Beli Mesin Pelubang & Pembengkok bekas (77.624)

Kondisi: baru, Tahun pembuatan: 2026, jumlah rol: 3, diameter poros: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjusted - Three rolls driven - 2 digital readouts - Brake motor - Can be used horizontally/vertically - Mobile control panel Nljdjucqqujpfx Alksa - Emergency stop - Documentation - 400V

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit Nsdpfx Aod E A I Iolkela - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: bekas, Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC Type BAH 1-2 KOTTMANN und BERGER GmbH Serial No.: Year of manufacture: For simultaneous bending of two steel tube sections up to Ø 12 mm Maximum bending angle: 90° Maximum tube diameter: 12 mm Mandrel length: approx. 65 mm Rated power: 3.5 kW Compressed air: max. 6 bar / approx. 1 liter per bending cycle Njdspu R Nvjpfx Alksla Power supply: 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine supplied without bending tools and without tool storage pin 25 x 183 mm - Only 1 bending mandrel included (see pictures). Installation dimensions (L x W x H): 1000 x 1000 x 1500 mm Weight: 390 kg Good condition.

Kondisi: bekas, 12-piece die block for GEWA press brake Press brake tool, lower die Type: 0255/14 Prism size: 16 mm for 90° Prism angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing capacity per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition Nsdpfx Alswbvmiekela

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: Beckhoff CNC PC control Nodpfxjxzubvj Alkela Technical Specifications: Maximum tube diameter x wall thickness: 80 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube center: 25 mm Maximum bending radius to tube center: 240 + 50 mm Maximum bending angle: 180° Maximum tube feeding length: 1000 mm Bending direction: Right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube turning and reversing unit - Electric mandrel bending device - Pneumatic mandrel bar safety system - Beckhoff PC control - Automatic central block lubrication - Laser scanner, safety enclosure Machine needs repair: The planetary gearbox of the transport carriage is defective and needs replacement. Spare part costs according to quotation (excluding installation): - Planetary gearbox: EUR 1674 - Gearbox flange: EUR 1850 - Pinion: EUR 850 - Plus VAT Cheap sale in as-is condition. Immediate availability including free loading onto truck.

Kondisi: baru, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Weight approx.: 14,400 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position Nljdpfoh Alh Hox Alkja - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Kondisi: baru, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15VWL1032, The machine comes with tooling for producing electrical connectors in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 The offer also includes original MSA drawings. The VWL 1200 is a vertical three-axis CNC machine for the placement of electrofusion fittings, designed for handling medium to large-sized fittings or pipes. The machine can typically produce fittings within an internal diameter range of 250 to 1400 mm (1400 mm SDR17). Optionally, a 2-axis CNC drilling unit is available for drilling fusion indicator holes during the wire laying cycle or for drilling terminal holes during the external profiling cycle. Nljdsu Itk Ropfx Alkea The VWL 1200 uses specialized fixtures that clamp onto an innovative element, which is an integral part of the coupling's structure; thus, each half of the coupling has a separate melting zone. The wire laying process starts at one terminal at the end of the coupling. The wire is laid at double the required pitch to the end of the fusion zone, after which the tool system rotates and then moves in the opposite direction between the first laid pitch up to the rest position at the second terminal. The process is completed in the second part of the coupling. The VWL 1200 system is designed to enable loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine features a completely open top, allowing for easy overhead loading via a gantry system. Alternatively, parts can be loaded through the exceptionally wide operator door using appropriate gripping and handling equipment.

