Beli Rosenboom Toolholder bekas (410)

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €55,100 Leasing rate: €1,041.39 Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Center height: 0 mm Spindle bore: 80 mm Swing diameter over cross slide: 400 mm Bed width: 400 mm Spindle mount / DIN55027: No. 8 Spindle taper: 90 M Infinitely variable spindle speeds in 3 ranges Spindle speed ranges: 20 - 100; 80 - 400; 400 - rpm Number of feeds: 120 Number of threads: 64 Hjdpfoyq Stpsx Aanonl Metric thread range: 0.5 - 120 mm Inch thread range: 60 - 1/4 TPI Module thread range: Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: 5 MT Tailstock quill stroke: 2 mm Motor power: 11 kW Length: 3,600 mm Width: 1,500 mm Height: 1,650 mm Weight: 3,110 kg Drive via variable gearbox (3 stages) 3-axis FAGOR digital readout with CSS (constant cutting speed) Quick-change tool post Amestra, Multifix system incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm Fixed center Main motor with frequency converter Rapid traverse (4) Longitudinal stop for single position Coolant system Rear chip guard along the entire machine length Leadscrew and feedshaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock with quick clamping Low-voltage machine lamp Operating instructions Equipment according to "CE" ADDITIONAL TURNING LENGTHS: Turning length 1,000 mm €52,250.00 Turning length 1,500 mm €53,290.00 Turning length 3,000 mm €59,990.00 Turning length 4,000 mm €65,540.00 Turning length 5,000 mm €80,860.00

Kondisi: baru, condition: new Country of origin: Bulgaria Price: €40,850 Leasing rate: €780.24 Swing over bed: 400 mm Distance between centers: 750 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN55027: Size 6 Spindle taper: 6 M Hodpfx Asyq Stioansnl Infinitely variable spindle speed ranges: 4 Infinitely variable spindle speeds: 18-98; 48-265; 144-790; 3 RPM Number of feeds: 80 Longitudinal feed: 0.015 - 0.6 mm/rev Cross feed: 0.0075 - 0.3 mm/rev Thread pitches: 40 Metric thread range: 0.25 - 7.5 mm Inch thread range: 120 - 4 TPI Module thread range: 0.0625 - 1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 MT Tailstock quill stroke: 100 mm Motor power: 7.5 kW Weight: 1,530 kg Drive via variable gearbox (4 steps) 3-axis FAGOR digital readout with CSS (constant cutting speed) Amestra quick-change tool post, system similar to Multifix incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Fixed center Coolant system Rear chip splash guard over full length Leadscrew and feed rod cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick clamping Low-voltage machine light Operating manual CE-compliant equipment OTHER TURNING LENGTHS Turning length 1,000 mm €41,580

Kondisi: baru, Condition: New Country of origin: Bulgaria Price: €133,520 Leasing rate: €2,523.53 Swing over bed: 1,320 mm Distance between centres: 3,000 mm Centre height: 625 mm Spindle bore: 155 mm Swing over cross slide: 940 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Infinitely variable spindle speeds in 4 gear ranges Spindle speed range (stepless): 3.7–15.6; 14.7–62; 58 rpm Number of feeds: 160 Longitudinal feed: 0.032–38.9 mm/rev Cross feed: 0.016–19.45 mm/rev Metric thread range: 0.5–480 mm Inch thread range: 1/16–60 TPI Module thread range: – Cross slide adjustment: 685 mm Top slide adjustment: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill travel: 260 mm Motor power: 30 kW Weight: 8,550 kg Drive via variable gearbox (4 ranges) 3-axis FAGOR digital readout with CSS (constant cutting speed) Amestra quick-change tool post, Multifix-type system, incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN 6350, Ø 500 mm Fixed centre Hnedpfsyq Stcex Aanel Coolant system Rear chip splash guard along the entire length Leadscrew and feed rod cover Chuck guard Tool post guard Levelling bolts and plates Reducing sleeve for tailstock quill Tailstock traverse powered by electric motor Low-voltage machine lamp Operating manual Equipment in accordance with CE OTHER AVAILABLE TURNING LENGTHS: Turning length 1,500 mm €118,670.00 Turning length 4,000 mm €141,700.00 Turning length 5,000 mm €153,040.00 Turning length 6,000 mm €169,840.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €127,060 Leasing rate: €2,401.43 Swing diameter over bed: 1,090 mm Distance between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN 55027: size 15 Spindle taper: 160 M Stepless spindle speed ranges in 4 stages Stepless spindle speed: 3.7 - 15.6; 14.7 - 62; 58 RPM Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric threading range: 0.5 - 480 mm Imperial threading range: 60 - 1/16 TPI Module thread range: DP thread range: 240 Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Hedpeyq Sr Sjfx Aanenl Tailstock quill travel: 260 mm Motor power: 30 kW Weight: 8,050 kg Drive via variable gearbox (4 speed ranges) 3-axis digital readout by FAGOR with CSS (constant surface speed) Amestra quick-change tool post, compatible with Multifix system, incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed centre Coolant system Rear chip guard along full length Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Tailstock quill reducing sleeve Tailstock movement via electric motor Low-voltage machine lamp Operating manual Equipment according to “CE” FURTHER TURNING LENGTHS AVAILABLE: Turning length 1,500 mm €112,010.00 Turning length 4,000 mm €135,240.00 Turning length 5,000 mm €146,580.00 Turning length 6,000 mm €163,380.00

