Beli Sick Sicherheitslichtvorhang bekas (249)

Kondisi: belum diuji (bekas), Tahun pembuatan: 1969, en-001 Fsdew H I R Rspfx Ailopi

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights L-R: 2,060 mm Table clamping area approx.: 2,000 x 520 mm Ram clamping area approx.: 2,040 x 520 mm Working speed: 4-20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Machine weight approx.: 14 t Height above floor level approx.: 4,810 mm Oil capacity approx.: 700 l Standard equipment The press is equipped with a frontally extendable sliding table, which can be extended by 500 mm. Water cooler, SICK light curtains at the front and rear, SIEMENS S7-300. Fodpfx Asuqd Nusilopi

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights (L-R): 2,060 mm Table clamping surface approx.: 2,000 x 520 mm Ram clamping surface approx.: 2,040 x 520 mm Working speed: 4–20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Machine weight approx.: 14 t Height above floor approx.: 4,810 mm Oil capacity approx.: 700 l Standard equipment The press is equipped with a frontally extendable sliding table which can be extended by 500 mm. Fsdpfxouqd S Ao Ailjpi Water cooler SICK light curtains at the front and rear

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R201204B9, berat keseluruhan: 252 kg, Perlengkapan: penghadang cahaya keselamatan, DETAIL TEKNIS Kontrol Model kontrol: A05B-2611-B382 Nomor seri kontrol: E20110087 Gripper Tipe: Gripper vakum Penggerak: Zona tunggal DETAIL MESIN Berat total: 252 kg Jam operasi: sekitar 1.000 jam PERALATAN Fjdoy Hiy Tepfx Ailepi Pembatasan keselamatan oleh Allen Bradley PLC Sick laser scanner, 2 unit Sensor penghalang cahaya, 4 unit

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Fpsdpfx Aev Rwu Ujilji Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Kondisi: baik (bekas), Tahun pembuatan: 1977, Pressing force 250 t Upright distance 1,120 mm Stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface 1,100 x 900 mm Table height above floor 950 mm Lateral upright clearance 700 mm Ram surface 1,100 x 900 mm Fedpfx Aiox Ug Dolepi Speed down mm/s Speed up mm/s Working speed mm/s Oil capacity 730 l Drive power 56 kW Weight 25 t Space requirements (WxDxH) 2.3 x 1.55 x 3.96 m Additional Information with electro-hydraulic drive, hydraulic (20) and electrical control system according to UVV, light curtain (Sick), upper and lower stroke limit, pressure- and travel-dependent controllable, cut shock absorber, short-stroke control, new control (Mitsubishi), safety control (PNOZ Multi), screen control with touch screen, control cabinet

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top platen Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Throughput rate: approx. 20 pallets/hour (depending on pallet height and wrap type) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 control panel • Control: SIEMENS PLC S7 1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable position stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic detection of pallet height • Film clamp for attaching film to pallet load • Automatic film cutting system at end of wrapping cycle • Frequency inverter to adjust turntable speed: 5 to 15 rpm • Frequency inverter to adjust film carriage speed Fsdjwxrh Depfx Ailjpi • Powerstretch 250 % • Film sealing with hot-pad and counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter to control conveyor at the turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3 phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL PROPERTIES > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Max. roll weight: 16 kg > Max. roll outer diameter: 250 mm Driven outfeed roller conveyor, with double chain sprockets, frequency-controlled Length 1470 mm Usable width 1000 mm Height 500 mm Roller diameter 89 mm Pitch 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4 Safety fences, height: 2200 mm with access door, dual-channel safety magnetic sensor integrated into safety control system

Kondisi: baru, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram surface: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil capacity: 200Control / key switch: 1. Set-up mode: Manual without light sensor (max. 10mm/sec. speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs. Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110 mm/sec – Retract 200 mm/sec – Pressure: 9 mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design possible) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator's console Safety PLC – SICK Light sensors SICK 700 + 150mm Fedpfx Aiem Nntyjlepi Linear measuring scale for setting stroke length 9” PLC screen – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm indicator for malfunctions (light & sound) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: bekas, Tahun pembuatan: 1983, druck_techdaten_01 Fpedpfsym Dz Djx Ailei

