Beli Rahsol Torque Wrench bekas (2.755)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 4.500 h, tegangan masuk: 400 V, jarak pergerakan sumbu X: 700 mm, jumlah slot dalam magazin alat: 21, produsen pengendali: fanuc, model controller: 31i model B5, pergerakan cepat sumbu Z: 60 m/menit, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, hidung spindel: BT 30 big plus, kecepatan spindel (maks.): 10.000 rpm, jam operasional spindle: 4.500 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, FULLY EQUIPPED TAPPING CENTER High torque/power version, equipped with: - Spindle taper with BIG PLUS interface - FANUC DDR-T: full 4th axis (direct drive motor) with braked tailstock and plate - Rotary joint for hydraulic supply to the center of the table (for automatic clamping/unclamping of workpieces) - Hydraulic unit for workpiece clamping - High-pressure through-spindle coolant - Belt-type chip conveyor - Automatic side door - Robot interface - RENISHAW TS-27 tool presetting system Machine in perfect condition with only 4,500 spindle hours! Ijdpfx Apeuby Sxevstg

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Heidenhain, model controller: iTNC 530, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 4.000 mm, lebar meja: 635 mm, berat keseluruhan: 11.500 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 10.000 rpm, jumlah spindel: 1, jumlah slot dalam magazin alat: 36, panjang alat: 340 mm, diameter alat: 70 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kontrol: Heidenhain iTNC 530 Perjalanan X [mm]: 2.000 Perjalanan Y [mm]: 600 Perjalanan Z [mm]: 800 Dimensi pemasangan PxLxT (mm): sekitar 7.500 x 4.500 x 3.100 mm Berat (kg): sekitar 11.000 Spindel: Kecepatan maksimum: 10.000 rpm Daya penggerak maksimum: 16 kW pada 40% ED Torsi maksimum: 80 Nm pada 40% ED Tipe holder alat: SK40 Kepala putar CNC: Rentang ayun: +/- 105° Iodpfx Asy Snhgepvetg Dapat dipilih antara mode kontinu atau dengan pengaturan dan penguncian Umum: Sistem pengukuran linier langsung pada sumbu X/Z/Y Majalah alat dengan 36 posisi Koneksi listrik: 400V/3Ph/50Hz Daya koneksi sekitar 55 kW Koneksi udara tekan: 6-8 bar Perlengkapan / Aksesori: Meja putar sesuai gambar Handwheel elektronik Konveyor serbuk

Kondisi: bekas, Tahun pembuatan: 2002, Detail Teknis: SCHÜTTE SG 18 Diameter maksimum batang bulat/persegi: 18 / 13 mm Iodpoymdd Sjfx Apvstg Diameter lingkar pitch spindle: 180 mm Panjang feeding batang: 80 mm Jangkauan gerak slide longitudinal (total / kerja): 63 / 50 mm Jangkauan gerak slide melintang (total / kerja): 32 / 20 mm Kecepatan spindle (tanpa tingkat): 800 – 10.000 rpm Waktu utama (tanpa tingkat): min./maks. 0,24 – 45 d Waktu sekunder: 0,30 d Penggerak utama: 11 kW Torsi motor feeding: 18 Nm Dimensi (termasuk panduan batang): sekitar P x L sekitar 5,5 x 1,3 m Berat: sekitar 5 t Tegangan: 400 V / 50 Hz Jam operasi: 14.304 jam Lingkup pengiriman: Bar feeder Pra 52 P IEMCA RUEZ KF0WW2/312 DAS, tahun 2002

Kondisi: bekas, - d1 = 35 mm, Itodpfx Apjlkclkjveg - d2 = 27 mm (wrench size), - Overall length: 195 mm.

