Beli Boleto Fish Gutting Machine bekas (65.513)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.000 kg, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 370 mm, jarak gerak sumbu Z: 410 mm, model controller: Fanuc Alpha 180is-WB, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Pengajuan tawaran mengharuskan pengambilan tepat waktu sebelum 08.06.26! RINCIAN TEKNIS Bobot benda kerja: 1.000 kg Perjalanan sumbu X: 550 mm Perjalanan sumbu Y: 370 mm Perjalanan sumbu U: 410 mm Perjalanan sumbu V: 120 mm Perjalanan sumbu Z: 120 mm Gbjdpfxjy Nmxxs Alkjl Sudut pemotongan maksimum: 30° Jumlah sumbu: 5 Kecepatan rapid X: 900 mm/menit Kecepatan rapid Y: 900 mm/menit Kecepatan rapid U: 450 mm/menit Kecepatan rapid V: 450 mm/menit Kecepatan rapid Z: 900 mm/menit RINCIAN MESIN Kontrol: Fanuc Alpha 180is-WB Jam operasi: sekitar 32.000 jam Bobot mesin: 3.100 kg PERLENGKAPAN Penyambungan kawat otomatis Catatan: Penjualan tanpa layar di atas panel kontrol.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: AA2/002546, jumlah slot dalam magazin alat: 24, berat keseluruhan: 6.600 kg, panjang meja: 5.200 mm, lebar meja: 1.300 mm, RINCIAN TEKNIS Panjang meja: 5.200 mm Lebar meja: 1.300 mm Jumlah spindle milling: 1 Jenis meja milling: Meja balok Posisi penukar alat: 24 Gsdpfx Aloy Nybtekjbl RINCIAN MESIN Tegangan: 400 V Konsumsi arus: 64 A Dimensi & Berat Dimensi (P x L x T): 10.300 x 2.450 x 2.800 mm Berat kosong: 6.600 kg Paket transportasi: 1 PERLENGKAPAN Perkakas bor Pompa vakum Perkakas Becker Vtlf 250 Pompa Vakum: - Tahun pembuatan: 2008 - Daya motor utama: 5,5 kW - Diameter koneksi: 70 mm - Bebas oli: Ya Catatan: Mesin memerlukan perbaikan. Ada masalah pada sistem CAN-Bus.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 89867, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.765 mm, jarak lintasan sumbu Y: 1.875 mm, jarak gerak sumbu Z: 324 mm, jumlah slot dalam magazin alat: 12, berat keseluruhan: 4.000 kg, DETAIL TEKNIS Area kerja sumbu X: 3.765 mm Area kerja sumbu Y: 1.875 mm Area kerja sumbu Z: 324 mm Panjang meja: 3.600 mm Lebar meja: 1.800 mm Sistem penjepit alat: HSK-F63 Posisi penukar alat: 12 buah DETAIL MESIN Jumlah spindle milling: 1 buah Berat: 4.000 kg Paket transportasi: 1 buah PERLENGKAPAN Meja datar Sistem/Perangkat lunak BiesseWorks Matras pengaman Tersedia alat bor Tersedia unit gergaji Mesin penandaan label Sistem pemuatan Sistem pembongkaran Gbjdpfx Aloy Nxybokol

