Beli Biesse Mesin Y90L bekas (76.776)

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 Pass-through motorized conveyor belts Hsdpfx Aajidqd Te Iep No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support Hjdoidqf Ropfx Aa Ijp No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) Hsdpfju Rc Anex Aa Iop EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Hsdpfx Aaeu Rc Hyo Iep Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), CNC-controlled electronic machine PC control system type NC 500 – Tooling System software No. 2 through-feed motorized conveyor belts – feed speed (m/min) approx. 35 – 75 No. 2 horizontal drilling supports Drilling units per horizontal drilling support (pcs.) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical drilling support (pcs.) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (pcs.) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screws (endless) for chip extraction CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axis Y1 and Y2) of the drilling units CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC system manages the complete programming of automatic work cycles Hsdpfx Aashvi Duj Isp

Kondisi: sangat baik (bekas), PC control, type NC 400 (with software for managing work cycles) No. 2 motorized throughfeed conveyor belts Max. working width (mm): 3200 - Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit: 11 Hjdpfji D D Tfsx Aa Ijp No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit for upper drilling supports No. 2 upper vertical workpiece clamps No. 2 screws (endless) for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops OPTION: Front loader (for narrow parts: Min 60 mm - Max 260 mm)

Kondisi: sangat baik (bekas), Flexible NC-Automatiklinie zum Bohren, Fräsen und Beschlagsetzen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel-(Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC-Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC-Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC-Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn mit ebenfalls motorisierten Bändern (zum Drehen der Platten um 180° für die Übergabe an die Montagelinien) Hjdpfx Aoidmkrea Iop

Kondisi: sangat baik (bekas), Spalt- und Nutmaschine (gebraucht zum Nuten und/oder zum Teilen eines einzigen Paneels in zwei Teile) Hedjyx S N Uspfx Aa Ijp - Mindestlänge des Werkstücks: ca. 250 mm - Maximale Länge des Werkstücks: ca. 2.700 mm - Mindestbreite des Werkstücks: ca. 124 mm - Maximale Breite des Werkstücks: ca. 1.200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Max. Vorschubgeschwindigkeit: ca. 50 m/min - Gesamtinstallierte Leistung: 82 kW Ausgestattet mit folgenden Aggregaten: POS. 1 Untere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Obere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Untere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Obere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 5 Untere Haupteinheit (Säge) (Rotax-Elektrospindel 11 kW), max. Durchmesser ca. 450 mm POS. 6 Obere Haupteinheit (Säge) (Rotax-Elektrospindel 11 kW), max. Durchmesser ca. 450 mm OPTIONAL: Schall- und Sicherheitskabine

Kondisi: baik (bekas), Pusat kerja terdiri dari: 2 kepala bor (satu atas dan satu bawah) untuk pengeboran vertikal dan horizontal, 1 unit frais atas dan 1 unit frais bawah, 1 unit pisau atas dan 1 unit pisau bawah. KONFIGURASI STANDAR Hjdpjy E Ir Ejfx Aa Iep

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Bidang kerja X: 4600 mm Bidang kerja Y: 1570 mm Bidang kerja Z: sekitar 250 mm Electrospindle 3-sumbu Mata bor vertikal: sekitar 22 Mata bor horizontal X: 6 Mata bor horizontal Y: 4 Pisau alur arah X Motor horizontal tetap untuk lubang pintu Penukar alat rantai sekitar 22 posisi Meja kerja dengan 8 palang Pompa vakum 90 m³/jam Perangkat lunak: BiesseWorks Karpet keamanan Jaring pelindung Hedpfx Aey Exz Dsa Iop Berat sekitar 6100 kg Termasuk suction cup dan 1 unit agregat miring bor-frais-pisau

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 5.900 mm, jarak lintasan sumbu Y: 1.560 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 60 m/menit, kecepatan rotasi (maks.): 20.000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working range: 5,900 mm Hsdpfxoyxm Swj Aa Isp Y-axis working range: 1,560 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X-direction): 6 Horizontal drilling spindles (Y-direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Worktable with suction pads Number of rails with suction pads: 10 Vacuum pads for securing the workpiece Vacuum pump The machine is sold and delivered in its current technical and legal condition (‘as seen and approved’), based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Hjdpfxjyxndbo Aa Iep Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ferwood Code: RU0006888 - Manufacturer Code: C0151A07 - Condition: Used - Functionality: Fully operational - Weight: 25 KG - Dimensions: 70 x 46 x 34 cm - If interested, we offer an overhaul service: please contact us. Hsdpju H H Ersfx Aa Isp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, en Hedpfx Aeyw Nu Esa Iep