Kondisi: bekas, d1: 35 mm d2: 27 mm (width across flats) Iodpfx Apelkclgevetg Total length: 115 mm - Available: 2 Price per piece: €25.00 + VAT

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.400 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, berat benda kerja (maks.): 6.000 kg, kecepatan rotasi (maks.): 10.000 rpm, panjang alat: 800 mm, Mesin baru HDC3000 dengan 6 sumbu • Gerakan sumbu X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 dengan handwheel • Meja putar NC untuk pemesinan 5 sisi 1250 mm x 1600 mm • Kepala bor/milling universal NC 2-sumbu, operasi simultan penuh dan posisi • Spindel 10.000 rpm HSK100, S1=220 Nm torsi spindel • Sistem pergantian alat HSK100 / 60 slot – alat hingga panjang 800 mm • Konveyor serpihan • Dioptimalkan untuk pemesinan 5 sisi termasuk pengeboran lubang dalam • Sistem pendingin • Sistem peniup udara dalam/luar • Pendinginan bertekanan tinggi (IKZ) 60 bar untuk pengeboran lubang dalam • Enklosur penuh • Area kerja besar, diameter 2300 mm • Termasuk kaki perata (leveling feet) Itjdpfxjy Sl Ecs Apvog • Termasuk pistol pencuci • Termasuk garansi • Waktu pengiriman singkat, penjualan antara waktu berlaku

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm Isdpfx Aoy Sl Dxopvetg • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Förderband BAND FÖRDERER – 600 mm / 800 mm / 1000 mm / 1200 mm BREITE in beliebiger LÄNGE 600 mm, 800 mm, 1000 mm, 1200 mm Förderbänder von FABO Company • Hochwertiges Reduziergetriebe der Marke Polat Itedpfxsy S Un Hj Apvjg • Antriebstrommeln sind gummiert und geriffelt • Bänder sind EP 125, 4-lagig, doppelt verklebt, 10 mm stark • Förderbandsystem mit Not-Aus-Sicherung • Alle Motoren sind von GAMAK oder gleichwertig • Seitenabstreifer-System verhindert Produktverluste in den Vorratsbereich während des Brechvorgangs • Getriebeeinheiten mit 3-facher Übersetzung, neue Generation mit Drehmomentverbindungssystem • Langlebige Laufrollen FÜR WEITERE INFORMATIONEN STEHEN WIR IHNEN JEDERZEIT GERNE ZUR VERFÜGUNG!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.274 h, gaya penekanan: 37 t, jumlah sumbu: 6, en-003 Isdpsx D D Hyefx Apvjtg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 67 h, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.300 rpm, jarak pergerakan sumbu X: 615 mm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 1.585 mm, berat keseluruhan: 16.600 kg, produsen pengendali: MAZATROL, jumlah sumbu: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine offers a robust tool magazine with 72 positions and is equipped with both a main and a secondary spindle to extend machining capabilities. If you are looking for high-quality turning and milling operations, consider the Mazak INTEGREX i-200 S turn-mill center. Contact us for further details. • Operating hours: Approx. 68 hours • Availability: Immediately • Key Features: • Full simultaneous 5-axis machining • Main spindle + secondary spindle • Milling spindle with automatic tool changer • Complete turning and milling in a single setup • Capacity and Working Area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (secondary spindle): Ø65 mm • Maximum supported mass (main spindle): 650 kg • Maximum supported mass (secondary spindle): 300 kg • Main Spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blast system: Included • Additional equipment: Heavy-duty spindle HD1; replacement of standard spindle cylinder and chuck • Secondary Spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling Spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: Oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool Capacities: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis Travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool System and Magazine Iedpjy Sltgjfx Apvotg • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Features: Tool breakage detection in magazine; overload protection • CNC Functions and Software • 5-axis machining functional package • Cutter radius compensation for 5-axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous threading with milling spindle • Cooling and Preparation • Through-tool coolant: 7 MPa • Prepared for oil mist extraction unit • Highlights • Practically as-new with only ~68 operating hours • Extensive factory configuration • Full simultaneous 5-axis machining • Main and sub-spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings over new purchase Additional Equipment • Chip and Parts Handling • Side chip conveyor – Consep type • Parts belt conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder magazine • Interface kit for bar feeder • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Miscellaneous Accessories • Mounting dowels for the machine • 3-color machine status signal lamp Technical Specification