Kondisi: baru, Pressure: 100Motor: 11Installation height: 500Stroke length (max.): 400Ram adjustment: 790 x 600Table height: Floor to top edge of table – 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmApproximate weight: 5,500 kgOil filling: 200 lType: Hydraulic C-frame pressCapacity: 100 tons at 230 bar Controls / Key switch modes: Fodpfjwrkctox Ailspi - Set-up mode – Manual, without light curtain - Automatic mode – Full speed with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 pcs, Ø 50 x 30 mm - Auxiliary guides: 2 pcs, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 l/min, Helical gear pump Speeds: - Advance: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components from REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Speed adjustable via PLC - Air cooler - Pre-fill valve - Pressure holding valve Control accessories: - Siemens S7-1200 control system - Main control cabinet - Safety PLC from SICK - Light curtains from SICK (700 mm) - Linear scale for stroke adjustment - 10" touchscreen from BEIJER (German & English) - Movable two-hand control - Ethernet connection for remote maintenance - Fault indicator with visual and audible signal - Dual work area lighting - Side safety doors (outward opening) - Hydraulic proportional valves - Dual-channel safety control - Operating manual & parts list (German) - Complies with current machinery directive EN 693 Oil quantity: 220 litres (tank volume: 250 litres) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 Light Grey & RAL 7016 Anthracite Grey

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Hydraulic PLC Press 100 ton (1.000 kN) daya tekan Seri Siemens PLC1200 Fsdpfenp Ndhjx Ailepi Layar Beijer 10" Stroke 400 mm Meja kerja 790 mm x 600 mm Kecepatan maju 110 mm Kecepatan mundur 140 mm Tirai cahaya Sick Modul perawatan jarak jauh terpasang Hidrolik Rexroth dengan pendingin Tersedia mulai minggu ke-46 di area pameran Stuttgart Perubahan dapat dilakukan sesuai permintaan

Kondisi: bekas, Double Column Hydraulic Press SCHÖN Type SH 25 Machine No.: 4453 Year of manufacture: 1999 Pressing force: 25 t Column spacing: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection: 380 Volt, 50 Hz Equipment: - SICK safety light curtain, type FGS 300-11 Fodpfxew A Amrj Ailopi - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press dwell extension 1-10 s (pressure holding time) - Time setting for return stroke speed - Blowing device prepared electrically, without air valve - Hydraulic tool safety, manually adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1,200 kg Good condition

Kondisi: bekas, 1 Fodpev Srfwjfx Ailopi

Kondisi: baru, Pressure: 150 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 900 x 600 Ram surface: 900 x 600 Table height: 850 Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 Weight approx.: 8000 Oil filling: 400 Hydraulic C-Frame Press General information: Construction type: C-frame design, hydraulic Press force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Painting: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Fodpfxowzzzfj Ailjpi Control system: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft start Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measurement system: Linear scale (500 mm) Touchscreen: 9“ Siemens, storage for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external integration (e.g. robot, coil line) Work area lighting (dual) Hydraulic system: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 ccm, 65 l/min – REXROTH Auxiliary pump: available Tank volume: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram safety lock (top dead center position) Pressure & speed adjustable via PLC Mechanical data: Mounting height: 500 mm (distance ram – table plate) Stroke length: 400 mm Mounting depth: 650 mm Throat: 350 mm Table height: 850 mm (floor to top of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & electronics: Main control cabinet Pressure & speed setting via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Screen: 9“ Siemens touchscreen Remote maintenance via Secomea module Safety & operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding backwards) Operating manual & parts list (German), including maintenance schedule

