Beli Dumeta D-Jsc-12A bekas (46.830)

Kondisi: bekas, konfigurasi gandar: 2 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, pendaftaran pertama: 10/2007, panjang total: 13.900 mm, lebar total: 2.550 mm, suspensi: udara, kondisi ban: 40 persen, jarak roda: 8.910 mm, warna: lain, Tahun pembuatan: 2007, Perlengkapan: ABS,

Kondisi: bekas, berat muatan maksimum: 32.998 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2024, inspeksi berikutnya (TÜV): 12/2026, volume ruang muat: 30 m³, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 29.965 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, volume ruang muat: 30 m³, lebar total: 2.550 mm, tinggi total: 3.800 mm, Tahun pembuatan: 2026, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 29.965 kg, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, volume ruang muat: 30 m³, lebar total: 2.550 mm, tinggi total: 3.800 mm, Tahun pembuatan: 2025, Perlengkapan: ABS,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Tilting spindle moulder MAKA SF 4510/ GRIGGIO with power feed Very good condition, the machine comes from a small village carpentry workshop with 3 employees Everything works perfectly All bearings and guides are in excellent condition, the machine runs very smoothly Comes with a milling fence, one fence jaw is depth-adjustable and features a fine adjustment with scale, allowing tasks such as jointing, e.g., when making a glue joint profile The entire milling fence can also be adjusted with a set screw, enabling very precise settings With spindle lock via clamping lever Optimal chip extraction with two 120mm extraction ports—one on the milling fence and one on the machine body Equipped with a 30mm spindle, infinitely tiltable from -5° to 45°, tilt adjustment by handwheel with accurate degree scale With forward and reverse operation We deliver the machine personally throughout Germany for €220.00 and provide a demonstration upon delivery—so there is no risk when you purchase; delivery to other EU countries is also possible Large table opening, adjustable in size via several rings (thus, you can use very large diameter cutters and also work safely with small cutters) Spindle speeds: 3200, 4200, 6000, and 8000 rpm Spindle height adjustment also via a handwheel with lock screw Interchangeable spindle (a 40mm spindle can also be used) Optimal power transmission via V-belt drive Table size: 1070mm wide x 940mm deep Lajdpfoy Rh Nzex Ah Tjc Ready for immediate use 380V, 5500W, with motor protection switch against overload Year of manufacture: 1999 Weight: approx. 700kg Machine has CE certification Comes with manual, motor brake, and emergency stop switch, complies with all woodworking trade association (Holz-BG) requirements Additionally, you'll receive a 3-roller power feed unit from HAFFNER with 8 speeds Optimal, simple, fast, and safe operation

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2008, panjang total: 9.480 mm, lebar total: 2.470 mm, suspensi: udara, ukuran ban: 385/65 R 22.5, jarak roda: 7.330 mm, Tahun pembuatan: 2008, Perlengkapan: ABS,

Kondisi: siap digunakan (bekas), D&K System Jr. Baujahr 2006 Maximales Format: 68x76 cm Minimales Format: 20x28 cm Lodpfx Ahowhcfxj Teac Verarbeitet bis 500 g/m² Einseitige Thermofolien-Laminiermaschine Accufeed Jr. Automatischer Bogenzuführer, Acculam Jr. Laminator, Accu-III Jr. Automatischer Bogentrenner, Ablagetisch mit Rüttler (Jogger Catch Tray Delivery)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, en_flachschleifmaschine_saeulenbauweise Lodpfx Aoy Hr Uyeh Teac

Kondisi: bekas, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 10/2003, lebar total: 2.470 mm, suspensi: udara, ukuran ban: 385/65R22.5, Tahun pembuatan: 2003, Perlengkapan: ABS,

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), de-tiefziehmaschine-ad-kuehlaggregat-2027 Lsdpsy Igc Uofx Ah Teac

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, We have a W+D (Buhrs ITM) BB700 16K S1 servo inserting system, year of manufacture 2011, available! The condition of this machine is very good, as it has always received necessary maintenance and has only processed 21 million inserts. The machine is fully prepared for integration with a Mueller Apparatebau or KERN transactional system channel for feeding/reading/collating/folding A4 documents. In this configuration, we can also offer a used Mueller channel equipped for continuous processing, complete with unwinder, cutter, and merger. This is optional and does not have to be purchased with the main machine, but it can be included if desired. Year of manufacture: 2011 Configuration: - 6-station base - 4x RF2 rotary feeders - 2x HF2 vacuum friction feeders - Divert bin 1 - On-edge stacking conveyor Laedpfowml S Ejx Ah Tsc Prepared for a Mueller Apparatebau or KERN transactional system channel for feeding/collating/folding A4 documents or continuous operation with cutter. Envelope formats: - min. 105 × 162 mm (C6/DL) - max. 250 × 353 mm (B4) Product formats: - min. 80 × 105 mm (A6) - max. 229 × 324 mm (C4) Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm paper 16,000 cycles per hour