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €50,390 Leasing rate: €952.37 Swing diameter over bed: 500 mm Distance between centers: 1,500 mm Center height: 250 mm Spindle bore: 75 mm Swing diameter over cross slide: 0 mm Bed width: 400 mm Spindle mount / DIN55027: Size 8 Spindle taper: 80 M Spindle speeds, stepless within 3 ranges Spindle speed ranges, stepless: 25–100; 100–400; 500–2,000 rpm Number of feeds: 120 Longitudinal feed: 0.04–12 mm/rev Cross feed: 0.02–6 mm/rev Metric thread range: 0.5–120 mm Imperial thread range: 60–1/4 TPI Module thread range: — DP thread range: 240–1 Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: 5 Morse Tailstock quill stroke: 2 mm Motor power: 11 kW Length: 3,100 mm Width: 1,250 mm Hnsdpfx Asyq Srfeanjl Height: 1,400 mm Weight: 2,800 kg Drive via variable gearbox (3 ranges) 3-axis digital readout by FAGOR, with CSS (constant cutting speed) Quick-change toolpost Amestra, system similar to Multifix, incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm Fixed center Longitudinal stop for one position Coolant system Rear chip splash guard along the entire length Lead screw and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick lock Low-voltage machine lamp Operating manual Equipment according to CE ADDITIONAL TURNING LENGTHS: Turning length 1,000 mm €49,250.00 Turning length 2,000 mm €52,100.00 Turning length 3,000 mm €57,090.00 Turning length 4,000 mm €62,740.00 Turning length 5,000 mm €78,160.00

