Beli Robust Sd 70/30 Kw bekas (63.632)

Kondisi: bekas, Tahun pembuatan: 2005, Tahun pembuatan: Nov 2005 Nomor seri: 305/70 R 19,5 Pgedpfx Aoxwku Rsbwsn BAN TRAILER BEKAS.

Kondisi: bekas, jarak tempuh: 37.100 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 10/2024, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, konfigurasi gandar: 2 gandar, bahan bakar: diesel, tipe perpindahan gigi: mekanis, suspensi: baja, jumlah tempat duduk: 2, lebar total: 2.040 mm, tinggi total: 2.590 mm, Perlengkapan: filter jelaga, kantung udara, kemudi berkuasa, komputer bawaan, kontrol traksi, pemanas jok, pendingin udara, pintu geser, sensor parkir, sistem immobilizer, sistem navigasi,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, daya: 3 kW (4,08 hp), gaya penekanan: 30 t, panjang langkah: 150 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 70 mm/dtk, kedalaman tenggorokan: 255 mm, panjang pelat penekan: 1.270 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, Standard Equipment Stroke: 150 mm Daylight (Ram Opening Height): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bushings - High-strength balance shaft and eccentric bearing system supporting parallelism - Mechanically limited stroke system inside cylinders with motor-controlled angle adjustment Pgodezcl S Nspfx Abwjn - Large opening and high stroke for different tooling options - Easy tonnage adjustment and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual-speed operation system: free descent, bending, and fast return - Multi-function foot pedal with CE-compliant emergency stop - Top-mounted compact hydraulic power unit with HAWE or Rexroth components - Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with memory for 500 programs, 200 lines per program - Program transfer via USB - Standard top and bottom tool set - NC-controlled motorized X-axis backgauge (500 mm) - Linear guide backgauge system - Positioning accuracy: 0.2 mm - Motor-controlled Y-axis angle adjustment - Movable control panel - Linear guide front support arms - Bottom die centering bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R axis - Special bending tools - Special pedal system with dual-hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Ton Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Frames: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Fast Approach Speed: 70 mm/s Throat Depth: 255 mm Daylight (Ram Opening Height): 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X Axis Motor: 0.55 kW Y Axis Motor: 0.18 kW Optional R Axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Kondisi: bekas, berat kosong: 5.240 kg, berat muatan maksimum: 35.760 kg, berat keseluruhan: 41.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 05/2018, inspeksi berikutnya (TÜV): 06/2027, suspensi: udara, ukuran ban: 385/55 22,5, jarak roda: 1.310 mm, warna: hitam, Tahun pembuatan: 2018, ukuran ban depan: 385/55 22,5, ukuran ban belakang: 385/55 22,5, kabin pengemudi: kabin harian, kelas emisi: tidak ada, Perlengkapan: ABS, pendaftaran truk,

Kondisi: bekas, daya: 0,55 kW (0,75 hp), kecepatan rotasi (min.): 178 rpm, kecepatan rotasi (maks.): 2.900 rpm, tegangan masuk: 380 V, frekuensi input: 60 Hz, Gear motor SEW yang andal untuk aplikasi industri. Beroperasi sangat tenang dan menawarkan daya kuat sebesar 0,55 kW – sangat cocok untuk teknik mesin atau teknologi konveyor. SEW-EURODRIVE WF30 DT80K4/TF/ACM/AT Jenis gearbox: Gearbox bevel WF30 Daya: 0,55 kW Podpfx Abow Hgilswegn Tegangan: 380–500 V / 50–60 Hz Arus: 1,90 A Kecepatan putar: 2900–178 rpm Torsi: sekitar 3,75 Nm pada 1400 rpm Desain konstruksi: IM M1B Perlindungan: IP54 Kelas isolasi: F Pelumas: SEW PG 400 S/NH-CL – 0,24 L Ukuran: Ma 28/33 Berat: 14,2 kg Mode operasi: S1 – operasi kontinu Faktor daya: cos φ 0,99 Tipe pemasangan: pemasangan kaki Asal: Jerman Harga berlaku untuk pembelian satu motor. Tersedia sekitar 52 unit secara keseluruhan. Pembelian sebagian dimungkinkan. Pengiriman & pengambilan tersedia.