Kondisi: bekas, Tahun pembuatan: 2006, Diameter of swing: 500 mm Turning length: 1300 mm Control: Fanuc 18i TB Spindle speed range (main spindle): 0 – 3,500 rpm Drive power (main spindle): 33 kW Max. torque: 800 Nm Number of tool stations: 12 axial / 12 direct positions Tool holder: VDI 40 Max. power: 8 kW Max. torque: 35 Nm Speed range – driven tools: 0 – 4,000 rpm X-axis travel: 318 mm Z-axis travel: 1,360 mm Y-axis travel: -60 / +80 mm Tailstock quill taper: MK 4 According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Machine includes: - Cooling unit for spindle head - Hollow chuck cylinder incl. draw tube - Emco interface for bar loader or feeder Ijdpfx Apoxrg Dwovjtg - Fanuc 18iTB control / Manual Guide dialog programming - Operator’s manuals - Coolant system integrated in chip conveyor with 3.5 bar coolant pump - Chuck flushing system - Control cabinet air conditioning - Hydraulic power unit - Hinged belt chip conveyor, discharge height: 1.15 m - Documentation / MaxxTurn 95 machine manual in German - CE certificate Accessories, depicted tools, and clamping devices are only included in the delivery scope if specifically mentioned in the additional information. Technical specifications and information are subject to change and error. Sale subject to prior sale!