Kondisi: baru, en-GB:Condition: new Country of origin: Bulgaria Price: €460 Leasing rate: €2,276.69 Swing diameter over bed: 890 mm Distance between centres: 3,000 mm Centre height: 400 mm Spindle bore: 155 mm Swing diameter over cross slide: 490 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Infinitely variable spindle speeds in 4 ranges Stepless spindle speeds: 3.7 - 15.6; 14.7 - 62; 58 rpm Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Imperial thread range: 60 - 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 30 kW Weight: 7,500 kg Drive via variable gearbox (4 speed ranges) 3-axis FAGOR digital readout with CSS (constant cutting speed) Quick-change toolpost Amestra, Multifix system, including 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed centre Coolant system Full-length rear chip splash guard Leadscrew and feed shaft guard Hodpsyq Sq Usfx Aansnl Chuck guard Toolholder guard Levelling bolts and plates Reduction sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine lamp Operating manual CE-compliant equipment ADDITIONAL TURNING LENGTHS: Turning length 1,500 mm €105,510.00 Turning length 2,000 mm €109,230.00 Turning length 4,000 mm €128,740.00 Turning length 5,000 mm €139,980.00 Turning length 6,000 mm €156,880.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Hnjdoyq Sn Tjpfx Aanel Price: €85,520 Leasing rate: €1,616.33 Swing diameter over bed: 760 mm Centre distance: 3000 mm Centre height: 380 mm Spindle bore: 132 mm Swing diameter over cross slide: 520 mm Bed width: 560 mm Spindle mount / DIN55027: size 11 Spindle taper: 140 M Infinitely variable spindle speeds in 3 gear ranges Spindle speed range (infinitely variable): 7–42; 28–170; 165–1 RPM Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: Cross slide adjustment: 410 mm Top slide adjustment: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: MT6 Tailstock quill travel: 225 mm Motor power: 15 kW Weight: 4470 kg Drive: variable gearbox (3 speed ranges) 3-axis digital readout (FAGOR) with CSS (constant cutting speed) Quick-change tool post Amestra, system like Multifix incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed centre Main motor with frequency converter Rapid traverse (4) Foot brake Longitudinal stop for single position Coolant system Rear full-length chip guard Leadscrew and feed rod cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical tailstock movement Low-voltage machine lamp Operating instructions Equipment in accordance with “CE” OTHER TURNING LENGTHS: Turning length 1,500 mm: €71,280.00 Turning length 2,000 mm: €74,190.00 Turning length 4,000 mm: €91,680.00 Turning length 5,000 mm: €104,390.00 Turning length 6,000 mm: €1,230.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €24,940 Leasing rate: €478.85 Swing over bed: 325 mm Distance between centers: 750 mm Center height: 165 mm Spindle bore: 32 mm Swing over cross slide: 190 mm Bed width: 200 mm Spindle mount / DIN 55027: Size 5 Hnodpfx Ajyq Sngsanjl Spindle taper: 4.5 M Stepless spindle speeds in 2 gear ranges Stepless spindle speed: 85–405 rpm; 470–2,200 rpm Number of feeds: 48 Longitudinal feed: 0.006–1.77 mm/rev Cross feed: 0.003–0.885 mm/rev Metric thread pitch range: 0.1–28 mm Module thread pitch range: 0.1–1.75 DP thread pitch range: 70–4 Cross-slide travel: 150 mm Top-slide travel: 95 mm Tailstock quill diameter: 40 mm Tailstock taper: 3 MT Tailstock quill stroke: 100 mm Motor power: 2.2 kW Length: 2,150 mm Width: 950 mm Height: 1,350 mm Weight: 770 kg Drive via variable gearbox (2 ranges) 3-axis digital readout FAGOR with CSS (constant surface speed) Quick-change toolpost Amestra, Multifix-compatible system incl. 4 holders (3 x rectangular, 1 x round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm Fixed centre Coolant system Rear splashguard along entire length Leadscrew and feed shaft guard Chuck guard Toolpost guard Levelling bolts and plates Tailstock with quick clamping Low-voltage machine lamp Operating manual Equipment according to “CE” OTHER TURNING LENGTHS: Turning length 1,000 mm €25,360,-

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €60,660 Leasing rate: €1,146.47 Swing diameter over bed: 6 mm Distance between centers: 2,000 mm Center height: 315 mm Spindle bore: 103 mm Swing diameter over cross slide: 4 mm Bed width: 400 mm Spindle nose / DIN55027: 11 Spindle taper: 120 M Stepless spindle speed in 3 ranges Spindle speed (stepless): 16–63; 63–250; 315– rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Metric thread range: 0.5 – 120 mm Hedpjyq Sm Nofx Aanenl Imperial thread range: threads/inch Module thread range: Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: 5 MT Tailstock quill travel: 2 mm Motor power: 11 kW Weight: 3,310 kg Drive via variable gearbox (3 ranges) 3-axis digital readout FAGOR with CSS (constant cutting speed) Quick-change toolholder Amestra, system compatible with Multifix incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3204 / DIN6350, Ø 315 mm Fixed centre Longitudinal stop for one position Coolant system Rear full-length chip guard Leadscrew and feed shaft cover Chuck guard Toolholder guard Levelling bolts and plates Tailstock with quick clamp Low-voltage machine lamp Operating manual Equipment in accordance with “CE” OTHER TURNING LENGTHS: Turning length 1,000 mm: €57,710.00 Turning length 1,500 mm: €58,850.00 Turning length 3,000 mm: €65,550.00 Turning length 4,000 mm: €71,000.00 Turning length 5,000 mm: €86,620.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €91,920 Leasing rate: €1,737.29 Swing diameter over bed: 860 mm Distance between centers: 3,000 mm Center height: 430 mm Spindle bore: 135 mm Swing diameter over cross slide: 620 mm Bed width: 560 mm Spindle mount / DIN 55027: Size 11 Spindle taper: 140 M Spindle speed infinitely variable: 7 - 42; 28 - 170; 165 - 1 RPM Number of feeds: 150 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 9 mm/rev Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/6 TPI Module thread range: DP thread range: 240 Cross slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: Morse Taper 6 Tailstock quill stroke: 225 mm Motor power: 15 kW Weight: 4,650 kg Drive via variable gearbox (3 stages) 3-axis digital readout FAGOR with CSS (constant cutting speed) Quick-change tool post Amestra, system compatible with Multifix incl. 4 tool holders (3 rectangular, 1 round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Main motor with frequency inverter Rapid traverses (4) Foot brake Longitudinal stop for one position Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool post guard Levelling bolts and plates Tailstock with quick-clamp Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine lamp Operating manual Equipment according to “CE” FURTHER TURNING LENGTHS: Turning length 1,500 mm €77,680.00 Turning length 2,000 mm €80,590.00 Turning length 4,000 mm €98,080.00 Turning length 5,000 mm Hsdpfx Aajyq Sm Asnenl €110,890.00 Turning length 6,000 mm €124,730.00