Kondisi: baru, en-GB Fpsdpjwmwvcofx Ailji

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Fedpfjmpfwdjx Ailjpi

Kondisi: baru, Hydraulic Double-Column Press 250 tons KK Kletzer Technical Data: - Maximum Stroke Length: 400 mm - Table Height: 900 mm (from floor to tabletop upper edge) - Installation Height: 600 mm (max. distance between table and ram plate) - Speeds: - Approach: 120 mm - Pressing: 13 – 4 mm - Return: 170 mm/sec - Pump Output: 103 L/min (REXROTH axial piston pump) - Motor: 22 kW – 1500 rpm - Dimensions (LxWxH): 2000 x 3200 x 4300 mm - Approx. Weight: 10,000 kg - Oil Volume: approx. 700 L (Tank capacity: 800 L) Capacity: - 250 tons (at 245 bar) Operation: - Via key switch - Manual/Set-up mode via two-hand operation without light sensor - Automatic mode via two-hand operation with full speed and light sensor Cylinders: - Main Cylinder Ø 350 mm - Auxiliary Cylinders: 2 pcs. Ø 80 x 60 mm Plates: - Table Plate: 1000 x 1000 mm, with T-slots - Ram Plate: 1000 x 1000 mm, with T-slots & spring welds Frame clearance width: 1,100 mm Hydraulic System: - Block & valves (REXROTH), hydraulic accessories mounted atop the press - Pre-fill valve - Hydraulic & mechanical ram locking - Pressure adjustment via PLC (min. pressure 35 tons) - Speed adjustment via PLC - Pressure-hold valve for 600 sec. - Air cooler (temperature control adjustable via screen) - Automatic guideway lubrication (adjustable via screen) - Work area laterally closed with sheet metal wall - Guide rails for parallelism Fsdpfjgta Rcox Ailjpi - Auxiliary motor: 5.5 kW + 2.2 kW - Auxiliary pump: 22 cc + 5.5 cc - Protective railings around hydraulic unit, side climbing ladder Control & Automation: - SIEMENS S7-1200 control system - Main control cabinet - Swiveling operator panel - Soft starter for main motor - Safety PLC: Sick - PLC screen: 9’’ Siemens - Mobile two-hand operation - Linear scale for stroke adjustment: 450 mm NOVOTECHNIK - Light sensors front & rear: SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance (Siemens) - Working area illumination (dual) - 8 free I/O on the PLC - Automatic pressure compensation in case of loss Documentation: - User manual (German) - Hydraulic diagrams - Electrical diagrams Notice: The price indicated is approximate and subject to change due to fluctuating steel prices.

Kondisi: baru, pk100_excenterpresse_2024_de Fpodpfor I H Dgex Ailsi

Kondisi: baru, Pressure: 60Motor: 11Mounting height: 450Stroke length (max.): 400Table size: 600 x 500 x 80Ram surface: 600 x 500 x 90Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,700Weight approx.: 4,000Oil capacity: 200Control / Key switch: 1. Setup mode manual without light sensor (max. 10 mm/sec speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guides: 2 pcs Ø 40 mm Motor: 7.5 kW – 11 hp (IE-3) Pump: 18 cc – 26 liters / ASC Speed: Advance 110 mm/sec – Return 120 mm/sec – Pressure: 11 mm – 5/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table plate) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 60 tons) Speed adjustable via PLC Air cooler Pre-fill valve Fedpfjmmuq Isx Ailjpi Control accessories: Siemens S7-1200 Main control panel Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear encoder for stroke adjustment 7” PLC display – Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double work area lighting 8 free I/O channels on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: baru, Pressure: 125 t Slide Adjustment: (automatic adjustment) 40 mm Stroke Length (max.): 10–125 mm Total Power Requirement: 11 kW Weight approx.: 8,000 kg Fedpfxsktm N De Ailspi Dimensions (LxWxH): 1,800 x 1,500 x 2,600 mm Technical Data Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Slide Size: 700 × 500 mm with pin hole Stroke Adjustment: 20 – 125 mm Slide Adjustment: 40 mm Shut Height: 475 mm Accessories & Features Control System: Siemens S7-1200 PLC Operator Screen: 9” Siemens Touch Panel Precise stroke adjustment directly via display Adjustment of min. & max. stroke rate Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in control cabinet Safety light barriers: SICK, PILZ, or LEUZE (Category 4, CE-compliant) 2 rupture plates included in scope of delivery Lower support plate for secure transport Anti-reach protection for maximum occupational safety Pneumatic clutch & brake combination The machine stands out due to its exceptionally comprehensive standard configuration at the highest technical level. The use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and durability.