Kondisi: bekas, Tahun pembuatan: 2015, 1141791590 Iedpfxoxq R Evj Apvjtg

Kondisi: bekas, Tahun pembuatan: 2012, Turning diameter 320 mm Itodpfxsxq Hkzj Apvjg Turning height 750 mm Control Siemens Max. spindle speed 4,500 rpm Main spindle drive power 26.8 / 20.9 kW Max. torque 256 / 200 Nm Spindle bore 52 mm Spindle nose KK A6 (DIN 55026) Max. chuck diameter 315 mm Number of tool stations 8 positions Tool holder Capto C5 Max. workpiece diameter 50 mm Max. workpiece weight 0.5 kg X-axis travel 450 mm Z-axis travel 300 mm Rapid traverse (X) 45 m/min / (Z) 40 m/min Total power requirement 68.3 kW Machine weight approx. 11.0 t Space requirements approx. L 3.7/4.2 x W 1.6 x H 3.0 m In our assessment, the machine is in very good condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are included in the scope of delivery only if stated in the additional information. Subject to changes and errors in technical data and specifications as well as prior sale!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840 D SL, berat keseluruhan: 21.000 kg, kecepatan spindel (maks.): 24.000 rpm, jumlah slot dalam magazin alat: 80, jumlah sumbu: 5, This 5-axis horizontal machining center SCHMID SE 368 was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverses of 75/40/90 m/min in X/Y/Z, and a pallet changer. Equipped with two NC rotary tilt units, a 30-station tool changer, and HSK-A63 tool holders. The maximum spindle speed is 10,000 rpm. Includes chip conveyor and recooling unit. An excellent opportunity to purchase this horizontal machining center SCHMID SE 368. Contact us for further details regarding this horizontal machining center. Additional Equipment • Dual spindle • Shuttle table • 2x 2 NC rotary-tilt units • Control cabinet system • Chip conveyor Knoll 600K-1, 2019 • Hydraulic unit • Filtration system • Recooling unit Lahntechnik KOF1803-100, 2020 • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping): n x 360°, vertical axis Machine Advantages Itjdpfxoyyuwwo Apvjg Technical Advantages • Ibag three-phase main drive: s1-100% 40 kW / s6-40% 52 kW • Key data of main spindle (kW s1): 3 12 29 40 40 • Spindle speeds approx. rpm: 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm: 27 27 27 19 17 • Tool diameter with free adjacent positions: 125 mm • Tilting table (NC / hydraulic indexing): vertical axis, 0° - 180°, max. swing angle in conjunction with 5th axis: +/- 150° • Rotary table diameter: 400 mm, rotary table (horizontal axes u1-u2/v1-v2), rotary table (NC / hydraulic clamping): n x 360°, vertical axis, rotary table diameter: 330 mm • Pallet clamping: 2 zero-point clamping modules/table • Position measuring systems: absolute position measuring systems • Position tolerance X - Y - Z: 0.008 mm (VDI/DGQ 3441) Additional information Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 27.713 h, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.250 mm, produsen pengendali: SIEMENS, model controller: 840D, tinggi total: 4.000 mm, lebar total: 6.000 mm, beban meja: 1.500 kg, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 7.500 rpm, daya motor spindle: 50.000 W, jumlah slot dalam magazin alat: 144, berat alat: 60.000 g, panjang produk (maks.): 6.000 mm, jumlah sumbu: 4, This 4-axis BW MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. This machine is interconnected with a BW MCX750 M2 (2011) and a pallet magazine and setup station (12 positions + 2 positions per machine + 2 setup stations). Contact us for further information. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of turrets/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27,713 h Additional equipment • OPTIONAL: Tool package • Group 1: approx. 700-750 tools (Ø up to 124.9 mm) • Group 2: approx. 100-150 tools (Ø 125-224.9 mm) • Group 3: approx. 50 tools (Ø 225-350 mm) Recent replacement of X-axis spindle and shaft seal on CTS (coolant through spindle) Geometry has been re-aligned (officially performed by BW) Iedpfx Apoy Amgievjtg The machine is interconnected with a BW MCX750 M2 (2011) and a pallet magazine and setup station (12 positions + 2 positions per machine + 2 setup stations) Technical Specification Taper size: SK 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 1.250 mm, produsen pengendali: SIEMENS, model controller: 840D, tinggi total: 4.000 mm, lebar total: 6.000 mm, beban meja: 1.500 kg, kecepatan spindel (maks.): 5.500 rpm, jumlah slot dalam magazin alat: 240, berat alat: 60.000 g, panjang produk (maks.): 6.000 mm, jumlah sumbu: 4, This 4-axis BW MCX750 M2 was manufactured in 2011. It features a large X-axis travel of 1100 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 1250 mm. The machine has a maximum pallet load capacity of 1500 kg and a magazine capacity of 240 positions. The machine is connected with a BW MCX750 M2 (2011) including a pallet magazine and a setup station (12 positions + 2 positions per machine + 2 setup stations). Please contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of turrets/magazines: 1 Itjdpfxoy Amhmj Apvjg • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage: 3x 400 V • Frequency: 50 1/s • Full-load current: 150 A • Main drive rated current: 85 A • Connected load: 80 kW 100 kVA • Operating voltage: 400 V • Control voltage: 24 DC • Frequency: 50 Hz • Power: 2.9 kW • Current: 11.0 A • Refrigerant: R134a • Filling capacity: 3.0 kg Additional equipment • OPTIONAL: Tool package (approx.): • Group 1: 700–750 tools (diameter up to 124.9 mm) • Group 2: 100–150 tools (diameter 125–224.9 mm) • Group 3: 50 tools (diameter 225–350 mm) Geometry readjusted (performed by official BW) The machine is connected with a BW MCX750 M2 (2011) including a pallet magazine and a setup station (12 positions + 2 positions per machine + 2 setup stations) Technical Specification Taper Size SK 50