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 420 mm, produsen pengendali: Selca, model controller: S1200, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 6.000 rpm, Perlengkapan: dokumentasi / manual, Mesin buatan Italia, ideal untuk pengerjaan mekanik presisi pada baja dan paduan. Mesin ini dilengkapi dengan kontrol Selca S-1200, memiliki 3 sumbu (X-Y-Z) dan magazin alat. Struktur kolom bergerak dengan meja alur T. Dijual lengkap dengan pemegang alat ISO 40, ragum, dan perlengkapan lain seperti pada foto. Hodpfxeyxz R Uj Aansnl

Kondisi: bekas, Tahun pembuatan: 2023, Condition: used Year of manufacture: 2023 Stock number: 1675 Delivery time: prompt, subject to prior sale Country of origin: Bulgaria Price: €17,600 In stock: 1 unit Swing diameter over bed: 325 mm Distance between centers: 1000 mm Center height: 165 mm Spindle bore: 32 mm Swing diameter over cross slide: 190 mm Bed width: 200 mm Spindle mount / DIN55027: 5 Spindle taper: 4.5 M Number of spindle speeds: 12 Spindle speed range: 85 – 2,000 rpm Number of feeds: 48 Longitudinal feed: 0.006 – 1.77 mm/rev Cross feed: 0.003 – 0.885 mm/rev Metric thread range: 0.1 – 28 mm Inch thread range: 75 – 2.5 TPI Module thread range: 0.1 – 1.75 Cross slide travel: 150 mm Top slide travel: 95 mm Tailstock quill diameter: 40 mm Tailstock taper: 3 MT Tailstock quill travel: 100 mm Motor power: 2.2 kW Length: 2,150 mm Width: 950 mm Height: 1,350 mm Weight: 770 kg Demonstration machine / as-new condition Net price (list price €21,690) Drive via gear transmission 3-axis digital readout Fagor 40i Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm Fixed centre Coolant system Rear chip splash guard over full length Leadscrew and feed shaft cover Chuck guard Tool post guard Levelling bolts and plates Tailstock with quick-clamping Low-voltage machine light Operating manual Equipment in accordance with “CE” Including the following option: 1 longitudinal stop Hnodewirwyspfx Aanol Other center distances available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 415 mm, produsen pengendali: BROTHER, tinggi total: 2.360 mm, beban meja: 200 kg, berat keseluruhan: 4.600 kg, kecepatan spindel (maks.): 12.000 rpm, Pusat Pemesinan Vertikal Brother TC 32B ini dibuat pada tahun 2007 di Jepang. Dilengkapi dengan kontrol Brother, mesin ini memiliki 3 + 1 sumbu dan meja bundar. Spindel BT30-nya dapat bekerja dengan kecepatan hingga 12.000 rpm. Perlengkapan tambahan • Konveyor serpihan • Remote flyer • Meja putar Kitagawa Keunggulan mesin Hodpfx Asyi Ehkjanjnl Keunggulan teknis mesin: • 3 + 1 sumbu • Dudukan alat: acak 26 posisi • Gerak cepat: 70-70-70 m/menit • Palet: 2 / 600 x 425 mm Dimensi Kedalaman mesin: 3.700 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jumlah sumbu: 3, This 3-axis vertical honing machine GEHRING 630-1 LR was manufactured in 2017. It is equipped with a HAINBUCH quill with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction sleeves. The machine is ideal for precision honing applications. Please contact us for further information regarding this machine. Hodjyap Uispfx Aansnl Additional equipment: • HAINBUCH hexagonal clamping sleeve, Ø65 mm – Quantity 1 • HAINBUCH alignment screwdriver – 3 pieces • HAINBUCH drawbar adapter – Quantity 1 • Cable (unspecified) – Quantity 2 • Clamping tool (unspecified) – Quantity 1 • Internal coolant collector – Quantity 1 • Hydraulic tool holder VDI40, Ø20 (ISCAR) – Quantity 8 • MAPAL holder D12, Ø13, part no. (unspecified) – Quantity 4 • Reducing sleeve for hydraulic holder, 20→13 mm – Quantity 6 • MAPAL carbide reamer plate "Axel 92-R-0N" – Quantity 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) – Quantity 1 • Hydraulic holder for reduction sleeve ISCAR 20→14 – Quantity 3 • Chisel/tool holder DIN 69880 - E2 - 40×40 – Quantity 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) – Quantity 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 40.396 h, produsen pengendali: SIEMENS, model controller: 840D