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), vertical centrifugal pump Vertical Centrifugal Pump 30 m³/h Chemical Pump FIP ALPHA VCM 50-33 Year of manufacture: 2007 DN: 50 Nominal flow: 30 m³/h Nominal head: 25 m Pressure rating [bar]: 16 Temperature range [°C]: -25 to +140 Speed: 1450 rpm Pgedpfxsh T Dwfe Abwjn Electric power: 11 kW 400V 50Hz Motor speed: 1450 rpm Length: 1550 mm Width: 550 mm Design: Vertical, radially split volute casing pumps, sump or channel impeller Applications: Handling of paints, aggressive and process fluids, also suitable for liquids containing solid particles, in the chemical and petrochemical industries. If you require further information, we are here to help! Please contact us via the contact form or give us a call. Your listing was translated automatically. Translation errors may occur.

Tahun pembuatan: 2007, Kondisi: seperti baru (mesin pameran), The new industrial gas burner Cuenod C 120/160 GX507 is for sale. Power control is smoothly managed in two stages; modulating operation. Used fuel gas: G20 Maximum output: 1600 kW Minimum output: 230 kW Burner diameter: 227 mm Dungs MB-VEF 407 B01 S30 combustion controller Fan motor power: 2.4 kW Voltage: 230 / 400V 2 kW 50Hz IP47 Gas pressure: min 20 mbar / max 360 mbar Weight: 109 kg Year of manufacture: 2007 The CUENOD gas burner features cutting-edge technology for a stable gas-air mixture and low emissions. • Specially engineered burner head keeps NOx emissions below 80 mg/kWh. • Very low noise level (enclosed ventilation system). • Ventilation with the RHP® system for optimized combustion process. • Cubic design with cross-flow fan. • Shunt for measuring ionization current. • AGP® system ensures optimal air-gas ratio, CO2 emission control during the work cycle, and precise regulation of excess air flow for maximum efficiency of condensing boilers. Psdpfx Absd Aqqzewjgn Net price applies to commercial customers from EU member states. If you need more information, we are here to help! Please contact us via the contact form or call us. Your listing has been automatically translated. Translation errors may be present.

Kondisi: bekas, jarak tempuh: 607.408 km, daya: 260 kW (353,50 hp), pendaftaran pertama: 12/2003, jenis bahan bakar: diesel, jumlah tempat duduk: 38, tipe perpindahan gigi: otomatis, kelas emisi: Euro 3, warna: putih, Perlengkapan: ABS, pendingin udara,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Produktpalette, berat kosong: 4.900 kg, berat muatan maksimum: 33.100 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, panjang total: 7.450 mm, lebar total: 2.550 mm, suspensi: udara, ukuran ban: 385/65 R22,5", kondisi ban: 100 persen,

Kondisi: diremajakan ulang (bekas), ROLLFORMANLAGE Pgodjg Rkv Ejpfx Abwjn

Kondisi: bekas, Tahun pembuatan: 1990, MESIN ROLL FORMING BERAT Podpfx Ajymzzuebwjgn 10 STASIUN LEBAR: 260 mm

Kondisi: bekas, Tahun pembuatan: 1990, LINE ROLLFORMING BERAT Pedpoymzxyofx Abwjgn 9 STASIUN LEBAR: 450 mm

Tahun pembuatan: 1998, Kondisi: baik (bekas), Roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with stripping conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor unloader, loading telescopic conveyor, roller conveyor telescopic conveyor - Roller conveyor: fully electrically movable - Telescopic conveyor: extendable up to 10,620 mm - Roller width: 800 mm - Length: 5,230–10,620 mm - Load capacity: up to 50 kg/m - Working height: 1,615 mm - Transport dimensions: 5,230/1,320/H2,170 mm - Weight: approx. 2,000 kg Pjdpfxefmm Dbs Abwsgn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: Pgodpfxjb Ny Eys Abwsn + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur. Podox Af Rdopfx Abwjgn

Kondisi: baru, Tahun pembuatan: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide range of materials such as all types of residual wood, softwood, chipboard and fibreboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by a robust construction, ensuring consistent quality in continuous operation. We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a shipping company, and we will document the test with photos and videos. Machine Data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput rate 1 - 5 hopper fillings / h, Hydraulically operated pusher, Screen perforation of choice (10 - 40mm), Extraction port Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta start • Automatic shutdown when rotor runs idle • Removable extraction chute • Speed 70 - 100 rpm for increased throughput • Intermittent control to avoid idle times • Performance-enhancing step control of hydraulic pusher • Robust guides for the hydraulic pusher Additional shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Pgjdpfx Abjd Db N Ijwen Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - The moisture content (a.d.) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: bekas, berat kosong: 6.726 kg, berat muatan maksimum: 32.274 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 07/2018, inspeksi berikutnya (TÜV): 08/2026, panjang ruang muatan: 13.620 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 2.680 mm, volume ruang muat: 90 m³, panjang total: 13.620 mm, suspensi: udara, ukuran ban: 385/65 22,5, kondisi ban: 40 persen, warna: putih, Tahun pembuatan: 2018, jam operasional: 290.542 h, jarak tempuh: 290.542 km, ukuran ban depan: 385/65 22,5, ukuran ban belakang: 385/65 22,5, kabin pengemudi: kabin harian, kelas emisi: tidak ada, Perlengkapan: ABS, pendaftaran truk, tail lift,

