Beli Penguji Pembubaran bekas (3.384)

Kondisi: baik (bekas), Produsen: WMW WPM Mesin Penguji Material Leipzig Tahun pembuatan: Tipe: Metode pengujian: Diameter meja: 200 mm Diameter landasan: 100 mm Jangkauan: mm Lredjy Hka Uspfx Aptsn Tinggi pengujian: 300 mm Diameter spindel: 50 mm Tekanan uji: 15,5 hingga 250 kg Aksesori: Berat: 130 kg Luas tempat: 500 x 200 mm Dimensi: 500 x 300 x 730 mm Kondisi: baik

Kondisi: bekas, Elastomer Test Stand BIA Turnkey Test Systems Hexapod Item No.: PT-065 Designation: Elastomer Test Stand Manufacturer: BIA Turnkey Test Systems Description: Test stand for determining and analyzing mount characteristic curves and values at vehicle operating points mount characteristic curves and values at operating points under specified temperature conditions mount behavior under operational loading (compression set, change in characteristic curves) functional noises at operating points on elastomer mounts in the chassis/drivetrain area Test specimens are clamped between an upper fixed plate and a lower mobile plate. The mobile plate is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows the distance between the two plates to be adjusted, enabling a wide variety of test specimens and fixtures to be clamped. Degrees of freedom Amplitude Speeds Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder is fitted with two parallel servo valves (38 l/min). Lrjdpfx Apswhdnhetsn The six cylinders drive the mobile plate via six connecting rods. The connecting rods are equipped with a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear Actuator: The distance between the upper and lower plates can be adjusted by means of a linear actuator. The actuator consists of an electric motor, a gearbox, and a leadscrew system. The linear actuator is fitted with an absolute encoder, which is mounted on the gearbox input shaft. Hydraulic Actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, binder-kb-720-refrigerated-incubator-with-p-plus-package-eucar-5 -battery-test-chamber-co2-extinguishing-system-device-description -for-sale-is-a-binder-kb-720-e6-refrigerated-incubator-year-2022- equipped-with-the-extended-safety-and-performance-test-package-p- plus-this-unit-is-not-a-standard-lab-incubator-but-a-premium-safe ty-test-chamber-specifically-designed-for-aging-performance-and-s afety-testing-of-lithium-ion-energy-storage-systems-the-unit-is-f ully-functional-and-has-been-tested-it-originally-had-transport-d amage-to-the-housing-which-has-been-professionally-repaired-and-r epainted-technically-in-excellent-condition-visually-very-good-co ndition-100-operational-no-limitations-price-advantage-1000-euros -cheaper-than-a-comparable-device-key-added-value-this-chamber-is -designed-to-safely-detect-monitor-and-contain-critical-battery-e vents-up-to-eucar-hazard-level-5-fire-flames-no-explosion-what-ca n-this-device-do-section-2-performance-application-aging-tests-on -lithium-ion-cells-performance-tests-charging-discharging-cycles- under-temperature-continuous-temperature-testing-and-temperature- cycling-tests-of-powered-and-cyclically-powered-cells-reproducibl e-precise-temperature-control-throughout-the-chamber-safe-executi on-of-tests-under-realistic-thermal-conditions-test-environment-f or-r-d-automotive-e-mobility-and-energy-storage-technology-suited -for-battery-and-cell-manufacturers-research-and-development-labo ratories-test-laboratories-and-safety-testing-automotive-e-mobili ty-energy-storage-the-p-plus-package-transforms-the-kb-720-into-a -real-battery-safety-test-chamber-integrated-safety-features-auto matic-and-manual-co2-fire-suppression-system-fire-detector-with-v isual-and-audible-alarm-mechanical-double-door-locking-system-sec ure-containment-spark-protection-in-chamber-exhaust-connection-wi th-reversible-overpressure-flap-ports-for-external-inerting-e-g-n itrogen-emergency-stop-manual-fire-suppression-activation-ports-f or-charging-and-measurement-cables-result-the-device-is-suitable- for-testing-lithium-ion-cells-up-to-eucar-hazard-level-5-where-fi re-or-flames-may-occur-but-no-explosion-or-uncontrolled-propagati on-it-is-not-an-abuse-or-destruction-test-device-but-a-safe-stand ardized-test-chamber-for-real-operating-and-fault-scenarios-techn ical-data-temperature-range--10c-to-100c-internal-volume-approx-6 98-l-shelves-4-x-stainless-steel-max-load-per-shelf-45-kg-max-tot al-load-100-kg-electrical-data-mains-connection-200-240-v-ac-freq uency-50-60-hz-phase-single-phase-power-consumption-approx-2-1-kw -fuse-16-a-refrigerant-r134a-protection-ip-20-dimensions-weight-e xternal-w-x-h-x-d-approx-1250-x-1950-x-900-mm-internal-w-x-h-x-d- approx-970-x-1250-x-576-mm-in-brief-why-this-device-stands-out-tr ue-battery-safety-test-chamber-suitable-for-eucar-hazard-level-5- integrated-co2-extinguishing-system-large-chamber-approx-700-l-hi gh-market-and-resale-attractiveness-weight-approx-285-300-kg-docu ments-downloads-condition-used-scope-of-delivery-see-picture-spec ifications-and-technical-data-subject-to-change-and-errors-please -contact-us-by-phone-with-any-further-questions. Lredpfx Apjyyw E Retsn