powerline, DMG Gildemeister CTX410 ini diproduksi pada tahun 2006. Mesin ini memiliki kecepatan spindle sebesar 5.000 rpm, revolver alat dengan 12 posisi, serta alat bertenaga di 3 posisi. Diameter lubang tembus adalah 65 mm. Pertimbangkan untuk membeli mesin bubut horizontal DMG Gildemeister CTX410 ini. Hubungi kami untuk informasi lebih lanjut. • Revolver alat: 12 posisi • Alat bertenaga: 3 posisi Hjdpfx Aaex U S Enensnl • Tipe dudukan alat: VDI 40 • Lubang tembus: 65 mm • Waktu pengiriman berdasarkan kesepakatan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, daya motor spindle: 11.000 W, tinggi total: 2.120 mm, berat keseluruhan: 5.500 kg, panjang produk (maks.): 2.900 mm, jumlah sumbu: 3, This DMG Mori Seiki NLX1500MC/500 horizontal lathe was manufactured in 2014. It offers a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret featuring 12 live stations, this is a unique opportunity to acquire a DMG Mori Seiki NLX1500MC/500 horizontal lathe. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all live), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status indicator • Air-conditioned control cabinet • Condition/Availability: Machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus, size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm Hjdpfx Aaoyg Icljnsnl • Hexagonal collet: 14 mm • Tool measuring probe • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, kecepatan spindel (maks.): 4.700 rpm, jarak pergerakan sumbu X: 194 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 640 mm, daya motor spindle: 21.000 W, tinggi total: 2.345 mm, berat keseluruhan: 7.900 kg, produsen pengendali: SIEMENS, model controller: Sinumerik 840 D, jumlah sumbu: 3, This 3-axis MAS SP280 SY was manufactured in 2013. This machine is ideal for precision horizontal turning and has maintained robust functionality despite its age. A solid choice to enhance your machining processes. Contact us for further information. Additional Equipment • Accessories: 2x 3-jaw chucks / turning tool holders / driven radial tool holders / axially driven tool holders Additional Information • Spindle nose (DIN 55026): A6 • Max. spindle torque Mh S1/S6 - 40%: 200 / 257 Nm • Max. bar capacity: 81 mm • X-axis: Ballscrew diameter/pitch: 32 / 12 mm • Z-axis: Ballscrew diameter/pitch: 40 / 15 mm • Y-axis: Ballscrew diameter/pitch: 32 / 12 mm • Max. turning diameter: 280 mm • Max. turning length between centers: 490 mm • Software version: Version: V01.04 +SP02 / no integrated safety option • Tool turret: Number of positions: 12 • Toolholder clamping shank diameter DIN 69880: 40 mm • Tool size: 25x25 mm Hodpfsx D Nt Ejx Aanenl • Max. tool spindle speed S3-40%: 4000 min⁻¹ • Torque S1/S3 - 40%: 27 / 40 Nm Option: Cylindrical surface interpolation: The control can process mantle C and mantle Y axes Dimensions Machine depth: 3875 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 2.041 h, kecepatan spindel (maks.): 2.800 rpm, produsen pengendali: SIEMENS, model controller: SIEMENS 828D, jumlah sumbu: 2, This Romi C 510 was manufactured in 2014. It features a hollow spindle with a spindle bore diameter of 65 mm, a wedge-bar manual chuck with a diameter of 260 mm, and hardened guideways. The toolholder is a Multifix quick-change toolpost type B K22. The machine operates with a standard speed range of 56–2800 rpm and is equipped with automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, you should consider the Romi C 510 we have for sale. Please contact us for more information. Additional Equipment • Console: Automatic longitudinal cycle with activation of the console recess. Machine Advantages Hodpox D I Iujfx Aanjnl Technical advantages of the machine: • Automatic functions: Tool clamping, guideway hardening, milling spindle speed switching, frame cycles, and guideway lubrication. • Special versions: Fully equipped, manual speed control, reduced speed range, manual clamping, numerical display for contract manufacturing, and air-conditioned version