Tahun pembuatan: 2015, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, automated-production-plant-for-sdr-11-and-sdr-17-pipe-bends-pate nted-bending-system-in-which-the-pipe-ends-are-inserted-into-the- bend-radius-during-bending-this-reduces-the-reduction-of-the-oute r-wall-of-the-pipe-during-bending-and-therefore-reduces-costly-ma terial-additions-to-compensate-for-wall-thickness-loss-pipe-bends -can-be-manufactured-with-a-final-bending-angle-of-90-variable-be nding-angle-adjustment-simultaneous-heating-of-the-bending-blank- in-a-radiator-field-rotation-of-the-bending-blanks-during-heating -for-homogeneous-heating-the-ends-are-not-heated-so-their-geometr y-remains-unchanged-the-pipe-bend-can-therefore-be-further-proces sed-by-classical-butt-welding-automatic-transport-of-blanks-from- the-buffer-hopper-to-the-removal-of-finished-pipe-bends-depending -on-customer-requirements-siemens-plc-control-system-with-touch-u ser-interface Nledsu Itlnspfx Alkea

Kondisi: sangat baik (bekas), Very good condition. Nljdpfxsytc Nae Alkoa

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, daya laser: 2.700 W, X traverse max.: 2500 mm Y traverse max.: 1250 mm Control unit: Rexroth IndraMotion MTX (base version) Laser power: 2,700 watts Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guideway for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Drives with maintenance-free three-phase motors - Repositioning unit with programmable hold-down device - Foot switch for clamp closing - Positioning pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for part ejection - Two finished parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - Laser TruFlow 2000 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control unit - Enclosed beam guide - Fine-filtered compressed air for beam guidance ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable stripper with manually adjustable stripping force - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of filling level height in the punching console - Level monitoring for thread forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - 17" touch-screen operating panel - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Auto-off mode incl. wake-up function - Program management - Production schedule Data Transmission - Network connection (RJ45) and USB interface Safety - CE marking - Dual-beam light barriers - Monitoring system for, among others, gas pressure, temperature and coolant - Emergency stop - Protection against stray radiation - Compact fume extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting bin + Roll technology functions: knurling, deburring, offsetting, beading, slitting + Spray lubrication for dies + Air blast device for small parts + 1 additional clamp + Smart Punch Monitoring (punch break detection) + Vibration-damped installation + Repositioning cylinder + Warp detection + Parts conveyor (punching area) + Parts conveyor (laser area) + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) Nledjylk U Iopfx Alkoa + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, daya laser: 4.000 W, Max. working area X: 3050 mm Max. working area Y: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 21 tool stations and 4 clamps - Drives with maintenance-free three-phase motors - Rerun device with programmable hold-down - Foot switch for closing clamps - 2 containers for good parts - Automatic shut-off Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes Nljdpfxjylk Nxj Alksa - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable hold-down force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Bulge detection - Flap for punched parts 500 x 500 mm - Monitoring of fill level height in the punching console Control - Open control system based on Bosch Rexroth IndraMotion MTX - Operator panel with 15" TFT touchscreen - Program management and 80 GB storage space - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Multibeam light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown hydraulics - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-damped installation - Thread forming function - MultiTool function - Chip conveyor with tilting bin - Active die - Ejection unit for small parts - Brush tables with loading aid - Marking function - Rerun cylinder - Bulge detection

Kondisi: bekas, Tahun pembuatan: 1971, de-hu-001 Nsdpfx Asyt Rz Djlkola

Kondisi: baru, Zustand neu Lieferzeit ca. 4 Wochen ab Auftragse Ursprungsland Italien Preis 20960 € Leasingrate 402.43 € Presskraft 40 to Hub 250 mm Max. Biegekapazität - Baustahl 200 x 20 mm Tisch 1100 x 620 mm Bolzendurchmesser 55 mm Arbeitsgeschwindigkeit 4,7 - 9,1 mm/s Rückzugsgeschwindigkeit 45 mm/s Öltank 45 l Motor 3 kW Arbeitshöhe 950 mm Nedpfx Aljxh Rulekjla Länge 1250 mm Breite 900 mm Höhe 1000 mm Gewicht 750 kg 2 Aufnahmebolzen, Höhe 110 mm (höhere auf Anfrage) Manueller Anschlag 500 mm mit Milimeterskala Einstellbare Geschwindigkeit 2 Handräder für die Einstellung des Hubes und des Rückzugspunktes Präzise hydraulische Hubverstellung auch unter Druck 2-Hand Bedienung Große Auswahl an Werkzeugen, Preise auf Anfrage ALTERNATIVE: Variante mit CNC Steuerung

