Beli Pers Hidrolik Kolom Ganda bekas (26.304)

Kondisi: diremajakan ulang (bekas), Rexroth axial piston pump AKP140R with valve for ENGEL Ledpfjx Uqxasx Ac Hehk Type: AKP140R with valve Manufacturer number: R901021899 Model code: SYDFEE-20/140R

Kondisi: bekas, Tekanan 110 ton Jangkauan 290 mm Langkah 20-124 mm Jumlah langkah 60 / 90 langkah/menit Penyesuaian plunger 85 mm Luas meja sekitar 920 x 590 mm Luas plunger sekitar 530 x 280 mm Jarak antara meja dan bagian atas mesin press sekitar 450 mm Lubang untuk benda kerja di meja sekitar 180 x 300 mm Tinggi meja sekitar 750 mm Lubang pin pada plunger Ø 50 mm Ljdpfxet Ei Hno Ac Hohk Jam operasi 8214 jam Jarak antara meja dan bagian atas mesin press mm Berat mesin sekitar 5,5 ton Dimensi sekitar 2000 x 2000 x 2600 mm direkondisi di pabrik Helmerding pada tahun 2014, termasuk perubahan menjadi sistem kontrol keselamatan mesin press yang baru. Jam operasi yang tercatat sejak rekondisi 2014: 8214 Dokumentasi sistem kontrol keselamatan mesin press tersedia. Pelumasan terpusat elektrik Kombinasi kopling-rem hidraulik Pelat pelindung mekanis pada plunger Pengoperasian dengan kedua tangan Pengoperasian dengan kaki

Tahun pembuatan: 1980, jam operasional: 7.663 h, Kondisi: bekas, Pressing force: 320 t Throat depth: 800 mm Stroke: 630 mm Max. distance table/ram: 1000 mm Ram dimensions: 710 x 600 mm Table size: 800 x 1200 mm Working height: 1015 mm Oil capacity: 1100 l Lhedod Ih Nrepfx Ac Hek Operating hours: 7663 h Machine weight approx. 15 t Dimensions approx. 1600 x 2200 x 4800 mm Control cabinet dimensions approx. 1200 x 400 x 1800 mm Function tested. During the test run, it was noticed that the press ram is not 100% leak-proof. Additionally, the hand control cable has been repaired several times. The cover is missing, as it was removed by the customer to enable crane operation. Operating manual and electrical diagrams are available.

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Lhedpfed Ih Ncox Ac Hjk Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Ljdog S R Twepfx Ac Hjhk Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 500 t, panjang langkah: 400 mm, lebar meja: 1.600 mm, panjang meja: 900 mm, tahun perombakan terakhir: 2017, Perlengkapan: penghadang cahaya keselamatan, Dieffenbacher PO 500A Press A Dieffenbacher PO 500A press in very good technical condition, available for sale from a decommissioned stamping plant in Poland. Modernized in 2017 with a new Simatic S7 control system and new electrical cabinet. Lhodjv E Nlzspfx Ac Hek Equipped with optical safety barriers. The machine can be inspected under power – the press remains connected and operational.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1959, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 650 t, panjang langkah: 400 mm, lebar meja: 1.400 mm, panjang meja: 1.600 mm, berat keseluruhan: 90.000 kg, tinggi kerja: 1.600 mm, Perlengkapan: penghadang cahaya keselamatan, de-35.11284 Becker & van Hüllen 3-Phasen Presse Presse in sehr gutem technischen Zustand aus einer aufgelösten Presserei in Polen zu verkaufen. 2023 modernisiert. Neues Simatic S7 Steuerungssystem sowie neuer Schaltschrank. Optische Schutzeinrichtungen installiert. Besichtigung der Maschine im laufenden Betrieb möglich – Die Presse ist noch am Stromnetz angeschlossen. Lhsdpfx Aov Hpnljc Hek