without controls. • Guideways: Hardened and coated opposing surfaces. • Climb milling: Automatic device included. • Automatic tool clamping. Additional Information Special machine versions: Raised milling spindle headstock, automatic frame cycles, and adaptation to foreign standards according to machine description: CNC horizontal lathe - ROMI C 510 V5.0 – SIEMENS Standard version: Siemens 828D sl control system with 10.4” TFT color display. ASA A2-6" spindle nose, maximum torque: 303 Nm, or ASA A2-8", maximum torque: 408 Nm, with 520 mm swing over bed, 450 mm swing over cross-slide, and 255 mm swing over compound slide. Tailstock with manual positioning of the main body and manual actuation of the quill (fixed center) MK-4. Rapid traverse longitudinal/cross 10,000 mm/min. Removable chip tray. Electrical system available for the following voltages/frequencies: 400V AC / 50-60Hz. Sealed work area lamp. ROMI RMMP manual machine package including CNC-controlled main carriage with two electronic handwheels for X and Z axes, joystick switches, and user-friendly Siemens "Manual Machine Plus" software. Multifix K22 type B adapter plate with Multifix quick-change toolholder B K22. Drag device for tailstock. Automatic lubrication with inline filter and level sensor. Cooling system complete with coolant tank and coolant pump (10 l/min, @7 bar, 1.5 kW / 2 hp). Coolant spray gun with additional pump. Electrical control cabinet with cooling via centrifugal fan and overpressure. Splash guard, complete, protective door with safety window and locking via electric safety switches. Screws and nuts for leveling. Screwdriver set for system operation. Complete documentation for the ROMI product on CD. Standard paint finish: Textured epoxy Munsell Blue 10B-3/4 and textured epoxy grey RAL 7035.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jumlah sumbu: 9, NAKAMURA-TOME WY150 9-sumbu ini diproduksi pada tahun 2023. Mesin ini adalah pusat turning-milling dengan peralatan lengkap berupa pemegang alat, termasuk 6 pemegang eksternal, 4 pemegang internal, 3 pemegang alat putar radial (berpenggerak), dan 12 pemegang alat putar aksial (berpenggerak), serta satu chuck collet dan satu chuck tiga rahang. Manfaatkan kesempatan untuk membeli pusat turning-milling NAKAMURA-TOME WY150 ini. Silakan hubungi kami untuk informasi lebih lanjut. Perlengkapan tambahan • 6 pemegang alat eksternal • 4 pemegang alat internal • 3 pemegang alat putar radial (berpenggerak) • 12 pemegang alat putar aksial (berpenggerak) • 1 chuck collet • 1 chuck tiga rahang Hodpfxoyb Sako Aanonl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, beban meja: 680 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, berat alat: 5.000 g, jumlah sumbu: 3, This 3rd generation HAAS VF-2SSYT CNC vertical machining center from 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a 30+1 tool capacity. The machine has seen minimal use and is in excellent condition. It offers travel distances of 762 mm on the X-axis and 508 mm on both the Y and Z axes. Take advantage of this opportunity to acquire the HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max. torque: 122 Nm @ 2000 rpm • Drive: Inline direct-drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/oil injection • Tool changer: • Type: SMTC Hsdpfjykrz Hjx Aanenl • Capacity: 30+1 tools • Max. tool diameter: 64 mm (127 mm if adjacent slot is empty) • Max. tool length: 279 mm • Tool-to-tool time: 1.8 s • Chip-to-chip time: 2.4 s • Feed rates: • Max. cutting feed rate: 21.2 m/min • Rapid traverse rates (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis drive motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirement: • Air consumption: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th axis ready Additional equipment: • Mist/fume extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil separator • Renishaw probing system • 2 machine vices • Complete set of high-quality toolholders, milling cutters, and drills