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Lsdpfx Aed R Dpmsptjrn Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Displacement resolution:0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 10 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for “quick tests” to be performed without a PC. For tests that require data storage and graphical recording, our basic software enables both machine control and test evaluation. This allows you to create various test procedures and generate a test report. Additionally, you have the option to export raw data for further processing in your own applications. Optional features: - Delivery & commissioning - DAkkS or manufacturer calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear test devices, wedge grips, scissor grips, peel test grips, screw grips, pneumatic grips, and hydraulic grips.

Tahun pembuatan: 2025, Kondisi: baru, Universal testing machine PM50 Force: 50 kN Crosshead travel: 1200 mm Test area: 400 mm Ledpfx Apeydazuotorn Overall height: 1817 mm Weight: approx. 380 kg Displacement resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve tracing, the basic software enables both control and evaluation. This allows you to create various test sequences and generate a test report. Additionally, you can further process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Universal testing machine PM3 Force: 3 kN Crosshead stroke: 1200 mm Working depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Position resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Lrsdpfjyc U Rbjx Aptsn Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be carried out without a PC. For tests that require data storage and curve recording, our basic software enables both control and evaluation. This allows you to generate various test sequences and create a test report. You also have the option to further process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Clamping tools: compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Tahun pembuatan: 2025, Kondisi: baru, Universal testing machine PM50 Force: 50 kN Crosshead travel: 1200 mm Test area: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Displacement resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve tracing, the basic software enables both control and evaluation. This allows you to create various test sequences and generate a test report. Additionally, you can further process the raw data in your own programs. Optional: - Delivery & commissioning Lreded R Dp Eepfx Apton - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Tahun pembuatan: 2020, jam operasional: 6.126 h, Kondisi: sangat baik (bekas), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, 6126 operating hours. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This device is used for simulating temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance tests The chamber can generate both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). The precise control system allows for reproducible test conditions. Operation is user-friendly via an integrated touchscreen panel. Lsdpfx Asyxm Uloptsrn Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test area - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hour counter Technical Data: - Model: TempEvent T/1000/70/5 - Temperature range: approx. -70 °C to +180 °C - Temperature change rate: up to 5 K/min - High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding test processes requiring high repeatability. - Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) - External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) - Side pass-throughs: 50 cm / 125 cm Electrical Data: - 400 V / 3~ / 50 Hz - Rated current: approx. 34 A - Power: approx. 21 kW Refrigerants: - R449A (approx. 2.9 kg) - R23 (approx. 1.3 kg) Weight: approx. 1200 kg Buyer information for your safety! The following points are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. New refrigerant fill according to legal regulations, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and error!) If you have any further questions, please feel free to call us.