Kondisi: bekas, Tahun pembuatan: 2013, Alberti Vector B/CN is a vertical coordinate boring machine designed for precise drilling and machining of flat materials. The machine features continuous feed of the workpiece with the possibility of automatic loading and movement along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operations. Optimized work cycles enable efficient drilling, milling, and handling of workpieces. The combination of multiple spindles, independent vertical units, and the possibility to use a saw make this machine a universal solution for the furniture and woodworking industry. Technical data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Machinable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 pcs, spacing 32 mm Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Extraction air speed: 30 m/s Chip extraction capacity: 5000 m³/h Nlodpfx Asxgfg Tjlkea Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, BAIER Geba 46/A Mesin Embos dan Punching, Tahun Pembuatan 1997 berfungsi penuh - dua unit punching - pemotong geotin - dokumen manual pengoperasian lebar material maks: 250 mm Nlsdpfxoyt Igwe Alkja lebar punching maks: 240 mm daya pemanas: 2200 W gaya emboss: 100 kN

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), de_001 Nlodeyttwbopfx Alkja

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Unit bor penggerek AYEN Unit bor penggerek elektro-pneumatik Nodpfoqv Ey Uex Alkjla berbagai tipe 2 unit RPM 1C, 0,73 kW - masing-masing €450 1 unit RPM 0,5C, 0,37 kW - €400

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1996, For sale: IXION Deep Hole Drilling Machine TL 601 Njdpeh Dpv Rjfx Alkjla Please note: The machine currently has electrical issues. The machine constants need to be reloaded by a technician and the buffer battery should be replaced. A new LCD display (LED) was recently installed. Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travels- + Quill TL 601 (Z): 600 mm + Drilling unit vertical (Y): 300 mm + Table transverse (Table surface 1200 mm x 600 mm) (X): 700 mm + Drilling direction (W): 1000 mm -Clamping Table- + Standard table surface: 1200 mm x 600 mm + Table load (T1200): 1000 kg -Tool holder- + Mount: SK 40 as per DIN + Drawbar: 69871 as per DIN 69872 -AC Main spindle drive 3.0 kW- + At 100% duty cycle, S1: 5.5 kW + At 50% duty cycle, S6: 7.5 kW + Spindle speed, directly programmable: 100–4000 rpm -Performance- + Drilling capacity in steel 2312: D 32 mm + Tapping: M24 -Weight / Dimensions- Weight: 2500 kg Length approx.: 4230 mm Width approx.: 1885 mm Height approx.: 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machinery purchase / sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE Are you looking for a high-quality yet affordable metalworking machine for your manufacturing? Or do you want to sell yours?

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Diameter pipa 28 mm Tebal dinding 2 mm Nsdpfxoxcuhro Alkola Radius tekuk minimum 90 mm Kontrol 3D TubeSoft Slim Kebutuhan daya total 3,5 kW Harga baru saat ini ~ 75.000 EURO

Kondisi: baru, Angle iron/leg length / mm Double-T iron over X-axis / mm Nljdpjyk Im Ejfx Alkoa U-channel over X-axis / mm Total power requirement 4/380 kW Machine weight approx. 1,645 kg Space requirement approx. 1,500 x 1,000 x 1,400 mm The Gerd Wolff HPK-80 is a hydraulic section and tube bending machine with 3 rollers. The machine is ideally suited for bending profiles, pipes, and similar materials. Model: HPK 80 Upper roller diameter: Ø 80 mm Lower roller diameter: Ø 70 mm Roller diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1,500 x 1,000 x 1,400 mm Weight: 1,645 kg Standard equipment Welded steel construction 3 driven rollers Hardened and ground shafts made from high-strength special steel Hardened and ground rollers Horizontal and vertical working positions Hardened standard rollers Mobile control panel Mechanical side guide rollers with 3 axes Brake motor for precise bending Digital displays (2 units) Optional features Pipe, profile, and square bending rollers Hydraulic side guide rollers (2 axes) Automation with NC control