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 630 t, lebar meja: 2.500 mm, panjang meja: 1.600 mm, berat keseluruhan: 100.000 kg, Perlengkapan: penghadang cahaya keselamatan, Müller ZE 625 4 Press A press in very good technical condition, available for sale from a decommissioned stamping facility in Poland. Lhjdpfov Hp T Uex Ac Hok Modernized in 2020. Equipped with a new Simatic S7 control system and a new electrical cabinet. Fitted with optical safety barriers. Possibility to inspect the machine under power – the press remains connected to electricity.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1969, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 160 t, panjang langkah: 650 mm, lebar meja: 1.200 mm, panjang meja: 800 mm, tinggi kerja: 600 mm, Perlengkapan: penghadang cahaya keselamatan, Lasco TSP 160S Lodpfsv E Rd Eex Ac Hshk Very well-maintained press available for sale from a decommissioned stamping facility in Poland. Upgraded in 2019: - Equipped with a new Simatic S7 control system - New electrical cabinet installed - Optical safety barriers fitted The machine remains fully connected to power and operational, allowing for inspection during actual operation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1962, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 970 mm, panjang meja: 1.600 mm, tahun perombakan terakhir: 2022, gaya bantalan cetakan: 40 t, Perlengkapan: penghadang cahaya keselamatan, Prensa Lasco FP 222 S Prensa en muy buen estado técnico a la venta por cierre de una planta de estampado en Polonia. Modernizada en 2022. Nuevo sistema de control Simatic S7 y nuevo armario eléctrico. Barreras ópticas instaladas. Posibilidad de comprobar la máquina en funcionamiento: la prensa sigue conectada a la corriente. Presse Lasco FP 222 S Presse en très bon état technique à vendre suite à la liquidation d’un atelier d’emboutissage en Pologne. Modernisée en 2022. Nouveau système de commande Simatic S7 et nouvelle armoire électrique. Barrières optiques installées. Possibilité de voir la machine en fonctionnement - La presse est toujours raccordée à l’alimentation électrique. Lhodpfx Aev E Efdsc Hek Lasco FP 222 S Presse Presse in sehr gutem technischen Zustand zu verkaufen aus einer aufgelösten Stanzerei in Polen. 2022 modernisiert. Neue Simatic S7 Steuerung und neuer Schaltschrank. Optische Schutzeinrichtungen installiert. Eine Besichtigung der Maschine im Betrieb ist möglich – Die Presse ist noch ans Stromnetz angeschlossen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, daya: 3 kW (4,08 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 16 t, panjang langkah: 100 mm, lebar meja: 440 mm, panjang meja: 320 mm, jarak antara tiang: 500 mm, kapasitas tangki oli: 60 l, panjang total: 1.040 mm, lebar total: 1.030 mm, tinggi total: 2.000 mm, Dijual: Mesin press hidrolik 16 ton dalam kondisi baik. HANS SCHOEN TES 16, mesin press hidrolik dua kolom Tahun pembuatan: 1986 Gaya tekan: 160 kN Daya motor: 3 kW, 380 V, 50 Hz Pengoperasian dua tangan Tinggi pemasangan: 280 mm Jangkauan stroke: 100 mm Lebar meja: 440 mm Kedalaman meja: 320 mm Dimensi mesin: Tinggi: 200 cm Lebar: 103 cm Panjang: 104 cm Lhjdpfxszf Ilcj Ac Hok Berat: 1000 kg.

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Lhedju Nfinspfx Ac Hok Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Lodeu Nfklspfx Ac Hshk Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Technical details: Pressure: 0.9 t Installation height (table/ram, top): 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Ledpfx Acou Nfw So Hjhk Height above ground: 935 mm Machine weight approx.: - t Machine dimensions approx. (LxWxH): 1.2 x 0.8 x 2.1 m Punch holder with M24x60mm internal thread Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Kondisi: bekas, Tahun pembuatan: 1982, en-GB-001 Lodpfou Nfmyex Ac Hjhk