Kondisi: bekas, Tahun pembuatan: 2008, 159560 Hnedpfx Aaewvl Aienjl

Kondisi: bekas, Tahun pembuatan: 2000, 1 Hnodpsvh Ncrsfx Aanel

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 540 mm, jarak gerak sumbu Z: 850 mm, kecepatan spindel (maks.): 1.500 rpm, diameter putar di atas sled silang: 1.000 mm, panjang total: 2.510 mm, tinggi total: 3.546 mm, lebar total: 4.155 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, tinggi pembubutan: 825 mm, diameter pemasangan: 1.000 mm, diameter benda kerja (maks.): 1.100 mm, berat keseluruhan: 16.000 kg, VERTICAL LATHE WITH MOTORIZED TOOLING TECHNICAL SPECIFICATIONS: Travels: - Maximum swing diameter: 1,100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1,000 mm - X-axis travel: 500 + 40 mm - Z-axis travel: 850 mm Spindle: - Maximum speed: 1,500 rpm - Spindle nose: ASA A2-15 - Max workpiece weight (including chuck): 1,250 kg Turret: - Number of positions: 12 - Maximum speed: 3,000 rpm - Turret interface: BMT-85 Feed rates: - Rapid traverse X - Z: 20 - 20 m/min - X-axis ballscrew: diameter 50 x 8 mm - Z-axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37 - 45 kW - Motorized tool motor: 7 kW - X - Z axes servomotors: 4 - 7 kW Hnodpfxoyxg N As Aanjl General information: - Length: 2,510 mm - Width: 4,155 mm - Height: 3,546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - 0i-TF Plus CNC control (15'') Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, ethernet, and USB ports - Belt-driven spindle, 1,500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for driven tools - Chip conveyor - High pressure pump 15 BAR - Three-color signal and end-of-cycle lamp - Integrated work light - Machine support feet - Toolbox with service keys - Air blow system through spindle - Upgraded turret driven tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Pressure release (dual pressure) - Renishaw M.T.P. manual tool presetting - Oil skimmer - Static tool holder kit - Fume extractor predisposition - Black color NEW MACHINE READY FOR IMMEDIATE DELIVERY

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 532 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 325 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 430 mm, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan rotasi (maks.): 5.000 rpm, panjang total: 2.875 mm, diameter luar chuck: 260 mm, lebar total: 1.675 mm, hidung spindel: A2-8, berat keseluruhan: 4.650 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kami telah mengambil alih HWACHEON HI-TECH 200BL MC ini dalam kondisi berjalan langsung dari produksi. Lihat video mesin yang beroperasi sebelum pembongkaran. Mesin ini sangat lengkap dan secara standar dilengkapi dengan: Hedpfx Aeypc H Reanjnl - Sumbu C + turret penggerak (kedua posisi). - Probing measurement Renishaw. - Konveyor serbuk + bak penampungan. - Chuck 3-jaw Röhm (DURO-NC 260/3) termasuk 2 set rahang pelapis. - 13 buah holder alat EWS, 4 di antaranya digerakkan. - Berbagai bushing dan collet penjepit. - Dokumentasi asli HWACHEON dan FANUC. Mesin dapat dilihat dalam kondisi berjalan di showroom kami!

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large components for mechanical, automotive, aerospace, or energy industries. Technical Specifications: Max turning diameter: 560 mm Max distance between centers: 2,000 mm Center height: approx. 280–300 mm (to be confirmed per machine) Cross-slide travel: approx. 550 mm Spindle: CNC FANUC, variable speed depending on configuration Tailstock and quill: suitable for machining long, precise workpieces Hedpfxsyc Tico Aansnl Chuck: 4-jaw or 6-jaw (depending on configuration) Equipment and Features: FANUC Oi-TD CNC: flexible programming and automatic cycles Cast iron guideways for rigidity and precision Integrated lubrication system and chip tray Tool post and modular turret (depending on configuration) Optional accessories for threading, taper turning, or long workpieces Dimensions and Weight: Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) Weight: approx. 7–9 tons Key Advantages: Large capacity: 560 mm turning diameter × 2,000 mm between centers Reliable, widely used FANUC CNC for maintenance and programming Robust and accurate machine, suitable for demanding workshops