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 18.649 h, daya laser: 5.000 W, ketebalan pelat baja (maks.): 25 mm, ketebalan maksimum lembaran baja tahan karat: 20 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, RINCIAN TEKNIS Area kerja (P x L): 3.000 mm x 1.500 mm Daya laser: 5.000 W Ketebalan pelat maksimal baja karbon: 25 mm Ketebalan pelat maksimal baja tahan karat: 20 mm Ketebalan pelat maksimal aluminium: 12 mm Gbjdjy Iwmdopfx Alkel RINCIAN MESIN Jenis kontrol: CNC Jam operasi NC AKTIF: 38.900 jam Jam operasi laser AKTIF: 39.498 jam Jam operasi sinar AKTIF: 18.649 jam Berat mesin: 12.000 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, jam operasional: 45.815 h, daya laser: 5.000 W, ketebalan pelat baja (maks.): 25 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 115 mm, Termasuk dalam pembelian: TruLaser 5030 Classic + LiftMaster L3030 + TruFlow 5000 DETAIL TEKNIS Lintasan sumbu X: 3.000 mm Lintasan sumbu Y: 1.500 mm Lintasan sumbu Z: 115 mm Daya laser: 5.000 W Ketebalan plat baja maksimal: 25 mm Ketebalan plat stainless steel maksimal: 20 mm Ketebalan plat aluminium maksimal: 12 mm Berat benda kerja maksimal: 900 kg Gedpfx Aljy Iwl Tsksbl DETAIL MESIN Jenis kontrol: CNC Jam operasi sinar: 45.815 jam Jam operasi laser: 86.475 jam Dimensi & Berat Dimensi (P x L x T): 11.100 x 4.600 x 2.400 mm Berat mesin: 12.000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 2.795 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 400873, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.500 mm, daya pompa: 2.200 W, ketebalan pelat baja (maks.): 120 mm, Mesin telah direkondisi pada tahun 2026 dan dilakukan perawatan setiap 500 jam operasi! DETAIL TEKNIS Area kerja sumbu X: 1.500 mm Area kerja sumbu Y: 1.500 mm Kapasitas pemotongan baja: 120 mm (disarankan: 60 - 80 mm) Kapasitas pemotongan aluminium: 120 - 200 mm Kapasitas pemotongan plastik, batu, dll: tidak diketahui Godpfxsy Nmtve Alksbl DETAIL MESIN Daya pompa: 22 kW (30 HP) Perombakan pompa terakhir: 3 jam operasi yang lalu PERLENGKAPAN Suku cadang Komputer Sistem pelunakan air

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 23.574 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, model controller: Siemens Sinumerik 840D, kecepatan spindel (maks.): 8.000 rpm, The following machine components have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially replaced) - LT module in the control cabinet replaced - Drum of the Knoll unit TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm B-axis: 360° x 0.001° (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feedrate: 1 – 60,000 mm/min Gsdpjy Nbunsfx Alkobl Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Coolant supply: 50 bar Coolant system capacity: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total connected load: 20 kW Dimensions & Weight Space required (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating Hours Power-on hours: approx. 48,804 h Spindle running hours: 23,574 h total EQUIPMENT - Documentation/manual - Infinitely variable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-code) - Tool measurement: Renishaw probe - Tool breakage detection in machining area - Pallet storage (4 positions) - Pallet sequence operation - Fully enclosed work area according to accident prevention regulations (UVV) - Network capability - Technical documents & installation diagram

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 9.956 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17211, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 680 mm, model controller: Siemens Sinumerik 840 D solution Line, kecepatan spindel (maks.): 18.000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 650 mm Travel Z-axis: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Max. workpiece height: 850 mm Max. load per pallet: 500 kg Pallet changer: 2 pallets, automatic Changeover time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h Gbsdoy Nbt Dopfx Alkjl EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (TeamViewer) Energy-efficient system with feedback Stand-by mode for energy saving Direct-drive NC rotary table Clamping hydraulics, 6-channel (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Optical probe Renishaw OMP60 Tool breakage monitoring Pallet sequence operation Crane entry/exit interface software Operating status signal light Work area/machine equipment: high-pressure spray, rinsing pistol, air blast nozzle, exhaust interface Foot switch air blast nozzle Documentation: fully digital (PDF)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 61.082 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.800 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 800 mm, model controller: HEIDENHAIN TNC 426, Perlengkapan: konveyor serpihan, Important information: Auction extended by 14 days. The control unit has subsequently been identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! Gjdpfxsy Dgyfj Alksbl TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Power consumption: 101.1 A Total installed power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run: 61,082 h EQUIPMENT High-rigidity gantry design Precision linear guides and ball screws Spacious working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and mechanical engineering Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Kondisi: bekas, Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.000 mm, jumlah slot dalam magazin alat: 10, model controller: POWER CONTROL PC85, kecepatan spindel (maks.): 24.000 rpm, The machine comes from a business liquidation. Viewings under power are possible! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 3,000 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Milling spindles: 2 Main electrospindle power: 11 kW Spindle speed: 24,000 rpm Total number of tool changer positions: 10 MACHINE DETAILS Type of machining: Milling Control system: POWER CONTROL PC85 Machine programming software: WOODWOP 5.0 Number of controlled axes: 4 Vacuum cups: 32 Single vacuum pump capacity: 120 + 80 m³/h Number of pumps: 2 Total installed power: 27 kW EQUIPMENT Vacuum loading Motorized transfer system Automatic panel loading system Automatic panel stacking system Liquid cooling system CE marking Protective structure for operating units with safety sensors Safety netting on the machine Waste chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Gbedpfxjy R Swie Alkjl External reference: 8457