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 15.000 W, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 250 mm, berat keseluruhan: 10.800 kg, jumlah sumbu: 8, This 8-axis Muratec MT 25 MY was manufactured in 2001. It features a maximum machining diameter of 370 mm and a maximum machining length of 920 mm. The machine is equipped with twin spindles and twin turrets, providing 15 live tool stations per turret. If you are looking for high-quality turning and milling capabilities, consider the Muratec MT 25 MY turning-milling center we have for sale. Please contact us for further details. • Configuration: Twin spindle / twin turret / twin Y-axis (9 controlled axes) • Control unit: Fanuc CNC (motors, servos, electronics) • Condition: Currently in operation; immediate availability • Travel paths: • X1: 230 mm • X2: 230 mm • Z1: 250 mm • Z2: 700 mm • Y: 100 mm (±50 mm) • Z3 (sub spindle): 750 mm • Capacity and range: • Max. machining diameter: 370 mm • Max. machining length: 920 mm • Bar capacity: 67 mm • Rapid traverse (X/Z): 20 / 25 m/min • Spindles (twin, identical): • Spindle nose: A2-6 • Torque: 420 Nm • Workpiece transfer: Automatic transfer between spindles with torque monitoring • Turrets and tool capacity: • Turrets: 2 (both with Y-axis and C-axis) • Stations: 15 per turret (all live/driven) • Driven tool speed: 3,000 rpm • Driven tool motor: 4 kW • Indexing time: 0.2 s • Construction and features: • Guideways: Solid box ways (prismatic) on all axes • Cleaning: Automatic air/coolant blower for sub spindle cleaning • Monitoring: Load control system and tool wear monitoring Additional equipment • Gantry loader: High-speed 3-axis gantry robot, 8 kg capacity (automatic loading/unloading) • Bar loader: 1.5 m CNC bar feeder Iedpfsy Shwhsx Apvjtg • Parts catcher: Automatic swinging arm for small finished parts • Parts conveyor: Integrated finished parts conveyor • Sample drawer: Independent area for in-process control • Chip conveyor: Hinged belt chip conveyor with rear discharge • Workpiece holding: 2 × Kitagawa 250 mm hydraulic chucks • Included tool holders: Complete set of static holders (OD/ID) and turning holders (axial/radial) Technical Specification Counter Spindle: No Driven Tools: No

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: FANUC, model controller: 18 iMB, tinggi total: 3.100 mm, lebar total: 2.300 mm, beban meja: 1.500 kg, berat keseluruhan: 7.200 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 18.500 W, jumlah slot dalam magazin alat: 30, panjang produk (maks.): 3.100 mm, jumlah sumbu: 3, TOYODA FV 1165 3-sumbu ini diproduksi pada tahun 2008. Mesin ini memiliki kecepatan putar spindle 12.000 rpm dan ukuran meja yang kokoh 1300 x 650 mm, dengan kapasitas beban meja maksimal hingga 1.500 kg. Mesin dilengkapi dengan kontrol FANUC 18 iMB dan kapasitas alat hingga 30 tool. Jika Anda mencari mesin CNC milling berkualitas tinggi, pertimbangkan vertical machining center TOYODA FV 1165 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Aplikasi: CNC Milling / Pemesinan Presisi • Torsi maksimum: 117 Nm • Kapasitas magazine alat: 30 alat Iodpfey Shb Tex Apvstg • Antarmuka alat: BT40 Big-Plus • Ukuran meja: 1300 x 650 mm Spesifikasi Teknis Ukuran tirus BT 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 65.155 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, lebar meja: 500 mm, panjang meja: 1.350 mm, beban meja: 550 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah slot dalam magazin alat: 22, jumlah sumbu: 4, This vertical 4-axis double machining centre AXA DBZ was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, a Y-axis travel of 500 mm, and a Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load capacity of approximately 550 kg. If you are looking for high-quality machining capabilities, you should consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Double machining centre with 2x 4th axis RTA 1-180 Automatic doors (compatible with robotic handling systems) Main spindle speed range 30–10,000 rpm Main spindle drive power approx. 30 kW (40% duty cycle) Max. torque approx. 143 Nm Tool holder SK 40 DIN 69871 / A Itjdpjy Sg I Eofx Apveg Internal coolant supply (water – air) Table clamping area 2 x 1,350 x 500 mm Max. table load approx. 550 kg Number of T-slots 3 T-slot width 14H9 mm T-slot spacing 160 mm 4th axis 2 x RTA 1-180 Number of tool positions 22 Tool diameter 85 mm Max. tool diameter with adjacent empty slot 135 mm Max. tool length 400 mm Tool change time 4.0 sec Rapid traverse X/Y 25 m/min Rapid traverse Z 20 m/min Feed force 9 kN Total power requirement 55 kVA Machine weight approx. 10.0 t Operating hours: 65,155 h Technical Specification Through-spindle coolant: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 8.100 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 rpm and a robust table size of 1321 mm x 495 mm, supporting a maximum table load of 794 kg. If you are looking for high-quality machining capabilities, consider the HAAS VF-4 vertical machining center we have for sale. Please contact us for further details. • Spindle taper: CT 40 • Maximum torque: 122.0 Nm at 2000 rpm • Table dimensions: 1321 x 495 mm • Max. table load: 794 kg • Tool changer: 20 positions (umbrella type) • Rapid traverse rate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm Itsdpfxey Sg H Uo Apvjg • T-slots: 5 slots, 16 mm width, 80 mm spacing • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 • Included machine options/features: 15" color monitor, rigid tapping, USB port Additional Equipment • Programmable coolant nozzle • Auger-type chip conveyor