Kondisi: baru, Pressure: 150 Slide adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10-125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50-90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7-1200* Stroke adjustment: directly via the control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Guide: internal and external eccentric guidance Crankshaft: made of hardened steel 4140 Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand as well as foot pedal operation possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure for the working area External connections: 8-pin I/O at the PLC (for signal exchange & expansions) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: machine and equipment according to CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Pressing force: 150 t Fsdstqwtdepfx Ailepi - Table size: 750 x 1000 mm (fixed table) - Stroke length: 10-125 mm, automatic stroke length adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin reception & T-slots as per customer specifications) - Strokes: 50 – 90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm - Weight approx.: 9,500 kg - Slide adjustment: 40 mm (automatic adjustment)

Kondisi: baru, Pressure: 125Motor: 22Mounting height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode manual without light sensor (max. 10mm/sec travel speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Fpsdpomr Hpcofx Ailoi Auxiliary guide: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Advance 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm - 5 mm/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (custom design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed weld) Table height: 850 mm (floor to upper table edge) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (10 – 125 tons) Adjustable speed via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling control console Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm system for faults (light & sound) Double workspace lighting 8 free I/Os at the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors are retractable to the rear)

Kondisi: baru, Capacity: 100 t Strokes per minute: 50 spm Table clamping surface: 900 x 700 mm Slide dimensions: 500 x 350 mm Stroke adjustment: 20 - 130 mm Ram adjustment: 100 mm Installation height: 400 mm EEP-PK100 – Eccentric Press Technical Data Capacity: 100 t Strokes per minute: 50 spm Fodpfsv Hin Esx Ailspi Table size: 900 × 700 mm Ram size: 500 × 350 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Features & Accessories Control system: Siemens S7-1200 PLC Operating screen: Siemens 9’’ touchscreen Stroke adjustment directly via display Setting of min. & max. stroke count Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety design in control cabinet Light curtains: SICK, PILZ, or LEUZE (category 4, CE-compliant) CE-compliant safety system 2 rupture disks – included in delivery Lower support plate for secure transport Underrun protection – for maximum occupational safety Pneumatic clutch and brake combination The machine impresses with an exceptionally comprehensive standard equipment package at the highest technical level. Use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and longevity.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 13.000 h, Model: Amada HFE M2 103t x 3110 3m, Press Brake 4 sumbu Fsdpfxoyym Hwo Ailopi Tahun: 2011 Daya Tekan: 100 ton Maks. Panjang Tekuk: 3110 mm Panjang Langkah: 200 mm Kecepatan Pendekatan: 1 - 100 mm/detik Kecepatan Penekukan: 1 - 10 mm/detik Kecepatan Kembali: 1 - 100 mm/detik Kapasitas Oli: 110L Daya Motor: Berat: 6600 kg Perlindungan: Layar cahaya mesin Erwin Sick terpasang, pagar pengaman samping dan belakang dengan interlock Dimensi: Panjang Mesin: 4535 mm Kedalaman Mesin: 2580 mm Tinggi Mesin: 2680 mm Jarak antara bingkai samping: 2705 mm Lebar balok: 60 mm Tinggi meja: 960 mm Tinggi terbuka: 470 mm Kedalaman tenggorokan: 420 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, AMADA MODEL ITS2 50-20 50 Ton x 2000 mm CNC Press Brake Hidrolik 5 Sumbu, lengkap dengan Operateur 1 kontrol CNC 4 sumbu. Dilengkapi pelindung elektronik Erwin Sick yang dipasang di mesin, pagar samping dan belakang dengan sistem interlock. Tahun: 1993 Deskripsi: Jenis hidrolik upstroking Tekanan bending: 50 ton Panjang bending: 2000 mm Tinggi terbuka: 370 mm Panjang stroke: 100 mm Kedalaman tenggorokan: 400 mm Fsdepygydspfx Ailspi Lebar meja: 60 mm Jumlah sumbu: 4 Konfigurasi sumbu: X1-X, Y1-Y2, R1-R2, Backgauge Bisa didemonstrasikan dalam kondisi teraliri listrik. Brosur dan informasi lebih lanjut tersedia atas permintaan.