/rev. Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Circuit diagrams Operating manuals Note: Brake defective, clutch disassembled (included). Estimated repair costs in Germany approx. €3,000.

Kondisi: sangat baik (bekas), de_to_hu_it_lt_lv_nb_nl_pl Ncodpfx Aex R R Iasn Ueu

Kondisi: bekas, Sprockets, Duplex Sprocket, Sprocket - Sprocket Pitch: Duplex 1 1/2" x 1" - Number of Teeth: 25 teeth - Diameter: 318 mm - Total Width: 100 mm - Tooth Width: 24.1 mm - Bore Diameter: 80/130 mm - Quantity: 25x sprockets available - Price: per piece - Weight: 33.5 kg Nsdpfjd Tg Daex An Ujcu - Other sprockets: in stock

Kondisi: bekas, Electric motor, three-phase motor - Power output: 1 kW - Speed: 2700 rpm - Shaft: Ø 14 x 20 mm - Design type: B14 - Protection class: IP 54 - Quantity: 2 motors available - Price: per unit - Dimensions: 240/137/H174 mm Ncsdpfx Aodzylpen Uou - Weight: 7.5 kg

Kondisi: bekas, jenis bahan bakar: listrik, Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor - Sourced from a Still forklift - Drive: 40 V 2.5 kW Njdpjcwqdfjfx An Ujcu - Dimensions: 340/225/H300 mm - Weight: 32 kg

Kondisi: bekas, Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose Ncjdjfk E Abjpfx An Uju -Hydraulic line: Hansa-Flex PHD240Tx1080SF50VASF5045 -Hydraulic hose: HD240T 90 BAR -Dimensions: Ø 58 x 1100 mm -Weight: 4.5 kg