Kondisi: bekas, nomor mesin/kendaraan: 008113, #de-machine-data-001 Hedpsw Iddhefx Aa Ijp

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, unit penggilingan awal stasiun lem untuk granul tinggi kerja maksimum 60 mm guillotine pemotong tepi dari rol unit pemotong tepi presisi unit milling kelebihan tepi dari atas dan bawah benda kerja scraper profil scraper datar mesin pemoles Hodpfx Asynizlja Iop panjang mesin 420 cm tahun produksi 2014 berat 1200 kg sertifikat CE

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a production line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Hsdpfx Aaeywk Ele Iop Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 Cam spacing (mm): 500 FORMATTING UNIT (per side): - Protection milling cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) - 2 x Hogger heads DT 10 (2 x approx. 5.8 kW) - Spray unit for liquid anti-adhesive EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue + premelter) SP30 (High Melt + Edge Control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for coils (No. 6 positions) - End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°–25° - Multifunctional unit (radius milling and contour milling) AR 30 (2 x 0.35 kW) - Left: 2 x Universal milling units for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0°–90° - Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x approx. 5 kW) 0°–90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 – spray aggregate (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower – edge trimmer PH 10 OPTION: D.O.M. stacker with carrier column and mobile jib (with vacuum suction cups) for unloading and stacking edge-processed panels.

Kondisi: sangat baik (bekas), de2hu-001 Hsdpfsyvrrqjx Aa Isp

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: AGG0062 - Kode Pabrikan: 6314A0111 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin yang kompatibel: CNC BIESSE ROVER 23/24/27/30/346 - Jika berminat kami menawarkan layanan overhaul, silakan hubungi kami. Berat dan dimensi untuk pengiriman: 2,5 kg, 20x20x20 cm Hedpfx Aaovu Auus Ijp

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah spindel: 21, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 60 m/menit, No reserve price – guaranteed sale to the highest bidder! Hsdpeytr Ryefx Aa Iep TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of stations: 10 MACHINE DETAILS Total connected load: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Collets and cutters are not included in the scope of delivery. Safety guards are supplied as available (right side guard is missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8174

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Hsdpfx Aaeyq Avhs Iep Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 2.400 mm, jarak lintasan sumbu Y: 1.200 mm, jumlah sumbu: 3, berat keseluruhan: 1.700 kg, kecepatan spindel (maks.): 24.000 rpm, BIESSE ROVER J FT 1224 3-sumbu ini diproduksi pada tahun 2017 dan memiliki area kerja 2400 mm x 1200 mm. Mesin ini dilengkapi dengan elektrospindel CNC dengan kecepatan maksimum 24.000 rpm dan meja vakum datar, sangat ideal untuk proses milling, pengeboran, dan pemrosesan panel. Manfaatkan kesempatan untuk membeli pusat pemrosesan kayu CNC BIESSE ROVER J FT 1224 ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. • Sumbu: 3 dikontrol CNC (X, Y, Z) Hjdoyfnp Aspfx Aa Isp • Kapabilitas: Milling, pengeboran, routing kantong, pemrosesan panel • Tekanan udara: 7,5 bar • Kecepatan udara isap: 30 m/s Perlengkapan tambahan: • Meja vakum datar dengan suction cup

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0009466 - Kode Produsen: 03314K00 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin Kompatibel: - Berat: 15 kg - Dimensi: 70x46x34 - Jika berminat kami menawarkan layanan perbaikan, silakan hubungi kami. Hodpfxsyrqxts Aa Iep

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0009466 - Kode Produsen: 03314K00 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin Kompatibel: - Berat: 15 kg - Dimensi: 70x46x34 - Jika berminat kami menawarkan layanan perbaikan, silakan hubungi kami. Hsdpfxoyrqwpo Aa Iop

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0009466 - Kode Produsen: 03314K00 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin Kompatibel: - Berat: 15 kg - Dimensi: 70x46x34 - Jika berminat kami menawarkan layanan perbaikan, silakan hubungi kami. Hsdpfx Aasyrqv Ej Ijp