Kondisi: baik (bekas), konfigurasi gandar: 3 gandar, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 9.000 kg, beban gandar yang diizinkan (gandar 3): 9.000 kg, pendaftaran pertama: 01/2016, suspensi: udara, ukuran ban: 385/55R22.5, jarak roda: 8.940 mm, warna: abu-abu, Tahun pembuatan: 2016,

Kondisi: bekas, jarak tempuh: 444.000 km, daya: 260 kW (353,50 hp), pendaftaran pertama: 12/2017, jenis bahan bakar: diesel, jumlah tempat duduk: 31, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, warna: putih, rem: retarder, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WFDFLT33802035478, berat kosong: 4.660 kg, berat muatan maksimum: 33.340 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, panjang total: 10.450 mm, lebar total: 2.550 mm, tinggi total: 1.325 mm, suspensi: udara, ukuran ban: 385/55 R22.5", kondisi ban: 100 persen, warna: abu-hitam,

Kondisi: bekas, berat muatan maksimum: 32.750 kg, berat keseluruhan: 42.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2026, inspeksi berikutnya (TÜV): 05/2027, Tahun pembuatan: 2026,

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 95 kW (129,16 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 729 kg, tegangan masuk: 400 V, lebar total: 920 mm, panjang total: 2.430 mm, tinggi total: 1.060 mm, masa garansi: 6 bulan, kapasitas pemanasan: 130 kW (176,75 hp), DE Pgsdpfxoy U U Tuj Abwon

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HTAT055HE - 2200389046, kapasitas pendinginan: 111 kW (150,92 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.536 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -20 °C, tegangan masuk: 400 V, tekanan: 3 batang, suhu: 7 °C, laju aliran volumetrik: 19 m³/jam, tekanan pompa: 1,26 batang, lebar total: 1.110 mm, panjang total: 3.415 mm, tinggi total: 2.270 mm, masa garansi: 3 bulan, Perlengkapan: Pelat tipe tersedia, Air-to-water heat pump, chiller – air-cooled, Manufacturer: MTA S.p.A. Model: Taurus HTAT 055/HE – 130 / 111 kW The Taurus HTAT 055/HE is a compact heat pump/water chiller, suitable for outdoor installation, including a hydronic kit (200 l tank + P15 pump) for low ambient temperatures down to -20°C, featuring electronic fan speed control (EC fans). Heating capacity: 130 kW Heating water temp. supply/return: 45 / 40°C Flow rate: 22.5 m³/h Available pump pressure: 1.03 bar Ambient temperature: +7°C Cooling capacity: 111 kW Chilled water temp. supply/return: 7 / 12°C Flow rate: 19 m³/h Available pump pressure: 1.26 bar Ambient temperature: 32°C Refrigerant: R 410A Pgjdpox Itfcjfx Abwjn Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Ph Max. power input (kW): 60 Max. current (A): 98 Start-up current per circuit (A): 312 Protection class: IP54 Dimensions: Length: 3415 mm, Width: 1110 mm, Height: 2270 mm Weight: 1536 kg Connection: Rp 2 1/2“ Serial no.: 2200389046 Year built: 2022 Condition: Visual 2, Technically OK Used (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, jam operasional: 47 h, MACHINE WITH ONLY 47 operating hours. Inspected by ERMAKSAN FRANCE. COMPLETE DATA AVAILABLE IN DOCUMENTS Pjdpfx Abercb Hqewjgn FANUC CONTROL

Kondisi: bekas, berat kosong: 1 kg, berat muatan maksimum: 38.999 kg, berat keseluruhan: 39.000 kg, konfigurasi gandar: 3 gardan, pendaftaran pertama: 06/2017, panjang ruang muatan: 13.400 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.650 mm, volume ruang muat: 87 m³, panjang total: 13.400 mm, suspensi: udara, ukuran ban: 385/65 22,5, kondisi ban: 60 persen, warna: kuning, Tahun pembuatan: 2017, ukuran ban depan: 385/65 22,5, ukuran ban belakang: 385/65 22,5, kabin pengemudi: kabin harian, kelas emisi: tidak ada, Perlengkapan: ABS, pendaftaran truk,