Kondisi: siap digunakan (bekas), Vötsch VCL 4003 Climate Chamber Test chamber capacity: 34 liters Weight: 110 kg Rated power: 1.8 kW Temperature range: -40 to +180 °C Further technical data can be found in the pictures. We were unable to fully test the device, as the touch screen switches off after some time. The device probably requires new software. Therefore, the unit is being sold as defective. You are welcome to arrange an appointment for inspection. We can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Lrjdpfxjxw Srqs Aptjn Subject to prior sale. Visit our shop and have a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the description of the item may occur and are reserved.

Kondisi: bekas, Table clamping surface: 228 x 273 mm Ljdpfxsbbgcxj Aptsrn 3 T-slots: 12 mm In between, 4 x 4 threaded holes: M8 Table height at zero position: 146 mm Required space: 250 x 290 mm Weight: 41 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter roda: 400 mm, berat keseluruhan: 4.000 kg, jarak antara pusat: 550 mm, kecepatan spindel (maks.): 3.000 rpm, model controller: Siemens 840 D, DETAIL TEKNIS Diameter roda maks.: 400 mm Diameter benda kerja: 36-400 mm Jarak sumbu: 135-290 mm Putaran maksimum spindle (tidak bertingkat): 3.000 rpm Jarak antar puncak: 100-550 mm DETAIL MESIN Kontrol: CNC Siemens 840 D Dimensi & Berat Kebutuhan ruang: sekitar 2.000 x 3.055 x 2.788 mm Berat mesin: sekitar 4.000 kg PERLENGKAPAN Pengujian gir dengan satu sisi kontak Pengujian gir dengan dua sisi kontak Pengujian getaran bodi Pengujian heli pada kontak dua sisi Dapat digunakan hingga 6 slide pengujian Akurasi dan repeatabilitas pengujian tertinggi Lrjdpjywg Hxefx Apton Meja mesin dengan penggerak benda kerja Unit pneumatik dapat diputar Sistem pelumasan semprotan (Tipe: Vogel) Ekstraksi kabut oli (Tipe: Elbaron)

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), de-to-hu-Werkstatt-Zahnradpruefgeraet Lredoy Ax Thepfx Aptjn