Kondisi: baru, I-beam - upright 120 x 25 (ø 1600) mm Raw diameter max. 140 x 3 (ø 3000) mm Angle steel 100x100x10 (ø 1600) mm Square material 140 x 40 x 3 (ø 4000) mm I-beam - flat 200 x 35 (ø 1000) mm Solid material – diameter 70.0 (ø 800) mm Tool holder 100.0 mm Roller diameter 315 mm Speed 5.4 m/min Total power requirement 11.0 kW Weight 2,240 kg Dimensions L-W-H 1500 x 1650 x 2100 mm Equipment: - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower/side rollers * Designed for extra small bending radii - Individually adjustable lower/side roller - 3x powered rollers - Split roller segments - Digital position display for lower/side rollers * Display with touch screen function - Hardened tool holder (42CrMo4) - Machine base frame - 2x hydraulically adjustable side guides Njdpfxjxcukys Alkjla - Horizontal and vertical operation possible - Freely movable control panel - Manometer / pressure gauge for the rollers - CE mark / Declaration of Conformity - Operating manual in German

Kondisi: baru, de-hu-001 Nlsdpfexcukgex Alkoa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Data Teknis: Lebar kerja: 3100 mm Kapasitas pembengkokan: 16,0 mm Nljdsytr Rmepfx Alkea Pembengkokan minimum: 12,0 mm Diameter rol atas: 310 mm Diameter rol tengah: 320 mm Diameter rol samping: 240 mm Perangkat pembengkok kerucut melalui kemiringan kedua rol samping Rol dikeraskan Panel kontrol bergerak dengan tampilan digital Daya motor: 15 kW Tanda CE Dimensi (Panjang x Lebar x Tinggi): kira-kira 5100 x 2100 x 1800 mm Berat: sekitar 12,5 ton Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Mesin sesuai kondisi optik, teknis, dan keausan sesuai usianya; mesin bekas dijual tanpa jaminan apapun.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Pipe diameter 10.0 - 42.0 mm steel Wall thickness 3.0 mm steel Pipe diameter 54.0 mm CU/Alu Solid material - diameter 30.0 mm Wall thickness 2.0 mm Revolutions per minute 1.30 rpm Voltage 400 Volt Total power requirement 1.5 kW Weight 110 kg Dimensions (LxWxH) 400 x 450 x 570 mm Exhibition machine - LIKE NEW Never been used (!!) Special price on request - Steel pipe capacity 42.0 x 3.56 mm - Gas pipe capacity 1"1/4 gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius 200 mm - Minimum radius 2 x D - 6-sided tool holder - Min. outer diameter 5 mm - 1/8" gas Nodpoxab Hvjfx Alkjla Features: - Patented quick-change tooling system - One bending speed - Digital machine display - 1x hands-free footswitch - 1x bending tool set included * For tube Ø 25 mm / radius 100 * More segments available on request (surcharge applies) * Tool holder ERCOLINA

Kondisi: baru, Tahun pembuatan: 2026, Pipe diameter 10.0 - 60.0 mm steel Wall thickness 3.0 mm steel Pipe diameter 64.0 mm CU/Alu Wall thickness 4.0 mm Revolutions per minute 1.25 - 2.50 rpm Solid material - diameter 35.0 mm Voltage 400 volts Control ISITAN NC Total power requirement 2.0 kW Weight 140 kg Dimensions (L-W-H) 380 x 900 x 600 mm Demonstration machine - like NEW Nsdpfx Aljxabu Hskela Never been in use (!!) Special price on request - Capacity steel tube 60.0 x 3.0 mm - Capacity gas pipe 2" gas x 3.91 mm - Capacity box section (FE 42) 60 x 30 x 4.0 mm - Max. bending radius 200 mm - Minimum radius 2 x D - Hexagonal tool holder - Min. outside diameter 5 mm - 1/8" gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick-change tool system - Infinitely variable adjustment of bending speed - One bending speed - 1x freely movable foot switch - 1x bending tool set included * for pipe Ø 38 mm / radius 155 * Additional segments available on request at extra charge * Tool holder ERCOLINA