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 12.719 h, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 850 mm, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 800 mm, panjang umpan sumbu Z: 850 mm, daya nominal (semu): 21 kVA, produsen pengendali: Heidenhain TNC 640 mit CELOS, berat benda kerja (maks.): 2.000 kg, tinggi total: 3.200 mm, panjang total: 4.500 mm, lebar total: 7.100 mm, lebar meja: 850 mm, panjang meja: 2.350 mm, kecepatan rotasi (min.): 15.000 rpm, kecepatan spindel (min.): 15.000 rpm, Year of manufacture: 2022 CNC control: Heidenhain TNC 640 with CELOS Axes X-axis travel [mm]: 2000 Y-axis travel [mm]: 800 Z-axis travel [mm]: 850 C-axis indexing [degrees]: 360º (0.001) B-axis indexing [degrees]: ±120 Rapid traverse [m/min]: 50 Axis acceleration [m/s²]: 5 Work table Pallet dimensions [mm]: 2350x850 Max. workpiece weight [kg]: 2000 NC milling/turning table: Pallet dimensions [mm]: Ø800 Max. workpiece weight [kg]: 800 Table rotation speed [rpm]: 50 Spindle Max. spindle speed [rpm]: 15000 Spindle drive power [kW]: 21/16 (40% ED/continuous) Spindle torque [Nm]: 111/85 (40% ED/continuous) Cooling Coolant supply through spindle [bar]: 40 Tank capacity [liters]: 600 Tool system Tool holder: SK 40 Number of tools in magazine: 40 Tool changer type: Double gripper Itjdpfey Shgvox Apvog With adjacent pockets empty [mm]: 130 With adjacent pockets occupied [mm]: 80 Max. tool length [mm]: 400 Max. tool weight [kg]: 8 Chip-to-chip time [sec]: from 7.5 Equipment Chip conveyor Fixed table with integrated rotary table Infrared probe Internal coolant supply Rinsing gun Blow air through spindle center selectable via M function Signal light Mist separator NC rotary tilting table Preparation for use of 3D quickSET MPC – Machine Protection Control Automatic workspace door Automation interface Machine runtime: Power-on hours: 18,669 Spindle operating hours: 12,719 Basic machine: Dimensions / Weight Length [mm]: 4500 Width [mm]: 7100 Height [mm]: 3200

