Beli Omga Gergaji Potong Omga V 235 Tahun 1989 bekas (45.202)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Diameter maksimum mata gergaji: 400 mm Tampilan sudut digital dalam derajat (+/- 46 derajat) Cgsdpfxexx Hwws Akaeu 2 x penjepit pneumatik Injeksi mata gergaji hidraulis Daya mesin: 1,8 kW Layar digital dengan layar sentuh Pemindai barcode genggam Meja masuk 6000 mm dengan penekan digital Meja keluar manual 4000 mm dengan rol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Two saws 2.2 kW motors Maximum cutting width: 240 cm Codpfx Ajha Nchekasgu Height: 10 cm Very good condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Disc diameter 50 mm 7.5 kW motor 3 sorters Feeder length: 4 m Receiver conveyor length: 6 m Cgsdpfxsuxnpcj Akaeu Cutting cross-section: 300x100

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Double miter saw STRIFFLER Codpjibyknofx Akajgu Cutting length 2.2 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 1999, Produsen REMA Cjdpfxoxn A N Uo Akaogu Model / tipe mesin DMRT 300 Tahun produksi 1999 Kategori mesin Gergaji Potong Lokasi: Gorzów Wlkp. Syarat pengiriman: Pengambilan pribadi

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), Walter double saw with TRKS 200 feeder Csdpfx Akjh R Tvtsaegu cutting height of the double saw: 200 mm, motor power: 40 kW. Chain feeder with controllers and adjustable prism for various diameters. Gearbox for adjustable feed rate.

Kondisi: sangat baik (bekas), Optimizing cross-cut system GreCon Type 2004 with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec Saw motor: 5.5 kW Saw spindle control: Pneumatic Chain drive: Servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Has been completely overhauled and not used since Cgsdpfx Aen Hwl Askaju Location: Austria, near Ried im Innkreis

Kondisi: bekas, Tahun pembuatan: 2008, Fully equipped with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth Flat tooth negative for aluminum cuts Used, excellent condition, little use Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE type-tested Codpeww Nd Tefx Akaegu Motor: 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Swivels to the right Swivels to the left Machine base frame Right roller table 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Left roller table 5000 mm, Type RO Feed brake Aluminum material infeed Coolant spray unit 2 x pneumatic workpiece clamps right + left Pressure reducer valve New price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or guarantee

Kondisi: bekas, cleaned, partially overhauled, with new support plate used, good condition Cgedow En Igepfx Akaeu Manufacturer: Graule Model: ZS 85 N GS-certified Motor: 2.5 kW, 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm pivotable to the right pivotable to the left tiltable up to 45° Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without guarantee or warranty

Kondisi: bekas, Tahun pembuatan: 1986, including 2 saw blades (negative tooth form) Used, in good condition Manufacturer: Graule Model: ZS 85 N Year of manufacture: 1986 Motor: 2.2 kW Cutting height: approx. 85 mm Cutting length: approx. 380 mm Blade diameter: approx. 300 mm Saw blade bore: approx. 40 mm Swivels right up to 45° Swivels left up to 45° Tiltable Machine base frame Feed brake Material stop made of aluminum-steel Original price approx. €5,000.00 with accessories Extraction connection: Ø 80 mm Cgedpfx Akovwfg Esaeu Weight: approx. 150 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without any warranty or guarantee

Kondisi: baru, en-5651500-product-description Cedpfxsvwfluj Akaogu

Kondisi: bekas, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideally suited for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 ——— Technical Data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg ——— Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet via freight forwarder possible at short notice ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Csdpsxiza Usfx Akaegu

Tahun pembuatan: 2007, Kondisi: bekas, Fungsionalitas: belum diuji, Elumatec MGS 105/01 gergaji mitra kepala tunggal dengan sistem pemotongan panjang, tampilan digital E111, kontrol E555, konveyor roller masuk dan keluar, nomor seri 1050126588 (tahun produksi disarankan 2007) Barang ini berlokasi di Farnworth, Bolton. Pengambilan harus dilakukan pada hari Selasa, 3 Maret 2026. Cjdpfjyg Rfcox Akaegu

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 1 new mobile Holtec package cross-cut saw KAPPSTAR HF122 robust all-rounder for sawn timber and round timber for cross-cutting and trimming cuts Cedpfx Ajh Imu Dskajgu Package cross-sections up to 1.30 m x 1.30 m Round timber diameter up to 1.60 m Electric motor 11 kW STIHL pointed tooth chain for cross-cutting sawn timber or STIHL planing tooth chain for cross-cutting round timber Double-sided stellite-tipped guide bar (can be rotated four ways) Bar length: 1.90 m 400V, 50 Hz 1 year warranty

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, new mobile package cross-cut saw Holtec Piccolo Ideal for trimming and cross-cutting sawn timber packages Cgsdpfsh Imuvjx Akasu Chain assembly with STIHL Rapid Super 0.404" chain for extremely fine surfaces and double-sided stellite-tipped guide bars (can be rotated four times) Electric motor 5.5 kW High cutting capacity for packages up to 1.10 m x 1.10 m and log diameters up to 1.30 m Bar length: 1.60 m 400V, 50 Hz 1-year warranty Available immediately from stock

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 1997, connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-side roller conveyor with stop, cutting length: 3200 mm, left-side roller conveyor with stop, cutting length: 2200 mm Cedpfx Akjwhn T Ujasgu