Kondisi: baru, konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 04/2026, lebar total: 2.470 mm, tinggi total: 1.350 mm, suspensi: udara, ukuran ban: 385/65R22.5, warna: hitam, Tahun pembuatan: 2026,

Kondisi: baik (bekas), konfigurasi gandar: 3 gardan, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 07/2017, lebar total: 2.470 mm, tinggi total: 1.540 mm, suspensi: udara, ukuran ban: 385/65R22.5, warna: biru, Tahun pembuatan: 2017,

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), Dear customers! Our experience has shown that communication via email often leads to unnecessary delays. We would like to assist you quickly, and in our experience, a three-minute phone call is more effective than exchanging emails for three days. TSWi 30.20 Dry Spray Booth Dimensions: 3000 x 2000 mm (W x H) Fan integrated in the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 mm diameter Depth: 900 mm Laedpfofr T Emox Ah Toc Double Filtration: Paper filter + Paintstop filter mat with clamping bar (+180 EUR net) Optional / Surcharge for: Transition piece square to round: 150 EUR net Clamping bar for Paintstop filter mat: 180 EUR net Side baffle plates with hinges: 590 EUR net Images may differ from the actual product. We can also supply complete spray rooms with supply air unit, heat exchanger, supply air ceiling, ductwork, etc. Please feel free to contact us.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), Dear customers! Our experience has shown that communication via email often unnecessarily delays the process. We would like to help you quickly—it's usually better to have a three-minute phone call than to exchange emails over three days. TSWi 20.20 Dry Spray Booth Dimensions: 2000 x 2000 mm (W x H) Fan installed in the wall Airflow capacity: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 mm diameter Depth: 900 mm Dual filtration: Paper filter plus Paintstop filter mat with clamping bar (+150 EUR net) Options/additional cost for: Ledpefr T Eqsfx Ah Toac Adapter square to round: 150 EUR net Paintstop filter mat with clamping bar: 150 EUR net Side deflector plates with hinge: 590 EUR net Images may differ. We are also happy to offer complete spray booths with supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Just contact us.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), For extraction diameters from 120 to 700 mm. Please provide us with your required air volume flow, and we will select the right cyclone separator for your application. Various designs available: - Legs made from painted, square steel profiles - Rotary airlock valve and transition piece with inspection hatch - Inlet box with non-return flap - Tangential outlet with or without pressure relief area - Square outlet with or without pressure relief area - Acoustic insulation Of course, we also supply all necessary accessories, such as fans, extraction pipes, deflector hoods, etc. Operating principle: The contaminated air is fed tangentially into the upper cylindrical section, generating a rotating airflow. Under centrifugal force, the material is separated to the perimeter of the cyclone and discharged through the opening at the bottom. The cleaned air exits the cyclone via the centrally positioned outlet pipe at the top. Separation efficiency increases with higher feed velocity, but so do pressure losses and, consequently, energy consumption. It is therefore important to find a suitable compromise. We have developed a range of cyclones optimized for filtering large material quantities, making them ideal for the wood, paper, recycling, grain, and feed industries. Lodpoftb Ebjfx Ah Tsac Below, the cyclone with the appropriate size can be selected based on the air volume and a typical pressure drop of around 1000 Pa. Operating pressure +/- 5000 Pa.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), Dear Customers! Our experience has shown that communication via email tends to unnecessarily drag out the process. We would like to assist you quickly, and for that, a three-minute phone call is often more effective than three days of back-and-forth emailing. TSWa 20.20 Dry Spray Booth Dimensions: 2000 x 2000 mm (W x H) Fan unit installed above the wall + Adjustable-height fan Airflow rate: 7,200 m³/h Motor: 0.75 kW, explosion-proof (ATEX compliant) Exhaust duct: 500 mm diameter Depth: 900 mm The ducting should not exceed a total length of 3–4 meters. Ljdpfjfv Hiqjx Ah Teac Double filtration: Paper filter + Paintstop filter mat with tensioning rail (+150 EUR net) Options/surcharges: Paintstop filter mat with tensioning rail: 150 EUR net Side baffles with hinges: 590 EUR net Images may differ. We are also happy to offer complete spray booths, including supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Feel free to contact us.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), Paint booth on castors Plug-and-play 230 V Motor power: 1.1 kW Airflow: 2,500 m³/h Dimensions: 1200 x 1200 mm (W x H) Ledpfxefuhu As Ah Tsac Hose connection (rear underside): 250 mm Double filtration system: paper filter and Paintstop filter mat Spray booth, paint booth, overspray extraction wall, dry spray wall, spray extraction wall, paint extraction wall

Kondisi: diremajakan ulang (bekas), Dear customers! Our experience has shown that communication via email usually causes unnecessary delays. We want to assist you quickly, and a three-minute phone call is much more effective than exchanging emails for three days. TSWc 20.20 Dry Spray Booth Dimensions: 2000 x 2000 mm (W x H) + Fan in upper section Air flow rate: 7,200 m³/h Laedpfsfn Ndcox Ah Tec Motor: 1.50 kW, explosion-proof Exhaust duct: 400 mm diameter Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat with clamping bar (+ €150 net) Options/additional costs for: Paintstop filter mat clamping bar: €150 net Side deflector plates with hinge: €590 net Images may differ. We are also pleased to offer you complete spray booths with supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Feel free to contact us.