Tahun pembuatan: 2007, Kondisi: bekas, model controller: POWER CONTROL PC21, berat benda kerja (maks.): 100 kg, kecepatan pemakanan sumbu X: 50 m/menit, panjang pelat: 5.600 mm, lebar pelat: 1.200 mm, The machine originates from a business liquidation. Inspections under power are possible! TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 5,600 mm Minimum panel length: 500 mm Minimum panel width: 250 mm Maximum panel weight: 100 kg Production capacity: 5/7 cycles/min Maximum feed speed: 50 m/min Number of pumps: 1 Individual pump capacity: 90 m³/h MACHINE DETAILS Control system: WINDOWS Programming software: POWER CONTROL PC21 Motion system: Suction cups Total connected load: 24 kW Gsdpfxsy R Slyj Alkobl Storage dimensions (length): 12,500 mm Storage dimensions (width): 6,200 mm EQUIPMENT Vacuum pump Automatic panel rotation system The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and bears responsibility for installation, securing, and use of the machine at the destination. External reference: 8452

Kondisi: bekas, Tahun pembuatan: 2002, jarak pergerakan sumbu X: 10.500 mm, jarak lintasan sumbu Y: 2.700 mm, jumlah slot dalam magazin alat: 24, model controller: POWER CONTROL PC83, kecepatan spindle milling (maks.): 18.000 rpm, The machine originates from a business closure. Inspections under power are possible! TECHNICAL DETAILS Travel range X-axis: 10,500 mm Travel range Y-axis: 2,700 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Main electrospindle power: 12 kW Number of milling spindles: 2 Milling spindle motor power: 12 kW Milling spindle speed: 18,000 rpm Number of controlled axes: 4 Number of tools in changer: 24 Number of tool magazine positions: 12 (2 magazines) Maximum processable panel height: 40 mm Minimum processable panel height: 10 mm MACHINE DETAILS Type of machining: Edge processing, Milling Control system: POWER CONTROL PC83 Programming software: WOODWOP 5.0 Total installed power: 51 kW Number of work zones: 1 Number of rails: 5 Number of vacuum pods: 10 Number of vacuum pumps: 2 Capacity per pump: 120 m³/h EQUIPMENT Worktable: Pod and rail Positioning via NC Automatic panel loading system: Vacuum loading system Automatic panel stacking system Vacuum pump Liquid cooling system Adhesive unit with premelter for hot melt glue Gbedpfxsy R Si Se Alkjl Edge band magazine Tool magazine at rear of the machine Protective structure for operating units with safety sensors Protective net attached to the machine Safety system: Front safety mats Waste chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8458

Tahun pembuatan: 2007, Kondisi: bekas, model controller: POWER CONTROL PC21, berat benda kerja (maks.): 100 kg, kecepatan pemakanan sumbu X: 50 m/menit, panjang pelat: 1.200 mm, lebar pelat: 5.600 mm, The machine comes from a business closure. Inspections under power are possible! TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 5,600 mm Minimum panel length: 500 mm Minimum panel width: 250 mm Maximum traversing speed: 50 m/min Working performance: 5 / 7 cycles/min Maximum lifting capacity: 100 kg Gbodpfxsy R R Tpj Alksl Unit output: 90 m³/h MACHINE DETAILS Control system: WINDOWS Machine programming software: POWER CONTROL PC21 Motion system: Suction cups Total connected load: 28 kW Storage dimensions length: 12,000 mm Storage dimensions width: 7,000 mm EQUIPMENT Automatic panel turning system Vacuum pump The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 8456