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: 2024/121/47, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 420 mm, GRAULE cross-cut and mitre circular saw Model ZS 170 N (tiltable) 400 V three-phase brake motor, 2.2 kW Saw blade diameter: 420 mm Cgsdpfx Astwz Tlskaeu Saw blade bore: 40 mm Cutting height: 170 mm Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. Machine, tilt-adjustable on both sides from the rear via hand crank, from 90° to the left up to 45°, and to the right by approx. 30° (up to approx. 60°) 1 pc. Carbide-tipped circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. Machine stand

Tahun pembuatan: 2024, Kondisi: baru, - 6,000 mm cutting length Cgedpfx Ajpfcgaekaeu - Minimum cutting length: 600 mm - 5 saw carriages - Cutting height: 80 – 140 mm - 4 kW saw motor - 1.5 kW stepless feed, 10–30 m/min Optional: - Disposal conveyor belts

Kondisi: diremaj di bengkel (bekas), - 150 mm cutting height - 500 mm cutting depth Cgjdpfxsvkf Naj Akaeu - pneumatic saw stroke - 2 pieces of roller conveyors, each approx. 4,000 mm long - 500 mm roller width - 3 adjustable length stops

Kondisi: diremaj di bengkel (bekas), - Paul Kapp Saw 17 AP Cedovkfuijpfx Akaogu - Pneumatic saw feed - 150 mm cutting height - 400 mm max. cutting width - 2 non-driven roller conveyors, each 2,000 mm long

Kondisi: bekas, - 2250 mm lebar potong Cgedpfx Akohkm A Njaeu - 80 mm tinggi potong - 2x 3,7 KW motor gergaji

Kondisi: diremaj di bengkel (bekas), - Mesin gergaji potong Paul 15 AO - Gerakan potongan gergaji hidraulik - 150 mm tinggi potong - 500 mm lebar potong maksimum - 1 konveyor rol tidak digerakkan sepanjang kira-kira 1.600 mm Cgsdpow Slgfsfx Akaju

Kondisi: bekas, Tahun pembuatan: 2000, dengan stopper otomatis Stopper secara otomatis menggeser material potong ke posisi pemotongan sesuai pengaturan ukuran Mata gergaji: bergerak dari bawah Diameter maksimum mata gergaji (mm): 300 Codpfx Asx Srrvjkaogu Meja sisi kanan panjang: dengan stopper yang dapat bergerak otomatis Panjang meja (mm): 3200 Lebar meja (mm): 120 Konveyor rol kiri: panjang konveyor rol - 3550 mm, lebar konveyor rol - 310 mm Lebar rol (mm): 240 Konveyor rol dan meja stopper: tidak dapat dipisahkan Berat mesin (kg): 80 tanpa sistem ekstraksi yang digambarkan

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: diverse, The professional for cross-cutting, mitre, and compound angled cuts The ZS 200 N is optimally suited for cross-cutting, mitre, and compound angled cuts. Materials such as wood, PVC, and aluminium profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally in both directions for mitre cuts. The N stands for 'Neigung' (tilting) and indicates that the saw unit can also be tilted vertically to either side, allowing for compound angled cuts without issue. ZS 200 N Facts at a Glance: - Cross-cut and mitre circular saw with a maximum cutting height of 200 mm - Sturdy grey cast iron construction - Precise ball bearing guidance of the saw carriage on hardened and ground steel shafts - Manual feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Adjustable fixed stops - Lower blade guard - Can be connected to an extraction system - Saw pivots to either side from the front - Hydraulic feed brake Technical Details: - Motor: 400 V / 5.0 kW - Speed: 2,800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Horizontal mitre range: 45°-90°-25° - Vertical mitre range: 60°-90°-30° - Saw blade diameter: 520 mm Cedpfxeh Nu Iue Akasgu - Weight: 310 kg Scope of Delivery: - ZS 200 N cross-cut and compound saw - Machine stand - Machine pivots to either side from the front - Hydraulic feed brake - Carbide-tipped saw blade HM Z 60, negative teeth - Operating tools and hand crank

Kondisi: baru, Tahun pembuatan: 2026, Mobile cross-cutting station featuring an extremely robust base frame, fully assembled and ready for operation. Cgjdpfx Aksb Nrg Ujaeu Included special equipment: - Machine tiltable on both sides from the front - Hydraulic feed brake - Circular saw blade HM 520x50 Z60 W, negative tooth - Mobile base frame, exceptionally stable Machine specifications: - Constant zero-point ensures excellent suitability for use with measuring devices and stop systems (for miter and tilt cuts!) - Powerful three-phase motor, 5 kW with automatic star-delta start - Stable guide arm with 4 linear ball bearings for precise and safe feed movement - Swivels left 45° (miter) - Swivels right 65° (miter) - Tilts left 60°, right 30° - Cutting width at 90°: 420 mm - Cutting width at 45° miter: 295 mm - Cutting height vertical: 200 mm - Cutting height at 45° tilt: 140 mm - Cutting height at 60° tilt: 80 mm - For saw blade 520x50 mm - Extraction nozzle: 100 mm - Weight with stand: 300 kg - CE and GS certified, dust-tested - Quality product made in Germany Base frame data: Extremely sturdy frame construction made from large-dimensioned profiles, powder-coated, robust load-bearing steel rollers, ball-bearing mounted with high wall thickness, galvanized. Heavy-duty double-stop swivel castors with PU tread, effortless to move. Roller width: 450 mm Supports individually adjustable via threaded spindles Roller conveyor 1500 mm per side Stop length 2750 mm per side Total length: 5990 mm Strongly ribbed stop profile 100x50 mm, anodised aluminium (extendable as an option) 1 folding stop left and right Measuring tape left and right Shipping available for an additional fee. We only ship within the EU. No shipping outside the EU.