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), dear-customers-our-experience-has-shown-that-communication-by-e- mail-usually-unnecessarily-drags-things-out-we-want-to-help-you-q uickly-and-its-better-to-talk-for-three-minutes-on-the-phone-than -to-send-e-mails-back-and-forth-for-three-days-tswc-30-20-dry-spr ay-booth-dimensions-3000-x-2000-mm-w-x-h-fan-mounted-at-the-top-a irflow-10-800-m3-h-motor-2-20-kw-explosion-proof-exhaust-duct-500 -mm-diameter-depth-900-mm-double-filtration-paper-filter-paintsto p-filter-mat-with-clamping-rail-180-eur-net-extra-options-additio nal-costs-paintstop-filter-mat-with-clamping-rail-180-eur-net-sid e-baffles-with-hinges-590-eur-net-photos-may-vary-we-also-offer-c omplete-spray-rooms-with-supply-air-system-heat-exchanger-supply- air-ceiling-piping-etc-just-contact-us Lodofn Nddspfx Ah Tjac

Kondisi: baik (bekas), GT70A001_de Ljdpfx Ahjcb T R Ho Tjac

Kondisi: sangat baik (bekas), konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 03/2013, lebar total: 2.470 mm, tinggi total: 1.520 mm, warna: hitam, Tahun pembuatan: 2013, Perlengkapan: ABS,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, kapasitas pendinginan: 2.300 kW (3.127,13 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, tegangan masuk: 400 V, tekanan: 9 batang, suhu: 110 °C, arus masuk: 29 A, berat kosong: 1.210 kg, suhu operasional: 110 °C, kapasitas tangki: 228 l, frekuensi input: 50 Hz, tekanan (maks.): 9 batang, Drycooler CIAT, Deskripsi - DPERA DLN9064-sSHF1050E9B 12A1 Nomor seri - 03399118/0002 Nomor produk - 7278227.612105 PED 2014/68/UE (DN) - ART1.2.F-LIQ-GR2(DN: 80) Laodpfjywgvmex Ah Tec Tersedia dua dry cooler serupa.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, produsen pengendali: PFEIFER technology, jenis laser: laser serat, daya laser: 6.000 W, panjang gelombang laser: 1.064 nm, Diameter pipa (maks.): 160 mm, Panjang pipa (maks.): 7.500 mm, panjang meja: 6.500 mm, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 13 batang, berat keseluruhan: 5.500 kg, panjang total: 14.800 mm, lebar total: 2.900 mm, tinggi total: 2.525 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, jangkauan kerja: 7.500 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15 – 160 mm with Bevel Cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser Fiber Laser Metal Cutting for rapid material changeover with up to 6kW – ideal for your production – is the smart and efficient tube laser processing solution. Laser cutting for round tubes, square tubes, rectangular tubes, open profiles, and special profiles: a laser machine ensuring maximum productivity during product changes. The challenge: fiber laser power up to 6kW for a wide range of metalworking tasks! Unmatched Laser Cutting Performance High axis speeds and acceleration, paired with a robust mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production – compact, simply smart. Ingenious solutions, 100% made in Saxony! Tubes and Profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology Laedpfoyh A Nyox Ah Tjc The semi-automatic six-position profile and tube loading chain system permits rapid job changeovers. With the optional bundle loader, you work independently. The Bevel Cut A feature that changes everything. With our machine's ability to pivot its cutting head on an additional fifth axis—even up to 50°—a major challenge in modern profile machining has been solved. If the laser beam always meets the tube perpendicular, this leads to an elliptical cutting edge. With the ability to pivot the tube laser cutting head, together with the feed axis, truly angled cuts can now be achieved. Of course, you can be fully confident when working with the skyTUBE Laser! The skyTUBE Pro is a Class 1 laser system: there is no risk of exposure to laser emissions or reflections during operation. For all our laser machines, nothing is more important than complete safety and adherence to the highest standards and regulations. Technical Specifications: · Enclosed industrial housing, laser class 1 (or 4 if requested) · Processing range, tube cutting system / clamping system: regular tubes from 15 mm to 160 mm, rectangular tubes 15 x 15 – 110 mm · Processing area on tube: X 6500 / Y ±100 / Z 150 / A ±360° / U ±50° · Automatic material feeding up to 6 x 160 mm profiles, 3500 – 7000 mm · Automatic material unloading system for profile sections, design tailored to profile length · Drive system Z: Ball screw axis system / with PTI SVZ system · Drive system X/Y: Linear axis system / with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min / 1.4G depending on material and laser combination · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Max. footprint dimensions (WxDxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cut length, with the standard system featuring max. 4.5 m automatic unloading, resulting in a total length approx. 14,800 mm

Kondisi: bekas,