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 610555, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 460 mm, jarak gerak sumbu Z: 510 mm, kecepatan spindel (maks.): 6.000 rpm, produsen pengendali: Fanuc, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Perjalanan sumbu X: 610 mm Perjalanan sumbu Y: 460 mm Perjalanan sumbu Z: 510 mm Kecepatan spindle: 60 – 6.000 rpm Tipe dudukan alat: BT40 Panjang meja: 950 mm Lebar meja: 560 mm DETAIL MESIN Kontrol: CNC Merek sistem kontrol: Fanuc Daya: 7,5 kW Jumlah sumbu: 3 unit Gbjdpjy Rxu Usfx Alkjl Dimensi & Berat Dimensi (P x L x T): 2.100 x 2.600 x 2.600 cm Berat: 3.800 kg Paket pengiriman: 1 unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 675002, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 500 mm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Perjalanan sumbu X: 650 mm Perjalanan sumbu Y: 1.100 mm Perjalanan sumbu Z: 500 mm Rotasi sumbu C: 360° Godpfsy Rxryjx Alkobl RINCIAN MESIN Kontrol: CNC Dimensi & Berat Dimensi (P x L x T): 3.500 x 1.800 x 2.800 mm Berat kosong: 13.000 kg PERLENGKAPAN Konveyor serpihan Majalah alat Probe pengukur

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 16090455, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 435 mm, jarak gerak sumbu Z: 210 mm, lebar meja: 500 mm, panjang meja: 1.570 mm, DETAIL TEKNIS Perjalanan sumbu X: 850 mm Perjalanan sumbu Y: 435 mm Perjalanan sumbu Z: 210 mm Panjang meja: 1.570 mm Lebar meja: 500 mm Daya spindel utama: 3,8 kW Jumlah sumbu: 3 unit DETAIL MESIN Pengendalian: CNC Pabrikan kontrol: Heidenhain Daya: 16,0 kW Dimensi & Berat Godpsy Rxq Ajfx Alkobl Dimensi (P x L x T): 2.800 x 1.800 x 2.300 mm Berat transportasi: 3.500 kg Paket transportasi: 3 unit PERLENGKAPAN Termasuk alat Pendingin eksternal Dokumentasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 750 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, RINCIAN TEKNIS Perjalanan sumbu X: 1.000 mm Perjalanan sumbu Y: 750 mm Perjalanan sumbu Z: 750 mm Tipe dudukan alat: ISO40 Kecepatan spindel maks.: 12.000 rpm RINCIAN MESIN Kontrol: CNC Daya: 22,0 kW Gbjdpsy Rxqvofx Alkjl Jumlah sumbu: 3 Berat: 10.500 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 14.434 h, model controller: Siemens Sinumerik 840D, jenis laser: Laser CO₂, daya laser: 3.200 W, Perlengkapan: penghadang cahaya keselamatan, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Controller model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency aggregate, maintenance-free turbo radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts / scrap Drives: Maintenance-free three-phase servo motors Additional highly dynamic Xp axis Quick-change cutting head system Laser cutting head with 5" lens and 7.5" lens Gbodpfxey Rk Uyj Alkol Programmable cutting gas pressure regulation APC capacitive height control and process regulation Automatic focus position setting AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for manufacturing smaller holes PMS plasma sensor system Automatic sheet edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spray unit for secure thick sheet processing Automatic shut-off Work area illumination Workshop programming ToPs 100 lite Control system: Siemens Sinumerik 840D Open, PC-based control, user-friendly interface, online help, integrated e-shop, diagnostics function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light curtain, completely encapsulated and ventilated beam guide, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, daya laser: 3.000 W, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 15 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, en-001 Gbjdpoy Rkz Hsfx Alkel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 0-250-23-0021, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 80 mm, kecepatan pemakanan sumbu X: 138 m/menit, laju pemakanan gandar Y: 80 m/menit, Penawaran mengikat untuk pengambilan tepat waktu paling lambat sampai 15.06.2026! DETAIL TEKNIS Kecepatan Sumbu-X: 138 m/menit Kecepatan Sumbu-Y: 80 m/menit Kecepatan Sumbu-Z: 50 m/menit Gbodpfx Ajy Sad Hjlkol Panjang benda kerja: 300–2.500 mm Lebar benda kerja: 100–1.000 mm Tinggi benda kerja: 4–80 mm DETAIL MESIN Kontrol: power control PC 85 T Dimensi (P x L x T): 6.500 × 2.300 × 2.700 mm Listrik: 3 × 415 V / 50 Hz Daya terpasang: 19,5 kW Sekering: 50 A Pneumatik: min. 7 bar Konsumsi udara: 2.500 NL/menit Koneksi ekstraksi: 2 × 280 mm Kapasitas ekstraksi: min. 4.450 m³/jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.800 mm, lebar benda kerja (maks.): 2.100 mm, tinggi benda kerja (maks.): 60 mm, model controller: CNI N-Conex, kecepatan spindel (maks.): 24.000 rpm, 1 Gbodpfxsy Sadaj Alkel

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, model controller: Siemens 840D, jenis laser: laser serat, daya laser: 2.000 W, ketebalan lembaran (maks.): 8 mm, berat keseluruhan: 20.000 kg, No reserve price – guaranteed sale to the highest bidder! DURMA Laser Cutting System – comprehensively equipped! TECHNICAL DETAILS Maximum sheet thickness: 8 mm Maximum steel sheet thickness: 8 mm Maximum stainless steel thickness: 4 mm Maximum aluminium thickness: 6 mm Maximum tube diameter: 170 mm Maximum tube length: 6,500 mm Maximum round tube diameter: 170 mm Maximum square profile: 120 x 120 mm Maximum rectangular tube: 150 x 100 mm Minimum tube diameter (automatic): 20 mm Minimum tube diameter (manual): 12 mm Gjdpfey N Rqrsx Alksbl Minimum processable tube length: 185 mm Minimum processable wall thickness: 0.8 mm Maximum processable wall thickness (mild steel, 2 kW laser): 8 mm Maximum processable wall thickness (stainless steel, 2 kW laser): 4 mm Maximum processable wall thickness (AlMg3, 2 kW laser): 6 mm Repeatability: 0.05 mm Maximum profile length: 6,500 mm Minimum profile length for automatic loading: 3,000 mm Standard discharge length: 4,000 mm Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3,000 kg Compatible profile shapes: round, square, rectangular, elliptical MACHINE DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser power: 2,000 W Output: 2 kW (2.72 HP) Control model: Siemens 840D Level of automation: Automatic Actuation: Electric Dimensions & Weight Dimensions (L x W x H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg EQUIPMENT CE marking Documentation/manual Chiller Emergency stop switch Fume extraction unit Safety light curtain Centralized lubrication system Precitec Autofocus Procutter cutting head F 150 (focus) Control cabinet air conditioning Manual loading Manual unloading Laser positioning diode Central lubrication unit Small parts disposal box Illuminated cutting area IPG 2 kW laser source Vanterm compact filter unit Automatic loading system (6,500 mm) Unloading unit (6,000 mm) Discharge conveyor, incl. small parts conveyor (rear discharge) Automatic seam tracking Automatic real-time measurement system for centering chuck Calcium carbonate dosing unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 0-250-08-1590, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.250 mm, jarak lintasan sumbu Y: 1.220 mm, jarak gerak sumbu Z: 125 mm, model controller: Homatic 2000 IPC, jumlah spindel: 28, kecepatan spindel (maks.): 24.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Gjdpfx Aey Rmdqslksbl Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control unit model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4 axes Console table 8 manually adjustable supports in X-axis 3 vacuum suction cups per console Vacuum connection for templates Laser positioning aid for suction cups Laser projection for cup positioning Liquid circulation cooling Operating terminal Note: Sale does not include the illustrated adapters, tools, or HSK tool holders.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 669, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 510 mm, model controller: MSC 502, kecepatan rotasi (maks.): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. spindle speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 pos. Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Incremental feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control unit: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Space requirement approx.: 5.5 x 4.5 x 2.7 m Gbjdpfx Asy R U Ecjlksl Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling system High-pressure coolant Internal coolant supply Tool magazine: 60 pos. Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: The shaft for loading must be provided by the buyer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F 36905, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 2.000 rpm, model controller: HEIDENHAIN TNC 360, 1 Gbsdpsy Rrbhefx Alkel