Kondisi: bekas, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Through-hole in table: Ø 205 mm Ledsu Nfuqopfx Ac Hohk Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Additional technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t Ljdpsu Nfizefx Ac Hshk - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Belt and ram guards Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1969, en-GB:Technical details: Pressing force: 40 t Throat depth: 220 mm Stroke: 10 – 120 mm Ram adjustment: 63 mm Strokes per minute: 160 spm Distance table/ram: 300 mm Lhjdpeu Nfkxsfx Ac Hsk Table size (LxW): 440 x 620 mm Passage hole in table: Ø 200 mm Ram clamping surface: 400 x 250 mm Machine weight approx.: 2.52 t Machine dimensions approx. (LxWxH): 1.5 x 1.2 x 1.3 m A clamping plate (LxW: 440 x 620 mm) with a centre bore Ø 100 mm is mounted on the table. A steel plate 380 x 325 x 27 mm is mounted on the ram. The press is equipped with two-hand operation. fr-FR:Détails techniques : Pression : 40 t Profondeur de col de cygne : 220 mm Course : 10 - 120 mm Réglage du coulisseau : 63 mm Nombre de courses : 160 coups/min Distance table/coulisseau : 300 mm Dimensions de la table (Lxl) : 440 x 620 mm Ouverture traversante dans la table : Ø 200 mm Surface de bridage du coulisseau : 400 x 250 mm Poids de la machine env. : 2,52 t Dimensions de la machine (LxlxH) env. : 1,5 x 1,2 x 1,3 m Une plaque de bridage (Lxl : 440 x 620 mm) avec un alésage central Ø 100 mm est montée sur la table. Une plaque en acier de 380 x 325 x 27 mm est montée sur le coulisseau. La presse est équipée d'une commande bimanuelle. es-ES:Detalles técnicos: Presión: 40 t Cuello de cisne: 220 mm Carrera: 10 - 120 mm Ajuste del émbolo: 63 mm Carreras por minuto: 160 cpm Distancia mesa/émbolo: 300 mm Tamaño de la mesa (LxA): 440 x 620 mm Agujero pasante en la mesa: Ø 200 mm Superficie de sujeción del émbolo: 400 x 250 mm Peso de la máquina aprox.: 2,52 t Dimensiones de la máquina aprox. (LxAxH): 1,5 x 1,2 x 1,3 m En la mesa hay una placa de sujeción (LxA: 440 x 620 mm) con agujero central de Ø 100 mm. En el émbolo está montada una placa de acero de 380 x 325 x 27 mm. La prensa cuenta con control bimanual.

Kondisi: bekas, Tahun pembuatan: 1981, Technical Details: Pressing force: 30 t Clear width between uprights (WxD): 600/450 mm Installation height, table/ram top: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table size (LxW): 500 x 700 x Ø 60 mm Clamping surface of ram: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total connected load: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: may be used as a deburring press Additional technical features: - Table opening: 200 x 250 mm - Ram opening: Ø 160 mm - Gap in uprights: width 600 mm, depth 450 mm Lhsdpeu Nfmaefx Ac Hok - Operation via control panel Equipment: - Safety guard - Base plates

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: Pressure: 160 t Column spacing: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance table/ram: 600 mm Table height above floor: 550 mm Table surface: 810 x 860 mm Ram clamping area (D x W): 720 x 580 mm with T-slots Lhjdpfx Aeu Nfmmec Hok Total power requirement: 15 kW Machine weight approx.: 16.0 t Machine is not yet assembled. Pictures are from the sales location. Additional features: - Lateral passage (W x H): 520 x 620 mm - Front passage (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic unit - Oil cooler as per description.

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ljdpfxou N Ddwe Ac Hehk Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Tahun pembuatan: 2001, translate-001 Lhjdpfx Acoxna Uzo Hsk

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Lhjdpeu Icxqsfx Ac Hjk Hydraulic punching press for precision work (high-speed press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Sale as is, as a donor for spare parts or as a replacement machine. In stock. *

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Lhsdpfx Acsu N A Uuo Hok Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Lsdpou N A U Iofx Ac Hshk