Kondisi: baru, Tahun pembuatan: 2025, 1. Effektive Rohrlänge für den Schnitt: 6.500 mm / 9.200 mm Laserleistung: 6.000 W / 3.000 W / 2.000 W / 1.500 W Effektiver Schneiddurchmesser Rundrohr: Ø20–230 mm Effektiver Schneiddurchmesser Vierkantrohr: 20×20 mm – 160×160 mm Kantenlänge: 20–170 mm Außendurchmesser: ≤230 mm Zertifikate: CCC, CE, GS, ISO, SGS Laserquelle: IPG/MAX Garantie: 3 Jahre Stromversorgung: 110V/220V/380V, 50Hz/60Hz 1. Überragende Kapazität Der maximale Schneiddurchmesser der T-Serie ist 30 % größer als bei marktüblichen Maschinen; das maximale Schneidgewicht liegt 100 % über dem marktüblichen Standard. 2. Spannfutter-Positionskontrolle, Drehmomentregelung Das CNC-selbstzentrierende Spannfutter mit firmeneigenem Patent kann das Werkstück automatisch entsprechend der eingegebenen Rohrabmessungen spannen. Die Positionsüberwachung im Drehmoment-Modus garantiert, dass dickwandige Rohre sicher gespannt bleiben und dünnwandige Rohre nicht verformt werden. Neues staubgeschütztes Design für langanhaltenden, störungsfreien Einsatz. 3. Kanten- und Mittelpunktfindung Neue Funktion zur automatischen Kanten- und Zentrumserkennung. Die optimierte Kantenfindung und der verbesserte Algorithmus gewährleisten höchste Schnittpräzision und -stabilität. Ijdpfx Aog Hquwspvjtg

Kondisi: bekas, Tahun pembuatan: 2016, produsen pengendali: Siemens, model controller: 840 Dsl, description: General: Year of manufacture: 2016 Control: Siemens 840 Dsl Travel distances X/Y/Z: 3 mm Table size: 3,500 x 820 mm Maximum table load: 2,500 kg Spindle speed: 18,000 rpm Tool holder: SK 40 Spindle: Technology: Motor spindle Speed: 18,000 rpm Maximum power: approx. 35 kW Maximum torque: approx. 100 Nm Tool holder: SK 40 NC Swivel Head: Technology: Swivel head with milling spindle B-axis: +/- 110° Ijdpfxoy R Iw Ej Apvstg NC Rotary Table: Technology: Add-on rotary table A/C-axis: 360° Tailstock: For shaft machining (A-axis configuration) Tool Magazine: Technology: Traveling chain magazine Number of stations: 48 Tool changer: Double gripper Maximum tool diameter: 80 (130) mm Maximum tool length: 350 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: Through-spindle coolant system with filter, 70 bar Pendulum machining: Partition wall Shaft machining: A-axis + tailstock Workpiece measurement: Renishaw RMP 60 Tool measurement: Tool breakage monitoring Setup mode: Electronic handwheel Technology package: 5-axis milling

Kondisi: bekas, Tahun pembuatan: 1991, produsen pengendali: Siemens, model controller: 840 Dsl, Description: General Year of manufacture: 1991 / 2010 Control system retrofit: 2010 Control: Siemens 840 Dsl Swing diameter: 2,000 mm Turning diameter: 1,600 mm Turning height: 1,800 mm Table / Faceplate Itsdpfxoy R Iwxo Apvjg Technology: Gear-driven table Speed: 315 rpm Power: 105 kW Max. torque: 50,000 Nm Faceplate: 1,600 mm Max. table load: 12,000 kg Tool Carrier: Crossrail travel (vertical): 1,200 mm Tool slide travel: 1,500 mm Support travel (horizontal): 2,300 (+/-1,150) mm Plunge diameter: 340 mm Tool slide cross-section: 240 x 240 mm Equipment / Accessories: Tool magazine: 20 stations Chip disposal: Chip conveyor Coolant supply: Coolant system with filter Tool measurement: Measuring probe Setup mode: Electronic handwheel Tool holders: Various toolholders Control conversion: Conversion year: 2010 Technology: Siemens 840 Dsl NC Control: Sinumerik NCU 710.2 Motors: X/Z axes, ATC spindle Measuring systems: Direct measuring systems X/Z, ROD encoder table Control panels: Machine control panel, ATC operator panel Note: Further information available on request.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 311.153 km, daya: 338 kW (459,55 hp), pendaftaran pertama: 01/2024, jenis bahan bakar: diesel, berat keseluruhan: 8.460 kg, konfigurasi gandar: 4x2, jarak roda: 380 mm, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2024, jumlah silinder: 6, kapasitas silinder: 12.777 cm³, posisi setir: kiri, Perlengkapan: kemudi berkuasa, riwayat servis lengkap,