Kondisi: sangat baik (bekas), CTS Type: C-40/350 Lredpfex Ekupox Aptsn Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - approx. 3,500 W at +20°C - approx. 2,000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ +3.0% rel. humidity over time Technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation and without additional equipment. Options may influence performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: stainless steel, usable area 620 x 600 mm - Max. shelf load: 35 kg - Max. total load with full shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Plain text error messages - RS 232 interface - Ethernet interface - Free switching channels for user-side test item control Dimensions: - Test volume: 350 liters - Internal dimensions: height 750 mm × width 650 mm × depth 720 mm - External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating Data: - Power supply: 400V 3/N, 50 Hz - Nominal power: 7.1 kW - Nominal current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Kondisi: sangat baik (bekas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber used for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber enables you to evaluate the functionality or material properties of a test object under the influence of temperature and humidity. Optimal air distribution with a correspondingly high recirculation volume ensures efficient transfer onto the test items. The air conditioning compartment is located at the rear of the inner chamber. The system components are situated behind the unit in a separate frame, providing easy access. Controls are housed in a separate electrical cabinet. The operating panel is integrated into the cabinet door. Lredpfx Aex Eabpspten For humidity removal from the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be supplied to the chamber via a blower system. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test specimen and radiant heat, measured in supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity * Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1 - ±3% r.h. All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without heat irradiation, and without additional equipment. Dimensions: Internal Chamber/Test Area: - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm; Width: 1,600 mm; Depth: 1,550 mm External Dimensions: - Height: 2,800 mm; Width: 2,250 mm; Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power consumption: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: Refrigeration Unit: - Water-cooled, low noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection possible by arrangement (46325 Borken) - Shipping via freight forwarder available – costs & arrangements upon request - Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved.) We are happy to answer any further questions via telephone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) Lredpfox Eaxbox Apten (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. Lrsdpex D Abpsfx Apten The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Ledpfovb Hansx Aptjrn Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Ledsvb E Uqepfx Aptsrn Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: +5°C to +45°C for temperature testing Test chamber volume: approx. 1300 L Simpac control system Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on modular construction. Individual modules can be added or replaced as required, allowing customization for different applications. They are suitable for plants with high light requirements such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Fresh air supply up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH: approx. 0.8 kW Performance data for climate testing under irradiation Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marked, on castors, very good condition Tube port ∅ 50 mm Air cooling Lrsdjvz U Eropfx Apten Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Tahun pembuatan: 2017, Kondisi: baik (bekas), evopro Test Bench Printing AmbientLight P585 Produsen: evopro systems engineering AG Deskripsi: Test Bench untuk Printing AmbientLight No. Proyek: P585 Nomor Seri: 0001 Tahun Pembuatan: 2017 Pasokan: 230 V / 50 Hz / 13 A (L+N+PE) Desain: Test bench tertutup untuk modul AmbientLight yang dicetak Struktur: Rangka profil aluminium dengan kabin pengujian lengkap Aplikasi: Pengujian optik dan fungsional untuk komponen pencahayaan atau AmbientLight Lrodeyrnazepfx Aptjn Lokasi: Schierling Kunjungan dapat dilakukan atas perjanjian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the enhanced safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but rather a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage devices. Special Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Application): - Conducts aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Long-duration and thermal cycling tests - Testing of both unpowered and cyclically powered cells - Highly precise and reproducible temperature control throughout the chamber - Ensures safe execution of tests under realistic thermal conditions - Suitable testing environment for R&D, automotive, e-mobility, and energy storage technologies Ideal For: - Battery and cell manufacturers - Research and development laboratories - Test labs & safety inspections - Automotive / e-mobility / energy storage sectors Ljdpfx Asx Hf A Rjptjrn P Plus Package transforms the KB 720 into a true battery safety test chamber: Integrated Safety Features: - Automatic and manual CO₂ fire suppression system - Smoke detector with visual and audible alarm - Mechanical double-door locking (secure containment) - Internal spark protection - Exhaust port with reversible overpressure flap - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual release for extinguishing system - Cable ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, in scenarios where fire or flames can occur without explosion or uncontrolled spread. It is not an abuse or destructive test device, but rather a safe, standards-compliant test chamber for real-world operating and fault scenarios. Technical Specifications: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power connection: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Summary – Why this device stands out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale value - Weight: approx. 285–300 kg - Condition: used Scope of Delivery: (See photo) (Subject to technical changes and errors. All details without obligation!) If you have any further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), Several touch probes from Heidenhain available for sale. - Manufacturer: Heidenhain - Model: TS110 / TS111 (untested) = €450 each TS110 / TS111 (tested) = €750 each TS220 / TS230 = €950 each ! As multiple probes are available, please specify the desired model when inquiring! Lsdpshlafnefx Aptorn - Taper: SK50

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 150-ton tool tryout press Clearance (installation height): 1000 mm Lrodpskw Rbajfx Apton Stroke: 600 mm Ram plate: 1500 mm x 1000 mm Table area: 1500 mm x 1000 mm Light curtain on front side Siemens control Weight: 12.5 tons

Kondisi: bekas, Tahun pembuatan: 2018, Rated power: 7.7 MW Ledpfx Aorr Ammjptorn Maximum power: 8.47 MW Rated speed: 1,150 rpm Maximum speed: 2,200 rpm Rated torque: 63,940 Nm Maximum torque: 70,330 Nm 8 MW gearbox test bench, closed circuit

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya,